diff --git a/blackarch-install b/blackarch-install
index 7c706e6a..4267a30c 100644
--- a/blackarch-install
+++ b/blackarch-install
@@ -47,7 +47,7 @@ INSTALL_MODE=''
 
 # install modes
 INSTALL_REPO='1'
-INSTALL_LIVE_ISO='2'
+INSTALL_FULL_ISO='2'
 INSTALL_BLACKMAN='3'
 
 # chosen locale
@@ -174,7 +174,7 @@ WLAN_PASSPHRASE=''
 # check boot mode
 BOOT_MODE=''
 
-# check type of ISO (live? netinst?)
+# check type of ISO (Full? netinst?)
 ISO_TYPE=''
 
 
@@ -270,7 +270,7 @@ check_iso_type()
 {
   if [ "$(which dnsspider 2> /dev/null)" ]
   then
-    ISO_TYPE='live'
+    ISO_TYPE='full'
   else
     ISO_TYPE='net'
   fi
@@ -349,21 +349,21 @@ ask_install_mode()
   while
     [ "$INSTALL_MODE" != "$INSTALL_REPO" ] && \
     [ "$INSTALL_MODE" != "$INSTALL_BLACKMAN" ] && \
-    [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
+    [ "$INSTALL_MODE" != "$INSTALL_FULL_ISO" ]
   do
     title 'Welcome to the BlackArch Linux installer!'
     wprintf '[+] Available installation modes:'
     printf "\n
   1. Install from BlackArch repository (online)
-  2. Install from BlackArch Live-ISO (offline)
+  2. Install from BlackArch Full-ISO (offline)
   3. Install from sources using blackman (online)\n\n"
     wprintf '[?] Choose an installation mode: '
     read -r INSTALL_MODE
-    if [ "$INSTALL_MODE" = "$INSTALL_LIVE_ISO" ]
+    if [ "$INSTALL_MODE" = "$INSTALL_FULL_ISO" ]
     then
       if [ "$ISO_TYPE" = "net" ]
       then
-        err 'WTF, Live-ISO mode with Netinstall? Nope!'
+        err 'WTF, Full-ISO mode with Netinstall? Nope!'
         ask_install_mode
         INSTALL_MODE=''
       fi
@@ -1431,7 +1431,7 @@ setup_initramfs()
   cp -f "$BI_PATH/data/etc/mkinitcpio.conf" "$CHROOT/etc/mkinitcpio.conf"
   cp -fr "$BI_PATH/data/etc/mkinitcpio.d" "$CHROOT/etc/"
 
-  if [ "$INSTALL_MODE" = "$INSTALL_LIVE_ISO" ]
+  if [ "$INSTALL_MODE" = "$INSTALL_FULL_ISO" ]
   then
     cp /run/archiso/bootmnt/blackarch/boot/x86_64/vmlinuz-linux \
       "$CHROOT/boot/vmlinuz-linux"
@@ -1526,7 +1526,7 @@ EOF
 
     uuid="$(lsblk -o UUID "$ROOT_PART" | sed -n 2p)"
 
-    if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
+    if [ "$INSTALL_MODE" != "$INSTALL_FULL_ISO" ]
     then
       chroot $CHROOT pacman -S grub --noconfirm --overwrite='*' --needed \
         > $VERBOSE 2>&1
@@ -1725,13 +1725,13 @@ setup_extra_packages()
 # perform system base setup/configurations
 setup_base_system()
 {
-  if [ "$INSTALL_MODE" = "$INSTALL_LIVE_ISO" ]
+  if [ "$INSTALL_MODE" = "$INSTALL_FULL_ISO" ]
   then
-    dump_live_iso
+    dump_full_iso
     sleep_clear 1
   fi
 
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
+  if [ "$INSTALL_MODE" != "$INSTALL_FULL_ISO" ]
   then
     pass_mirror_conf # copy mirror list to chroot env
 
@@ -1775,7 +1775,7 @@ setup_base_system()
     sleep_clear 2
   fi
 
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
+  if [ "$INSTALL_MODE" != "$INSTALL_FULL_ISO" ]
   then
     reinitialize_keyring
     sleep_clear 1
@@ -2257,21 +2257,21 @@ update_user_groups()
 }
 
 
-# dump data from the live-iso
-dump_live_iso()
+# dump data from the full-iso
+dump_full_iso()
 {
-  live_dirs='/bin /sbin /etc /home /lib /lib64 /opt /root /srv /usr /var /tmp'
+  full_dirs='/bin /sbin /etc /home /lib /lib64 /opt /root /srv /usr /var /tmp'
   total_size=0 # no cheat
 
   title 'BlackArch Linux Setup'
 
-  wprintf '[+] Dumping data from Live-ISO. Grab a coffee and pop shells!'
+  wprintf '[+] Dumping data from Full-ISO. Grab a coffee and pop shells!'
   printf "\n\n"
 
   wprintf '[+] Fetching total size to transfer, please wait...'
   printf "\n"
 
-  for d in $live_dirs
+  for d in $full_dirs
   do
     part_size=$(du -sm "$d" 2> /dev/null | awk '{print $1}')
     ((total_size+=part_size))
@@ -2292,7 +2292,7 @@ dump_live_iso()
   wprintf "[+] Installation done!\n"
 
   # clean up files
-  wprintf '[+] Cleaning Live Environment files, please wait...'
+  wprintf '[+] Cleaning Full Environment files, please wait...'
   sed -i 's/Storage=volatile/#Storage=auto/' ${CHROOT}/etc/systemd/journald.conf
   rm -rf "$CHROOT/etc/udev/rules.d/81-dhcpcd.rules"
   rm -rf "$CHROOT/etc/systemd/system/"{choose-mirror.service,pacman-init.service,etc-pacman.d-gnupg.mount,getty@tty1.service.d}
@@ -2475,7 +2475,7 @@ main()
   ask_hostname
   sleep_clear 0
 
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
+  if [ "$INSTALL_MODE" != "$INSTALL_FULL_ISO" ]
   then
     get_net_ifs
     ask_net_conf_mode
@@ -2541,7 +2541,7 @@ main()
   sleep_clear 1
 
   # blackarch Linux
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
+  if [ "$INSTALL_MODE" != "$INSTALL_FULL_ISO" ]
   then
     setup_blackarch
     sleep_clear 1
diff --git a/docs/TODO b/docs/TODO
index 41b91ea2..1eeebfbb 100644
--- a/docs/TODO
+++ b/docs/TODO
@@ -19,6 +19,11 @@ ChangeLog and TODO list for blackarch-installer
   [ ] update: add help text for each section if feasible
 
