ADuCM350.svd

<?xml version="1.0" encoding="UTF-8" ?>
<!--- This file contains 


This software is MODIFIED for the ADuCM350 processor by LabLab UG, haftungsbeschraenkt ("LabLab")  and subject to the following license agreement:


Analog Devices, Inc. ("ADI")

Software License Agreement

20171208-CM36xCPF-CTSLA

BEFORE YOU SELECT THE "I ACCEPT" BUTTON AT THE BOTTOM OF THIS WINDOW, CAREFULLY READ THE TERMS AND CONDITIONS SET FORTH BELOW.  BY SELECTING THE "I ACCEPT" BUTTON BELOW, OR DOWNLOADING, REPRODUCING, DISTRIBUTING OR OTHERWISE USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS SET FORTH BELOW.  IF YOU DO NOT AGREE TO ALL OF THE TERMS AND CONDITIONS, SELECT THE 'I DO NOT ACCEPT' BUTTON AND YOU MUST NOT DOWNLOAD, INSTALL OR OTHERWISE USE THE SOFTWARE.



DOWNLOADING, REPRODUCING, DISTRIBUTING OR OTHERWISE USING THE SOFTWARE CONSTITUTES ACCEPTANCE OF THIS LICENSE.  THE SOFTWARE MAY NOT BE USED EXCEPT AS EXPRESSLY AUTHORIZED UNDER THIS LICENSE. 



The software is protected by copyright law and international copyright treaties.  



1. License:  Subject to the terms and conditions of this license, the software may be reproduced, modified and distributed in source code and object code form.



2. Conditions: 

(a) Any distribution of the software must include a complete copy of this license and retain all copyright and other proprietary notices.  The software that is distributed (including modified versions of the software) shall be subject to the terms and conditions of this license.  

(b) The software may not be combined or merged with other software in any manner that would cause the software to become subject to terms and conditions which differ from those of this license.

(c) The software is licensed solely and exclusively for use with processors manufactured by or for ADI.

(d) Licensee shall not use the name or any trademark of ADI (including those of its licensors) or any contributor to endorse or promote products without prior written consent of the owner of the name or trademark.  The term "contributor" means any person or entity that modifies or distributes the software.  

(e) Modified versions of the Software must be conspicuously marked as such.

(f) Use of the software may or may not infringe patent rights of one or more patent holders.  This license does not alleviate the obligation to obtain separate licenses from patent holders to use the software.

(g) All rights not expressly granted hereunder are reserved.  

(h) This license shall be governed by the laws of Massachusetts, without regard to its conflict of laws rules.  The software shall only be used in compliance with all applicable laws and regulations, including without limitation export control laws.  



3. WARRANTY DISCLAIMER: THE SOFTWARE AND ANY RELATED INFORMATION AND/OR ADVICE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT REPRESENTATIONS, GUARANTEES OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, ORAL OR WRITTEN, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. There is no obligation to provide software support or updates.  The Software is not fault-tolerant and is not intended for use in high risk applications, including without limitation in the operation of nuclear facilities, aircraft navigation or control systems, air traffic control, life support machines, weapons systems or any other application in which the failure of the software could lead to death, personal injury, or severe physical or environmental damages.  The software is not authorized to be used under such circumstances.



4. LIMITATION OF LIABILITY: TO THE MAXIMUM EXTENT PERMITTED BY LAW ADI (INCLUDING ITS LICENSORS) AND CONTRIBUTORS SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING FROM OR RELATED TO THE SOFTWARE, ITS USE OR ANY RELATED INFORMATION AND/OR SERVICES, INCLUDING BUT NOT LIMITED TO ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, EXEMPLARY, CONSEQUENTIAL OR ANALOGOUS DAMAGES (INCLUDING WITHOUT LIMITATION ANY DAMAGES RESULTING FROM LOSS OF USE, DATA, REVENUE, PROFITS, OR SAVINGS, COMPUTER DAMAGE OR ANY OTHER CAUSE), UNDER ANY LEGAL THEORY (INCLUDING WITHOUT LIMITATION CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT OR PRODUCT LIABILITY), EVEN IF IT HAS BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.  Some jurisdictions do not permit the exclusion or limitation of liability for consequential, incidental or other damages, and, as such, some portion of the above limitation may not apply.  In such jurisdictions, liability is limited to the greatest extent permitted by law.

5.  Third Party Software:  The software may be accompanied by or include software made available by one or more third parties ("Third Party Software").  Each portion of Third Party Software is subject to its own separate software license terms and conditions ("Third Party Licenses").  The Third Party Licenses for Third Party Software delivered with the software are set forth or identified (by url or otherwise) in (i) Appendix A to this license (if any), (ii) the applicable software header or footer text, (iii) a text file located in the directory of the applicable Third Party Software component and/or (iv) such other location customarily used for licensing terms. The use of each portion of Third Party Software is subject to the Third Party Licenses, and you agree that your use of any Third Party Software is bound by the applicable Third Party License.  You agree to review and comply with all applicable Third Party Licenses prior to any use or distribution of any Third Party Software.  Third Party Software is provided on an "as is" basis without any representation, warranty or liability of any kind.  ADI (including its licensors) and contributors shall have no liability or responsibility for the operation or performance of the Third Party Software and shall not be liable for any damages, costs, or expenses, direct or indirect, arising out of the performance or failure to perform of the Third Party Software.  ADI (including its licensors) and contributors shall be entitled to the benefit of any and all limitations of liability and disclaimers of warranties contained in the Third Party Licenses. For the avoidance of doubt, this license does not alter, limit or expand the terms and conditions of, or rights granted to you pursuant to, Third Party Licenses.  



In the event that Third Party Software has only been provided to you in object code form under this Agreement, and the Third Party License requires distribution of the corresponding source code, you may contact software.licensing@analog.com regarding receiving a copy of such source code.  






