7530AX: push_firmware & mount/Busybox Problem #483
Replies: 107 comments 73 replies
-
MAPSTART=0x00000000 LibNcFTP 3.2.5 (January 17, 2011) compiled for linux-x86_64-glibc2.27
MAPSTART=0x00000000 LibNcFTP 3.2.5 (January 17, 2011) compiled for linux-x86_64-glibc2.27
MAPSTART=0x00000000 LibNcFTP 3.2.5 (January 17, 2011) compiled for linux-x86_64-glibc2.27
MAPSTART=0x00000000 LibNcFTP 3.2.5 (January 17, 2011) compiled for linux-x86_64-glibc2.27
MAPSTART=0x20000000 LibNcFTP 3.2.5 (January 17, 2011) compiled for linux-x86_64-glibc2.27 |
Beta Was this translation helpful? Give feedback.
-
Könnte mir wer das von hier |
Beta Was this translation helpful? Give feedback.
-
Sollte jetzt ohne Parameter flashbar sein. Wenn du welche angibst müssen es die richtigen sein |
Beta Was this translation helpful? Give feedback.
-
Mit ncftp geht es nicht
./push_firmware 7530AX_07.29.all_freetz-ng-18944MO-ee0d4487f.image -cmd ftp
Nach dem Hochfahren bootet sie einfach neu.
Nach dem Hochfahren bootet sie einfach neu. |
Beta Was this translation helpful? Give feedback.
-
Du hast die aktuelle Version des Scriptes von heute verwendet? |
Beta Was this translation helpful? Give feedback.
-
Ja habe vorher git pull gemacht und ein neues Image gebaut |
Beta Was this translation helpful? Give feedback.
-
Die FTP-Befehle von dir sehen gut aus, wie auf https://boxmatrix.info/wiki/FIT-Image#History , flashen sollte funktionieren solange das Image überhaupt startet |
Beta Was this translation helpful? Give feedback.
-
Also er flash ja. Fährt dann weiter hoch, und macht dann ein Reboot. Und wie gesagt, kein freetz darauf. |
Beta Was this translation helpful? Give feedback.
-
Hm, da kann man so nichts dazu sagen. Es könnte
Am besten sieht man das mit einer seriellen Console. |
Beta Was this translation helpful? Give feedback.
-
Werde morgen mal den 6000 mit FRITZ.Repeater_6000-07.29-recover.exe und dann noch mal versuchen ihn zu freetzen |
Beta Was this translation helpful? Give feedback.
-
Hier mal das was ncftp sagt
Und hier das mit ftp
Grade noch mal neu aus gecheckt Image gebaut und es nochmal versucht. Das gleiche Spiel flash zuende box fährt weiter hoch und rebootet dann. EDIT |
Beta Was this translation helpful? Give feedback.
-
Du hast scheinbar gar keine FTP Verbindung zum Bootloader |
Beta Was this translation helpful? Give feedback.
-
./push_firmware 6000_07.29.all_freetz-ng-18931MO-945e2861e.image -cmd ncftp -ram 1024 -map 0x40000000
flash geht ^ ./push_firmware 6000_07.29.all_freetz-ng-18931MO-945e2861e.image -cmd ncftp
flash geht nicht ^ grade schnell gehacht FRITZ.Repeater_6000-07.29-recover.exe |
Beta Was this translation helpful? Give feedback.
-
Mal was ganz anderes, versucht du ein 6000 Image auf eine 7530ax zu flashen? |
Beta Was this translation helpful? Give feedback.
-
So der 6000 ist wieder freetz aber mit ./push_firmware 6000_07.29.all_freetz-ng-18931MO-945e2861e.image -cmd ncftp -ram 1024 -map 0x40000000 ohne -ram 1024 -map 0x40000000 flasht er erst nicht AB hier nun 7530AX ncftp
ftp
|
Beta Was this translation helpful? Give feedback.
-
Soll ich wieder was testen wegen, den Patches |
Beta Was this translation helpful? Give feedback.
-
So ich habe die 7530AX noch mal neu gepusht mit FW 7.22. bootslotctl get_fw_version 1 Wie man sehen kann sind nun 2 Verschidene Version drauf time sh fitdump.sh /dev/mtdblock1
Command exited with non-zero status 1 rm -r fit-dump/ time sh fit-findfs.sh /dev/mtdblock1 time sh fit-findfs.sh /dev/mtdblock4 So nun habe ich noch mal ein Update über die AVM seite gemacht bootslotctl get_fw_version 0 wget https://github.com/PeterPawn/YourFritz/raw/fit-tools/fit_tools/fitdump.sh time sh fitdump.sh /dev/mtdblock4
real 0m 5.73s time bootmanager debug verbose
real 0m 4.57s So nun habe ich die Box noch mal mit -mf gepusht |
Beta Was this translation helpful? Give feedback.