 
+===> 1.2.20
+
+  [x] s/live/full/gi
+
+
 ===> 1.2.19
 
   [x] add default mkinitcpio.* stuff
diff --git a/docs/blackarch-install b/docs/blackarch-install
deleted file mode 100644
index a186c131..00000000
--- a/docs/blackarch-install
+++ /dev/null
@@ -1,2562 +0,0 @@
-#!/usr/bin/env bash
-################################################################################
-#                                                                              #
-# blackarch-installer - Official Installer for BlackArch Linux                 #
-#                                                                              #
-# AUTHOR                                                                       #
-# noptrix@nullsecurity.net                                                     #
-#                                                                              #
-################################################################################
-
-
-# blackarch-installer version
-VERSION='1.2.19'
-
-# path to blackarch-installer
-BI_PATH='/usr/share/blackarch-installer'
-
-# true / false
-TRUE=0
-FALSE=1
-
-# return codes
-SUCCESS=0
-FAILURE=1
-
-# verbose mode - default: quiet
-VERBOSE='/dev/null'
-
-# colors
-WHITE="$(tput setaf 7)"
-# WHITEB="$(tput bold ; tput setaf 7)"
-# BLUE="$(tput setaf 4)"
-BLUEB="$(tput bold ; tput setaf 4)"
-CYAN="$(tput setaf 6)"
-CYANB="$(tput bold ; tput setaf 6)"
-# GREEN="$(tput setaf 2)"
-# GREENB="$(tput bold ; tput setaf 2)"
-RED="$(tput setaf 1)"
-# REDB="$(tput bold; tput setaf 1)"
-YELLOW="$(tput setaf 3)"
-# YELLOWB="$(tput bold ; tput setaf 3)"
-BLINK="$(tput blink)"
-NC="$(tput sgr0)"
-
-# installation mode
-INSTALL_MODE=''
-
-# install modes
-INSTALL_REPO='1'
-INSTALL_LIVE_ISO='2'
-INSTALL_BLACKMAN='3'
-
-# chosen locale
-LOCALE=''
-
-# set locale
-SET_LOCALE='1'
-
-# list locales
-LIST_LOCALE='2'
-
-# chosen keymap
-KEYMAP=''
-
-# set keymap
-SET_KEYMAP='1'
-
-# list keymaps
-LIST_KEYMAP='2'
-
-# network interfaces
-NET_IFS=''
-
-# chosen network interface
-NET_IF=''
-
-# network configuration mode
-NET_CONF_MODE=''
-
-# network configuration modes
-NET_CONF_AUTO='1'
-NET_CONF_WLAN='2'
-NET_CONF_MANUAL='3'
-NET_CONF_SKIP='4'
-
-# hostname
-HOST_NAME=''
-
-# host ipv4 address
-HOST_IPV4=''
-
-# gateway ipv4 address
-GATEWAY=''
-
-# subnet mask
-SUBNETMASK=''
-
-# broadcast address
-BROADCAST=''
-
-# nameserver address
-NAMESERVER=''
-
-# DualBoot flag
-DUALBOOT=''
-
-# LUKS flag
-LUKS=''
-
-# avalable hard drive
-HD_DEVS=''
-
-# chosen hard drive device
-HD_DEV=''
-
-# Partitions
-PARTITIONS=''
-
-# partition label: gpt or dos
-PART_LABEL=''
-
-# boot partition
-BOOT_PART=''
-
-# root partition
-ROOT_PART=''
-
-# crypted root
-CRYPT_ROOT='r00t'
-
-# swap partition
-SWAP_PART=''
-
-# boot fs type - default: ext4
-BOOT_FS_TYPE=''
-
-# root fs type - default: ext4
-ROOT_FS_TYPE=''
-
-# chroot directory / blackarch linux installation
-CHROOT='/mnt'
-
-# normal system user
-NORMAL_USER=''
-
-# default BlackArch Linux repository URL
-BA_REPO_URL='https://www.mirrorservice.org/sites/blackarch.org/blackarch/$repo/os/$arch'
-#BA_REPO_URL='https://blackarch.unixpeople.org/$repo/os/$arch'
-#BA_REPO_URL='http://ftp.halifax.rwth-aachen.de/blackarch/$repo/os/$arch'
-
-# default ArchLinux repository URL
-AR_REPO_URL='https://archlinux.surlyjake.com/archlinux/$repo/os/$arch'
-AR_REPO_URL="$AR_REPO_URL http://mirrors.evowise.com/archlinux/\$repo/os/\$arch"
-AR_REPO_URL="$AR_REPO_URL http://mirror.rackspace.com/archlinux/\$repo/os/\$arch"
-
-# X (display + window managers ) setup - default: false
-X_SETUP=$FALSE
-
-# VirtualBox setup - default: false
-VBOX_SETUP=$FALSE
-
-# VMware setup - default: false
-VMWARE_SETUP=$FALSE
-
-# BlackArch Linux tools setup - default: false
-BA_TOOLS_SETUP=$FALSE
-
-# wlan ssid
-WLAN_SSID=''
-
-# wlan passphrase
-WLAN_PASSPHRASE=''
-
-# check boot mode
-BOOT_MODE=''
-
-# check type of ISO (live? netinst?)
-ISO_TYPE=''
-
-
-# Exit on CTRL + c
-ctrl_c() {
-  err "Keyboard Interrupt detected, leaving..."
-  exit $FAILURE
-}
-
-trap ctrl_c 2
-
-
-# check exit status
-check()
-{
-  es=$1
-  func="$2"
-  info="$3"
-
-  if [ "$es" -ne 0 ]
-  then
-    echo
-    warn "Something went wrong with $func. $info."
-    sleep 5
-  fi
-}
-
-
-# print formatted output
-wprintf()
-{
-  fmt="${1}"
-
-  shift
-  printf "%s$fmt%s" "$WHITE" "$@" "$NC"
-
-  return $SUCCESS
-}
-
-
-# print warning
-warn()
-{
-  printf "%s[!] WARNING: %s%s\n" "$YELLOW" "$@" "$NC"
-
-  return $SUCCESS
-}
-
-
-# print error and return failure
-err()
-{
-  printf "%s[-] ERROR: %s%s\n" "$RED" "$@" "$NC"
-
-  return $FAILURE
-}
-
-# leet banner (very important)
-banner()
-{
-  columns="$(tput cols)"
-  str="--==[ blackarch-installer v$VERSION ]==--"
-
-  printf "${BLUEB}%*s${NC}\n" "${COLUMNS:-$(tput cols)}" | tr ' ' '-'
-
-  echo "$str" |
-  while IFS= read -r line
-  do
-    printf "%s%*s\n%s" "$CYANB" $(( (${#line} + columns) / 2)) \
-      "$line" "$NC"
-  done
-
-  printf "${BLUEB}%*s${NC}\n\n\n" "${COLUMNS:-$(tput cols)}" | tr ' ' '-'
-
-  return $SUCCESS
-}
-
-
-# check boot mode
-check_boot_mode()
-{
-  if [ "$(efivar --list 2> /dev/null)" ]
-  then
-     BOOT_MODE="uefi"
-  fi
-
-  return $SUCCESS
-}
-
-
-# check type of iso
-check_iso_type()
-{
-  if [ "$(which dnsspider 2> /dev/null)" ]
-  then
-    ISO_TYPE='live'
-  else
-    ISO_TYPE='net'
-  fi
-
-  return $SUCCESS
-}
-
-
-# sleep and clear
-sleep_clear()
-{
-  sleep "$1"
-  clear
-
-  return $SUCCESS
-}
-
-
-# confirm user inputted yYnN
-confirm()
-{
-  header="$1"
-  ask="$2"
-
-  while true
-  do
-    title "$header"
-    wprintf "$ask"
-    read -r input
-    case $input in
-      y|Y|yes|YES|Yes) return $TRUE ;;
-      n|N|no|NO|No) return $FALSE ;;
-      *) clear ; continue ;;
-    esac
-  done
-
-  return $SUCCESS
-}
-
-
-# print menu title
-title()
-{
-  banner
-  printf "${CYAN}>> %s${NC}\n\n\n" "${@}"
-
-  return "${SUCCESS}"
-}
-
-
-# check for environment issues
-check_env()
-{
-  if [ -f '/var/lib/pacman/db.lck' ]
-  then
-    err 'pacman locked - Please remove /var/lib/pacman/db.lck'
-  fi
-}
-
-
-# check user id
-check_uid()
-{
-  if [ "$(id -u)" != '0' ]
-  then
-    err 'You must be root to run the BlackArch installer!'
-  fi
-
-  return $SUCCESS
-}
-
-
-# welcome and ask for installation mode
-ask_install_mode()
-{
-  while
-    [ "$INSTALL_MODE" != "$INSTALL_REPO" ] && \
-    [ "$INSTALL_MODE" != "$INSTALL_BLACKMAN" ] && \
-    [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
-  do
-    title 'Welcome to the BlackArch Linux installer!'
-    wprintf '[+] Available installation modes:'
-    printf "\n
-  1. Install from BlackArch repository (online)
-  2. Install from BlackArch Live-ISO (offline)
-  3. Install from sources using blackman (online)\n\n"
-    wprintf '[?] Choose an installation mode: '
-    read -r INSTALL_MODE
-    if [ "$INSTALL_MODE" = "$INSTALL_LIVE_ISO" ]
-    then
-      if [ "$ISO_TYPE" = "net" ]
-      then
-        err 'WTF, Live-ISO mode with Netinstall? Nope!'
-        ask_install_mode
-        INSTALL_MODE=''
-      fi
-    fi
-    clear
-  done
-
-  return $SUCCESS
-}
-
-
-# ask for output mode
-ask_output_mode()
-{
-  title 'Environment > Output Mode'
-  wprintf '[+] Available output modes:'
-  printf "\n
-  1. Quiet (default)
-  2. Verbose (output of system commands: mkfs, pacman, etc.)\n\n"
-  wprintf "[?] Make a choice: "
-  read -r output_opt
-  if [ "$output_opt" = 2 ]
-  then
-    VERBOSE='/dev/stdout'
-  fi
-
-  return $SUCCESS
-}
-
-
-# ask for locale to use
-ask_locale()
-{
-  while [ "$locale_opt" != "$SET_LOCALE" ] && \
-    [ "$locale_opt" != "$LIST_LOCALE" ]
-  do
-    title 'Environment > Locale Setup'
-    wprintf '[+] Available locale options:'
-    printf "\n
-  1. Set a locale
-  2. List available locales\n\n"
-    wprintf "[?] Make a choice: "
-    read -r locale_opt
-    if [ "$locale_opt" = "$SET_LOCALE" ]
-    then
-      break
-    elif [ "$locale_opt" = "$LIST_LOCALE" ]
-    then
-      less /etc/locale.gen
-      echo
-    else
-      clear
-      continue
-    fi
-    clear
-  done
-
-  clear
-
-  return $SUCCESS
-}
-
-
-# set locale to use
-set_locale()
-{
-  title 'Environment > Locale Setup'
-  wprintf '[?] Set locale [en_US.UTF-8]: '
-  read -r LOCALE
-
-  # default locale
-  if [ -z "$LOCALE" ]
-  then
-    echo
-    warn 'Setting default locale: en_US.UTF-8'
