Assembly of the X axis
This is the second part of the assembly process. You need to have built the Y axis first.
-
Mount the smooth rods in the X carriage --
-
Mount the linear bearings into the X carriage --
-
Fix the linear bearings in place with screws --
-
Prepare the X axis threaded rod --
-
Mount the X axis threaded rod --
-
Mount the X carriage in place --
-
Tighten the screws of the smooth rod holders --
-
Mount a spring in the end of the threaded rod --
-
Prepare the motor for the X axis --
-
Mount the X axis motor --
-
Mount the X gear cover --
Original instructions by bq.
License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/4.0/)
This hardware/software is provided "as is", and you use the hardware/software at your own risk. Under no circumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages.