lidar verification

[ashimgiyanani]

The information provided here will be used to create a glossary entry in the IEA Wind Task 32 Wind Lidar Ontology. Please fill in all of the text marked "...".

Before you start

• There is no similar existing entry in the Task 32 lidar glossary.

Proposed new entry

An entry is a combination of a label and a description. Source information can also be included.

Preferred label (required)

The usual label used for the entry, e.g., "probe length"

• lidar verification

Alternative label (optional)

Another word or phrase that could be used for this entry, e.g., "pulse length".

• lidar reverification

Definition (required)

Free text that will be used as the definition for this energy, e.g. "the length over which the line-of-sight wind speed is determined". A source DOI can also be provided as part of the text.

• lidar verification is intended to check that the lidar system meets a set of design specifications, complies with the norms (IEC 61400-12, Measnet, etc.),, has a very high correlation with concurrent and co-located measurements in the same wind flow parameters acquired by meteorological mast-mounted reference sensors. It is majorly an internal process within

Broader Concept (optional)

A parent entry. e.g., "measurement principles". This helps establish semantic meaning in the glossary.

• measurement uncertainty quantification

What happens next?

The new concept will be submitted for its consideration and approved entries will be entered into IEA Wind Task 32 Wind Lidar Ontology.

For interal use only

Please do not change any of the following text. This will be used to help process this issue.

• All required data are present.
• This is a new glossary entry. If not, an existing entry might be changed instead.
• The text has been editted for style.
• The text has been added to definitions.csv.