-
Hi, mit aktuellen master Stand (14.04 a0a7c1a) und FritzOS 7.50 scheint eine 6660 keine Kabel Internet Verbindung mehr zu bekommen. Hat schon jemand 7.50 Freetz auf einer Kabel Version laufen? |
Beta Was this translation helpful? Give feedback.
Replies: 20 comments 14 replies
-
Ich hab nun nochmal frisch gebaut mit nahezu default configs, also ohne dnsmasq und die multid patches und auch alle removal und normalen patche entfernt. Gleiches verhalten; Gui sagt Kabel verbunden, Ip aber nicht, Bandbreite 0 aber Kanäle verbunden, Power Lampe blinkt. Da ich in Original 7.50 nicht auf die Box komme, und hab ich zumindest boot dmesg zwischen 7.29 freetz-ng und 7.50 freetz-ng vergleichen. bis auf das 7.50 deutlich gesprächiger zu sein scheint (ich sehe die kernel meldungen gar nicht mehr) gibt es keine Fehler / Warnungen in 7.50 die nicht aich scho so ähnlich in 7.29 waren. Wenn ich nur wüsste wonach ich suchen muss.... |
Beta Was this translation helpful? Give feedback.
-
Du glaubst gar nicht wie es wäre mit dieser Fehlerbeschreibung, ohne cable Fritzbox und ohne Kabelanschluss diesen Fehler zu suchen! |
Beta Was this translation helpful? Give feedback.
-
Du kannst auch den aktuellen Git-Stand nehmen und ein altes FOS auswählen |
Beta Was this translation helpful? Give feedback.
-
Ja, das geht:
das sieht scheinbar so aus als würde Kabel noch trainieren, sag ja da hängt irgendwas. der Status bleibt wie gesagt dauerhaft so. |
Beta Was this translation helpful? Give feedback.
-
Ich vermute die Layer 2 Verbindung (MAC) steht schon, nur bekommst du keine IP (Layer 3): "DHCPV6 IN PROGRESS" |
Beta Was this translation helpful? Give feedback.
-
Ich weiss halt nicht wie "showdsldstat" bei docsis aussehen sollte wenn die Verbindung steht.
Wie ist das denn mit System > Partition wechseln? Geht das nicht? Es hat jedenfalls bislang noch niemand hinbekommen was genau nicht geht, falls es nicht geht: https://github.com/Freetz-NG/freetz-ng/blob/master/make/pkgs/mod/files/root/usr/mww/cgi-bin/exec.d/linux_fs_start.sh#L16 |
Beta Was this translation helpful? Give feedback.
-
Das hier zeigt showdslstat wenn verbunden, das syncspeed landet so ja auch inm OnlineMonitor der GUI
|
Beta Was this translation helpful? Give feedback.
-
Ich bin nun erstmal mit 7.29 auf ng23030 und werde ausgiebig testen und das als running base verwenden. die options.cfg hat jetz das FWLayout, also sollte das gehen (noch untested)
Beim fimware/var/install (von ng22100) tauchte
auf, der Update lief aber weiter. Unter ng23030 ist leider
|
Beta Was this translation helpful? Give feedback.
-
Wenn ich so ein Gerät hätte würde ich mal in das Script reinschauen. Zumindest um zu wissen ob es von Freetz oder AVM ausgelöst wird!
Das bleibt auch so lange wie es niemand ändert :)
Ich hab keine Ahung um was es da geht und noch nie was davon gelesen.
Ich hab schon an verschiedenen Stellen über "Segafaults" bei den Puma7 Geräten gelesen.
Das ist doch mal was...
|
Beta Was this translation helpful? Give feedback.
-
auch das geht leider nicht
Ich hab nun ein strace gebaut. Werd aber nicht richtig schlau draus. Im ENV ist ja Ich kann dir das strace schicken. Ist ziemlich gross, weil da wohl alle pids in /proc durchiteriert werden, zB:
hab ich so auch noch nicht gesehen, würd ich dann kürzen. Dafür geht "Firmwarepartion wechseln" nun! Das da vorher die Reservepartion nicht richtig gezeigt wird, hatte ich schon mal im cgi analysiert: AVM hat im kernel /proc/mtd auf nur noch die aktive Bank beschränkt, da tauchen nur 5 Partitionen und nicht mehr > 15 oder so auf (wie noch bei ner 6490) daher kann system_lfs.cgi die nicht mehr finden und es kommt "unknown" das chrony Problem ist relativ einfach: das binary ist da, und auch die config und zu Fuss kann ich die auch starten, das wird nur ab ca ng22100 nicht mehr über den multid automatisch gestartet, warum auch immer. |
Beta Was this translation helpful? Give feedback.