-    sleep 1
-    LOCALE='en_US.UTF-8'
-  fi
-  localectl set-locale "LANG=$LOCALE"
-  check $? 'setting locale'
-
-  return $SUCCESS
-}
-
-
-# ask for keymap to use
-ask_keymap()
-{
-  while [ "$keymap_opt" != "$SET_KEYMAP" ] && \
-    [ "$keymap_opt" != "$LIST_KEYMAP" ]
-  do
-    title 'Environment > Keymap Setup'
-    wprintf '[+] Available keymap options:'
-    printf "\n
-  1. Set a keymap
-  2. List available keymaps\n\n"
-    wprintf '[?] Make a choice: '
-    read -r keymap_opt
-
-    if [ "$keymap_opt" = "$SET_KEYMAP" ]
-    then
-      break
-    elif [ "$keymap_opt" = "$LIST_KEYMAP" ]
-    then
-      localectl list-keymaps
-      echo
-    else
-      clear
-      continue
-    fi
-    clear
-  done
-
-  clear
-
-  return $SUCCESS
-}
-
-
-# set keymap to use
-set_keymap()
-{
-  title 'Environment > Keymap Setup'
-  wprintf '[?] Set keymap [us]: '
-  read -r KEYMAP
-
-  # default keymap
-  if [ -z "$KEYMAP" ]
-  then
-    echo
-    warn 'Setting default keymap: us'
-    sleep 1
-    KEYMAP='us'
-  fi
-  localectl set-keymap --no-convert "$KEYMAP"
-  loadkeys "$KEYMAP" > $VERBOSE 2>&1
-  check $? 'setting keymap'
-
-  return $SUCCESS
-}
-
-
-# enable multilib in pacman.conf if x86_64 present
-enable_pacman_multilib()
-{
-  path="$1"
-
-  if [ "$path" = 'chroot' ]
-  then
-    path="$CHROOT"
-  else
-    path=""
-  fi
-
-  title 'Pacman Setup > Multilib'
-
-  if [ "$(uname -m)" = "x86_64" ]
-  then
-    wprintf '[+] Enabling multilib support'
-    printf "\n\n"
-    if grep -q "#\[multilib\]" "$path/etc/pacman.conf"
-    then
-      # it exists but commented
-      sed -i '/\[multilib\]/{ s/^#//; n; s/^#//; }' "$path/etc/pacman.conf"
-    elif ! grep -q "\[multilib\]" "$path/etc/pacman.conf"
-    then
-      # it does not exist at all
-      printf "[multilib]\nInclude = /etc/pacman.d/mirrorlist\n" \
-        >> "$path/etc/pacman.conf"
-    fi
-  fi
-
-  return $SUCCESS
-}
-
-
-# enable color mode in pacman.conf
-enable_pacman_color()
-{
-  path="$1"
-
-  if [ "$path" = 'chroot' ]
-  then
-    path="$CHROOT"
-  else
-    path=""
-  fi
-
-  title 'Pacman Setup > Color'
-
-  wprintf '[+] Enabling color mode'
-  printf "\n\n"
-
-  sed -i 's/^#Color/Color/' "$path/etc/pacman.conf"
-
-  return $SUCCESS
-}
-
-
-# enable misc options in pacman.conf
-enable_pacman_misc()
-{
-  path="$1"
-
-  if [ "$path" = 'chroot' ]
-  then
-    path="$CHROOT"
-  else
-    path=""
-  fi
-
-  title 'Pacman Setup > Misc Options'
-
-  wprintf '[+] Enabling DisableDownloadTimeout'
-  printf "\n\n"
-  sed -i '37a DisableDownloadTimeout' "$path/etc/pacman.conf"
-
-  # put here more misc options if necessary
-
-  return $SUCCESS
-}
-
-
-# update pacman package database
-update_pkg_database()
-{
-  title 'Pacman Setup > Package Database'
-
-  wprintf '[+] Updating pacman database'
-  printf "\n\n"
-
-  pacman -Syy --noconfirm > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# update pacman.conf and database
-update_pacman()
-{
-  enable_pacman_multilib
-  sleep_clear 1
-
-  enable_pacman_color
-  sleep_clear 1
-
-  enable_pacman_misc
-  sleep_clear 1
-
-  update_pkg_database
-  sleep_clear 1
-
-  return $SUCCESS
-}
-
-
-# ask user for hostname
-ask_hostname()
-{
-  while [ -z "$HOST_NAME" ]
-  do
-    title 'Network Setup > Hostname'
-    wprintf '[?] Set your hostname: '
-    read -r HOST_NAME
-  done
-
-  return $SUCCESS
-}
-
-# get available network interfaces
-get_net_ifs()
-{
-  NET_IFS="$(ip -o link show | awk -F': ' '{print $2}' |grep -v 'lo')"
-
-  return $SUCCESS
-}
-
-
-# ask user for network interface
-ask_net_if()
-{
-  while true
-  do
-    title 'Network Setup > Network Interface'
-    wprintf '[+] Available network interfaces:'
-    printf "\n\n"
-    for i in $NET_IFS
-    do
-      echo "    > $i"
-    done
-    echo
-    wprintf '[?] Please choose a network interface: '
-    read -r NET_IF
-    if echo "$NET_IFS" | grep "\<$NET_IF\>" > /dev/null
-    then
-      clear
-      break
-    fi
-    clear
-  done
-
-  return $SUCCESS
-}
-
-
-# ask for networking configuration mode
-ask_net_conf_mode()
-{
-  while [ "$NET_CONF_MODE" != "$NET_CONF_AUTO" ] && \
-    [ "$NET_CONF_MODE" != "$NET_CONF_WLAN" ] && \
-    [ "$NET_CONF_MODE" != "$NET_CONF_MANUAL" ] && \
-    [ "$NET_CONF_MODE" != "$NET_CONF_SKIP" ]
-  do
-    title 'Network Setup > Network Interface'
-    wprintf '[+] Network interface configuration:'
-    printf "\n
-  1. Auto DHCP (use this for auto connect via dhcp on selected interface)
-  2. WiFi WPA Setup (use if you need to connect to a wlan before)
-  3. Manual (use this if you are 1337)
-  4. Skip (use this if you are already connected)\n\n"
-    wprintf "[?] Please choose a mode: "
-    read -r NET_CONF_MODE
-    clear
-  done
-
-  return $SUCCESS
-}
-
-
-# ask for network addresses
-ask_net_addr()
-{
-  while [ "$HOST_IPV4" = "" ] || \
-    [ "$GATEWAY" = "" ] || [ "$SUBNETMASK" = "" ] || \
-    [ "$BROADCAST" = "" ] || [ "$NAMESERVER" = "" ]
-  do
-    title 'Network Setup > Network Configuration (manual)'
-    wprintf "[+] Configuring network interface $NET_IF via USER: "
-    printf "\n
-  > Host ipv4
-  > Gateway ipv4
-  > Subnetmask
-  > Broadcast
-  > Nameserver
-    \n"
-    wprintf '[?] Host IPv4: '
-    read -r HOST_IPV4
-    wprintf '[?] Gateway IPv4: '
-    read -r GATEWAY
-    wprintf '[?] Subnetmask: '
-    read -r SUBNETMASK
-    wprintf '[?] Broadcast: '
-    read -r BROADCAST
-    wprintf '[?] Nameserver: '
-    read -r NAMESERVER
-    clear
-  done
-
-  return $SUCCESS
-}
-
-
-# manual network interface configuration
-net_conf_manual()
-{
-  title 'Network Setup > Network Configuration (manual)'
-  wprintf "[+] Configuring network interface '$NET_IF' manually: "
-  printf "\n\n"
-
-  ip addr flush dev "$NET_IF"
-  ip link set "$NET_IF" up
-  ip addr add "$HOST_IPV4/$SUBNETMASK" broadcast "$BROADCAST" dev "$NET_IF"
-  ip route add default via "$GATEWAY"
-  echo "nameserver $NAMESERVER" > /etc/resolv.conf
-
-  return $SUCCESS
-}
-
-
-# auto (dhcp) network interface configuration
-net_conf_auto()
-{
-  opts='-h noleak -i noleak -v ,noleak -I noleak -t 10'
-
-  title 'Network Setup > Network Configuration (auto)'
-  wprintf "[+] Configuring network interface '$NET_IF' via DHCP: "
-  printf "\n\n"
-
-  dhcpcd "$opts" -i "$NET_IF" > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# ask for wlan data (ssid, wpa passphrase, etc.)
-ask_wlan_data()
-{
-  while [ "$WLAN_SSID" = "" ] || [ "$WLAN_PASSPHRASE" = "" ]
-  do
-    title 'Network Setup > Network Configuration (WiFi)'
-    wprintf "[+] Configuring network interface $NET_IF via W-LAN + DHCP: "
-    printf "\n
-  > W-LAN SSID
-  > WPA Passphrase (will not echo)
-    \n"
-    wprintf "[?] W-LAN SSID: "
-    read -r WLAN_SSID
-    wprintf "[?] WPA Passphrase: "
-    read -rs WLAN_PASSPHRASE
-    clear
-  done
-
-  return $SUCCESS
-}
-
-
-# wifi and auto dhcp network interface configuration
-net_conf_wlan()
-{
-  wpasup="$(mktemp)"
-  dhcp_opts='-h noleak -i noleak -v ,noleak -I noleak -t 10'
-
-  title 'Network Setup > Network Configuration (WiFi)'
-  wprintf "[+] Configuring network interface $NET_IF via W-LAN + DHCP: "
-  printf "\n\n"
-
-  wpa_passphrase "$WLAN_SSID" "$WLAN_PASSPHRASE" > "$wpasup"
-  wpa_supplicant -B -c "$wpasup" -i "$NET_IF" > $VERBOSE 2>&1
-
-  warn 'We need to wait a bit for wpa_supplicant and dhcpcd'
-
-  sleep 10
-
-  dhcpcd "$dhcp_opts" -i "$NET_IF" > $VERBOSE 2>&1
-
-  sleep 10
-
-  return $SUCCESS
-}
-
-
-# check for internet connection
-check_inet_conn()
-{
-  title 'Network Setup > Connection Check'
-  wprintf '[+] Checking for Internet connection...'
-
-  if ! curl -s http://www.yahoo.com/ > $VERBOSE
-  then
-    err 'No Internet connection! Check your network (settings).'
-    exit $FAILURE
-  fi
-
-}
-
-
-# ask user for dualboot install
-ask_dualboot()
-{
-  while [ "$DUALBOOT" = '' ]
-  do
-    if confirm 'Hard Drive Setup > DualBoot' '[?] Install BlackArch Linux with Windows/Other OS [y/n]: '
-    then
-      DUALBOOT=$TRUE
-    else
-      DUALBOOT=$FALSE
-    fi
-  done
-  return $SUCCESS
-}
-
-
-# ask user for luks encrypted partition
-ask_luks()
-{
-  while [ "$LUKS" = '' ]
-  do
-    if confirm 'Hard Drive Setup > Crypto' '[?] Full encrypted root [y/n]: '
-    then
-      LUKS=$TRUE
-    else
-      LUKS=$FALSE
-      echo
-      warn 'The root partition will NOT be encrypted'
