sdm845-mtp.dtsi

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
 */

#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/gpio/gpio.h>
#include "sdm845-pmic-overlay.dtsi"
#include "sdm845-pinctrl-overlay.dtsi"
#include "sdm845-camera-sensor-mtp.dtsi"

&qupv3_se10_i2c {
#include "smb1355.dtsi"
};

&vendor {
	bluetooth: bt_wcn3990 {
		compatible = "qca,wcn3990";
		qca,bt-vdd-io-supply = <&pm8998_s3>;
		qca,bt-vdd-xtal-supply = <&pm8998_s5>;
		qca,bt-vdd-core-supply = <&pm8998_l7>;
		qca,bt-vdd-pa-supply = <&pm8998_l17>;
		qca,bt-vdd-ldo-supply = <&pm8998_l25>;

		qca,bt-vdd-io-voltage-level = <1352000 1352000>;
		qca,bt-vdd-xtal-voltage-level = <2040000 2040000>;
		qca,bt-vdd-core-voltage-level = <1800000 1800000>;
		qca,bt-vdd-pa-voltage-level = <1304000 1304000>;
		qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;

		qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */
		qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */
		qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */
		qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */
		qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */
	};
};

&soc {
	gpio_keys {
		compatible = "gpio-keys";
		label = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&key_vol_up_default
			     &key_cam_snapshot_default
			     &key_cam_focus_default>;

		vol_up {
			label = "volume_up";
			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <115>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};

		cam_snapshot {
			label = "cam_snapshot";
			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <766>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};

		cam_focus {
			label = "cam_focus";
			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <528>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};
	};
};

&labibb {
	status = "ok";
	qcom,qpnp-labibb-mode = "lcd";
};

&dsi_dual_nt35597_truly_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 52 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_nt35597_truly_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 52 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
	qcom,platform-te-gpio = <&tlmm 10 0>;
};

&dsi_nt35597_truly_dsc_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
	qcom,panel-mode-gpio = <&tlmm 52 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_nt35597_truly_dsc_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
	qcom,panel-mode-gpio = <&tlmm 52 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
	qcom,platform-te-gpio = <&tlmm 10 0>;
};

&dsi_sim_vid {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_sim_vid {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_sim_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_sim_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_sim_dsc_375_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_sim_dsc_375_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_nt35597_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 52 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_nt35597_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 52 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
	qcom,platform-te-gpio = <&tlmm 10 0>;
};

&pmi8998_wled {
	qcom,string-cfg = <3>;
	status = "okay";
};

&pmi8998_haptics {
	qcom,vmax-mv = <2400>;
	status = "okay";
};

&mdss_mdp {
	#cooling-cells = <2>;
};

&ufsphy_mem {
	compatible = "qcom,ufs-phy-qmp-v3";

	vdda-phy-supply = <&pm8998_l1>; /* 0.88v */
	vdda-pll-supply = <&pm8998_l26>; /* 1.2v */
	vdda-phy-max-microamp = <62900>;
	vdda-pll-max-microamp = <18300>;

	status = "ok";
};

&ufshc_mem {
	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm8998_l20>;
	vcc-voltage-level = <2950000 2960000>;
	vccq2-supply = <&pm8998_s4>;
	vcc-max-microamp = <600000>;
	vccq2-max-microamp = <600000>;

	qcom,vddp-ref-clk-supply = <&pm8998_l2>;
	qcom,vddp-ref-clk-max-microamp = <100>;

	status = "ok";
};

&sdhc_2 {
	vdd-supply = <&pm8998_l21>;
	qcom,vdd-voltage-level = <2950000 2960000>;
	qcom,vdd-current-level = <200 800000>;

	vdd-io-supply = <&pm8998_l13>;
	qcom,vdd-io-voltage-level = <1808000 2960000>;
	qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep", "ds_400KHz",
			"ds_50MHz", "ds_100MHz", "ds_200MHz";
	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &storage_cd>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>;
	pinctrl-2 = <&sdc2_clk_ds_400KHz
			&sdc2_cmd_ds_400KHz &sdc2_data_ds_400KHz>;
	pinctrl-3 = <&sdc2_clk_ds_50MHz
			&sdc2_cmd_ds_50MHz &sdc2_data_ds_50MHz>;
	pinctrl-4 = <&sdc2_clk_ds_100MHz
			&sdc2_cmd_ds_100MHz &sdc2_data_ds_100MHz>;
	pinctrl-5 = <&sdc2_clk_ds_200MHz
			&sdc2_cmd_ds_200MHz &sdc2_data_ds_200MHz>;

	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;

	status = "ok";
};

&pmi8998_switch1 {
	pinctrl-names = "led_enable", "led_disable";
	pinctrl-0 = <&flash_led3_front_en>;
	pinctrl-1 = <&flash_led3_front_dis>;
};

&pmi8998_switch2 {
	pinctrl-names = "led_enable", "led_disable";
	pinctrl-0 = <&flash_led3_iris_en>;
	pinctrl-1 = <&flash_led3_iris_dis>;
};

&vendor {
	mtp_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "fg-gen3-batterydata-itech-3000mah.dtsi"
		#include "fg-gen3-batterydata-ascent-3450mah.dtsi"
		#include "fg-gen3-batterydata-demo-6000mah.dtsi"
	};

	extcon_usb1: extcon_usb1 {
		compatible = "linux,extcon-usb-gpio";
		vbus-gpio = <&pmi8998_gpios 8 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";
		pinctrl-0 = <&usb2_vbus_det_default>;
	};
};

&pmi8998_fg {
	qcom,battery-data = <&mtp_batterydata>;
};

&smb1355_charger_0 {
	status = "ok";
	qcom,disable-ctm;
};

&smb1355_charger_1 {
	status = "ok";
	qcom,disable-ctm;
};

&qupv3_se9_2uart {
	status = "ok";
};

&qupv3_se8_spi {
	status = "ok";
};

&qupv3_se3_i2c {
	status = "ok";
	nq@28 {
		compatible = "qcom,nq-nci";
		reg = <0x28>;
		qcom,nq-irq = <&tlmm 63 0x00>;
		qcom,nq-ven = <&tlmm 12 0x00>;
		qcom,nq-firm = <&tlmm 62 0x00>;
		qcom,nq-clkreq = <&pm8998_gpios 21 0x00>;
		qcom,nq-esepwr = <&tlmm 116 0x00>;
		interrupt-parent = <&tlmm>;
		interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "nfc_irq";
		pinctrl-names = "nfc_active", "nfc_suspend";
		pinctrl-0 = <&nfc_int_active
			     &nfc_enable_active
			     &nfc_clk_default>;
		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
	};
};

&qupv3_se10_i2c {
	status = "ok";
};

&qupv3_se6_4uart {
	status = "ok";
};

&usb1 {
	extcon = <&extcon_usb1>;
};

&ext_5v_boost {
	status = "ok";
};

&pm8998_vadc {
	vph_pwr@83 {
		label = "vph_pwr";
		reg = <ADC_VPH_PWR>;
		qcom,pre-scaling = <1 1>;
	};

	vcoin@85 {
		label = "vcoin";
		reg = <ADC_VCOIN>;
		qcom,pre-scaling = <1 1>;
	};

	xo_therm@4c {
		label = "xo_therm";
		reg = <ADC_XO_THERM_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	msm_therm@4d {
		label = "msm_therm";
		reg = <ADC_AMUX_THM1_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pa_therm1@4f {
		label = "pa_therm1";
		reg = <ADC_AMUX_THM3_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	quiet_therm@51 {
		label = "quiet_therm";
		reg = <ADC_AMUX_THM5_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};
};

&pm8998_adc_tm {
	io-channels = <&pm8998_vadc ADC_VPH_PWR>,
			<&pm8998_vadc ADC_XO_THERM_PU2>,
			<&pm8998_vadc ADC_AMUX_THM1_PU2>,
			<&pm8998_vadc ADC_AMUX_THM3_PU2>,
			<&pm8998_vadc ADC_AMUX_THM5_PU2>;

	/* Channel nodes */
	vph_pwr@83 {
		label = "vph_pwr";
		reg = <ADC_VPH_PWR>;
	};

	xo_therm@4c {
		label = "xo_therm";
		reg = <ADC_XO_THERM_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	msm_therm@4d {
		label = "msm_therm";
		reg = <ADC_AMUX_THM1_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pa_therm1@4f {
		label = "pa_therm1";
		reg = <ADC_AMUX_THM3_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	quiet_therm@51 {
		label = "quiet_therm";
		reg = <ADC_AMUX_THM5_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};
};

&thermal_zones {
	xo-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm8998_adc_tm 0x4c>;
		wake-capable-sensor;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <10000>;
				type = "passive";
			};

			thermal-hal-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	msm-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm8998_adc_tm 0x4d>;
		wake-capable-sensor;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};
	};

	pa-therm1-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm8998_adc_tm 0x4f>;
		wake-capable-sensor;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};
	};

	quiet-therm-adc {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm8998_adc_tm 0x51>;
		wake-capable-sensor;
		thermal-governor = "user_space";

		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};
	};
};

&wil6210 {
	status = "ok";
};