gxl_p231_1g_m8s_dvb.dts

#include "gxl_p231_1g.dts"

/{
	le-dt-id = "gxl_p231_1g_m8s_dvb";
	emmc {
		status = "disabled";
	};

	nand {
		status = "okay";
	};

	ethernet@0xc9410000{
                interrupts = <0 8 1>;
        };


	sysled {
		led_gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
	};

	dvb {
		compatible = "amlogic,dvb";
		dev_name = "avl6762";
		ts0 = "parallel";
		ts0_control = <0x0>;
		ts0_invert = <0x0>;
		fec_reset_gpio-gpios = <&gpio GPIODV_13 GPIO_ACTIVE_HIGH>;
		power_ctrl_gpio-gpios = <&gpio GPIODV_11 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "p_ts0";
		pinctrl-0 = <&dvb_p_ts0_pins>;
		resets = <&clock GCLK_IDX_DEMUX &clock GCLK_IDX_ASYNC_FIFO &clock GCLK_IDX_AHB_ARB0 &clock GCLK_IDX_HIU_PARSER_TOP>;
		reset-names = "demux", "asyncfifo", "ahbarb0", "uparsertop";
	};

	dvbfe {
		compatible = "amlogic,dvbfe";
		//dev_name = "dvbfe";
		status = "okay";
		dtv_demod0 = "Avl6211";
		dtv_demod0_i2c_adap_id = <2>;
		dtv_demod0_reset_value = <0>;
		dtv_demod0_reset_gpio-gpios = <&gpio GPIODV_13 GPIO_ACTIVE_HIGH>;
		dtv_demod0_power_gpio-gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH>;
		fe0_dtv_demod = <0>;
		fe0_ts = <0>;
		fe0_dev = <0>;
	};
};

&pinmux {
	dvb_p_ts0_pins:dvb_p_ts0_pins {
		amlogic,setmask = <0x2 0x1f>;
		amlogic,clrmask = <0x3 0x787 0x2 0xff000400>;
		amlogic,pins = "GPIODV_0", "GPIODV_1", "GPIODV_2", "GPIODV_3", "GPIODV_4", "GPIODV_5", "GPIODV_6", "GPIODV_7", "GPIODV_8", "GPIODV_9", "GPIODV_10";
	};
};


&i2c_b {
	status = "okay";
};