This is a conceptual overview of Tangram's cameras. For a complete technical reference of camera configuration and parameters, see [[cameras]].
To control the view of the data being mapped, Tangram uses cameras similar to those found in other 3D applications and libraries, with a few twists to accommodate web map conventions.
Most 2D web maps control their view area with a "zoom level", which sets the viewable area of a map and determines which map tiles to load. However, in most 3D contexts (including real life), what you see through a camera is dependent on its position, focal length, and field of view, and there isn't a strict analogue to zoom level.
To support zoom levels in a 3D context, our perspective camera allows position, field of view, and zoom level to be interdependent – each parameter can affect the others in ways that 3D cameras don't normally allow.
Apart from this, our cameras should be recognizable to anyone familiar with 3D. (You can't currently rotate or tilt our cameras.)
Tangram has three camera types: perspective, isometric, and flat. In most ways they are like typical 3D cameras, with some limitations and enhancements to make them better suited to a web map context. For instance, for now you can't tilt or rotate them. Also, their position is set as [lat, long, zoom] instead of in 3D coordinates.
The perspective camera is the most like a 3D camera, but with some unique parameters, including focal_length and vanishing_point.
cameras:
camera1:
type: perspective 
The focal_length parameter is connected to the camera's height, and they modify each other in order to maintain a consistent view area. This allows the "zoom level" of a particular map view to remain constant unless changed directly. (You might know this trick as a "dolly zoom", first used in Hitchcock's Vertigo, and frequently used by Kubrick.)
The effect of changing the focal_length is therefore identical to scaling the height of all 3D objects in the scene, but without changing the geometry at all.
Here's a diagram of a typical perspective view:
With our perspective camera, if you decrease the focal_length, the camera will move toward the model, to keep the field of view consistent:
cameras:
camera1:
type: perspective
focal_length: 2 
The perspective camera also allows the apparent origin of perspective (aka the vanishing point) to be changed – this produces an effect you would normally only get by pointing the camera somewhere else and cropping the resulting view.
cameras:
camera1:
type: perspective
vanishing_point: [1000,-1000] 
More properly called an orthographic or parallel projection, the isometric camera can be thought of as a perspective camera with an infinitely long focal length. It produces a flattened perspective that can resemble satellite photos, or the view through a telephoto lens.
cameras:
camera1:
type: isometricThe isometric camera allows modification to the orthographic axis, to produce effects which would normally require moving and rotating the camera.
cameras:
camera1:
type: isometric
axis: [1, 1] 
The flat camera is a shortcut to a view which can be produced by the other two cameras, but is simpler to setup and use. It has no 3D perspective at all, and shows a perfectly flat top-down view of your map.
cameras:
camera1:
type: flat 