 -->
<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_1.xsd">
    <vendor>Analog Devices</vendor>
    <vendorID>ADI</vendorID>
	<name>ADUCM350</name>
	<version>0.1</version>
	<description>Cortex-M3 Microcontroller Device</description>
	<addressUnitBits>8</addressUnitBits>
	<width>32</width>
	<series>ARMCM3</series>
	<!-- Register Default Properties -->
	<!-- the size of the registers is set to a bit width of 32. This can be overruled for individual peripherals and/or registers -->
	<size>32</size>
	<!-- the access to all registers is set to be readable and writeable. This can be overruled for individual peripherals and/or registers -->
	<access>read-write</access>
	<!-- for demonstration purposes the resetValue for all registers of the device is set to be 0. This can be overruled within the description -->
	<resetValue>0</resetValue>
	<!-- the resetMask = 0 specifies that by default no register of this device has a defined reset value -->
	<resetMask>0</resetMask>
	<cpu>
		<name>CM3</name>
		<revision>r2p0</revision>
		<endian>little</endian>
		<mpuPresent>false</mpuPresent>
		<fpuPresent>false</fpuPresent>
		<nvicPrioBits>3</nvicPrioBits>
		<vendorSystickConfig>false</vendorSystickConfig>
	</cpu>
	<peripherals>
		<peripheral>
			<name>ADI_T0</name>
			<description>Timer 0</description>
			<groupName>T0</groupName>
			<baseAddress>0x40000000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x20</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>TIMER0</name>
				<value>11</value>
			</interrupt>
			<registers>
				<register>
					<name>GPT0LD</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>16-bit load value</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Load value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>GPT0VAL</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>"16-bit timer value, read only."</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>GPT0CON</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>Control Register</description>
					<fields>
						<field>
							<name>EVENTEN</name>
							<description>Enable time capture of an event</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EVENT</name>
							<description>Event Select, selects 1 of the available events.</description>
							<bitOffset>8</bitOffset>
							<bitWidth>4</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>T2</name>
									<value>0</value>
									<description>- Wakeup Timer</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT0</name>
									<value>1</value>
									<description>- External interrupt 0</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT1</name>
									<value>2</value>
									<description>- External interrupt 1</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT2</name>
									<value>3</value>
									<description>- External interrupt 2</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT3</name>
									<value>4</value>
									<description>- External interrupt 3</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT4</name>
									<value>5</value>
									<description>- External interrupt 4</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT5</name>
									<value>6</value>
									<description>- External interrupt 5</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT6</name>
									<value>7</value>
									<description>- External interrupt 6</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT7</name>
									<value>8</value>
									<description>- External interrupt 7</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>T3</name>
									<value>9</value>
									<description>- Watchdog timer</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>T1</name>
									<value>10</value>
									<description>- Timer1</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>ADC0</name>
									<value>11</value>
									<description>- ADC0</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>ADC1</name>
									<value>12</value>
									<description>- ADC1</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>STEP</name>
									<value>13</value>
									<description>- STEP</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>DMADONE</name>
									<value>14</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FEE</name>
									<value>15</value>
									<description>- Flash controller</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RLD</name>
							<description>Timer reload on write to clear register</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLK</name>
							<description>Clock Select</description>
							<bitOffset>5</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>UCLK</name>
									<value>0</value>
									<description>- System Clock</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>PCLK</name>
									<value>1</value>
									<description>- Peripheral clock</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFOSC</name>
									<value>2</value>
									<description>- Internal 32 kHz Oscillator</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFXTAL</name>
									<value>3</value>
									<description>- External 32 kHz crystal</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Enable</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MOD</name>
							<description>Mode</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>FREERUN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PERIODIC</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UP</name>
							<description>Count-up</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PRE</name>
							<description>Prescaler</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV256</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32768</name>
									<value>3</value>
									<description>- If the selected clock source is UCLK then this setting results in a prescaler of 4.</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T0CLRI</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>Clear interrupt register</description>
					<fields>
						<field>
							<name>CAP</name>
							<description>Clear captured event interrupt</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TMOUT</name>
							<description>Clear timeout interrupt</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T0CAP</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Capture Register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Capture value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T0STA</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000010</size>
					<description>Status Register</description>
					<fields>
						<field>
							<name>CLRI</name>
							<description>Value updated in the timer clock domain</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON</name>
							<description>Ready to receive commands</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CAP</name>
							<description>Capture event pending</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TMOUT</name>
							<description>Time out event occurred</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
<!--
		<peripheral>
			<name>ADI_T1</name>
			<description>Timer 1</description>
			<groupName>T1</groupName>
			<baseAddress>0x40000400</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x20</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>TIMER1</name>
				<value>12</value>
			</interrupt>
			<registers>
				<register>
					<name>T1LD</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>16-bit load value</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Load value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T1VAL</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>"16-bit timer value, read only."</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T1CON</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>Control Register</description>
					<fields>
						<field>
							<name>EVENTEN</name>
							<description>Enable time capture of an event</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EVENT</name>
							<description>Event Select, selects 1 of the available events.</description>
							<bitOffset>8</bitOffset>
							<bitWidth>4</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>COM</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>T0</name>
									<value>1</value>
									<description>- Timer0</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI0</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI1</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>I2CS</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>I2CM</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DMAERR</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DMADONE</name>
									<value>7</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT1</name>
									<value>8</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT2</name>
									<value>9</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXT3</name>
									<value>10</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWMTRIP</name>
									<value>11</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM0</name>
									<value>12</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM1</name>
									<value>13</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM2</name>
									<value>14</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ADC0</name>
									<value>15</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RLD</name>
							<description>Timer reload on write to clear register</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLK</name>
							<description>Clock Select</description>
							<bitOffset>5</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>UCLK</name>
									<value>0</value>
									<description>- System Clock</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>PCLK</name>
									<value>1</value>
									<description>- Peripheral clock</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFOSC</name>
									<value>2</value>
									<description>- Internal 32 kHz Oscillator</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFXTAL</name>
									<value>3</value>
									<description>- External 32 kHz crystal</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Enable</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MOD</name>
							<description>Mode</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>FREERUN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PERIODIC</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UP</name>
							<description>Count-up</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PRE</name>
							<description>Prescaler</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV256</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32768</name>
									<value>3</value>
									<description>- If the selected clock source is UCLK then this setting results in a prescaler of 4.</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T1CLRI</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>Clear interrupt register</description>
					<fields>
						<field>
							<name>CAP</name>
							<description>Clear captured event interrupt</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TMOUT</name>
							<description>Clear timeout interrupt</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T1CAP</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Capture Register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Capture value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T1STA</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000010</size>
					<description>Status Register</description>
					<fields>
						<field>
							<name>CLRI</name>
							<description>Value updated in the timer clock domain</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON</name>
							<description>Ready to receive commands</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CAP</name>
							<description>Capture event pending</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TMOUT</name>
							<description>Time out event occurred</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_PWM</name>
			<description>Pulse Width Modulation</description>
			<groupName>PWM</groupName>
			<baseAddress>0x40001000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x40</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>PWM_TRIP</name>
				<value>35</value>
			</interrupt>
			<interrupt>
				<name>PWM_PAIR0</name>
				<value>36</value>
			</interrupt>
			<interrupt>
				<name>PWM_PAIR1</name>
				<value>37</value>
			</interrupt>
			<interrupt>
				<name>PWM_PAIR2</name>
				<value>38</value>
			</interrupt>
			<registers>
				<register>
					<name>PWMCON0</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>PWM Control register</description>
					<fields>
						<field>
							<name>SYNC</name>
							<description>PWM Synchronization</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM5INV</name>
							<description>Inversion of PWM output</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM3INV</name>
							<description>Inversion of PWM output</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM1INV</name>
							<description>Inversion of PWM output</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWMIEN</name>
							<description>Enables PWM interrupts</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENA</name>
							<description>enable PWM outputs</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PRE</name>
							<description>PWM Clock Prescaler</description>
							<bitOffset>6</bitOffset>
							<bitWidth>3</bitWidth>
						</field>
						<field>
							<name>POINV</name>
							<description>Invert all PWM outputs</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>HOFF</name>
							<description>High Side Off</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LCOMP</name>
							<description>Load Compare Registers</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DIR</name>
							<description>Direction Control</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MOD</name>
							<description>Enables H-Bridge Mode</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Enables all PWM outputs</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>PWMCON1</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>Trip control register</description>
					<fields>
						<field>
							<name>CONVSTART</name>
							<description>Enable adc conversion start from pwm</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TRIPEN</name>
							<description>Enable PWM trip functionality</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CONVSTARTDELAY</name>
							<description>ADC conversion start delay configuration</description>
							<bitOffset>0</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>PWMCLRI</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>PWM interrupt clear. Write to this register clears the latched PWM interrupt.</description>
					<fields>
						<field>
							<name>TRIP</name>
							<description>Clear the latched trip interrupt</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM2</name>
							<description>Clear the latched PWM2 interrupt</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM1</name>
							<description>Clear the latched PWM1 interrupt</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM0</name>
							<description>Clear the latched PWM0 interrupt</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>PWM0COM0</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 0 for PWM0 and PWM1</description>
				</register>
				<register>
					<name>PWM0COM1</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 1 for PWM0 and PWM1</description>
				</register>
				<register>
					<name>PWM0COM2</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 2 for PWM0 and PWM1</description>
				</register>
				<register>
					<name>PWM0LEN</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000010</size>
					<description>Period Value register for PWM0 and PWM1</description>
				</register>
				<register>
					<name>PWM1COM0</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 0 for PWM2 and PWM3</description>
				</register>
				<register>
					<name>PWM1COM1</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 1 for PWM2 and PWM3</description>
				</register>
				<register>
					<name>PWM1COM2</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 2 for PWM2 and PWM3</description>
				</register>
				<register>
					<name>PWM1LEN</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000010</size>
					<description>Period Value register for PWM2 and PWM3</description>
				</register>
				<register>
					<name>PWM2COM0</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 0 for PWM4 and PWM5</description>
				</register>
				<register>
					<name>PWM2COM1</name>
					<addressOffset>0x00000034</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 1 for PWM4 and PWM5</description>
				</register>
				<register>
					<name>PWM2COM2</name>
					<addressOffset>0x00000038</addressOffset>
					<size>0x00000010</size>
					<description>Compare Register 2 for PWM4 and PWM5</description>
				</register>
				<register>
					<name>PWM2LEN</name>
					<addressOffset>0x0000003C</addressOffset>
					<size>0x00000010</size>
					<description>Period Value register for PWM4 and PWM5</description>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_PWRCTL</name>
			<description>Power Management Unit</description>
			<groupName>PWRCTL</groupName>
			<baseAddress>0x40002400</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x80</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>PWRMOD</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000008</size>
					<description>Power modes register</description>
					<fields>
						<field>
							<name>WICENACK</name>
							<description>For Deepsleep mode only</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MOD</name>
							<description>Power Mode</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>FULLACTIVE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>MCUHALT</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PERHALT</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SYSHALT</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TOTALHALT</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIBERNATE</name>
									<value>5</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>PWRKEY</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>Key protection for the PWRMOD register.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Key value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>KEY1</name>
									<value>18521</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>KEY2</name>
									<value>62075</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_RESET</name>
			<description>Reset</description>
			<groupName>RESET</groupName>
			<baseAddress>0x40002440</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x4</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>RSTSTA</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000008</size>
					<description>Reset Status</description>
					<fields>
						<field>
							<name>SWRST</name>
							<description>Software reset status bit</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WDRST</name>
							<description>Watchdog reset status bit</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTRST</name>
							<description>External reset status bit</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>POR</name>
							<description>Power-on reset status bit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>RSTCLR</name>
					<alternateRegister>RSTSTA</alternateRegister>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000008</size>
					<description>Reset Status Clear</description>
					<fields>
						<field>
							<name>SWRST</name>
							<description>Software reset status bit</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WDRST</name>
							<description>Watchdog reset status bit</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTRST</name>
							<description>External reset status bit</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>POR</name>
							<description>Power-on reset status bit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_INTERRUPT</name>
			<description>Interrupts</description>
			<groupName>INTERRUPT</groupName>
			<baseAddress>0x40002420</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x18</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>EINT0</name>
				<value>1</value>
			</interrupt>
			<interrupt>
				<name>EINT1</name>
				<value>2</value>
			</interrupt>
			<interrupt>
				<name>EINT2</name>
				<value>3</value>
			</interrupt>
			<interrupt>
				<name>EINT3</name>
				<value>4</value>
			</interrupt>
			<interrupt>
				<name>EINT4</name>
				<value>5</value>
			</interrupt>
			<interrupt>
				<name>EINT5</name>
				<value>6</value>
			</interrupt>
			<interrupt>
				<name>EINT6</name>
				<value>7</value>
			</interrupt>
			<interrupt>
				<name>EINT7</name>
				<value>8</value>
			</interrupt>
			<registers>
				<register>
					<name>EI0CFG</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>External Interrupt configuration register 0</description>
					<fields>
						<field>
							<name>IRQ3EN</name>
							<description>External Interrupt 3 Enable</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ3MDE</name>
							<description>External Interrupt 0 Mode</description>
							<bitOffset>12</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ2EN</name>
							<description>External Interrupt 2 Enable</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ2MDE</name>