-
Von Freetz gebaute bins (ldd) wissen wo sie ihre libs finden (RPATH), LD_LIBRARY_PATH ist nur zum testen auf der box, da kannst du was reinkopieren. Im lesen von strace bin ich auch nicht so gut.. Aber häng doch einfach mal die letzten 1000 zeilen an. Am besten strace mit "-f" aufrufen um die forks auch zu sehen.
Nicht richtig = gar nichts? Irgend wie müsste man das doch wieder mounten können. Es gibt ja auch die mtd und mtdblock und partition usw. Das müsste sich jemand der so ein Gerät anschauen und dann sagen wie man da ran kommt. Such mal in /proc/ und /sys/ herum das chrony Problem: libmultid wurde vor ein paar wochen wieder aktiviert, davor was es nur für fos vor 7.2. In 7.5 musste es aber wieder rein. Das ändert was am multid startverhalten (dns wird nicht mehr durch avm blockiert). |
Beta Was this translation helpful? Give feedback.
-
Ich hoffe, dass das alles irgendwie zusammenhängt. Also der Onlinestatus irgendwie auch auf libraries zurückzuführen ist.
|
Beta Was this translation helpful? Give feedback.
-
das Internet problem ist im IPP bekannt, mir hat gerade der thread ersteller geschrieben, der dsld statrter nicht, den kann ich zu fuss starten und dann startet auch der chronyd ( vml via multid, der mitbekommt das online true ist) nach nem reboot bleibt der dsld aber der chronyd ist wieder weg |
Beta Was this translation helpful? Give feedback.
-
Ja ich bin wieder auf 7.50 (a0a7c1a) und nun halt dich fest:
|
Beta Was this translation helpful? Give feedback.
-
Ich check gerade die libs von cli. das ist der Übergang, wo die alte Version ausstieg.
Nicht richtig aussagekräftig. Was ich nicht verstehe: libdl-2.28.so zB ist im build zwischen original und modified unverändert, libslibc.so.0.9.3 zb ist fast 50% kleiner |
Beta Was this translation helpful? Give feedback.
-
Mmm, dnsmasq bräuchte ich schon. ich werd erstmal den IPP thread zuende lesen, ich bekomm hier ohnehin schon Ärger weil das Netz immer kurz weg ist :) |
Beta Was this translation helpful? Give feedback.
-
Das shm ist irgend ein Speicher zwischen Prozessen und _sem könnte ne Semaphore für Locking sein ... und im trace weiter oben war ein "timeout" der nun weg ist. Jedenfalls muss man am libmultid + startverhalten hrumprobieen, bzw durch deaktivieren zuerst mal schauen ob es dadurch kommt. Und eigentlich sollte man libctlmgr auch wieder fos 7.5 machen (ist deaktiviert) um die /tmp rechte zu korrigieren |
Beta Was this translation helpful? Give feedback.
-
Wie es aussieht tritt der Fehler nur auf wenn man das dilettantische Script von @SaMMy-lacht nutzt, siehe https://www.digital-eliteboard.com/threads/522593/ |
Beta Was this translation helpful? Give feedback.
-
https://www.ip-phone-forum.de/threads/nach-update-auf-fos-7-50-startet-der-avm-dsld-nicht-und-ein-root-login-per-telnet-ist-nicht-m%C3%B6glich.315112/ |
Beta Was this translation helpful? Give feedback.
-
Bildschirmaufzeichnung vom 21.05.2023, 03:48:29.webm Wenn das mit der Original FW auch so wer würde es schon lange ein Fix Update geben. |
Beta Was this translation helpful? Give feedback.
Wie es aussieht tritt der Fehler nur auf wenn man das dilettantische Script von @SaMMy-lacht nutzt, siehe https://www.digital-eliteboard.com/threads/522593/
Daher nochmal der Hinweis auf https://freetz-ng.github.io/freetz-ng/ADDONS