avm-portfw has dependency FREETZ_AVM_VERSION_07_5X_MAX

[fraternl]

I tried a 7.80 compile for a 7590AX and found out that a dependency of one of my packages for avm-portfw was in conflict with the dependency of avm-portfw itself.
in pkgs/avm-portfw/Config.in it has
depends on FREETZ_AVM_VERSION_07_5X_MAX

This means the package avm-portfw can't be selected in 7.80 and I need it.
Are major versions above 7.50 excluded intentionally?
If so, will there be an effort to enable it for that version?

I have only 1 7590AX and it can run 7.5 just fine if needed.
I do hope I will be able to shift to 7.8 when it becomes available for the 7490 and 7590 which I have plenty.

[fda77]

"people" "reported" it "does not walk" anymore with fos 7.8 ("geht net")
I can not say if this is true as i have no deivce to test by myself as i have not a avm device which supports such a new fos version. An offline-test without device is not possible

• You could remove the "FREETZ_AVM_VERSION_07_5X_MAX" limitation and test if it work
• check how ar7 was changed
• and/or why it does not was able to change the file
• maybe avm uses a complete other way to open port
• find how avm does it
• fix the freetz package to support it again

[Bodenseematze]

@fraternl

I would really be interested in how AVM does store local port forwarding in 7.8

It would really be nice if you would be able to do some tests...
First go to the AVM web interface enable the HTTPS access from internet and set a special (remarkable) port for it (e.g. 7432) - in German FOS you can find that setting at "Internet/Freigaben/FRITZ!Box Dienste" - I don't know how it's called in English version or if it has changed in 7.8...
After doing that (and saving it of course) please open either a terminal session at your box and store your /var/flash/ar7.cfg and transfer it to your PC or use the Freetz Rudi-Shell to directly transfer the file to your PC.
(after that you can of course go again to the AVM web interface and remove / change that HTTPS access again...)

Open the ar7.cfg with an text editor which is able to handle Unix lineendings and search for the above special port (7432) and post all sections of the file where it occurs here...

(and/or you remove / xxx out sensitive data in your ar7.cfg and post the whole file here)