							<description>External Interrupt 2 Mode</description>
							<bitOffset>8</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ1EN</name>
							<description>External Interrupt 1 Enable</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ1MDE</name>
							<description>External Interrupt 1 Mode</description>
							<bitOffset>4</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ0EN</name>
							<description>External Interrupt 0 Enable</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ0MDE</name>
							<description>External Interrupt 0 Mode</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>EI1CFG</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>External Interrupt configuration register 1</description>
					<fields>
						<field>
							<name>IRQ7EN</name>
							<description>External Interrupt 7 Enable</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ7MDE</name>
							<description>External Interrupt 7 Mode</description>
							<bitOffset>12</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ6EN</name>
							<description>External Interrupt 6 Enable</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ6MDE</name>
							<description>External Interrupt 6 Mode</description>
							<bitOffset>8</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ5EN</name>
							<description>External Interrupt 5 Enable</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ5MDE</name>
							<description>External Interrupt 5 Mode</description>
							<bitOffset>4</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ4EN</name>
							<description>External Interrupt 4 Enable</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ4MDE</name>
							<description>External Interrupt 4 Mode</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RISE</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FALL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>RISEORFALL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGHLEVEL</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LOWLEVEL</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>EICLR</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>External Interrupts Clear register</description>
					<fields>
						<field>
							<name>IRQ7</name>
							<description>Clears External interrupt 7 internal flag</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ6</name>
							<description>Clears External interrupt 6 internal flag</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ5</name>
							<description>Clears External interrupt 5 internal flag</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ4</name>
							<description>Clears External interrupt 4 internal flag</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ3</name>
							<description>Clears External interrupt 3 internal flag</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ2</name>
							<description>Clears External interrupt 2 internal flag</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ1</name>
							<description>Clears External interrupt 1 internal flag</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ0</name>
							<description>Clears External interrupt 0 internal flag</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_WDT</name>
			<description>Watchdog Timer</description>
			<groupName>WDT</groupName>
			<baseAddress>0x40002580</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x1C</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>T3LD</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Load value.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T3VAL</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>"Current count value, read only."</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T3CON</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>Control Register</description>
					<fields>
						<field>
							<name>MOD</name>
							<description>Mode</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>FREERUN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PERIODIC</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Enable</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PRE</name>
							<description>Prescaler</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV256</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV4096</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ</name>
							<description>Timer Interrupt ,</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PD</name>
							<description>Power down clear</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T3CLRI</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>"Clear interrupt, write only."</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Clear Watchdog</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>52428</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T3STA</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>"Status register, read only."</description>
					<fields>
						<field>
							<name>LOCK</name>
							<description>Lock status bit</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON</name>
							<description>T3CON write sync in progress</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LD</name>
							<description>T3LD write sync in progress</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLRI</name>
							<description>T3CLRI write sync in progress</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ</name>
							<description>Interrupt Pending</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_WUT</name>
			<description>WakeUp Timer</description>
			<groupName>WUT</groupName>
			<baseAddress>0x40002500</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x44</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>T2VAL0</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Current count value LSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2VAL1</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>Current count value MSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2CON</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>Control Register</description>
					<fields>
						<field>
							<name>STOPINC</name>
							<description>Stop wake up field A being updated</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLK</name>
							<description>Clock</description>
							<bitOffset>9</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>PCLK</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFXTAL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFOSC</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXTCLK</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUEN</name>
							<description>WUEN</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Enable</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MOD</name>
							<description>Mode</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>PERIODIC</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FREERUN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>FREEZE</name>
							<description>Freeze</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PRE</name>
							<description>Prescaler</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV256</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32768</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T2INC</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>12-bit register. Wake up field A</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>12 bit value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>12</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFB0</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field B  LSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFB1</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field B  MSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFC0</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field C  LSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFC1</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field C  MSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFD0</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field D  LSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFD1</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field D  MSB</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2IEN</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000010</size>
					<description>Interrupt enable</description>
					<fields>
						<field>
							<name>ROLL</name>
							<description>Enable interrupt on Rollover</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFD</name>
							<description>Enable interrupt on WUFD</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFC</name>
							<description>Enable interrupt on WUFC</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFB</name>
							<description>Enable interrupt on WUFB</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFA</name>
							<description>Enable interrupt on WUFA</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T2STA</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000010</size>
					<description>Status</description>
					<fields>
						<field>
							<name>CON</name>
							<description>Sync</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>FREEZE</name>
							<description>Timer Value Freeze</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ROLL</name>
							<description>Rollover Interrupt</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFD</name>
							<description>WUFD Interrupt</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFC</name>
							<description>WUFC Interrupt</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFB</name>
							<description>WUFB Interrupt</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFA</name>
							<description>WUFA Interrupt</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T2CLRI</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000010</size>
					<description>Clear interrupts. Write only.</description>
					<fields>
						<field>
							<name>ROLL</name>
							<description>Clear interrupt on Rollover</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFD</name>
							<description>Clear interrupt on WUFD</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFC</name>
							<description>Clear interrupt on WUFC</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFB</name>
							<description>Clear interrupt on WUFB</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WUFA</name>
							<description>Clear interrupt on WUFA</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFA0</name>
					<addressOffset>0x0000003C</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field A  LSB.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>T2WUFA1</name>
					<addressOffset>0x00000040</addressOffset>
					<size>0x00000010</size>
					<description>Wake up field A MSB.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_CLKCTL</name>
			<description>Clock Control</description>
			<groupName>CLKCTL</groupName>
			<baseAddress>0x40002000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x448</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>CLKCON0</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>System clocking architecture control register</description>
					<fields>
						<field>
							<name>CLKOUT</name>
							<description>GPIO output clock multiplexer select bits</description>
							<bitOffset>5</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>UCLKCG</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UCLK</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PCLK</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HFOSC</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFOSC</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFXTAL</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLKMUX</name>
							<description>Digital subsystem clock source select bits.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>HFOSC</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFXTAL</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>LFOSC</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXTCLK</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CD</name>
							<description>Clock divide bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>CLKCON1</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>System Clocks Control Register 1</description>
					<fields>
						<field>
							<name>PWMCD</name>
							<description>Clock divide bits for PWM system clock</description>
							<bitOffset>12</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTCD</name>
							<description>Clock divide bits for UART system clock</description>
							<bitOffset>9</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CCD</name>
							<description>Clock divide bits for I2C system clock</description>
							<bitOffset>6</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1CD</name>
							<description>Clock divide bits for SPI1 system clock</description>
							<bitOffset>3</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI0CD</name>
							<description>Clock divide bits for SPI0 system clock</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIV1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIV128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>CLKDIS</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000010</size>
					<description>System Clocks Control Register 1</description>
					<fields>
						<field>
							<name>DISADCCLK</name>
							<description>Disable ADC system clock</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DISDMACLK</name>
							<description>Disable DMA system clock</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DISDACCLK</name>
							<description>Disable DAC system clock</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DIST1CLK</name>
							<description>Disable Timer 1 system clock</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DIST0CLK</name>
							<description>Disable Timer 0 system clock</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DISPWMCLK</name>
							<description>Disable PWM system clock</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DISUARTCLK</name>
							<description>Disable UART system clock</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DISI2CCLK</name>
							<description>Disable I2C system clock</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DISSPI1CLK</name>
							<description>Disable SPI1 system clock</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DISSPI0CLK</name>
							<description>Disable SPI0 system clock bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>XOSCCON</name>
					<addressOffset>0x00000410</addressOffset>
					<size>0x00000008</size>
					<description>Crystal Oscillator control</description>
					<fields>
						<field>
							<name>DIV2</name>
							<description>Divide by two enable</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Crystal oscillator circuit enable (Enable the oscillator circuitry.)</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>CLKSYSDIV</name>
					<addressOffset>0x00000444</addressOffset>
					<size>0x00000010</size>
					<description>Sys Clock div2 Register</description>
					<fields>
						<field>
							<name>DIV2EN</name>
							<description>bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_FEE</name>
			<description>Flash Controller</description>
			<groupName>FEE</groupName>
			<baseAddress>0x40002800</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x84</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>SINC2</name>
				<value>15</value>
			</interrupt>
			<interrupt>
				<name>FLASH</name>
				<value>16</value>
			</interrupt>
			<registers>
				<register>
					<name>FEESTA</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Status Register</description>
					<fields>
						<field>
							<name>SIGNERR</name>
							<description>Info space signature check on reset error</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CMDRES</name>
							<description>Command result</description>
							<bitOffset>4</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SUCCESS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PROTECTED</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>VERIFYERR</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ABORT</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WRDONE</name>
							<description>Write Complete</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CMDDONE</name>
							<description>Command complete</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WRBUSY</name>
							<description>Write busy</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CMDBUSY</name>
							<description>Command busy</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>FEECON0</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>Command Control Register</description>
					<fields>
						<field>
							<name>WREN</name>
							<description>Write enable.</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENERR</name>
							<description>Error interrupt enable</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENCMD</name>
							<description>Command complete interrupt enable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>FEECMD</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>Command register</description>
					<fields>
						<field>
							<name>CMD</name>
							<description>Command</description>
							<bitOffset>0</bitOffset>
							<bitWidth>4</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IDLE</name>
									<value>0</value>
									<description>- No command executed</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>ERASEPAGE</name>
									<value>1</value>
									<description>- Erase Page</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>SIGN</name>
									<value>2</value>
									<description>- Sign Range</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>MASSERASE</name>
									<value>3</value>
									<description>- Mass Erase User Space</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>ABORT</name>
									<value>4</value>
									<description>- Abort a running command</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEADR0L</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Low Page  (Lower 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEADR0H</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>Low Page  (Upper 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEADR1L</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>Hi Page  (Lower 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEADR1H</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000010</size>
					<description>Hi Page  (Upper 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEKEY</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000010</size>
					<description>Key</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>USERKEY1</name>
									<value>62550</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>USERKEY2</name>
									<value>61731</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEPROL</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000010</size>
					<description>Write Protection (Lower 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEPROH</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000010</size>
					<description>Write Protection (Upper 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEESIGL</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000010</size>
					<description>Signature (Lower 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEESIGH</name>
					<addressOffset>0x00000034</addressOffset>
					<size>0x00000010</size>
					<description>Signature (Upper 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEECON1</name>
					<addressOffset>0x00000038</addressOffset>
					<size>0x00000010</size>
					<description>User Setup register</description>
					<fields>
						<field>
							<name>DBG</name>
							<description>Serial Wire debug enable ,</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEADRAL</name>
					<addressOffset>0x00000048</addressOffset>
					<size>0x00000010</size>
					<description>Abort address (Lower 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEADRAH</name>
					<addressOffset>0x0000004C</addressOffset>
					<size>0x00000010</size>
					<description>Abort address (Upper 16 bits)</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEAEN0</name>
					<addressOffset>0x00000078</addressOffset>
					<size>0x00000010</size>
					<description>Lower 16 bits of the sys irq abort enable register.</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>TBD</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>TBD</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>TBD</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>T1</name>
							<description>TBD</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>T0</name>
							<description>TBD</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>T3</name>
							<description>TBD</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT7</name>
							<description>TBD</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT6</name>
							<description>TBD</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT5</name>
							<description>TBD</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT4</name>
							<description>TBD</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT3</name>
							<description>TBD</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT2</name>
							<description>TBD</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT1</name>
