diff --git a/Dockerfile b/Dockerfile
index 232693b..afb3286 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -7,6 +7,7 @@ ENV S6_SERVICES_GRACETIME=30000 \
     HOME="/root" \
     TERM="xterm" \
     PATH=${PATH}:/command \
+    DEBUG=false \
     TZ="Asia/Shanghai" \
     PUID=0 \
     PGID=0
@@ -57,11 +58,18 @@ RUN set -ex && \
     sed -i "s#;opcache.revalidate_freq=2#opcache.revalidate_freq=60#g" /etc/php/7.4/fpm/php.ini /etc/php/7.4/cli/php.ini && \
     sed -i "s#;opcache.validate_timestamps=1#opcache.validate_timestamps=0#g" /etc/php/7.4/fpm/php.ini /etc/php/7.4/cli/php.ini && \
     sed -i "s#;opcache.lockfile_path=/tmp#opcache.lockfile_path=/tmp#g" /etc/php/7.4/fpm/php.ini /etc/php/7.4/cli/php.ini && \
+    # Set php pid
     mkdir /run/php && \
+    # Set user
     usermod www-data --home /app/web && \
+    # Set logs
+    sed -i "s#;error_log = php_errors.log#error_log = /logs/php_errors.log#g" /etc/php/7.4/fpm/php.ini /etc/php/7.4/cli/php.ini && \
     mkdir /logs && \
-    #ln -sf /var/log/nginx/access.log /logs/nginx_access.log && \
-    ln -sf /var/log/nginx/error.log /logs/nginx_error.log && \
+    touch /logs/nginx_access.log && \
+    touch /logs/nginx_error.log && \
+    touch /logs/php7.4-fpm.log && \
+    touch /logs/php_errors.log && \
+    # Clear
     apt-get autoremove -y && \
     apt-get clean && \
     rm -rf \
diff --git a/rootfs/etc/cont-init.d/020-fixuser b/rootfs/etc/cont-init.d/020-fixuser
index 0cba3b1..e8d4fae 100644
--- a/rootfs/etc/cont-init.d/020-fixuser
+++ b/rootfs/etc/cont-init.d/020-fixuser
@@ -6,7 +6,7 @@ function 020_fixuser {
     groupmod -o -g "${PGID}" www-data
     usermod -o -u "${PUID}" www-data
 
-    chown www-data:www-data -R /app/web
+    chown www-data:www-data -R /app/web /logs
     chmod 755 -R /app/web
 
 }
diff --git a/rootfs/etc/nginx/nginx.conf b/rootfs/etc/nginx/nginx.conf
index c40bf00..b21478f 100644
--- a/rootfs/etc/nginx/nginx.conf
+++ b/rootfs/etc/nginx/nginx.conf
@@ -36,8 +36,8 @@ http {
         # Logging Settings
         ##
 
-        access_log /var/log/nginx/access.log;
-        error_log /var/log/nginx/error.log;
+        access_log /logs/nginx_access.log;
+        error_log /logs/nginx_error.log;
 