-    fi
-    sleep_clear 2
-  done
-  return $SUCCESS
-}
-
-
-# get available hard disks
-get_hd_devs()
-{
-  HD_DEVS="$(lsblk | grep disk | awk '{print $1}')"
-
-  return $SUCCESS
-}
-
-
-# ask user for device to format and setup
-ask_hd_dev()
-{
-  while true
-  do
-    title 'Hard Drive Setup'
-
-    wprintf '[+] Available hard drives for installation:'
-    printf "\n\n"
-
-    for i in $HD_DEVS
-    do
-      echo "    > ${i}"
-    done
-    echo
-    wprintf '[?] Please choose a device: '
-    read -r HD_DEV
-    if echo "$HD_DEVS" | grep "\<$HD_DEV\>" > /dev/null
-    then
-      HD_DEV="/dev/$HD_DEV"
-      clear
-      break
-    fi
-    clear
-  done
-
-
-  return $SUCCESS
-}
-
-# get available partitions on hard drive
-get_partitions()
-{
-  PARTITIONS=$(fdisk -l "${HD_DEV}" -o device,size,type | \
-    grep "${HD_DEV}[[:alnum:]]" |awk '{print $1;}')
-
-  return $SUCCESS
-}
-
-
-# ask user to create partitions using cfdisk
-ask_cfdisk()
-{
-  if confirm 'Hard Drive Setup > Partitions' '[?] Create partitions with cfdisk (root and boot, optional swap) [y/n]: '
-  then
-    clear
-    zero_part
-  else
-    echo
-    warn 'No partitions chosed? Make sure you have them already configured.'
-    get_partitions
-  fi
-
-  return $SUCCESS
-}
-
-
-# zero out partition if needed/chosen
-zero_part()
-{
-  local zeroed_part=0;
-  if confirm 'Hard Drive Setup' '[?] Start with an in-memory zeroed partition table [y/n]: '
-  zeroed_part=1;
-  then
-    cfdisk -z "$HD_DEV"
-    sync
-  else
-    cfdisk "$HD_DEV"
-    sync
-  fi
-  get_partitions
-  if [ ${#PARTITIONS[@]} -eq 0 ] && [ $zeroed_part -eq 1 ] ; then
-    err 'You have not created partitions on your disk, make sure to write your changes before quiting cfdisk. Trying again...'
-    zero_part
-  fi
-  if [ "$BOOT_MODE" = 'uefi' ] && ! fdisk -l "$HD_DEV" -o type | grep -i 'EFI' ; then
-    err 'You are booting in UEFI mode but not EFI partition was created, make sure you select the "EFI System" type for your EFI partition.'
-    zero_part
-  fi
-  return $SUCCESS
-}
-
-
-# get partition label
-get_partition_label()
-{
-  PART_LABEL="$(fdisk -l "$HD_DEV" |grep "Disklabel" | awk '{print $3;}')"
-
-  return $SUCCESS
-}
-
-
-# get partitions
-ask_partitions()
-{
-  while [ "$BOOT_PART" = '' ] || \
-    [ "$ROOT_PART" = '' ] || \
-    [ "$BOOT_FS_TYPE" = '' ] || \
-    [ "$ROOT_FS_TYPE" = '' ]
-  do
-    title 'Hard Drive Setup > Partitions'
-    wprintf '[+] Created partitions:'
-    printf "\n\n"
-
-    fdisk -l "${HD_DEV}" -o device,size,type |grep "${HD_DEV}[[:alnum:]]"
-
-    echo
-
-    if [ "$BOOT_MODE" = 'uefi' ]  && [ "$PART_LABEL" = 'gpt' ]
-    then
-      while [ -z "$BOOT_PART" ]; do
-        wprintf "[?] EFI System partition (${HD_DEV}X): "
-        read -r BOOT_PART
-        until [[ "$PARTITIONS" =~ $BOOT_PART ]]; do
-          wprintf "[?] Your partition $BOOT_PART is not in the partitions list.\n"
-          wprintf "[?] EFI System partition (${HD_DEV}X): "
-          read -r BOOT_PART
-        done
-      done
-      BOOT_FS_TYPE="fat32"
-    else
-      while [ -z "$BOOT_PART" ]; do
-        wprintf "[?] Boot partition (${HD_DEV}X): "
-        read -r BOOT_PART
-        until [[ "$PARTITIONS" =~ $BOOT_PART ]]; do
-          wprintf "[?] Your partition $BOOT_PART is not in the partitions list.\n"
-          wprintf "[?] Boot partition (${HD_DEV}X): "
-          read -r BOOT_PART
-        done
-      done
-      wprintf '[?] Choose a filesystem to use in your boot partition (ext2, ext3, ext4)? (default: ext4): '
-      read -r BOOT_FS_TYPE
-      if [ -z "$BOOT_FS_TYPE" ]; then
-        BOOT_FS_TYPE="ext4"
-      fi
-    fi
-    while [ -z "$ROOT_PART" ]; do
-      wprintf "[?] Root partition (${HD_DEV}X): "
-      read -r ROOT_PART
-      until [[ "$PARTITIONS" =~ $ROOT_PART ]]; do
-          wprintf "[?] Your partition $ROOT_PART is not in the partitions list.\n"
-          wprintf "[?] Root partition (${HD_DEV}X): "
-          read -r ROOT_PART
-      done
-    done
-    wprintf '[?] Choose a filesystem to use in your root partition (ext2, ext3, ext4, btrfs)? (default: ext4): '
-    read -r ROOT_FS_TYPE
-    if [ -z "$ROOT_FS_TYPE" ]; then
-      ROOT_FS_TYPE="ext4"
-    fi
-    wprintf "[?] Swap partition (${HD_DEV}X - empty for none): "
-    read -r SWAP_PART
-    if [ -n "$SWAP_PART" ]; then
-        until [[ "$PARTITIONS" =~ $SWAP_PART ]]; do
-          wprintf "[?] Your partition $SWAP_PART is not in the partitions list.\n"
-          wprintf "[?] Swap partition (${HD_DEV}X): "
-          read -r SWAP_PART
-        done
-    fi
-
-    if [ "$SWAP_PART" = '' ]
-    then
-      SWAP_PART='none'
-    fi
-    clear
-  done
-
-  return $SUCCESS
-}
-
-
-# print partitions and ask for confirmation
-print_partitions()
-{
-  i=""
-
-  while true
-  do
-    title 'Hard Drive Setup > Partitions'
-    wprintf '[+] Current Partition table'
-    printf "\n
-  > /boot   : %s (%s)
-  > /       : %s (%s)
-  > swap    : %s (swap)
-  \n" "$BOOT_PART" "$BOOT_FS_TYPE" \
-      "$ROOT_PART" "$ROOT_FS_TYPE" \
-      "$SWAP_PART"
-    wprintf '[?] Partition table correct [y/n]: '
-    read -r i
-    if [ "$i" = 'y' ] || [ "$i" = 'Y' ]
-    then
-      clear
-      break
-    elif [ "$i" = 'n' ] || [ "$i" = 'N' ]
-    then
-      echo
-      err 'Hard Drive Setup aborted.'
-      exit $FAILURE
-    else
-      clear
-      continue
-    fi
-    clear
-  done
-
-  return $SUCCESS
-}
-
-
-# ask user and get confirmation for formatting
-ask_formatting()
-{
-  if confirm 'Hard Drive Setup > Partition Formatting' '[?] Formatting partitions. Are you sure? No crying afterwards? [y/n]: '
-  then
-    return $SUCCESS
-  else
-    echo
-    err 'Seriously? No formatting no fun! Please format to continue or CTRL + c to cancel...'
-    ask_formatting
-  fi
-
-}
-
-
-# create LUKS encrypted partition
-make_luks_partition()
-{
-  part="$1"
-
-  title 'Hard Drive Setup > Partition Creation (crypto)'
-
-  wprintf '[+] Creating LUKS partition'
-  printf "\n\n"
-
-  cryptsetup -q -y -v luksFormat "$part" \
-    > $VERBOSE 2>&1 || { err 'Could not LUKS format, trying again.'; make_luks_partition "$@"; }
-
-}
-
-
-# open LUKS partition
-open_luks_partition()
-{
-  part="$1"
-  name="$2"
-
-  title 'Hard Drive Setup > Partition Creation (crypto)'
-
-  wprintf '[+] Opening LUKS partition'
-  printf "\n\n"
-  cryptsetup open "$part" "$name" > $VERBOSE 2>&1 ||
-    { err 'Could not open LUKS device, please try again and make sure that your password is correct.'; open_luks_partition "$@"; }
-
-}
-
-
-# create swap partition
-make_swap_partition()
-{
-  title 'Hard Drive Setup > Partition Creation (swap)'
-
-  wprintf '[+] Creating SWAP partition'
-  printf "\n\n"
-  mkswap $SWAP_PART > $VERBOSE 2>&1 || { err 'Could not create filesystem'; exit $FAILURE; }
-
-}
-
-
-# make and format root partition
-make_root_partition()
-{
-  if [ $LUKS = $TRUE ]
-  then
-    make_luks_partition "$ROOT_PART"
-    sleep_clear 1
-    open_luks_partition "$ROOT_PART" "$CRYPT_ROOT"
-    sleep_clear 1
-    title 'Hard Drive Setup > Partition Creation (root crypto)'
-    wprintf '[+] Creating encrypted ROOT partition'
-    printf "\n\n"
-    if [ "$ROOT_FS_TYPE" = 'btrfs' ]
-    then
-      mkfs.$ROOT_FS_TYPE -f "/dev/mapper/$CRYPT_ROOT" > $VERBOSE 2>&1 ||
-        { err 'Could not create filesystem'; exit $FAILURE; }
-    else
-      mkfs.$ROOT_FS_TYPE -F "/dev/mapper/$CRYPT_ROOT" > $VERBOSE 2>&1 ||
-        { err 'Could not create filesystem'; exit $FAILURE; }
-    fi
-    sleep_clear 1
-  else
-    title 'Hard Drive Setup > Partition Creation (root)'
-    wprintf '[+] Creating ROOT partition'
-    printf "\n\n"
-    if [ "$ROOT_FS_TYPE" = 'btrfs' ]
-    then
-      mkfs.$ROOT_FS_TYPE -f "$ROOT_PART" > $VERBOSE 2>&1 ||
-        { err 'Could not create filesystem'; exit $FAILURE; }
-    else
-      mkfs.$ROOT_FS_TYPE -F "$ROOT_PART" > $VERBOSE 2>&1 ||
-        { err 'Could not create filesystem'; exit $FAILURE; }
-    fi
-    sleep_clear 1
-  fi
-
-  return $SUCCESS
-}
-
-
-# make and format boot partition
-make_boot_partition()
-{
-  if [ "$BOOT_MODE" = 'uefi' ] && [ "$PART_LABEL" = 'gpt' ] && [ $DUALBOOT = $TRUE ]
-  then
-    return $SUCCESS
-  fi
-
-  title 'Hard Drive Setup > Partition Creation (boot)'
-
-  wprintf '[+] Creating BOOT partition'
-  printf "\n\n"