							<description>TBD</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTINT0</name>
							<description>TBD</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>T2</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEAEN1</name>
					<addressOffset>0x0000007C</addressOffset>
					<size>0x00000010</size>
					<description>Upper 16 bits of the sys irq abort enable register.</description>
					<fields>
						<field>
							<name>DMADAC</name>
							<description>TBD</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAI2CMRX</name>
							<description>TBD</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAI2CMTX</name>
							<description>TBD</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAI2CSRX</name>
							<description>TBD</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAI2CSTX</name>
							<description>TBD</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAUARTRX</name>
							<description>TBD</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAUARTTX</name>
							<description>TBD</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMASPI1RX</name>
							<description>TBD</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMASPI1TX</name>
							<description>TBD</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAERROR</name>
							<description>TBD</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CM</name>
							<description>TBD</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CS</name>
							<description>TBD</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1</name>
							<description>TBD</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI0</name>
							<description>TBD</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UART</name>
							<description>TBD</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>FEE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>FEEAEN2</name>
					<addressOffset>0x00000080</addressOffset>
					<size>0x00000010</size>
					<description>Upper 32..47 bits of the sys irq abort enable register.</description>
					<fields>
						<field>
							<name>PWM2</name>
							<description>TBD</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM1</name>
							<description>TBD</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWM0</name>
							<description>TBD</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PWMTRIP</name>
							<description>TBD</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMASINC2</name>
							<description>TBD</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAADC1</name>
							<description>TBD</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DMAADC0</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_I2C</name>
			<description>I2C</description>
			<groupName>I2C</groupName>
			<baseAddress>0x40003000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x54</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>I2CS</name>
				<value>20</value>
			</interrupt>
			<interrupt>
				<name>I2CM</name>
				<value>21</value>
			</interrupt>
			<registers>
				<register>
					<name>I2CMCON</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Master Control Register</description>
					<fields>
						<field>
							<name>TXDMA</name>
							<description>Enable master Tx DMA request</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXDMA</name>
							<description>Enable master Rx DMA request</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENCMP</name>
							<description>Transaction completed interrupt enable</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENNACK</name>
							<description>ACK not received interrupt enable</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENALOST</name>
							<description>Arbitration lost interrupt enable</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENTX</name>
							<description>Transmit request interrupt enable</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENRX</name>
							<description>Receive request interrupt enable</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STRETCH</name>
							<description>Stretch SCL</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LOOPBACK</name>
							<description>Internal loop back</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>COMPETE</name>
							<description>Compete for ownership</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MAS</name>
							<description>Master Enable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CMSTA</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000010</size>
					<description>Master Status Register</description>
					<fields>
						<field>
							<name>TXUR</name>
							<description>Master Transmit FIFO underflow</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MSTOP</name>
							<description>STOP driven by th eI2C master</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LINEBUSY</name>
							<description>Line is busy</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXOF</name>
							<description>Receive FIFO overflow</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TCOMP</name>
							<description>Transaction completed</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>NACKDATA</name>
							<description>Ack not received in response to data write</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUSY</name>
							<description>Master Busy</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ALOST</name>
							<description>Arbitration lost</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>NACKADDR</name>
							<description>Ack not received in response to an address</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXREQ</name>
							<description>Receive request</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXREQ</name>
							<description>Transmit request</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXFSTA</name>
							<description>Transmit FIFO Status</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FULL</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CMRX</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000008</size>
					<description>Master Receive Data</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Receive Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CMTX</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000008</size>
					<description>Master Transmit Data</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Transmit Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CMRXCNT</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Master Receive Data Count</description>
					<fields>
						<field>
							<name>EXTEND</name>
							<description>Extended Read</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>COUNT</name>
							<description>Receive count</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CMCRXCNT</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>Master Current Receive Data Count</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Current Receive count</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CADR0</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000008</size>
					<description>1st Master Address Byte</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Address byte</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CADR1</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000008</size>
					<description>2nd Master Address Byte</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Address byte</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CDIV</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000010</size>
					<description>Serial clock period divisor register</description>
					<fields>
						<field>
							<name>HIGH</name>
							<description>High Time</description>
							<bitOffset>8</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
						<field>
							<name>LOW</name>
							<description>Low Time</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CSCON</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000010</size>
					<description>Slave Control Register</description>
					<fields>
						<field>
							<name>TXDMA</name>
							<description>Enable slave Tx DMA request</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXDMA</name>
							<description>Enable slave Rx DMA request</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENREPST</name>
							<description>Repeated start interrupt enable</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENTX</name>
							<description>Transmit request interrupt enable</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENRX</name>
							<description>Receive request interrupt enable</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENSTOP</name>
							<description>Stop condition detected interrupt enable</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>NACK</name>
							<description>NACK next communication</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STRETCH</name>
							<description>Stretch SCL</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EARLYTXR</name>
							<description>Early transmit request mode</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GCSB</name>
							<description>General call status bit clear</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>HGC</name>
							<description>Hardware general Call enable</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GC</name>
							<description>General Call enable</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADR10</name>
							<description>Enable 10 bit addressing</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SLV</name>
							<description>Slave Enable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CSSTA</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000010</size>
					<description>"Slave I2C Status, Error and IRQ Register"</description>
					<fields>
						<field>
							<name>START</name>
							<description>Start and matching address</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>REPSTART</name>
							<description>Repeated start and matching address</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IDMAT</name>
							<description>Device ID matched</description>
							<bitOffset>11</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STOP</name>
							<description>Stop after start and matching address</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GCID</name>
							<description>General ID</description>
							<bitOffset>8</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GCINT</name>
							<description>General call</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUSY</name>
							<description>Slave busy</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>NOACK</name>
							<description>Ack not generated by the slave</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXOF</name>
							<description>Receive FIFO</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXREQ</name>
							<description>Receive</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXREQ</name>
							<description>Transmit</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXUR</name>
							<description>Transmit FIFO underflow</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXFSEREQ</name>
							<description>Tx FIFO status or early request</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CSRX</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000010</size>
					<description>Slave Receive Data Register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Receive register</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CSTX</name>
					<addressOffset>0x00000034</addressOffset>
					<size>0x00000010</size>
					<description>Slave Transmit Data Register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Transmit register</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CALT</name>
					<addressOffset>0x00000038</addressOffset>
					<size>0x00000010</size>
					<description>Hardware General Call ID</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Alt register</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CID0</name>
					<addressOffset>0x0000003C</addressOffset>
					<size>0x00000010</size>
					<description>1st Slave Address Device ID</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Slave ID</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CID1</name>
					<addressOffset>0x00000040</addressOffset>
					<size>0x00000010</size>
					<description>2nd Slave Address Device ID</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Slave ID</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CID2</name>
					<addressOffset>0x00000044</addressOffset>
					<size>0x00000010</size>
					<description>3rd Slave Address Device ID</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Slave ID</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CID3</name>
					<addressOffset>0x00000048</addressOffset>
					<size>0x00000010</size>
					<description>4th Slave Address Device ID</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Slave ID</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>I2CFSTA</name>
					<addressOffset>0x0000004C</addressOffset>
					<size>0x00000010</size>
					<description>Master and Slave Rx/Tx FIFO Status Register</description>
					<fields>
						<field>
							<name>MFLUSH</name>
							<description>Flush the master transmit FIFO</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SFLUSH</name>
							<description>Flush the slave transmit FIFO</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MRXFSTA</name>
							<description>Master receive FIFO Status</description>
							<bitOffset>6</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MTXFSTA</name>
							<description>Master Transmit FIFO Status</description>
							<bitOffset>4</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SRXFSTA</name>
							<description>Slave receive FIFO Status</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STXFSTA</name>
							<description>Slave Transmit FIFO Status</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_SPI0</name>
			<description>Serial Peripheral Interface</description>
			<groupName>SPI0</groupName>
			<baseAddress>0x40004000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x1C</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>SPI0</name>
				<value>18</value>
			</interrupt>
			<registers>
				<register>
					<name>SPI0STA</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Status Register</description>
					<fields>
						<field>
							<name>CSERR</name>
							<description>Detected an abrupt CS deassertion</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXS</name>
							<description>Set when there are more bytes in the RX FIFO than the TIM bit says</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXFSTA</name>
							<description>Receive FIFO Status</description>
							<bitOffset>8</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>THREEBYTES</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FOURBYTES</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXOF</name>
							<description>Receive FIFO overflow</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RX</name>
							<description>Set when a receive interrupt occurs</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TX</name>
							<description>Set when a transmit interrupt occurs</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXUR</name>
							<description>Transmit FIFO underflow</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXFSTA</name>
							<description>transmit FIFO Status</description>
							<bitOffset>1</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>THREEBYTES</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FOURBYTES</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ</name>
							<description>Interrupt status bit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI0RX</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>8-bit Receive register.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Received data</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI0TX</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000008</size>
					<description>8-bit Transmit register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Data to transmit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI0DIV</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>SPI Clock Divider Registers</description>
					<fields>
						<field>
							<name>BCRST</name>
							<description>Bit counter reset</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DIV</name>
							<description>Factor used to divide UCLK to generate the serial clock</description>
							<bitOffset>0</bitOffset>
							<bitWidth>6</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI0CON</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>16-bit configuration register</description>
					<fields>
						<field>
							<name>MOD</name>
							<description>SPI IRQ Mode bits</description>
							<bitOffset>14</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TX1RX1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TX2RX2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TX3RX3</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TX4RX4</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TFLUSH</name>
							<description>TX FIFO Flush Enable bit</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RFLUSH</name>
							<description>RX FIFO Flush Enable bit</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON</name>
							<description>Continuous transfer enable</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LOOPBACK</name>
							<description>Loopback enable bit</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SOEN</name>
							<description>Slave MISO output enable bit</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXOF</name>
							<description>RX Oveflow Overwrite enable</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ZEN</name>
							<description>Transmit zeros when empty</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TIM</name>
							<description>Transfer and interrupt mode</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RXRD</name>
									<value>0</value>
									<description>- Cleared by user to initiate transfer with a read of the SPIRX register</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>TXWR</name>
									<value>1</value>
									<description>- Set by user to initiate transfer with a write to the SPITX register.</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LSB</name>
							<description>LSB First Transfer enable</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WOM</name>
							<description>Wired OR enable</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CPOL</name>
							<description>Clock polarity mode</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CPHA</name>
							<description>Clock phase mode</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SAMPLELEADING</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SAMPLETRAILING</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MASEN</name>
							<description>Master enable</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>SPI Enable bit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI0DMA</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>DMA enable register</description>
					<fields>
						<field>
							<name>IENRXDMA</name>
							<description>Enable receive DMA request</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENTXDMA</name>
							<description>Enable transmit DMA request</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Enable DMA for data transfer</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI0CNT</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>8-bit received byte count register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Count</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_SPI1</name>
			<description>Serial Peripheral Interface</description>
			<groupName>SPI1</groupName>
			<baseAddress>0x40004400</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x1C</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>SPI1</name>
				<value>19</value>
			</interrupt>
			<registers>
				<register>
					<name>SPI1STA</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Status Register</description>
					<fields>
						<field>
							<name>CSERR</name>
							<description>Detected an abrupt CS deassertion</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXS</name>
							<description>Set when there are more bytes in the RX FIFO than the TIM bit says</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXFSTA</name>
							<description>Receive FIFO Status</description>
							<bitOffset>8</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>THREEBYTES</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FOURBYTES</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXOF</name>
							<description>Receive FIFO overflow</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RX</name>
							<description>Set when a receive interrupt occurs</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TX</name>
							<description>Set when a transmit interrupt occurs</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXUR</name>
							<description>Transmit FIFO underflow</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TXFSTA</name>
							<description>transmit FIFO Status</description>
							<bitOffset>1</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>EMPTY</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ONEBYTE</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWOBYTES</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>THREEBYTES</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>FOURBYTES</name>