-
Auch hier noch einmal ... es gibt NICHTS Neues, was man testen müßte. Bei den ganzen Aktionen mit dem Flashen habe ich jetzt immer noch nicht verstanden (anhand dessen, was oben steht), woher die Images nun stammen. Wenn Du mittels Schon die Anzeige Es wäre sogar denkbar, daß die Box auch mit einem falsch aufgebauten FIT-Image noch booten kann, solange die "Gesamtgröße" stimmt (also ausreichend Daten in den Hauptspeicher kopiert werden), der Kernel gefunden und entpackt werden kann (was vermutlich auch kein Problem ist, denn der steht i.d.R. VOR dem Filesystem in der Image-Datei und für den ändert sich nichts, wenn man das Dateisystem dahinter austauscht) und dann noch die Daten für Wenn Du das Image überprüfen willst (also die Datei Wenn Du da also immer wieder dasselbe Image verwenden solltest (ich lese nichts Gegenteiliges), dann bringt auch dieser Test nicht wirklich etwas. Ich bleibe jedenfalls dabei, daß mein Code zum Zerlegen eines FIT-Images korrekt arbeitet - als "Beweis" dient mir die Tatsache, daß ich ohne weiteres aus der erzeugten Aber solange diese "Umwandlungen" funktionieren und dabei das erwartete Ergebnis zustande kommt, IST (zumindest für mich) der genutzte Code korrekt - wenn das dann bei einem anderen Image NICHT funktioniert (und ich habe ja irgendwo GENAU aufgeschlüsselt, wo das bei dem Image, was Du mir mal als Die Zeilen Die weiteren Tests mit
Und NEIN, auch das ist nichts zum "Nachmachen" ... das ist nur ein Beispiel, wo ich auf der 6490 (als LE-Maschine) den Teil des Codes, der SquashFS-Images mounten soll, speziell für FIT-Images und mit einer Kopie der Bei allem Verständnis für "Ungeduld" ... bitte erst mal nichts mehr testen (bzw. die Ergebnisse nicht mehr zeigen), bis ich wieder darum bitte. Solche Ausgaben wie |
Beta Was this translation helpful? Give feedback.
-
@freetz-ng-mod:
OK, gefunden ... dieses "f*cking"
Ich krieg' die Krise ... EDIT: Erledigt: PeterPawn/YourFritz@82f55ed |
Beta Was this translation helpful? Give feedback.
-
Nur zur Information, mit der FW 7.31 und BB 1.34 auch noch Reboot schleife. |
Beta Was this translation helpful? Give feedback.
-
Wenn ich mit dem Boot-Manager fertig bin, schaue ich (per SSH) auch da noch einmal drauf. Wegen der Unklarheiten beim FR6000 habe ich mir ohnehin mal ein Build-System für diese ARM-Plattformen aufgesetzt, mit dem ich dann mal einen Zumal das bei diesen Boxen tatsächlich "komplexer" ist, wenn es zu einer Kernel-Panic kommt. Da wird das Protokoll offenbar nicht mehr direkt geschrieben, wie das bei anderen Modellen von einer speziellen Routine im TFFS-Driver erledigt wird - bei der 7530ax wird so ein
zumindest offenbar bei einigen "Fehlerarten". Aber das ist noch Zukunftsmusik ... zumal ich mittlerweile aufgegeben habe zu verstehen, was da bisher genau getestet wurde und mit welchen Ergebnisse. Das machen wir dann (gemeinsam, weil das nur aus der Ferne nicht geht) ggf. noch mal von vorne - aber das MUSS ja auch nicht schlecht sein, wenn man ein Problem dann tatsächlich sauber reproduzieren kann. Denn ursprünglich gab es ja (wenn ich mich richtig erinnere) ein Problem mit dem WLAN - und dann war irgendwo plötzlich wieder etwas vom |
Beta Was this translation helpful? Give feedback.
-
Irgendwie hatte ich auch in Erinnerung dass die aktuelle Busybox version funktioniert, wenn man untrustedd lahmlegt... |
Beta Was this translation helpful? Give feedback.
-
@fda77 Das war bei der 5530, hier geht es nicht. Nur mit BB 1.27 lauft es |
Beta Was this translation helpful? Give feedback.
-
In der Inhaus Version wird der Kernel 4.19.183 benutzt. In der normalen Version ist 4.1.52. Vielleicht geht damit dann später auch BB 1.34. |
Beta Was this translation helpful? Give feedback.
-
Hier hatte noch jemand ein issue aufgemacht: https://github.com/Freetz-NG/freetz-ng/issues/536 |
Beta Was this translation helpful? Give feedback.
-
Ich habe da alles getestet, was mir eingefallen ist. Das einzige, das hilft, ist BB 1.27 |
Beta Was this translation helpful? Give feedback.
-
Schau mal ins issue |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Hattest du https://github.com/Freetz-NG/freetz-ng/issues/536 angeschaut? Dort steht was zu "wl*" (wlan?) devices in den logs |
Beta Was this translation helpful? Give feedback.
-
Durchgelesen ja. Aber noch nicht dazu gekommen es zu teste. werde es heute oder morgen mal testen. |
Beta Was this translation helpful? Give feedback.
-
Hi, Leute ich habe nun ca 5H versucht eine 7530AX zu freetzen. Was mir aber absolut nicht gelingt. Ich habe alles versucht.
-cmd ncftp -mf -ram 512 -lfs 1
-cmd ncftp -mf -ram 512 -lfs 0
-cmd ncftp -mf -ram 512
-cmd ncftp -mf
-cmd ncftp -ram 512 -lfs 1
-map 0x20000000
Und so weiter.
Hat hier noch jemand eine Idee. Ach ja ich habe die Box bestimmt schon 10 Mal mit FRITZ.Box_7530_AX-07.29-recover.exe recoverd. die Orginal FW über die AVM Seite auch schon geuppt. Eingerichtet ist sie auch schon.
Oder liegt es daran,
fitimg-0.7.1
Denn noch ist fitimg-0.7.0 in freetz drin
Beta Was this translation helpful? Give feedback.
All reactions