-  if [ "$BOOT_MODE" = 'uefi' ] && [ "$PART_LABEL" = 'gpt' ]
-  then
-    mkfs.fat -F32 "$BOOT_PART" > $VERBOSE 2>&1 ||
-      { err 'Could not create filesystem'; exit $FAILURE; }
-  else
-    mkfs.$BOOT_FS_TYPE -F "$BOOT_PART" > $VERBOSE 2>&1 ||
-      { err 'Could not create filesystem'; exit $FAILURE; }
-  fi
-
-  return $SUCCESS
-}
-
-
-# make and format partitions
-make_partitions()
-{
-  make_boot_partition
-  sleep_clear 1
-
-  make_root_partition
-  sleep_clear 1
-
-  if [ "$SWAP_PART" != "none" ]
-  then
-    make_swap_partition
-    sleep_clear 1
-  fi
-
-  return $SUCCESS
-}
-
-
-# mount filesystems
-mount_filesystems()
-{
-  title 'Hard Drive Setup > Mount'
-
-  wprintf '[+] Mounting filesystems'
-  printf "\n\n"
-
-  # ROOT
-  if [ $LUKS = $TRUE ]; then
-    if ! mount "/dev/mapper/$CRYPT_ROOT" $CHROOT; then
-      err "Error mounting root filesystem, leaving."
-      exit $FAILURE
-    fi
-  else
-    if ! mount "$ROOT_PART" $CHROOT; then
-      err "Error mounting root filesystem, leaving."
-      exit $FAILURE
-    fi
-  fi
-
-  # BOOT
-  mkdir "$CHROOT/boot" > $VERBOSE 2>&1
-  if ! mount "$BOOT_PART" "$CHROOT/boot"; then
-    err "Error mounting boot partition, leaving."
-    exit $FAILURE
-  fi
-
-  # SWAP
-  if [ "$SWAP_PART" != "none" ]
-  then
-    swapon $SWAP_PART > $VERBOSE 2>&1
-  fi
-
-  return $SUCCESS
-}
-
-
-# unmount filesystems
-umount_filesystems()
-{
-  routine="$1"
-
-  if [ "$routine" = 'harddrive' ]
-  then
-    title 'Hard Drive Setup > Unmount'
-
-    wprintf '[+] Unmounting filesystems'
-    printf "\n\n"
-
-    umount -Rf /mnt > /dev/null 2>&1; \
-    umount -Rf "$HD_DEV"{1..128} > /dev/null 2>&1 # gpt max - 128
-  else
-    title 'Game Over'
-
-    wprintf '[+] Unmounting filesystems'
-    printf "\n\n"
-
-    umount -Rf $CHROOT > /dev/null 2>&1
-    cryptsetup luksClose "$CRYPT_ROOT" > /dev/null 2>&1
-    swapoff $SWAP_PART > /dev/null 2>&1
-  fi
-
-  return $SUCCESS
-}
-
-
-# check for necessary space
-check_space()
-{
-  if [ $LUKS -eq $TRUE ]
-  then
-    avail_space=$(df -m | grep "/dev/mapper/$CRYPT_ROOT" | awk '{print $4}')
-  else
-    avail_space=$(df -m | grep "$ROOT_PART" | awk '{print $4}')
-  fi
-
-  if [ "$avail_space" -le 40960 ]
-  then
-    warn 'BlackArch Linux requires at least 40 GB of free space to install!'
-  fi
-
-  return $SUCCESS
-}
-
-
-# install ArchLinux base and base-devel packages
-install_base_packages()
-{
-  title 'Base System Setup > ArchLinux Packages'
-
-  wprintf '[+] Installing ArchLinux base packages'
-  printf "\n\n"
-  warn 'This can take a while, please wait...'
-  printf "\n"
-
-  pacstrap $CHROOT base base-devel btrfs-progs linux linux-firmware \
-    terminus-font terminus-font-ttf > $VERBOSE 2>&1
-  chroot $CHROOT pacman -Syy --noconfirm --overwrite='*' > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# setup /etc/resolv.conf
-setup_resolvconf()
-{
-  title 'Base System Setup > Etc'
-
-  wprintf '[+] Setting up /etc/resolv.conf'
-  printf "\n\n"
-
-  mkdir -p "$CHROOT/etc/" > $VERBOSE 2>&1
-  cp -L /etc/resolv.conf "$CHROOT/etc/resolv.conf" > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# setup fstab
-setup_fstab()
-{
-  title 'Base System Setup > Etc'
-
-  wprintf '[+] Setting up /etc/fstab'
-  printf "\n\n"
-
-  if [ "$PART_LABEL" = "gpt" ]
-  then
-    genfstab -U $CHROOT >> "$CHROOT/etc/fstab"
-  else
-    genfstab -L $CHROOT >> "$CHROOT/etc/fstab"
-  fi
-
-  sed 's/relatime/noatime/g' -i "$CHROOT/etc/fstab"
-
-  return $SUCCESS
-}
-
-
-# setup locale and keymap
-setup_locale()
-{
-  title 'Base System Setup > Locale'
-
-  wprintf "[+] Setting up $LOCALE locale"
-  printf "\n\n"
-  sed -i "s/^#en_US.UTF-8/en_US.UTF-8/" "$CHROOT/etc/locale.gen"
-  sed -i "s/^#$LOCALE/$LOCALE/" "$CHROOT/etc/locale.gen"
-  chroot $CHROOT locale-gen > $VERBOSE 2>&1
-  echo "LANG=$LOCALE" > "$CHROOT/etc/locale.conf"
-  echo "KEYMAP=$KEYMAP" > "$CHROOT/etc/vconsole.conf"
-
-  return $SUCCESS
-}
-
-
-# setup timezone
-setup_time()
-{
-  if confirm 'Base System Setup > Timezone' '[?] Default: UTC. Choose other timezone [y/n]: '
-  then
-    for t in $(timedatectl list-timezones)
-    do
-      echo "    > $t"
-    done
-
-    wprintf "\n[?] What is your (Zone/SubZone): "
-    read -r timezone
-    chroot $CHROOT ln -sf "/usr/share/zoneinfo/$timezone" /etc/localtime \
-      > $VERBOSE 2>&1
-
-    if [ $? -eq 1 ]
-    then
-      warn 'Do you live on Mars? Setting default time zone...'
-      sleep 1
-      default_time
-    else
-      wprintf "\n[+] Time zone setup correctly\n"
-    fi
-  else
-    wprintf "\n[+] Setting up default time and timezone\n"
-    sleep 2
-    default_time
-  fi
-
-  printf "\n"
-
-  return $SUCCESS
-}
-
-
-# default time and timezone
-default_time()
-{
-  echo
-  warn 'Setting up default time and timezone: UTC'
-  printf "\n\n"
-  chroot $CHROOT ln -sf /usr/share/zoneinfo/UTC /etc/localtime > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# setup initramfs
-setup_initramfs()
-{
-  title 'Base System Setup > InitramFS'
-
-  wprintf '[+] Setting up InitramFS'
-  printf "\n\n"
-
-  if [ "$INSTALL_MODE" = "$INSTALL_LIVE_ISO" ]
-  then
-    cp /run/archiso/bootmnt/blackarch/boot/x86_64/vmlinuz-linux \
-      "$CHROOT/boot/vmlinuz-linux"
-  fi
-
-  # terminus font
-  sed -i 's/keyboard fsck/keyboard fsck consolefont/g' \
-    "$CHROOT/etc/mkinitcpio.conf"
-  echo 'FONT=ter-114n' >> "$CHROOT/etc/vconsole.conf"
-
-  if [ $LUKS = $TRUE ]
-  then
-    sed -i 's/block filesystems/block keymap encrypt filesystems/g' \
-      "$CHROOT/etc/mkinitcpio.conf"
-  fi
-
-  warn 'This can take a while, please wait...'
-  printf "\n"
-  chroot $CHROOT mkinitcpio -P > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# mount /proc, /sys and /dev
-setup_proc_sys_dev()
-{
-  title 'Base System Setup > Proc Sys Dev'
-
-  wprintf '[+] Setting up /proc, /sys and /dev'
-  printf "\n\n"
-
-  mkdir -p "${CHROOT}/"{proc,sys,dev} > $VERBOSE 2>&1
-
-  mount -t proc proc "$CHROOT/proc" > $VERBOSE 2>&1
-  mount --rbind /sys "$CHROOT/sys" > $VERBOSE 2>&1
-  mount --make-rslave "$CHROOT/sys" > $VERBOSE 2>&1
-  mount --rbind /dev "$CHROOT/dev" > $VERBOSE 2>&1
-  mount --make-rslave "$CHROOT/dev" > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# setup hostname
-setup_hostname()
-{
-  title 'Base System Setup > Hostname'
-
-  wprintf '[+] Setting up hostname'
-  printf "\n\n"
-
-  echo "$HOST_NAME" > "$CHROOT/etc/hostname"
-
-  return $SUCCESS
-}
-
-
-# setup boot loader for UEFI/GPT or BIOS/MBR
-setup_bootloader()
-{
-  title 'Base System Setup > Boot Loader'
-
-  if [ "$BOOT_MODE" = 'uefi' ] && [ "$PART_LABEL" = 'gpt' ]
-  then
-    wprintf '[+] Setting up EFI boot loader'
-    printf "\n\n"
-
-    chroot $CHROOT bootctl install > $VERBOSE 2>&1
-    uuid="$(blkid "$ROOT_PART" | cut -d ' ' -f 2 | cut -d '"' -f 2)"
-
-    if [ $LUKS = $TRUE ]
-    then
-      cat >> "$CHROOT/boot/loader/entries/arch.conf" << EOF
-title   BlackArch Linux
-linux   /vmlinuz-linux
-initrd    /initramfs-linux.img
-options   cryptdevice=UUID=$uuid:$CRYPT_ROOT root=/dev/mapper/$CRYPT_ROOT rw
-EOF
-
-    else
-      cat >> "$CHROOT/boot/loader/entries/arch.conf" << EOF
-title   BlackArch Linux
-linux   /vmlinuz-linux
-initrd    /initramfs-linux.img
-options   root=UUID=$uuid rw
-EOF
-    fi
-  else
-    wprintf '[+] Setting up GRUB boot loader'
-    printf "\n\n"
-
-    uuid="$(lsblk -o UUID "$ROOT_PART" | sed -n 2p)"
-
-    if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
-    then
-      chroot $CHROOT pacman -S grub --noconfirm --overwrite='*' --needed \
-        > $VERBOSE 2>&1
-    else
-      mkdir -p "$CHROOT/boot/grub"
-    fi
-
-    if [ $DUALBOOT = $TRUE ]
-    then
-      chroot $CHROOT pacman -S os-prober --noconfirm --overwrite='*' --needed \
-        > $VERBOSE 2>&1
-    fi
-
-    if [ $LUKS = $TRUE ]
-    then
-      sed -i "s|quiet|cryptdevice=UUID=$uuid:$CRYPT_ROOT root=/dev/mapper/$CRYPT_ROOT quiet|" \
-        "$CHROOT/etc/default/grub"
-    fi
-    sed -i 's/Arch/BlackArch/g' "$CHROOT/etc/default/grub"
-    echo "GRUB_BACKGROUND=\"/boot/grub/splash.png\"" >> \
-      "$CHROOT/etc/default/grub"
-
-    sed -i 's/#GRUB_COLOR_/GRUB_COLOR_/g' "$CHROOT/etc/default/grub"
-
-    chroot $CHROOT grub-install --target=i386-pc "$HD_DEV" > $VERBOSE 2>&1
-
-    cp -f "$BI_PATH/data/boot/grub/splash.png" "$CHROOT/boot/grub/splash.png"