									<value>4</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IRQ</name>
							<description>Interrupt status bit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI1RX</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>8-bit Receive register.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Received data</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI1TX</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000008</size>
					<description>8-bit Transmit register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Data to transmit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI1DIV</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>SPI Clock Divider Registers</description>
					<fields>
						<field>
							<name>BCRST</name>
							<description>Bit counter reset</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DIV</name>
							<description>Factor used to divide UCLK to generate the serial clock</description>
							<bitOffset>0</bitOffset>
							<bitWidth>6</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI1CON</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>16-bit configuration register</description>
					<fields>
						<field>
							<name>MOD</name>
							<description>SPI IRQ Mode bits</description>
							<bitOffset>14</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TX1RX1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TX2RX2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TX3RX3</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TX4RX4</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TFLUSH</name>
							<description>TX FIFO Flush Enable bit</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RFLUSH</name>
							<description>RX FIFO Flush Enable bit</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON</name>
							<description>Continuous transfer enable</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LOOPBACK</name>
							<description>Loopback enable bit</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SOEN</name>
							<description>Slave MISO output enable bit</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RXOF</name>
							<description>RX Oveflow Overwrite enable</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ZEN</name>
							<description>Transmit zeros when empty</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TIM</name>
							<description>Transfer and interrupt mode</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>RXRD</name>
									<value>0</value>
									<description>- Cleared by user to initiate transfer with a read of the SPIRX register</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>TXWR</name>
									<value>1</value>
									<description>- Set by user to initiate transfer with a write to the SPITX register.</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>LSB</name>
							<description>LSB First Transfer enable</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WOM</name>
							<description>Wired OR enable</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CPOL</name>
							<description>Clock polarity mode</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CPHA</name>
							<description>Clock phase mode</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SAMPLELEADING</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SAMPLETRAILING</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MASEN</name>
							<description>Master enable</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>SPI Enable bit</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI1DMA</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>DMA enable register</description>
					<fields>
						<field>
							<name>IENRXDMA</name>
							<description>Enable receive DMA request</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IENTXDMA</name>
							<description>Enable transmit DMA request</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Enable DMA for data transfer</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>SPI1CNT</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>8-bit received byte count register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Count</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_UART</name>
			<description>UART</description>
			<groupName>UART</groupName>
			<baseAddress>0x40005000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x34</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>COMTX</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000008</size>
					<description>Transmit Holding register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>COMRX</name>
					<alternateRegister>COMTX</alternateRegister>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000008</size>
					<description>Receive Buffer register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>COMIEN</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>Interrupt Enable register</description>
					<fields>
						<field>
							<name>EDMAR</name>
							<description>Enable DMA requests in transmit mode</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EDMAT</name>
							<description>Enable DMA requests in receive mode</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EDSSI</name>
							<description>Enable Modem Status interrupt</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ELSI</name>
							<description>Enable Rx status interrupt</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ETBEI</name>
							<description>Enable transmit buffer empty interrupt</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ERBFI</name>
							<description>Enable receive buffer full interrupt</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>COMIIR</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000008</size>
					<description>Interrupt Identification register</description>
					<fields>
						<field>
							<name>STA</name>
							<description>Status bits.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>MODEMSTATUS</name>
									<value>0</value>
									<description>- Modem status interrupt.</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>TXBUFEMPTY</name>
									<value>1</value>
									<description>- Transmit buffer empty interrupt.</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>RXBUFFULL</name>
									<value>2</value>
									<description>- Receive buffer full interrupt. Read RBR register to clear.</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>RXLINESTATUS</name>
									<value>3</value>
									<description>- Receive line status interrupt. Read LSR register to clear.</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>NINT</name>
							<description>Interrupt flag.</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>COMLCR</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000008</size>
					<description>Line Control register</description>
					<fields>
						<field>
							<name>BRK</name>
							<description>Set Break.</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SP</name>
							<description>Stick Parity.</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EPS</name>
							<description>Even Parity Select Bit.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PEN</name>
							<description>Parity Enable Bit.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STOP</name>
							<description>Stop Bit.</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>WLS</name>
							<description>Word Length Select bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>5BITS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>6BITS</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>7BITS</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>8BITS</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>COMMCR</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000008</size>
					<description>Module Control register</description>
					<fields>
						<field>
							<name>LOOPBACK</name>
							<description>Loop Back.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT1</name>
							<description>Parity Enable Bit.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT2</name>
							<description>Stop Bit.</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RTS</name>
							<description>Request To Send.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DTR</name>
							<description>Data Terminal Ready.</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>COMLSR</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000008</size>
					<description>Line Status register</description>
					<fields>
						<field>
							<name>TEMT</name>
							<description>COMTX and Shift Register Empty Status Bit.</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>THRE</name>
							<description>COMTX Empty Status Bit.</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BI</name>
							<description>Break Indicator.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>FE</name>
							<description>Framing Error.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PE</name>
							<description>Parity Error.</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OE</name>
							<description>Overrun Error.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DR</name>
							<description>Data Ready.</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>COMMSR</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000008</size>
					<description>Modem Status register</description>
					<fields>
						<field>
							<name>DCD</name>
							<description>Data Carrier Detect.</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RI</name>
							<description>Ring Indicator.</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DSR</name>
							<description>Data Set Ready.</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CTS</name>
							<description>Clear To Send.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DDCD</name>
							<description>Delta DCD.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TERI</name>
							<description>Trailing Edge RI.</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DDSR</name>
							<description>Delta DSR.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DCTS</name>
							<description>Delta CTS.</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>COMFBR</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000010</size>
					<description>Fractional baud rate divider register.</description>
					<fields>
						<field>
							<name>ENABLE</name>
							<description>Enable</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DIVM</name>
							<description>Fractional M Divide bits</description>
							<bitOffset>11</bitOffset>
							<bitWidth>2</bitWidth>
						</field>
						<field>
							<name>DIVN</name>
							<description>Fractional N Divide bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>11</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>COMDIV</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000010</size>
					<description>Baud rate Divisor register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Sets the baudrate</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>COMCON</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000008</size>
					<description>UART control register</description>
					<fields>
						<field>
							<name>DISABLE</name>
							<description>Uart Disable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_GPIO0</name>
			<description>General Purpose Input Output</description>
			<groupName>GPIO0</groupName>
			<baseAddress>0x40006000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x28</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>GP0CON</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>GPIO Port 0 configuration</description>
					<fields>
						<field>
							<name>CON7</name>
							<description>Configuration bits for P0.7</description>
							<bitOffset>14</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>PORB</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>GPIO</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UARTTXD</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON6</name>
							<description>Configuration bits for P0.6</description>
							<bitOffset>12</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ2</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UARTRXD</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON5</name>
							<description>Configuration bits for P0.5</description>
							<bitOffset>10</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UARTCTS</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON4</name>
							<description>Configuration bits for P0.4</description>
							<bitOffset>8</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UARTRTS</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ECLKOUT</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON3</name>
							<description>Configuration bits for P0.3</description>
							<bitOffset>6</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ0</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI1CS0</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON2</name>
							<description>Configuration bits for P0.2</description>
							<bitOffset>4</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI1MOSI</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>I2CSDA</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UARTTXD</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON1</name>
							<description>Configuration bits for P0.1</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI1SCLK</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>I2CSCL</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UARTRXD</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON0</name>
							<description>Configuration bits for P0.0</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI1MISO</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0OEN</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 output enable</description>
					<fields>
						<field>
							<name>OEN7</name>
							<description>Direction for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN6</name>
							<description>Direction for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN5</name>
							<description>Direction for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN4</name>
							<description>Direction for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN3</name>
							<description>Direction for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN2</name>
							<description>Direction for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN1</name>
							<description>Direction for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN0</name>
							<description>Direction for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0PUL</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 output pull up enable.</description>
					<fields>
						<field>
							<name>PUL7</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL6</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL5</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL4</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL3</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL2</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL1</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL0</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0OCE</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 tri state</description>
					<fields>
						<field>
							<name>OCE7</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE6</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE5</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE4</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE3</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE2</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE1</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE0</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0IN</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 data input.</description>
					<fields>
						<field>
							<name>IN7</name>
							<description>Input for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN6</name>
							<description>Input for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN5</name>
							<description>Input for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN4</name>
							<description>Input for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN3</name>
							<description>Input for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN2</name>
							<description>Input for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN1</name>
							<description>Input for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN0</name>
							<description>Input for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0OUT</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 data out.</description>
					<fields>
						<field>
							<name>OUT7</name>
							<description>Output for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT6</name>
							<description>Output for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT5</name>
							<description>Output for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT4</name>
							<description>Output for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT3</name>
							<description>Output for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT2</name>
							<description>Output for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT1</name>
							<description>Output for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT0</name>
							<description>Output for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0SET</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 data out set</description>
					<fields>
						<field>
							<name>SET7</name>
							<description>Set Output High for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET6</name>
							<description>Set Output High for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET5</name>
							<description>Set Output High for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET4</name>
							<description>Set Output High for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET3</name>
							<description>Set Output High for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET2</name>
							<description>Set Output High for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET1</name>
							<description>Set Output High for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET0</name>
							<description>Set Output High for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0CLR</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 data out clear.</description>
					<fields>
						<field>
							<name>CLR7</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR6</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR5</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR4</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR3</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR2</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR1</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR0</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP0TGL</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 0 pin toggle.</description>
					<fields>
						<field>
							<name>TGL7</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL6</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL5</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL4</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL3</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL2</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL1</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL0</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_GPIO1</name>
			<description>General Purpose Input Output</description>
			<groupName>GPIO1</groupName>
			<baseAddress>0x40006030</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x28</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>GP1CON</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>GPIO Port 1 configuration</description>
					<fields>
						<field>
							<name>CON7</name>
							<description>Configuration bits for P1.7</description>
							<bitOffset>14</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ7</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM5</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI0CS</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON6</name>
							<description>Configuration bits for P1.6</description>
							<bitOffset>12</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ6</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM4</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI0MOSI</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON5</name>
							<description>Configuration bits for P1.5</description>
							<bitOffset>10</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ5</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM3</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI0SCLK</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON4</name>
							<description>Configuration bits for P1.4</description>
							<bitOffset>8</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SPI0MISO</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON3</name>
							<description>Configuration bits for P1.3</description>
							<bitOffset>6</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM1</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON2</name>
