1.29.1

[Koenkk]

Fixes

• TS011F plug cause warnings in HA log #15747 Fix Home Assistant Template variable warning: 'dict object' has no attribute 'latest_version' when rendering '{{ value_json['update']['latest_version'] }}' error (@Koenkk)
• Xiaomi ZNJLBL01LM no longer reports Open or Closed just Opening and Closing #15873 Fix Xiaomi covers broken in Home Assistant (@Koenkk)
• #5246 Fix OTA update check broken (@rccoleman)
• #5255 Fix Sinopé TH1400ZB configure failing (@MattL0)
• #5249 Fix configure of some Hue lights failing (@zegl)
• Interview fails for Sonoff SNZB-03 motion sensor #13600 Fix SONOFF SNZB-0X devices disconnecting from network (@blacknell)
• TS110E dimmer not updating the front end EDIT: still not fixed please reopen #15902 Fix state of TuYa TS110E_1gang_1 not updating (@Koenkk)
• Nodon Sin-4-1-20 ending up read-only #15962 Fix NodOn SIN-4-1-20 not controllable (@Koenkk)
• After configuration of a Ubisys Device i get a (Status 'INSUFFICIENT_SPACE') #15875 Fix INSUFFICIENT_SPACE error for Ubisys devices (@sjorge)
• Iris 3460-L Unsupported Attribute Errors #15971 Fix Iris 3460-L configure failing (@shackrat)

---

This discussion was created from the release 1.29.1.

[cloudbr34k84]

Upgrading now

[gras55]

Issue #15902 still not fixed sadly

[cloudbr34k84]

Are you having issues with devices dropping off, devices not syncing, or synced but when I try and say toggle a light switch they don't do anything??

[didier-guerin85]

I migrated from 1.24.0 to 1.29.1 and I no longer display the workdays schedule and holidays schedule.

Sinon OK

[ondras76]

#13600 Fix SONOFF SNZB-0X devices disconnecting from network - not fixed still, the problem is, the value is not updating on temp. sensor.

[blacknell]

My SNZB-04's are still falling off the network. Even though the battery reporting intervals are now 3600/7200 I'm not seeing changes to the last seen. LQI and battery are high. I think the -04 variant is misbehaving

[blacknell]

I am noticing that Z2M is (over time) updating the reporting intervals on my SNZB-0X devices. Since they are battery devices this needs to happen when the device is next connected (such as sending an open/close or temperature). The coordinator can't initiate an update at will.

I was expecting the new reporting intervals to be updated only when repairing (or at least forcing a soft re-pairing/re-admission) so I wasn't expecting it - @Koenkk is this expected behaviour?

[sjorge]

Sadly, yes. When the configure() changes the next time the device sends a message a reconfigure is triggered. This is to fix/improve devices over time.

I have a script i run every update to (re)apply some custom reporting settings. But having a ‘lock’ checkbox or something for reporting settings the user manually changed would be nice.

I think i filed a feature request for it at one point, but there was no interest in it aside from me.

[Koenkk]

@blacknell as @sjorge explained, when the configure changes yes (which I did with your fix for this device)

[blacknell]

So I waited for my SNZB-04 to fall off the network (despite the fact the reporting had been manually set) and then attempt to update when I open/closed the window.

I got this error message in the log

Debug 2023-01-12 08:11:21 Received Zigbee message from 'contact_bathroom', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":1}' from endpoint 1 with groupID 0
Info 2023-01-12 08:11:21 Configuring 'contact_bathroom'
Debug 2023-01-12 08:11:21 Device 'contact_bathroom' reconnected
Info 2023-01-12 08:11:21 MQTT publish: topic 'zigbee2mqtt/contact_bathroom/availability', payload 'online'
Info 2023-01-12 08:11:21 MQTT publish: topic 'zigbee2mqtt/contact_bathroom', payload '{"battery":100,"battery_low":false,"contact":false,"last_seen":"2023-01-12T08:11:21+00:00","linkquality":61,"tamper":false,"voltage":3000}'
Debug 2023-01-12 08:11:23 Retrieving state of 'contact_bathroom' after reconnect
Debug 2023-01-12 08:11:25 Received Zigbee message from 'contact_bathroom', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":0}' from endpoint 1 with groupID 0
Info 2023-01-12 08:11:25 MQTT publish: topic 'zigbee2mqtt/contact_bathroom', payload '{"battery":100,"battery_low":false,"contact":true,"last_seen":"2023-01-12T08:11:25+00:00","linkquality":72,"tamper":false,"voltage":3000}'
Error 2023-01-12 08:11:31 Failed to configure 'contact_bathroom', attempt 2 (Error: Bind 0x00124b002512ec15/1 genPowerCfg from '0x00124b0024c04f51/1' failed (AREQ - ZDO - bindRsp after 10000ms) at Timeout._onTimeout (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35) at listOnTimeout (node:internal/timers:559:17) at processTimers (node:internal/timers:502:7))