-
-    chroot $CHROOT grub-mkconfig -o /boot/grub/grub.cfg > $VERBOSE 2>&1
-
-  fi
-
-  return $SUCCESS
-}
-
-
-# ask for normal user account to setup
-ask_user_account()
-{
-  if confirm 'Base System Setup > User' '[?] Setup a normal user account [y/n]: '
-  then
-    wprintf '[?] User name: '
-    read -r NORMAL_USER
-  fi
-
-  return $SUCCESS
-}
-
-
-# setup blackarch test user (not active + lxdm issue)
-setup_testuser()
-{
-  title 'Base System Setup > Test User'
-
-  wprintf '[+] Setting up test user blackarchtest account'
-  printf "\n\n"
-  warn 'Remove this user after you added a normal system user account'
-  printf "\n"
-
-  chroot $CHROOT groupadd blackarchtest > $VERBOSE 2>&1
-  chroot $CHROOT useradd -g blackarchtest -d /home/blackarchtest/ \
-    -s /sbin/nologin -m blackarchtest > $VERBOSE 2>&1
-}
-
-
-# setup user account, password and environment
-setup_user()
-{
-  user="$(echo "$1" | tr -dc '[:alnum:]_' | tr '[:upper:]' '[:lower:]' |
-    cut -c 1-32)"
-
-  title 'Base System Setup > User'
-
-  wprintf "[+] Setting up $user account"
-  printf "\n\n"
-
-  # normal user
-  if [ -n "$NORMAL_USER" ]
-  then
-    chroot $CHROOT groupadd "$user" > $VERBOSE 2>&1
-    chroot $CHROOT useradd -g "$user" -d "/home/$user" -s "/bin/bash" \
-      -G "$user,wheel,users,video,audio" -m "$user" > $VERBOSE 2>&1
-    chroot $CHROOT chown -R "$user":"$user" "/home/$user" > $VERBOSE 2>&1
-    wprintf "[+] Added user: $user"
-    printf "\n\n"
-  # environment
-  elif [ -z "$NORMAL_USER" ]
-  then
-    cp -r "$BI_PATH/data/root/." "$CHROOT/root/." > $VERBOSE 2>&1
-  else
-    cp -r "$BI_PATH/data/user/." "$CHROOT/home/$user/." > $VERBOSE 2>&1
-    chroot $CHROOT chown -R "$user":"$user" "/home/$user" > $VERBOSE 2>&1
-  fi
-
-  # password
-  res=1337
-  wprintf "[?] Set password for $user: "
-  printf "\n\n"
-  while [ $res -ne 0 ]
-  do
-    if [ "$user" = "root" ]
-    then
-      chroot $CHROOT passwd
-    else
-      chroot $CHROOT passwd "$user"
-    fi
-    res=$?
-  done
-
-  return $SUCCESS
-}
-
-reinitialize_keyring()
-{
-  title 'Base System Setup > Keyring Reinitialization'
-
-  wprintf '[+] Reinitializing keyrings'
-  printf "\n"
-  sleep 2
-
-  chroot $CHROOT pacman -S --overwrite='*' --noconfirm archlinux-keyring \
-    > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-# install extra (missing) packages
-setup_extra_packages()
-{
-  arch='arch-install-scripts pkgfile'
-
-  bluetooth='bluez bluez-hid2hci bluez-tools bluez-utils'
-
-  browser='chromium elinks firefox'
-
-  editor='hexedit nano vim'
-
-  filesystem='cifs-utils dmraid dosfstools exfat-utils f2fs-tools
-  gpart gptfdisk mtools nilfs-utils ntfs-3g partclone parted partimage'
-
-  fonts='ttf-dejavu ttf-indic-otf ttf-liberation xorg-fonts-misc'
-
-  hardware='amd-ucode intel-ucode'
-
-  kernel='linux-headers'
-
-  misc='acpi alsa-utils b43-fwcutter bash-completion bc cmake ctags expac
-  feh git gpm haveged hdparm htop inotify-tools ipython irssi
-  linux-atm lsof mercurial mesa mlocate moreutils mpv p7zip rsync
-  rtorrent screen scrot smartmontools strace tmux udisks2 unace unrar
-  unzip upower usb_modeswitch usbutils zip zsh'
-
-  network='atftp bind-tools bridge-utils curl darkhttpd dhclient dhcpcd dialog
-  dnscrypt-proxy dnsmasq dnsutils fwbuilder gnu-netcat ipw2100-fw ipw2200-fw iw
-  iwd lftp nfs-utils ntp openconnect openssh openvpn ppp pptpclient rfkill
-  rp-pppoe socat vpnc wget wireless_tools wpa_supplicant wvdial xl2tpd'
-
-  xorg='rxvt-unicode xf86-video-amdgpu xf86-video-ati
-  xf86-video-dummy xf86-video-fbdev xf86-video-intel xf86-video-nouveau
-  xf86-video-openchrome xf86-video-sisusb xf86-video-vesa xf86-video-vmware
-  xf86-video-voodoo xorg-server xorg-xbacklight xorg-xinit xterm'
-
-  all="$arch $bluetooth $browser $editor $filesystem $fonts $hardware $kernel"
-  all="$all $misc $network $xorg"
-
-  title 'Base System Setup > Extra Packages'
-
-  wprintf '[+] Installing extra packages'
-  printf "\n"
-
-  printf "
-  > ArchLinux   : $(echo "$arch" | wc -w) packages
-  > Browser     : $(echo "$browser" | wc -w) packages
-  > Bluetooth   : $(echo "$bluetooth" | wc -w) packages
-  > Editor      : $(echo "$editor" | wc -w) packages
-  > Filesystem  : $(echo "$filesystem" | wc -w) packages
-  > Fonts       : $(echo "$fonts" | wc -w) packages
-  > Hardware    : $(echo "$hardware" | wc -w) packages
-  > Kernel      : $(echo "$kernel" | wc -w) packages
-  > Misc        : $(echo "$misc" | wc -w) packages
-  > Network     : $(echo "$network" | wc -w) packages
-  > Xorg        : $(echo "$xorg" | wc -w) packages
-  \n"
-
-  warn 'This can take a while, please wait...'
-  printf "\n"
-  sleep 2
-
-  chroot $CHROOT pacman -S --needed --overwrite='*' --noconfirm $all \
-    > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# perform system base setup/configurations
-setup_base_system()
-{
-  if [ "$INSTALL_MODE" = "$INSTALL_LIVE_ISO" ]
-  then
-    dump_live_iso
-    sleep_clear 1
-  fi
-
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
-  then
-    pass_mirror_conf # copy mirror list to chroot env
-
-    setup_resolvconf
-    sleep_clear 1
-
-    install_base_packages
-    sleep_clear 1
-
-    setup_resolvconf
-    sleep_clear 1
-  fi
-
-  setup_fstab
-  sleep_clear 1
-
-  setup_proc_sys_dev
-  sleep_clear 1
-
-  setup_locale
-  sleep_clear 1
-
-  setup_initramfs
-  sleep_clear 1
-
-  setup_hostname
-  sleep_clear 1
-
-  setup_user "root"
-  sleep_clear 1
-
-  ask_user_account
-  sleep_clear 1
-
-  if [ -n "$NORMAL_USER" ]
-  then
-    setup_user "$NORMAL_USER"
-    sleep_clear 1
-  else
-    setup_testuser
-    sleep_clear 2
-  fi
-
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
-  then
-    reinitialize_keyring
-    sleep_clear 1
-    setup_extra_packages
-    sleep_clear 1
-  fi
-
-  setup_bootloader
-  sleep_clear 1
-
-  return $SUCCESS
-}
-
-
-# enable systemd-networkd services
-enable_iwd_networkd()
-{
-  title 'BlackArch Linux Setup > Network'
-
-  wprintf '[+] Enabling Iwd and Networkd'
-  printf "\n\n"
-
-  chroot $CHROOT systemctl enable iwd systemd-networkd > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# update /etc files and set up iptables
-update_etc()
-{
-  title 'BlackArch Linux Setup > Etc files'
-
-  wprintf '[+] Updating /etc files'
-  printf "\n\n"
-
-  # /etc/*
-  cp -r "$BI_PATH/data/etc/"{arch-release,issue,motd,\
-os-release,sysctl.d,systemd} "$CHROOT/etc/." > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# ask for blackarch linux mirror
-ask_mirror()
-{
-  title 'BlackArch Linux Setup > BlackArch Mirror'
-
-  local IFS='|'
-  count=1
-  mirror_url='https://raw.githubusercontent.com/BlackArch/blackarch/master/mirror/mirror.lst'
-  mirror_file='/tmp/mirror.lst'
-
-  wprintf '[+] Fetching mirror list'
-  printf "\n\n"
-  curl -s -o $mirror_file $mirror_url > $VERBOSE
-
-  while read -r country url mirror_name
-  do
-    wprintf " %s. %s - %s" "$count" "$country" "$mirror_name"
-    printf "\n"
-    wprintf "   * %s" "$url"
-    printf "\n"
-    count=$((count + 1))
-  done < "$mirror_file"
-
-  printf "\n"
-  wprintf '[?] Select a mirror number (enter for default): '
-  read -r a
-  printf "\n"
-
-  # bugfix: detected chars added sometimes - clear chars
-  _a=$(printf "%s" "$a" | sed 's/[a-z]//Ig' 2> /dev/null)
-
-  if [ -z "$_a" ]
-  then
-    wprintf "[+] Choosing default mirror: %s " $BA_REPO_URL
-  else
-    BA_REPO_URL=$(sed -n "${_a}p" $mirror_file | cut -d "|" -f 2)
-    wprintf "[+] Mirror from '%s' selected" \
-      "$(sed -n "${_a}p" $mirror_file | cut -d "|" -f 3)"
-    printf "\n\n"
-  fi
-
-  rm -f $mirror_file
-
-  return $SUCCESS
-}
-
-# ask for archlinux server
-ask_mirror_arch()
-{
-  local mirrold='cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.backup'
-
-  if confirm 'Pacman Setup > ArchLinux Mirrorlist' \
-    "[+] Worldwide mirror will be used\n\n[?] Look for the best server [y/n]: "
-  then
-    printf "\n"
-    warn 'This may take time depending on your connection'
-    printf "\n"
-    $mirrold
-    pacman -Sy --noconfirm > $VERBOSE 2>&1
-    pacman -S --needed --noconfirm reflector > $VERBOSE 2>&1
-    yes | pacman -Scc > $VERBOSE 2>&1
-    reflector --verbose --latest 10 --protocol https --sort rate \
-      --save /etc/pacman.d/mirrorlist > $VERBOSE 2>&1
-  else
-    printf "\n"
-    warn 'Using Worldwide mirror server'