							<description>Configuration bits for P1.2</description>
							<bitOffset>4</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWM0</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON1</name>
							<description>Configuration bits for P1.1</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ4</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWMTRIP</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON0</name>
							<description>Configuration bits for P1.0</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIOIRQ3</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>PWMSYNC</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXTCLKIN</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1OEN</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 output enable</description>
					<fields>
						<field>
							<name>OEN7</name>
							<description>Direction for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN6</name>
							<description>Direction for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN5</name>
							<description>Direction for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN4</name>
							<description>Direction for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN3</name>
							<description>Direction for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN2</name>
							<description>Direction for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN1</name>
							<description>Direction for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN0</name>
							<description>Direction for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1PUL</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 output pull up enable.</description>
					<fields>
						<field>
							<name>PUL7</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL6</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL5</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL4</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL3</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL2</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL1</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL0</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1OCE</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 tri state</description>
					<fields>
						<field>
							<name>OCE7</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE6</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE5</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE4</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE3</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE2</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE1</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE0</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1IN</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 data input.</description>
					<fields>
						<field>
							<name>IN7</name>
							<description>Input for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN6</name>
							<description>Input for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN5</name>
							<description>Input for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN4</name>
							<description>Input for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN3</name>
							<description>Input for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN2</name>
							<description>Input for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN1</name>
							<description>Input for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN0</name>
							<description>Input for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1OUT</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 data out.</description>
					<fields>
						<field>
							<name>OUT7</name>
							<description>Output for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT6</name>
							<description>Output for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT5</name>
							<description>Output for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT4</name>
							<description>Output for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT3</name>
							<description>Output for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT2</name>
							<description>Output for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT1</name>
							<description>Output for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT0</name>
							<description>Output for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1SET</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 data out set</description>
					<fields>
						<field>
							<name>SET7</name>
							<description>Set Output High for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET6</name>
							<description>Set Output High for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET5</name>
							<description>Set Output High for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET4</name>
							<description>Set Output High for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET3</name>
							<description>Set Output High for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET2</name>
							<description>Set Output High for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET1</name>
							<description>Set Output High for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET0</name>
							<description>Set Output High for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1CLR</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 data out clear.</description>
					<fields>
						<field>
							<name>CLR7</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR6</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR5</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR4</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR3</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR2</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR1</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR0</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP1TGL</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 1 pin toggle.</description>
					<fields>
						<field>
							<name>TGL7</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL6</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL5</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL4</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL3</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL2</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL1</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL0</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_GPIO2</name>
			<description>General Purpose Input Output</description>
			<groupName>GPIO2</groupName>
			<baseAddress>0x40006060</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x28</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>GP2CON</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>GPIO Port 2 configuration</description>
					<fields>
						<field>
							<name>CON4</name>
							<description>Configuration bits for P2.4</description>
							<bitOffset>8</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SWDATA</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON3</name>
							<description>Configuration bits for P2.3</description>
							<bitOffset>6</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SWCLK</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON2</name>
							<description>Configuration bits for P2.2</description>
							<bitOffset>4</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON1</name>
							<description>Configuration bits for P2.1</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>I2CSDA</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CON0</name>
							<description>Configuration bits for P2.0</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>GPIO</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>I2CSCL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2OEN</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 output enable</description>
					<fields>
						<field>
							<name>OEN7</name>
							<description>Direction for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN6</name>
							<description>Direction for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN5</name>
							<description>Direction for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN4</name>
							<description>Direction for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN3</name>
							<description>Direction for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN2</name>
							<description>Direction for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN1</name>
							<description>Direction for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OEN0</name>
							<description>Direction for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IN</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>OUT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2PUL</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 output pull up enable.</description>
					<fields>
						<field>
							<name>PUL7</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL6</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL5</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL4</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL3</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL2</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL1</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PUL0</name>
							<description>Pull Up Enable for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2OCE</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 tri state</description>
					<fields>
						<field>
							<name>OCE7</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE6</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE5</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE4</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE3</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE2</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE1</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OCE0</name>
							<description>open circuit Enable for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2IN</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 data input.</description>
					<fields>
						<field>
							<name>IN7</name>
							<description>Input for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN6</name>
							<description>Input for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN5</name>
							<description>Input for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN4</name>
							<description>Input for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN3</name>
							<description>Input for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN2</name>
							<description>Input for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN1</name>
							<description>Input for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IN0</name>
							<description>Input for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2OUT</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 data out.</description>
					<fields>
						<field>
							<name>OUT7</name>
							<description>Output for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT6</name>
							<description>Output for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT5</name>
							<description>Output for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT4</name>
							<description>Output for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT3</name>
							<description>Output for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT2</name>
							<description>Output for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT1</name>
							<description>Output for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OUT0</name>
							<description>Output for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>LOW</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>HIGH</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2SET</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 data out set</description>
					<fields>
						<field>
							<name>SET7</name>
							<description>Set Output High for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET6</name>
							<description>Set Output High for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET5</name>
							<description>Set Output High for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET4</name>
							<description>Set Output High for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET3</name>
							<description>Set Output High for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET2</name>
							<description>Set Output High for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET1</name>
							<description>Set Output High for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SET0</name>
							<description>Set Output High for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2CLR</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 data out clear.</description>
					<fields>
						<field>
							<name>CLR7</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR6</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR5</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR4</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR3</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR2</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR1</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR0</name>
							<description>Set Output Low for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>GP2TGL</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000008</size>
					<description>GPIO Port 2 pin toggle.</description>
					<fields>
						<field>
							<name>TGL7</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL6</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL5</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL4</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL3</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL2</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL1</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>TGL0</name>
							<description>Toggle Output for port pin</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>TGL</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_ANA</name>
			<description>Analog Control</description>
			<groupName>ANA</groupName>
			<baseAddress>0x40008810</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x78</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>REFCTRL</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000010</size>
					<description>Internal Reference Control register</description>
					<fields>
						<field>
							<name>REFPD</name>
							<description>Power down reference</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>IEXCCON</name>
					<addressOffset>0x00000040</addressOffset>
					<size>0x00000008</size>
					<description>Controls the on-chip Excitation Current Sources</description>
					<fields>
						<field>
							<name>PD</name>
							<description>IEXC Power down- bits</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>En</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>off</name>
									<value>0</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>REFSEL</name>
							<description>IREF Source- bits</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Ext</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>Int</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IPSEL1</name>
							<description>Select IEXC1 pin AIN- bits</description>
							<bitOffset>3</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN4</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN5</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN6</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IPSEL0</name>
							<description>Select IEXC0 pin AIN- bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN4</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN5</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN6</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>IEXCDAT</name>
					<addressOffset>0x00000044</addressOffset>
					<size>0x00000008</size>
					<description>Sets the output current setting for both Excitation Current sources</description>
					<fields>
						<field>
							<name>IDAT</name>
							<description>Output Current- bits</description>
							<bitOffset>1</bitOffset>
							<bitWidth>5</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>0uA</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>50uA</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>100uA</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>150uA</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>200uA</name>
									<value>7</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>250uA</name>
									<value>20</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>300uA</name>
									<value>10</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>400uA</name>
									<value>11</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>450uA</name>
									<value>14</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>500uA</name>
									<value>21</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>600uA</name>
									<value>15</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>750uA</name>
									<value>22</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>800uA</name>
									<value>19</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>1mA</name>
									<value>31</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>IDAT0</name>
							<description>10uA Enable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_DMA</name>
			<description>Direct Memory Access</description>
			<groupName>DMA</groupName>
			<baseAddress>0x40010000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x1000</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>DMA_ERR</name>
				<value>22</value>
			</interrupt>
			<interrupt>
				<name>DMA_SPI1_TX</name>
				<value>23</value>
			</interrupt>
			<interrupt>
				<name>DMA_SPI1_RX</name>
				<value>24</value>
			</interrupt>
			<interrupt>
				<name>DMA_UART_TX</name>
				<value>25</value>
			</interrupt>
			<interrupt>
				<name>DMA_UART_RX</name>
				<value>26</value>
			</interrupt>
			<interrupt>
				<name>DMA_I2CS_TX</name>
				<value>27</value>
			</interrupt>
			<interrupt>
				<name>DMA_I2CS_RX</name>
				<value>28</value>
			</interrupt>
			<interrupt>
				<name>DMA_I2CM_TX</name>
				<value>29</value>
			</interrupt>
			<interrupt>
				<name>DMA_I2CM_RX</name>
				<value>30</value>
			</interrupt>
			<interrupt>
				<name>DMA_DAC</name>
				<value>31</value>
			</interrupt>
			<interrupt>
				<name>DMA_ADC0</name>
				<value>32</value>
			</interrupt>
			<interrupt>
				<name>DMA_ADC1</name>
				<value>33</value>
			</interrupt>
			<interrupt>
				<name>DMA_SINC2</name>
				<value>34</value>
			</interrupt>
			<registers>
				<register>
					<name>DMASTA</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000020</size>
					<description>Returns the status of the controller when not in the reset state.</description>
					<fields>
						<field>
							<name>CHNLSMINUS1</name>
							<description>Number of available DMA channels minus one.</description>
							<bitOffset>16</bitOffset>
							<bitWidth>5</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>FOURTEENCHNLS</name>
									<value>13</value>
									<description>- Controller configured to use 14 DMA channels</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>TWELVECHNLS</name>
									<value>11</value>
									<description>- Controller configured to use 12 DMA channels</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STATE</name>
							<description>Current state of the control state machine.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>4</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IDLE</name>
									<value>0</value>
									<description>- Idle</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>RDCHNLDATA</name>
									<value>1</value>
									<description>- Reading channel controller data</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>RDSRCENDPTR</name>
									<value>2</value>
									<description>- Reading source data end pointer</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>RDDSTENDPTR</name>
									<value>3</value>
									<description>- Reading destination data end pointer</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>RDSRCDATA</name>
									<value>4</value>
									<description>- Reading source data</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>WRDSTDATA</name>
									<value>5</value>
									<description>- Writing destination data</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>WAITDMAREQCLR</name>
									<value>6</value>
									<description>- Waiting for DMA request to clear</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>WRCHNLDATA</name>
									<value>7</value>
									<description>- Writing channel controller data</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>STALLED</name>
									<value>8</value>
									<description>- Stalled</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>DONE</name>
									<value>9</value>
									<description>- Done</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>SCATRGATHR</name>
									<value>10</value>
									<description>- Peripheral scatter-gather transition</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ENABLE</name>