         ##
         # Gzip Settings
diff --git a/rootfs/etc/php/7.4/fpm/php-fpm.conf b/rootfs/etc/php/7.4/fpm/php-fpm.conf
new file mode 100644
index 0000000..a6f6b70
--- /dev/null
+++ b/rootfs/etc/php/7.4/fpm/php-fpm.conf
@@ -0,0 +1,145 @@
+;;;;;;;;;;;;;;;;;;;;;
+; FPM Configuration ;
+;;;;;;;;;;;;;;;;;;;;;
+
+; All relative paths in this configuration file are relative to PHP's install
+; prefix (/usr). This prefix can be dynamically changed by using the
+; '-p' argument from the command line.
+
+;;;;;;;;;;;;;;;;;;
+; Global Options ;
+;;;;;;;;;;;;;;;;;;
+
+[global]
+; Pid file
+; Note: the default prefix is /var
+; Default Value: none
+; Warning: if you change the value here, you need to modify systemd
+; service PIDFile= setting to match the value here.
+pid = /run/php/php7.4-fpm.pid
+
+; Error log file
+; If it's set to "syslog", log is sent to syslogd instead of being written
+; into a local file.
+; Note: the default prefix is /var
+; Default Value: log/php-fpm.log
+error_log = /logs/php7.4-fpm.log
+
+; syslog_facility is used to specify what type of program is logging the
+; message. This lets syslogd specify that messages from different facilities
+; will be handled differently.
+; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
+; Default Value: daemon
+;syslog.facility = daemon
+
+; syslog_ident is prepended to every message. If you have multiple FPM
+; instances running on the same server, you can change the default value
+; which must suit common needs.
+; Default Value: php-fpm
+;syslog.ident = php-fpm
+
+; Log level
+; Possible Values: alert, error, warning, notice, debug
+; Default Value: notice
+;log_level = notice
+
+; Log limit on number of characters in the single line (log entry). If the
+; line is over the limit, it is wrapped on multiple lines. The limit is for
+; all logged characters including message prefix and suffix if present. However
+; the new line character does not count into it as it is present only when
+; logging to a file descriptor. It means the new line character is not present
+; when logging to syslog.
+; Default Value: 1024
+;log_limit = 4096
+
+; Log buffering specifies if the log line is buffered which means that the
+; line is written in a single write operation. If the value is false, then the
+; data is written directly into the file descriptor. It is an experimental
+; option that can potentionaly improve logging performance and memory usage
+; for some heavy logging scenarios. This option is ignored if logging to syslog
+; as it has to be always buffered.
+; Default value: yes
+;log_buffering = no
+
+; If this number of child processes exit with SIGSEGV or SIGBUS within the time
+; interval set by emergency_restart_interval then FPM will restart. A value
+; of '0' means 'Off'.
+; Default Value: 0
+;emergency_restart_threshold = 0
+
+; Interval of time used by emergency_restart_interval to determine when
+; a graceful restart will be initiated.  This can be useful to work around
+; accidental corruptions in an accelerator's shared memory.
+; Available Units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;emergency_restart_interval = 0
+
+; Time limit for child processes to wait for a reaction on signals from master.
+; Available units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;process_control_timeout = 0
+
+; The maximum number of processes FPM will fork. This has been designed to control
+; the global number of processes when using dynamic PM within a lot of pools.
+; Use it with caution.
+; Note: A value of 0 indicates no limit
+; Default Value: 0
+; process.max = 128
+
+; Specify the nice(2) priority to apply to the master process (only if set)
+; The value can vary from -19 (highest priority) to 20 (lowest priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool process will inherit the master process priority
+;         unless specified otherwise
+; Default Value: no set
+; process.priority = -19
+
+; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
+; Default Value: yes
+;daemonize = yes
+
+; Set open file descriptor rlimit for the master process.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit for the master process.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Specify the event mechanism FPM will use. The following is available:
+; - select     (any POSIX os)
+; - poll       (any POSIX os)
+; - epoll      (linux >= 2.5.44)
+; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
+; - /dev/poll  (Solaris >= 7)
+; - port       (Solaris >= 10)
+; Default Value: not set (auto detection)
+;events.mechanism = epoll
+
+; When FPM is built with systemd integration, specify the interval,
+; in seconds, between health report notification to systemd.
+; Set to 0 to disable.
+; Available Units: s(econds), m(inutes), h(ours)
+; Default Unit: seconds
+; Default value: 10
+;systemd_interval = 10
+
+;;;;;;;;;;;;;;;;;;;;
+; Pool Definitions ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Multiple pools of child processes may be started with different listening
+; ports and different management options.  The name of the pool will be
+; used in logs and stats. There is no limitation on the number of pools which
+; FPM can handle. Your system will tell you anyway :)
+
+; Include one or more files. If glob(3) exists, it is used to include a bunch of
+; files from a glob(3) pattern. This directive can be used everywhere in the
+; file.
+; Relative path can also be used. They will be prefixed by:
+;  - the global prefix if it's been set (-p argument)
+;  - /usr otherwise
+include=/etc/php/7.4/fpm/pool.d/*.conf
\ No newline at end of file
diff --git a/rootfs/etc/php/7.4/fpm/pool.d/www.conf b/rootfs/etc/php/7.4/fpm/pool.d/www.conf
index 24cd0cb..3b4aa26 100644
--- a/rootfs/etc/php/7.4/fpm/pool.d/www.conf
+++ b/rootfs/etc/php/7.4/fpm/pool.d/www.conf
@@ -378,7 +378,7 @@ pm.max_spare_servers = 3
 ; Note: on highloaded environement, this can cause some delay in the page
 ; process time (several ms).
 ; Default Value: no
-;catch_workers_output = yes
+catch_workers_output = yes
 
 ; Decorate worker output with prefix and suffix containing information about
 ; the child that writes to the log and if stdout or stderr is used as well as
diff --git a/rootfs/etc/services.d/log/run b/rootfs/etc/services.d/log/run
deleted file mode 100644
index f7cff47..0000000
--- a/rootfs/etc/services.d/log/run
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/usr/bin/with-contenv bash
-# shellcheck shell=bash
-
-sleep 4
-
-exec s6-setuidgid root \
-    tail -f /logs/*.log
\ No newline at end of file
diff --git a/rootfs/etc/services.d/logs_out/run b/rootfs/etc/services.d/logs_out/run
new file mode 100644
index 0000000..85080b3
--- /dev/null
+++ b/rootfs/etc/services.d/logs_out/run
@@ -0,0 +1,11 @@
+#!/usr/bin/with-contenv bash
+# shellcheck shell=bash
+
+if [[ "${DEBUG}" == true ]]; then
+    LOG_OUT_COMMAND="tail -f /logs/*.log"
+else
+    LOG_OUT_COMMAND="tail -f /dev/null"
+fi
+
+exec s6-setuidgid root \
+    ${LOG_OUT_COMMAND}
\ No newline at end of file