-    $mirrold
-    echo -e "## Arch Linux repository Worldwide mirrorlist\n\n" \
-      > /etc/pacman.d/mirrorlist
-
-    for wore in $AR_REPO_URL
-    do
-      echo "Server = $wore" >> /etc/pacman.d/mirrorlist
-    done
-  fi
-
-}
-
-# pass correct config
-pass_mirror_conf()
-{
-  mkdir -p "$CHROOT/etc/pacman.d/" > $VERBOSE 2>&1
-  cp -f /etc/pacman.d/mirrorlist "$CHROOT/etc/pacman.d/mirrorlist" \
-    > $VERBOSE 2>&1
-}
-
-
-# run strap.sh
-run_strap_sh()
-{
-  strap_sh='/tmp/strap.sh'
-  orig_sha1="$(curl -s https://blackarch.org/checksums/strap | awk '{print $1}')"
-
-  title 'BlackArch Linux Setup > Strap'
-
-  wprintf '[+] Downloading and executing strap.sh'
-  printf "\n\n"
-  warn 'This can take a while, please wait...'
-  printf "\n"
-
-  curl -s -o $strap_sh 'https://www.blackarch.org/strap.sh' > $VERBOSE 2>&1
-  sha1="$(sha1sum $strap_sh | awk '{print $1}')"
-
-  if [ "$sha1" = "$orig_sha1" ]
-  then
-    mv $strap_sh "${CHROOT}${strap_sh}"
-    chmod a+x "${CHROOT}${strap_sh}"
-    chroot $CHROOT echo "$BA_REPO_URL" | sh ${CHROOT}${strap_sh} > $VERBOSE 2>&1
-  else
-    { err "Wrong SHA1 sum for strap.sh: $sha1 (orig: $orig_sha1). Aborting!"; exit $FAILURE; }
-  fi
-
-  # add blackarch linux mirror if we are in chroot
-  if ! grep -q 'blackarch' "$CHROOT/etc/pacman.conf"
-  then
-    printf '[blackarch]\nServer = %s\n' "$BA_REPO_URL" \
-      >> "$CHROOT/etc/pacman.conf"
-  else
-    sed -i "/\[blackarch\]/{ n;s?Server.*?Server = $BA_REPO_URL?; }" \
-      "$CHROOT/etc/pacman.conf"
-  fi
-
-  return $SUCCESS
-}
-
-
-# ask user for X (display + window manager) setup
-ask_x_setup()
-{
-  if confirm 'BlackArch Linux Setup > X11' '[?] Setup X11 + window managers [y/n]: '
-  then
-    X_SETUP=$TRUE
-    printf "\n"
-    printf "${BLINK}NOOB! NOOB! NOOB! NOOB! NOOB! NOOB! NOOB!${NC}\n\n"
-  fi
-
-  return $SUCCESS
-}
-
-
-# setup display manager
-setup_display_manager()
-{
-  title 'BlackArch Linux Setup > Display Manager'
-
-  wprintf '[+] Setting up LXDM'
-  printf "\n\n"
-
-  # install lxdm packages
-  chroot $CHROOT pacman -S lxdm --needed --overwrite='*' --noconfirm \
-    > $VERBOSE 2>&1
-
-  # config files
-  cp -r "$BI_PATH/data/etc/X11" "$CHROOT/etc/."
-  cp -r "$BI_PATH/data/etc/xprofile" "$CHROOT/etc/."
-  cp -r "$BI_PATH/data/etc/lxdm/." "$CHROOT/etc/lxdm/."
-  cp -r "$BI_PATH/data/usr/share/lxdm/." "$CHROOT/usr/share/lxdm/."
-  cp -r "$BI_PATH/data/usr/share/gtk-2.0/." "$CHROOT/usr/share/gtk-2.0/."
-  mkdir -p "$CHROOT/usr/share/xsessions"
-
-  # enable in systemd
-  chroot $CHROOT systemctl enable lxdm > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# setup window managers
-setup_window_managers()
-{
-  title 'BlackArch Linux Setup > Window Managers'
-
-  wprintf '[+] Setting up window managers'
-  printf "\n\n"
-
-  while true
-  do
-    printf "
-  1. Awesome
-  2. Fluxbox
-  3. I3-wm
-  4. Openbox
-  5. Spectrwm
-  6. All of the above
-  \n"
-    wprintf '[?] Choose an option [6]: '
-    read -r choice
-    echo
-    case $choice in
-      1)
-        chroot $CHROOT pacman -S awesome --needed --overwrite='*' --noconfirm \
-          > $VERBOSE 2>&1
-        cp -r "$BI_PATH/data/etc/xdg/awesome/." "$CHROOT/etc/xdg/awesome/."
-        cp -r "$BI_PATH/data/usr/share/awesome/." "$CHROOT/usr/share/awesome/."
-        # fix bullshit exit() issue
-        sed -i 's|local visible, action = cmd(item, self)|local visible, action = cmd(0, 0)|' \
-          "$CHROOT/usr/share/awesome/lib/awful/menu.lua"
-        cp -r "$BI_PATH/data/usr/share/xsessions/awesome.desktop" "$CHROOT/usr/share/xsessions"
-        break
-        ;;
-      2)
-        chroot $CHROOT pacman -S fluxbox --needed --overwrite='*' --noconfirm \
-          > $VERBOSE 2>&1
-        cp -r "$BI_PATH/data/usr/share/fluxbox/." "$CHROOT/usr/share/fluxbox/."
-        cp -r "$BI_PATH/data/usr/share/xsessions/fluxbox.desktop" "$CHROOT/usr/share/xsessions"
-        break
-        ;;
-      3)
-        chroot $CHROOT pacman -S i3 dmenu rofi --needed --overwrite='*' \
-          --noconfirm > $VERBOSE 2>&1
-        cp -r "$BI_PATH/data/root/"{.config,.i3status.conf} "$CHROOT/root/."
-        cp -r "$BI_PATH/data/usr/share/xsessions/i3.desktop" "$CHROOT/usr/share/xsessions"
-        break
-        ;;
-      4)
-        chroot $CHROOT pacman -S openbox --needed --overwrite='*' --noconfirm \
-          > $VERBOSE 2>&1
-        cp -r "$BI_PATH/data/etc/xdg/openbox/." "$CHROOT/etc/xdg/openbox/."
-        cp -r "$BI_PATH/data/usr/share/themes/blackarch" \
-          "$CHROOT/usr/share/themes/i3lock/."
-        cp -r "$BI_PATH/data/usr/share/xsessions/openbox.desktop" "$CHROOT/usr/share/xsessions"
-        break
-        ;;
-      5)
-        chroot $CHROOT pacman -S spectrwm --needed --overwrite='*' --noconfirm \
-          > $VERBOSE 2>&1
-        cp -r "$BI_PATH/data/etc/spectrwm.conf" "$CHROOT/etc/spectrwm.conf"
-        cp -r "$BI_PATH/data/usr/share/xsessions/spectrwm.desktop" "$CHROOT/usr/share/xsessions"
-        break
-        ;;
-      *)
-        chroot $CHROOT pacman -S fluxbox openbox awesome i3 spectrwm --needed \
-          --overwrite='*' --noconfirm > $VERBOSE 2>&1
-
-        # awesome
-        cp -r "$BI_PATH/data/etc/xdg/awesome/." "$CHROOT/etc/xdg/awesome/."
-        cp -r "$BI_PATH/data/usr/share/awesome/." "$CHROOT/usr/share/awesome/."
-        sed -i 's|local visible, action = cmd(item, self)|local visible, action = cmd(0, 0)|' \
-          "$CHROOT/usr/share/awesome/lib/awful/menu.lua"
-
-        # fluxbox
-        cp -r "$BI_PATH/data/usr/share/fluxbox/." "$CHROOT/usr/share/fluxbox/."
-
-        # i3
-        cp -r "$BI_PATH/data/root/"{.config,.i3status.conf} "$CHROOT/root/."
-
-        # openbox
-        cp -r "$BI_PATH/data/etc/xdg/openbox/." "$CHROOT/etc/xdg/openbox/."
-        cp -r "$BI_PATH/data/usr/share/themes/blackarch" \
-          "$CHROOT/usr/share/themes/."
-
-        # spectrwm
-        cp -r "$BI_PATH/data/etc/spectrwm.conf" "$CHROOT/etc/spectrwm.conf"
-
-        # xsessions
-        cp -r "$BI_PATH/data/usr/share/xsessions" "$CHROOT/usr/share/xsessions"
-
-        break
-        ;;
-    esac
-  done
-
-  # wallpaper
-  cp -r "$BI_PATH/data/usr/share/blackarch" "$CHROOT/usr/share/blackarch"
-
-  # remove wrong xsession entries
-  chroot $CHROOT rm /usr/share/xsessions/openbox-kde.desktop > $VERBOSE 2>&1
-  chroot $CHROOT rm /usr/share/xsessions/i3-with-shmlog.desktop > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# ask user for VirtualBox modules+utils setup
-ask_vbox_setup()
-{
-  if confirm 'BlackArch Linux Setup > VirtualBox' '[?] Setup VirtualBox modules [y/n]: '
-  then
-    VBOX_SETUP=$TRUE
-  fi
-
-  return $SUCCESS
-}
-
-
-# setup virtualbox utils
-setup_vbox_utils()
-{
-  title 'BlackArch Linux Setup > VirtualBox'
-
-  wprintf '[+] Setting up VirtualBox utils'
-  printf "\n\n"
-
-  chroot $CHROOT pacman -S virtualbox-guest-utils --overwrite='*' --needed \
-    --noconfirm > $VERBOSE 2>&1
-
-  chroot $CHROOT systemctl enable vboxservice > $VERBOSE 2>&1
-
-  #printf "vboxguest\nvboxsf\nvboxvideo\n" \
-  #  > "$CHROOT/etc/modules-load.d/vbox.conf"
-
-  cp -r "$BI_PATH/data/etc/xdg/autostart/vboxclient.desktop" \
-    "$CHROOT/etc/xdg/autostart/." > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# ask user for VirtualBox modules+utils setup
-ask_vmware_setup()
-{
-  if confirm 'BlackArch Linux Setup > VMware' '[?] Setup VMware modules [y/n]: '
-  then
-    VMWARE_SETUP=$TRUE
-  fi
-
-  return $SUCCESS
-}
-
-
-# setup vmware utils
-setup_vmware_utils()
-{
-  title 'BlackArch Linux Setup > VMware'
-
-  wprintf '[+] Setting up VMware utils'
-  printf "\n\n"
-
-  chroot $CHROOT pacman -S open-vm-tools xf86-video-vmware \
-    xf86-input-vmmouse --overwrite='*' --needed --noconfirm \
-    > $VERBOSE 2>&1
-
-  chroot $CHROOT systemctl enable vmware-vmblock-fuse.service > $VERBOSE 2>&1
-  chroot $CHROOT systemctl enable vmtoolsd.service > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# ask user for BlackArch tools setup
-ask_ba_tools_setup()
-{
-  if confirm 'BlackArch Linux Setup > Tools' '[?] Setup BlackArch Linux tools [y/n]: '
-  then
-    BA_TOOLS_SETUP=$TRUE
-  fi
-
-  return $SUCCESS
-}
-
-
-# setup blackarch tools from repository (binary) or via blackman (source)
-setup_blackarch_tools()
-{
-  foo=5
-
-  if [ "$VERBOSE" = '/dev/null' ]
-  then
-    noconfirm='--noconfirm'