							<description>Master DMA controller enable status.</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>CLR</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SET</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMACFG</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000020</size>
					<description>Configuraton</description>
					<fields>
						<field>
							<name>ENABLE</name>
							<description>Master DMA controller enable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPDBPTR</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000020</size>
					<description>Channel primary control database pointer</description>
					<fields>
						<field>
							<name>CTRLBASEPTR</name>
							<description>Pointer to the base address of the primary data structure</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAADBPTR</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000020</size>
					<description>Channel alt control database pointer</description>
					<fields>
						<field>
							<name>ALTCBPTR</name>
							<description>Pointer to the base address of the alternate data structure</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMASWREQ</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000020</size>
					<description>Channel Software Request</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMARMSKSET</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000020</size>
					<description>Channel Request Mask Set</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMARMSKCLR</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000020</size>
					<description>Channel Request Mask Clear</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAENSET</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000020</size>
					<description>Channel Enable Set</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAENCLR</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000020</size>
					<description>Channel Enable Clear</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAALTSET</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000020</size>
					<description>Channel Primary-Alternate Set</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAALTCLR</name>
					<addressOffset>0x00000034</addressOffset>
					<size>0x00000020</size>
					<description>Channel Primary-Alternate Clear</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPRISET</name>
					<addressOffset>0x00000038</addressOffset>
					<size>0x00000020</size>
					<description>Channel Priority Set</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPRICLR</name>
					<addressOffset>0x0000003C</addressOffset>
					<size>0x00000020</size>
					<description>Channel Priority Clear</description>
					<fields>
						<field>
							<name>SINC2</name>
							<description>SINC2 Output Step detection</description>
							<bitOffset>11</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1</name>
							<description>ADC1</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0</name>
							<description>ADC0</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DAC</name>
							<description>DAC DMA Output</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMRX</name>
							<description>DMA I2C Master RX</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CMTX</name>
							<description>DMA I2C Master TX</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSRX</name>
							<description>DMA I2C Slave RX</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>I2CSTX</name>
							<description>DMA I2C Slave TX</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTRX</name>
							<description>DMA UART RX</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>UARTTX</name>
							<description>DMA UART TX</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1RX</name>
							<description>DMA SPI 1 RX</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SPI1TX</name>
							<description>DMA SPI 1 TX</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAERRCLR</name>
					<addressOffset>0x0000004C</addressOffset>
					<size>0x00000020</size>
					<description>Bus Error Clear</description>
					<fields>
						<field>
							<name>ERROR</name>
							<description>DMA Error status</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPERID4</name>
					<addressOffset>0x00000FD0</addressOffset>
					<size>0x00000008</size>
					<description>Peripheral identification 4</description>
					<fields>
						<field>
							<name>BLOCKCOUNT</name>
							<description>The number of 4KB address blocks you require, to access the registers, expressed in powers of 2.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
						<field>
							<name>JEP106CCODE</name>
							<description>The JEP106 continuation code value represents how many 0x7F continuation characters occur in the manufacturer?s identity code.</description>
							<bitOffset>0</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPERID0</name>
					<addressOffset>0x00000FE0</addressOffset>
					<size>0x00000008</size>
					<description>Peripheral identification 0</description>
					<fields>
						<field>
							<name>PARTNO0</name>
							<description>Identifies the peripheral (part_number_0)</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPERID1</name>
					<addressOffset>0x00000FE4</addressOffset>
					<size>0x00000008</size>
					<description>Peripheral identification 1</description>
					<fields>
						<field>
							<name>JEP106ID0</name>
							<description>JEP106 identity code [3:0]</description>
							<bitOffset>4</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
						<field>
							<name>PARTNO1</name>
							<description>Identifies the peripheral (part_number_1)</description>
							<bitOffset>0</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPERID2</name>
					<addressOffset>0x00000FE8</addressOffset>
					<size>0x00000008</size>
					<description>Peripheral identification 2</description>
					<fields>
						<field>
							<name>REVISION</name>
							<description>The revision status of the controller.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
						<field>
							<name>JEDECUSED</name>
							<description>This indicates that the controller uses a manufacturer?s identity code that was allocated by JEDEC according to JEP106.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>JEP106ID1</name>
							<description>JEP106 identity code [6:4].</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPERID3</name>
					<addressOffset>0x00000FEC</addressOffset>
					<size>0x00000008</size>
					<description>Peripheral identification 3</description>
					<fields>
						<field>
							<name>MODNUM</name>
							<description>The customer must update this field if they modify the RTL of the controller.</description>
							<bitOffset>0</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPCELLID0</name>
					<addressOffset>0x00000FF0</addressOffset>
					<size>0x00000008</size>
					<description>PrimeCell identification 0</description>
					<fields>
						<field>
							<name>PCELLID0</name>
							<description>Primecell Identification</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPCELLID1</name>
					<addressOffset>0x00000FF4</addressOffset>
					<size>0x00000008</size>
					<description>PrimeCell identification 1</description>
					<fields>
						<field>
							<name>PCELLID1</name>
							<description>Primecell Identification</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPCELLID2</name>
					<addressOffset>0x00000FF8</addressOffset>
					<size>0x00000008</size>
					<description>PrimeCell identification 2</description>
					<fields>
						<field>
							<name>PCELLID2</name>
							<description>Primecell Identification</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DMAPCELLID3</name>
					<addressOffset>0x00000FFC</addressOffset>
					<size>0x00000008</size>
					<description>PrimeCell identification 3</description>
					<fields>
						<field>
							<name>PCELLID3</name>
							<description>Primecell Identification</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_ADC0</name>
			<description>Analog to Digital Converter</description>
			<groupName>ADC0</groupName>
			<baseAddress>0x40030000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x4C</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>ADC0</name>
				<value>13</value>
			</interrupt>
			<registers>
				<register>
					<name>ADC0STA</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000008</size>
					<description>ADC Status register</description>
					<fields>
						<field>
							<name>CAL</name>
							<description>ADC Calibration status register</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ERR</name>
							<description>ADC conversion error status bit.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ATHEX</name>
							<description>ADC Accumulator Comparator Threshold status bit.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>THEX</name>
							<description>ADC comparator threshold.</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OVR</name>
							<description>ADC overrange bit.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RDY</name>
							<description>valid conversion result</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0MSKI</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>Interrupt control register</description>
					<fields>
						<field>
							<name>ATHEX</name>
							<description>ADC Accumulator Comparator Threshold status bit mask</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>THEX</name>
							<description>ADC comparator threshold mask</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OVR</name>
							<description>ADC overrange bit mask.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RDY</name>
							<description>valid conversion result mask</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0CON</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000020</size>
					<description>Main control register</description>
					<fields>
						<field>
							<name>ADCEN</name>
							<description>Enable Bit</description>
							<bitOffset>19</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCCODE</name>
							<description>ADC Output Coding bits</description>
							<bitOffset>18</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>INT</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UINT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFPOWN</name>
							<description>Negative buffer power down</description>
							<bitOffset>17</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
									<description>Disable powerdown - Negative buffer is enabled</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
									<description>Enable powerdown - Negative buffer is disabled</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFPOWP</name>
							<description>Positive buffer power down</description>
							<bitOffset>16</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
									<description>Disable powerdown - Positive buffer is enabled</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
									<description>Enable powerdown - Positive buffer is disabled</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFBYPP</name>
							<description>Positive buffer bypass</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFBYPN</name>
							<description>Negative buffer bypass</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCREF</name>
							<description>Reference selection</description>
							<bitOffset>12</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>INTREF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXTREF</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXTREF2</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AVDDREF</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCDIAG</name>
							<description>Diagnostic Current bits bits</description>
							<bitOffset>10</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIAG_OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIAG_POS</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIAG_NEG</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIAG_ALL</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCCP</name>
							<description>AIN+ bits</description>
							<bitOffset>5</bitOffset>
							<bitWidth>5</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>AIN0</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN1</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN2</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN3</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN4</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN5</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN6</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>7</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN8</name>
									<value>8</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN9</name>
									<value>9</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN10</name>
									<value>10</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN11</name>
									<value>11</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DAC</name>
									<value>12</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AVDD4</name>
									<value>13</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>IOVDD4</name>
									<value>14</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AGND</name>
									<value>15</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TEMP</name>
									<value>16</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCCN</name>
							<description>AIN- bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>5</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>AIN0</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN1</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN2</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN3</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN4</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN5</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN6</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>7</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN8</name>
									<value>8</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN9</name>
									<value>9</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN10</name>
									<value>10</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN11</name>
									<value>11</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DAC</name>
									<value>12</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AGND</name>
									<value>15</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TEMP</name>
									<value>17</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0OF</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>Offset calibration register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Offset</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0INTGN</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Gain calibration register when using internal reference</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Gain with Int Ref</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0EXTGN</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>Gain calibration register when using external reference</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Gain with Ext Ref</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0VDDGN</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>Gain calibration register when using AVDD as the ADC reference</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Gain with Avdd Ref</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADCCFG</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000010</size>
					<description>"Control register for the VBIAS voltage generator, ground switch and external reference buffer"</description>
					<fields>
						<field>
							<name>SIMU</name>
							<description>Enable both ADCs</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BOOST30</name>
							<description>Boost the Vbias current source ability by 30 times</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PINSEL</name>
							<description>Enable vbias generator, send vbias to selected ain pin bits</description>
							<bitOffset>8</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
									<description>Disable VBIAS generator</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN11</name>
									<value>6</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GNDSWON</name>
							<description>GND_SW</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GNDSWRESEN</name>
							<description>20k resistor in series with GND_SW</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTBUF</name>
							<description>Control signals for ext_ref buffers bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>VREFPN</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>VREFP_VREF2P</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0FLT</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000010</size>
					<description>Filter configuration register</description>
					<fields>
						<field>
							<name>CHOP</name>
							<description>Enables System-Chopping bits</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ON</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RAVG2</name>
							<description>Enables a running Average-By-2 bits</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ON</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SINC4EN</name>
							<description>Enable the Sinc4 filter instead of Sinc3 filter.</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>AF</name>
							<description>Averaging filter</description>
							<bitOffset>8</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
						<field>
							<name>NOTCH2</name>
							<description>Inserts a notch at FNOTCH2</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SF</name>
							<description>SINC Filter value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>7</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0MDE</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000010</size>
					<description>mode control register</description>
					<fields>
						<field>
							<name>PGA</name>
							<description>PGA Gain Select bit</description>
							<bitOffset>4</bitOffset>
							<bitWidth>4</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>G1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCMOD2</name>
							<description>ADC modulator gain of 2 control bits</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>MOD2OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>MOD2ON</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCMD</name>
							<description>ADC Mode bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>CONT</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SINGLE</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>IDLE</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>INTOCAL</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>INTGCAL</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SYSOCAL</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SYSGCAL</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0RCR</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000010</size>
					<description>Number of ADC0 conversions before an ADC interrupt is generated.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0RCV</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000010</size>
					<description>"This 16-bit, read-only MMR holds the current number of ADC0 conversion results"</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0TH</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000010</size>
					<description>Sets the threshold</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0THC</name>
					<addressOffset>0x00000034</addressOffset>
					<size>0x00000008</size>
					<description>Determines how many cumulative ADC0 conversion result readings above ADC0TH must occur</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0THV</name>
					<addressOffset>0x00000038</addressOffset>
					<size>0x00000008</size>
					<description>8-bit threshold exceeded counter register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0ACC</name>
					<addressOffset>0x0000003C</addressOffset>
					<size>0x00000020</size>
					<description>32-bit accumulator register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0ATH</name>
					<addressOffset>0x00000040</addressOffset>
					<size>0x00000020</size>
					<description>Holds the threshold value for the accumulator comparator</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0PRO</name>
					<addressOffset>0x00000044</addressOffset>
					<size>0x00000008</size>
					<description>Configuration register for Post processing of ADC0 results</description>
					<fields>
						<field>
							<name>ACCEN</name>
							<description>ADC Accumulator Enable bits</description>
							<bitOffset>4</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>En</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnNDec</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnAccCnt</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CMPEN</name>
							<description>ADC Comparator Enable bits</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>En</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnCnt</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnCntDec</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OREN</name>
							<description>ADC OverRange Enable</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RCEN</name>
							<description>ADC Result Counter Enable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC0DAT</name>
					<addressOffset>0x00000048</addressOffset>
					<size>0x00000020</size>
					<description>conversion result register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_ADC1</name>
			<description>Analog to Digital Converter</description>
			<groupName>ADC1</groupName>
			<baseAddress>0x40030080</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x60</size>
				<usage>registers</usage>
			</addressBlock>
			<interrupt>
				<name>ADC1</name>
				<value>14</value>
			</interrupt>
			<registers>
				<register>
					<name>ADC1STA</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000008</size>
					<description>ADC Status register</description>
					<fields>
						<field>
							<name>CAL</name>
							<description>ADC Calibration status register</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ERR</name>
							<description>ADC conversion error status bit.</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ATHEX</name>
							<description>ADC Accumulator Comparator Threshold status bit.</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>THEX</name>
							<description>ADC comparator threshold.</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OVR</name>
							<description>ADC overrange bit.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RDY</name>
							<description>valid conversion result</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1MSKI</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>Interrupt control register</description>
					<fields>
						<field>
							<name>ATHEX</name>
							<description>ADC Accumulator Comparator Threshold status bit mask</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>THEX</name>
							<description>ADC comparator threshold mask</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OVR</name>
							<description>ADC overrange bit mask.</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RDY</name>
							<description>valid conversion result mask</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1CON</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000020</size>
					<description>Main control register</description>
					<fields>
						<field>
							<name>ADCEN</name>
							<description>Enable Bit</description>
							<bitOffset>19</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCCODE</name>
							<description>ADC Output Coding bits</description>
							<bitOffset>18</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>INT</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>UINT</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFPOWN</name>
							<description>Negative buffer power down</description>
							<bitOffset>17</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
									<description>Disable powerdown - Negative buffer is enabled</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
									<description>Enable powerdown - Negative buffer is disabled</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFPOWP</name>
							<description>Positive buffer power down</description>
							<bitOffset>16</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
									<description>Disable powerdown - Positive buffer is enabled</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
									<description>Enable powerdown - Positive buffer is disabled</description>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFBYPP</name>
							<description>Positive buffer bypass</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFBYPN</name>
							<description>Negative buffer bypass</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCREF</name>
							<description>Reference selection</description>
							<bitOffset>12</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>INTREF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXTREF</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EXTREF2</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AVDDREF</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCDIAG</name>
							<description>Diagnostic Current bits bits</description>
							<bitOffset>10</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIAG_OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIAG_POS</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIAG_NEG</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DIAG_ALL</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCCP</name>
							<description>AIN+ bits</description>
							<bitOffset>5</bitOffset>
							<bitWidth>5</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>AIN0</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN1</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN2</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN3</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN4</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN5</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN6</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>7</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN8</name>
									<value>8</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN9</name>
									<value>9</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN10</name>
									<value>10</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN11</name>
									<value>11</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DAC</name>
									<value>12</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AVDD4</name>
									<value>13</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>IOVDD4</name>
									<value>14</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AGND</name>
									<value>15</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TEMP</name>
									<value>16</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCCN</name>
							<description>AIN- bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>5</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>AIN0</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN1</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN2</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN3</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN4</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN5</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN6</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>7</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN8</name>
									<value>8</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN9</name>
									<value>9</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN10</name>
									<value>10</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN11</name>
									<value>11</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>DAC</name>
									<value>12</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AGND</name>
									<value>15</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>TEMP</name>
									<value>17</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1OF</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000010</size>
					<description>Offset calibration register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Offset</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1INTGN</name>
					<addressOffset>0x00000010</addressOffset>
					<size>0x00000010</size>
					<description>Gain calibration register when using internal reference</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Gain with Int Ref</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1EXTGN</name>
					<addressOffset>0x00000014</addressOffset>
					<size>0x00000010</size>
					<description>Gain calibration register when using external reference</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Gain with Ext Ref</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1VDDGN</name>
					<addressOffset>0x00000018</addressOffset>
					<size>0x00000010</size>
					<description>Gain calibration register when using AVDD as the ADC reference</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Gain with Avdd Ref</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADCSCFG1</name>
					<addressOffset>0x0000001C</addressOffset>
					<size>0x00000010</size>
					<description>"Control register for the VBIAS voltage generator, ground switch and external reference buffer"</description>
					<fields>
						<field>
							<name>SIMU</name>
							<description>Enable both ADCs</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BOOST30</name>
							<description>Boost the Vbias current source ability by 30 times</description>
							<bitOffset>13</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PINSEL</name>
							<description>Enable vbias generator, send vbias to selected ain pin bits</description>
							<bitOffset>8</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
									<description>Disable VBIAS generator</description>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN7</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AIN11</name>
									<value>6</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GNDSWON</name>
							<description>GND_SW</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>GNDSWRESEN</name>
							<description>20k resistor in series with GND_SW</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>EXTBUF</name>
							<description>Control signals for ext_ref buffers bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>VREFPN</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>VREFP_VREF2P</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1FLT</name>
					<addressOffset>0x00000020</addressOffset>
					<size>0x00000010</size>
					<description>Filter configuration register</description>
					<fields>
						<field>
							<name>CHOP</name>
							<description>Enables System-Chopping bits</description>
							<bitOffset>15</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ON</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RAVG2</name>
							<description>Enables a running Average-By-2 bits</description>
							<bitOffset>14</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>ON</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SINC4EN</name>
							<description>Enable the Sinc4 filter instead of Sinc3 filter.</description>
							<bitOffset>12</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>AF</name>
							<description>Averaging filter</description>
							<bitOffset>8</bitOffset>
							<bitWidth>4</bitWidth>
						</field>
						<field>
							<name>NOTCH2</name>
							<description>Inserts a notch at FNOTCH2</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SF</name>
							<description>SINC Filter value</description>
							<bitOffset>0</bitOffset>
							<bitWidth>7</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1MDE</name>
					<addressOffset>0x00000024</addressOffset>
					<size>0x00000010</size>
					<description>mode control register</description>
					<fields>
						<field>
							<name>PGA</name>
							<description>PGA Gain Select bit</description>
							<bitOffset>4</bitOffset>
							<bitWidth>4</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>G1</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G2</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G4</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G8</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G16</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G32</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G64</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>G128</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCMOD2</name>
							<description>ADC modulator gain of 2 control bits</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>MOD2OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>MOD2ON</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCMD</name>
							<description>ADC Mode bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>3</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>OFF</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>CONT</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SINGLE</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>IDLE</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>INTOCAL</name>
									<value>4</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>INTGCAL</name>
									<value>5</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SYSOCAL</name>
									<value>6</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>SYSGCAL</name>
									<value>7</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1RCR</name>
					<addressOffset>0x00000028</addressOffset>
					<size>0x00000010</size>
					<description>Number of ADC1 conversions before an ADC interrupt is generated.</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1RCV</name>
					<addressOffset>0x0000002C</addressOffset>
					<size>0x00000010</size>
					<description>"This 16-bit, read-only MMR holds the current number of ADC1 conversion results"</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1TH</name>
					<addressOffset>0x00000030</addressOffset>
					<size>0x00000010</size>
					<description>Sets the threshold</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>16</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1THC</name>
					<addressOffset>0x00000034</addressOffset>
					<size>0x00000008</size>
					<description>Determines how many cumulative ADC1 conversion result readings above ADC1TH must occur</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1THV</name>
					<addressOffset>0x00000038</addressOffset>
					<size>0x00000008</size>
					<description>8-bit threshold exceeded counter register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>8</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1ACC</name>
					<addressOffset>0x0000003C</addressOffset>
					<size>0x00000020</size>
					<description>32-bit accumulator register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1ATH</name>
					<addressOffset>0x00000040</addressOffset>
					<size>0x00000020</size>
					<description>Holds the threshold value for the accumulator comparator</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1PRO</name>
					<addressOffset>0x00000044</addressOffset>
					<size>0x00000008</size>
					<description>Configuration register for Post processing of ADC1 results</description>
					<fields>
						<field>
							<name>ACCEN</name>
							<description>ADC Accumulator Enable bits</description>
							<bitOffset>4</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>En</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnNDec</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnAccCnt</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CMPEN</name>
							<description>ADC Comparator Enable bits</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>En</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnCnt</name>
									<value>2</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EnCntDec</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>OREN</name>
							<description>ADC OverRange Enable</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RCEN</name>
							<description>ADC Result Counter Enable</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>ADC1DAT</name>
					<addressOffset>0x00000048</addressOffset>
					<size>0x00000020</size>
					<description>conversion result register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_ADCSTEP</name>
			<description>Analog to Digital Converter</description>
			<groupName>ADCSTEP</groupName>
			<baseAddress>0x400300E0</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x10</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>DETCON</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Control register for reference detection and the step detection filter</description>
					<fields>
						<field>
							<name>REFDET</name>
							<description>Enable external reference detection circuit</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>SINC2</name>
							<description>Enable Sinc2 filter</description>
							<bitOffset>7</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STEPCTRL</name>
							<description>Control the method to generate the step flag</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADCSEL</name>
							<description>Select ADC</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RATE</name>
							<description>Control the sinc2 filter's time interval</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>DETSTA</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000008</size>
					<description>Status register for detection</description>
					<fields>
						<field>
							<name>REFSTA</name>
							<description>TBD</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>DATOF</name>
							<description>STEPDAT Overflow</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STEPERR</name>
							<description>TBD</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STEPFLAG</name>
							<description>TBD</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>STEPDATRDY</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>STEPTH</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>Threshold for step detection filter</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>9</bitWidth>
						</field>
					</fields>
				</register>
				<register>
					<name>STEPDAT</name>
					<addressOffset>0x0000000C</addressOffset>
					<size>0x00000020</size>
					<description>Offers coarse data from the output of the step detection filter</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>32</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_ADCDMA</name>
			<description>Analog to Digital Converter</description>
			<groupName>ADCDMA</groupName>
			<baseAddress>0x400300F0</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0xC</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>ADCDMACON</name>
					<addressOffset>0x00000008</addressOffset>
					<size>0x00000010</size>
					<description>ADC DMA mode Configuration register</description>
					<fields>
						<field>
							<name>SINC2DMAEN</name>
							<description>TBD</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1DMAEN</name>
							<description>TBD</description>
							<bitOffset>3</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC1CTRL</name>
							<description>TBD</description>
							<bitOffset>2</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0DMAEN</name>
							<description>TBD</description>
							<bitOffset>1</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>ADC0CTRL</name>
							<description>TBD</description>
							<bitOffset>0</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		<peripheral>
			<name>ADI_DAC</name>
			<description>Digital To Analog Converter</description>
			<groupName>DAC</groupName>
			<baseAddress>0x40020000</baseAddress>
			<addressBlock>
				<offset>0</offset>
				<size>0x5C</size>
				<usage>registers</usage>
			</addressBlock>
			<registers>
				<register>
					<name>DACCON</name>
					<addressOffset>0x00000000</addressOffset>
					<size>0x00000010</size>
					<description>Control Register</description>
					<fields>
						<field>
							<name>DMAEN</name>
							<description>bits</description>
							<bitOffset>10</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>On</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>PD</name>
							<description>TBD</description>
							<bitOffset>9</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>NPN</name>
							<description>TBD</description>
							<bitOffset>8</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>BUFBYP</name>
							<description>TBD</description>
							<bitOffset>6</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>DIS</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>EN</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLK</name>
							<description>bits</description>
							<bitOffset>5</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>HCLK</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>Timer1</name>
									<value>1</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>CLR</name>
							<description>bits</description>
							<bitOffset>4</bitOffset>
							<bitWidth>1</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>Off</name>
									<value>1</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>On</name>
									<value>0</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>MDE</name>
							<description>Mode bits</description>
							<bitOffset>2</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>12bit</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>16BitSlow</name>
									<value>3</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>16BitFast</name>
									<value>2</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
						<field>
							<name>RNG</name>
							<description>DAC Range bits</description>
							<bitOffset>0</bitOffset>
							<bitWidth>2</bitWidth>
							<enumeratedValues>
								<enumeratedValue>
									<name>IntVref</name>
									<value>0</value>
								</enumeratedValue>
								<enumeratedValue>
									<name>AVdd</name>
									<value>3</value>
								</enumeratedValue>
							</enumeratedValues>
						</field>
					</fields>
				</register>
				<register>
					<name>DACDAT</name>
					<addressOffset>0x00000004</addressOffset>
					<size>0x00000020</size>
					<description>Data Register</description>
					<fields>
						<field>
							<name>VALUE</name>
							<description>Data</description>
							<bitOffset>12</bitOffset>
							<bitWidth>20</bitWidth>
						</field>
					</fields>
				</register>
			</registers>
		</peripheral>
		->
	</peripherals>
</device>