-  fi
-
-  title 'BlackArch Linux Setup > Tools'
-
-  wprintf '[+] Installing BlackArch Linux packages (grab a coffee)'
-  printf "\n\n"
-
-  if [ "$INSTALL_MODE" = $INSTALL_REPO ]
-  then
-    wprintf "[+] All available BlackArch tools groups:\n\n"
-    printf "    > blackarch blackarch-anti-forensic blackarch-automation
-    > blackarch-backdoor blackarch-binary blackarch-bluetooth blackarch-code-audit
-    > blackarch-cracker blackarch-crypto blackarch-database blackarch-debugger
-    > blackarch-decompiler blackarch-defensive blackarch-disassembler
-    > blackarch-dos blackarch-drone blackarch-exploitation blackarch-fingerprint
-    > blackarch-firmware blackarch-forensic blackarch-fuzzer blackarch-hardware
-    > blackarch-honeypot blackarch-ids blackarch-keylogger blackarch-malware
-    > blackarch-misc blackarch-mobile blackarch-networking blackarch-nfc
-    > blackarch-packer blackarch-proxy blackarch-recon blackarch-reversing
-    > blackarch-scanner blackarch-sniffer blackarch-social blackarch-spoof
-    > blackarch-threat-model blackarch-tunnel blackarch-unpacker blackarch-voip
-    > blackarch-webapp blackarch-windows blackarch-wireless \n\n"
-    wprintf "[?] BlackArch groups to install (space for multiple) [blackarch]: "
-    read -r BA_GROUPS
-    printf "\n"
-    warn 'This can take a while, please wait...'
-    if [ -z "$BA_GROUPS" ]
-    then
-      printf "\n"
-      check_space
-      printf "\n\n"
-      chroot $CHROOT pacman -S --needed --noconfirm --overwrite='*' blackarch \
-        > $VERBOSE 2>&1
-    else
-      chroot $CHROOT pacman -S --needed --noconfirm --overwrite='*' "$BA_GROUPS" \
-        > $VERBOSE 2>&1
-    fi
-  else
-    warn 'Installing all tools from source via blackman can take hours'
-    printf "\n"
-    wprintf '[+] <Control-c> to abort ... '
-    while [ $foo -gt 0 ]
-    do
-      wprintf "$foo "
-      sleep 1
-      foo=$((foo - 1))
-    done
-    printf "\n"
-    chroot $CHROOT pacman -S --needed --overwrite='*' $noconfirm blackman \
-      > $VERBOSE 2>&1
-    chroot $CHROOT blackman -a > $VERBOSE 2>&1
-  fi
-
-  return $SUCCESS
-}
-
-
-# add user to newly created groups
-update_user_groups()
-{
-  title 'BlackArch Linux Setup > User'
-
-  wprintf "[+] Adding user $user to groups and sudoers"
-  printf "\n\n"
-
-  # TODO: more to add here
-  if [ $VBOX_SETUP -eq $TRUE ]
-  then
-    chroot $CHROOT usermod -aG 'vboxsf,audio,video' "$user" > $VERBOSE 2>&1
-  fi
-
-  # sudoers
-  echo "$user ALL=(ALL) ALL" >> $CHROOT/etc/sudoers > $VERBOSE 2>&1
-
-  return $SUCCESS
-}
-
-
-# dump data from the live-iso
-dump_live_iso()
-{
-  live_dirs='/bin /sbin /etc /home /lib /lib64 /opt /root /srv /usr /var /tmp'
-  total_size=0 # no cheat
-
-  title 'BlackArch Linux Setup'
-
-  wprintf '[+] Dumping data from Live-ISO. Grab a coffee and pop shells!'
-  printf "\n\n"
-
-  wprintf '[+] Fetching total size to transfer, please wait...'
-  printf "\n"
-
-  for d in $live_dirs
-  do
-    part_size=$(du -sm "$d" 2> /dev/null | awk '{print $1}')
-    ((total_size+=part_size))
-    printf "
-  > $d $part_size MB"
-  done
-  printf "\n
-  [ Total size = $total_size MB ]
-  \n\n"
-
-  check_space
-
-  wprintf '[+] Installing the backdoors to /'
-  printf "\n\n"
-  warn 'This can take a while, please wait...'
-  printf "\n"
-  rsync -aWx --human-readable --info=progress2 / $CHROOT > $VERBOSE 2>&1
-  wprintf "[+] Installation done!\n"
-
-  # clean up files
-  wprintf '[+] Cleaning Live Environment files, please wait...'
-  sed -i 's/Storage=volatile/#Storage=auto/' ${CHROOT}/etc/systemd/journald.conf
-  rm -rf "$CHROOT/etc/udev/rules.d/81-dhcpcd.rules"
-  rm -rf "$CHROOT/etc/systemd/system/"{choose-mirror.service,pacman-init.service,etc-pacman.d-gnupg.mount,getty@tty1.service.d}
-  rm -rf "$CHROOT/etc/systemd/scripts/choose-mirror"
-  rm -rf "$CHROOT/etc/systemd/system/getty@tty1.service.d/autologin.conf"
-  rm -rf "$CHROOT/root/"{.automated_script.sh,.zlogin}
-  rm -rf "$CHROOT/etc/mkinitcpio-archiso.conf"
-  rm -rf "$CHROOT/etc/initcpio"
-  #rm -rf ${CHROOT}/etc/{group*,passwd*,shadow*,gshadow*}
-  wprintf "done\n"
-
-  return $SUCCESS
-}
-
-
-# setup blackarch related stuff
-setup_blackarch()
-{
-  update_etc
-  sleep_clear 1
-
-  enable_iwd_networkd
-  sleep_clear 1
-
-  ask_mirror
-  sleep_clear 1
-
-  run_strap_sh
-  sleep_clear 1
-
-  ask_x_setup
-  sleep_clear 3
-
-  if [ $X_SETUP -eq $TRUE ]
-  then
-    setup_display_manager
-    sleep_clear 1
-    setup_window_managers
-    sleep_clear 1
-  fi
-
-  ask_vbox_setup
-  sleep_clear 1
-
-  if [ $VBOX_SETUP -eq $TRUE ]
-  then
-    setup_vbox_utils
-    sleep_clear 1
-  fi
-
-  ask_vmware_setup
-  sleep_clear 1
-
-  if [ $VMWARE_SETUP -eq $TRUE ]
-  then
-    setup_vmware_utils
-    sleep_clear 1
-  fi
-
-  sleep_clear 1
-
-  enable_pacman_multilib 'chroot'
-  sleep_clear 1
-
-  enable_pacman_color 'chroot'
-  sleep_clear 1
-
-  ask_ba_tools_setup
-  sleep_clear 1
-
-  if [ $BA_TOOLS_SETUP -eq $TRUE ]
-  then
-    setup_blackarch_tools
-    sleep_clear 1
-  fi
-
-  if [ -n "$NORMAL_USER" ]
-  then
-    update_user_groups
-    sleep_clear 1
-  fi
-
-  return $SUCCESS
-}
-
-
-# for fun and lulz
-easter_backdoor()
-{
-  bar=0
-
-  title 'Game Over'
-
-  wprintf '[+] BlackArch Linux installation successfull!'
-  printf "\n\n"
-
-  wprintf 'Yo n00b, b4ckd00r1ng y0ur sy5t3m n0w '
-  while [ $bar -ne 5 ]
-  do
-    wprintf "."
-    sleep 1
-    bar=$((bar + 1))
-  done
-  printf " >> ${BLINK}${WHITE}HACK THE PLANET! D00R THE PLANET!${NC} <<"
-  printf "\n\n"
-
-  return $SUCCESS
-}
-
-
-# perform sync
-sync_disk()
-{
-  title 'Game Over'
-
-  wprintf '[+] Syncing disk'
-  printf "\n\n"
-
-  sync
-
-  return $SUCCESS
-}
-
-
-# check if new version available. perform self-update and exit
-self_updater()
-{
-  title 'Self Updater'
-  wprintf '[+] Checking for a new version of myself...'
-  printf "\n\n"
-
-  pacman -Syy > $VERBOSE 2>&1
-  repo="$(pacman -Ss blackarch-installer | head -1 | cut -d ' ' -f 2 |
-    cut -d '-' -f 1 | tr -d '.')0"
-  this="$(echo $VERSION | tr -d '.')0"
-
-  if [ "$this" -lt "$repo" ]
-  then
-    printf "\n\n"
-    warn 'A new version is available! Going to fuck, err, update myself.'
-    pacman -S --overwrite='*' --noconfirm blackarch-installer > $VERBOSE 2>&1
-    yes | pacman -Scc > $VERBOSE 2>&1
-    wprintf "\n[+] Updated successfully. Please restart the installer now!\n"
-    chmod +x /usr/share/blackarch-installer/blackarch-install
-    exit $SUCCESS
-  fi
-
-  return $SUCCESS
-}
-
-
-# controller and program flow
-main()
-{
-  # do some ENV checks
-  sleep_clear 0
-  check_uid
-  check_env
-  check_boot_mode
-  check_iso_type
-
-  # install mode
-  ask_install_mode
-
-  # output mode
-  ask_output_mode
-  sleep_clear 0
-
-  # locale
-  ask_locale
-  set_locale
-  sleep_clear 0
-
-  # keymap
-  ask_keymap
-  set_keymap
-  sleep_clear 0
-
-  # network
-  ask_hostname
-  sleep_clear 0
-
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
-  then
-    get_net_ifs
-    ask_net_conf_mode
-    if [ "$NET_CONF_MODE" != "$NET_CONF_SKIP" ]
-    then
-      ask_net_if
-    fi
-    case "$NET_CONF_MODE" in
-      "$NET_CONF_AUTO")
-        net_conf_auto
-        ;;
-      "$NET_CONF_WLAN")
-        ask_wlan_data
-        net_conf_wlan
-        ;;
-      "$NET_CONF_MANUAL")
-        ask_net_addr
-        net_conf_manual
-        ;;
-      "$NET_CONF_SKIP")
-        ;;
-      *)
-        ;;
-    esac
-    sleep_clear 1
-    check_inet_conn
-    sleep_clear 1
-
-    # self updater
-    self_updater
-    sleep_clear 1
-
-    # pacman
-    ask_mirror_arch
-    sleep_clear 1
-    update_pacman
-  fi
-
-  # hard drive
-  get_hd_devs
-  ask_hd_dev
-  ask_dualboot
-  sleep_clear 1
-  umount_filesystems 'harddrive'
-  sleep_clear 1
-  ask_cfdisk
-  sleep_clear 3
-  ask_luks
-  get_partition_label
-  ask_partitions
-  print_partitions
-  ask_formatting
-  clear
-  make_partitions
-  clear
-  mount_filesystems
-  sleep_clear 1
-
-  # arch linux
-  setup_base_system
-  sleep_clear 1
-  setup_time
-  sleep_clear 1
-
-  # blackarch Linux
-  if [ "$INSTALL_MODE" != "$INSTALL_LIVE_ISO" ]
-  then
-    setup_blackarch
-    sleep_clear 1
-  fi
-
-  # epilog
-  umount_filesystems
-  sleep_clear 1
-  sync_disk
-  sleep_clear 1
-  easter_backdoor
-
-  return $SUCCESS
-}
-
-
-# we start here
-main "$@"
-
-
-# EOF