From 55cc27bafd325def4e98098de83626582123515a Mon Sep 17 00:00:00 2001 From: marionbarker Date: Mon, 21 Oct 2024 17:01:14 -0700 Subject: [PATCH] remove loop-3- from figure names in loop-3/img folder, adjust links --- docs/browser/edit-browser.md | 2 +- docs/browser/phone-install.md | 2 +- docs/faqs/safety-faqs.md | 2 +- docs/faqs/time-faqs.md | 2 +- docs/loop-3/add-cgm.md | 6 +- docs/loop-3/add-pump.md | 14 +- docs/loop-3/displays-v3.md | 48 +- ...-cgm-add-pump.svg => add-cgm-add-pump.svg} | 0 ...dd-medtronic-1.svg => add-medtronic-1.svg} | 0 ...dd-medtronic-2.svg => add-medtronic-2.svg} | 0 ...-pump-insulin.svg => add-pump-insulin.svg} | 0 .../img/{loop-3-cgm-add.svg => cgm-add.svg} | 0 ...oop-3-cgm-blue-arrow.svg => cgm-arrow.svg} | 0 .../{loop-3-cgm-stale.svg => cgm-stale.svg} | 0 ...-fs-and-cgm-add.svg => fs-and-cgm-add.svg} | 0 .../img/{health-loop-3.svg => health.svg} | 0 .../{loop-3-hud-closed.svg => hud-closed.svg} | 0 ...closed-green.svg => icon-closed-green.svg} | 0 ...con-closed-red.svg => icon-closed-red.svg} | 0 ...osed-yellow.svg => icon-closed-yellow.svg} | 0 ...con-open-green.svg => icon-open-green.svg} | 0 ...-insulin-detail.svg => insulin-detail.svg} | 0 docs/loop-3/img/loop-3-omnipod-screen.svg | 17020 ---------------- ...-main-annotated.png => main-annotated.png} | Bin ...lus-no-rec.svg => manual-bolus-no-rec.svg} | 0 ...ual-bolus-rec.svg => manual-bolus-rec.svg} | 0 ...dt-time-change.svg => mdt-time-change.svg} | 0 ...lus-mod-rec.svg => meal-bolus-mod-rec.svg} | 0 ...-meal-bolus-rec.svg => meal-bolus-rec.svg} | 0 ...uspended.svg => modal-alert-suspended.svg} | 0 ...-modal-messages.jpg => modal-messages.jpg} | Bin ...htscout-login.svg => nightscout-login.svg} | 0 ...scout-logout.png => nightscout-logout.png} | Bin ...cheduled.svg => nominal-mdt-scheduled.svg} | 0 ...-low-temp.svg => nominal-pod-low-temp.svg} | 0 ...g => nominal-pump-high-temp-reservoir.svg} | 0 ...-confidence.svg => omnipod-confidence.svg} | 0 ...-deactivate.svg => omnipod-deactivate.svg} | 0 ...details.svg => omnipod-device-details.svg} | 0 ...ification.svg => omnipod-notification.svg} | 0 ...ipod-previous.svg => omnipod-previous.svg} | 0 ...-omnipod-screen.svg => omnipod-screen.svg} | 0 ...ime-change.svg => omnipod-time-change.svg} | 0 ...ipod-timezone.svg => omnipod-timezone.svg} | 0 ...op-3-pair-pod-duo.svg => pair-pod-duo.svg} | 0 ...-notification.svg => pod-notification.svg} | 0 ...t-add-pump.svg => pump-alert-add-pump.svg} | 0 ...-setup.svg => pump-alert-finish-setup.svg} | 0 ...-pump-alert-mtb.svg => pump-alert-mtb.svg} | 0 ...ert-no-data.svg => pump-alert-no-data.svg} | 0 ...-insulin.svg => pump-alert-no-insulin.svg} | 0 ...alert-no-pod.svg => pump-alert-no-pod.svg} | 0 ...oir-tz.svg => pump-alert-reservoir-tz.svg} | 0 ...suspended.svg => pump-alert-suspended.svg} | 0 ...p-setting-mdt.svg => pump-setting-mdt.svg} | 0 .../img/{loop-3-services.png => services.png} | Bin ...etting-add-cgm.svg => setting-add-cgm.svg} | 0 ...-add-dexcom.svg => setting-add-dexcom.svg} | 0 ...ting-add-pump.svg => setting-add-pump.svg} | 0 ...rategy.svg => setting-dosing-strategy.svg} | 0 ...ng-loop-mode.svg => setting-loop-mode.svg} | 0 ...upport-bug.svg => setting-support-bug.svg} | 0 ...etting-support.svg => setting-support.svg} | 0 .../img/{loop-3-settings.svg => settings.svg} | 0 ...ion.svg => therapy-setting-correction.svg} | 0 ...fo.svg => therapy-setting-safety-info.svg} | 0 ...idepool-mobile.png => tidepool-mobile.png} | Bin docs/loop-3/medtronic.md | 8 +- docs/loop-3/omnipod.md | 28 +- docs/loop-3/onboarding.md | 2 +- docs/loop-3/services.md | 8 +- docs/loop-3/settings.md | 10 +- docs/loop-3/therapy-settings.md | 4 +- docs/operation/features/bolus.md | 8 +- docs/operation/features/notifications.md | 2 +- 75 files changed, 71 insertions(+), 17095 deletions(-) rename docs/loop-3/img/{loop-3-hud-add-cgm-add-pump.svg => add-cgm-add-pump.svg} (100%) rename docs/loop-3/img/{loop-3-add-medtronic-1.svg => add-medtronic-1.svg} (100%) rename docs/loop-3/img/{loop-3-add-medtronic-2.svg => add-medtronic-2.svg} (100%) rename docs/loop-3/img/{loop-3-add-pump-insulin.svg => add-pump-insulin.svg} (100%) rename docs/loop-3/img/{loop-3-cgm-add.svg => cgm-add.svg} (100%) rename docs/loop-3/img/{loop-3-cgm-blue-arrow.svg => cgm-arrow.svg} (100%) rename docs/loop-3/img/{loop-3-cgm-stale.svg => cgm-stale.svg} (100%) rename docs/loop-3/img/{loop-3-fs-and-cgm-add.svg => fs-and-cgm-add.svg} (100%) rename docs/loop-3/img/{health-loop-3.svg => health.svg} (100%) rename docs/loop-3/img/{loop-3-hud-closed.svg => hud-closed.svg} (100%) rename docs/loop-3/img/{loop-3-icon-closed-green.svg => icon-closed-green.svg} (100%) rename docs/loop-3/img/{loop-3-icon-closed-red.svg => icon-closed-red.svg} (100%) rename docs/loop-3/img/{loop-3-icon-closed-yellow.svg => icon-closed-yellow.svg} (100%) rename docs/loop-3/img/{loop-3-icon-open-green.svg => icon-open-green.svg} (100%) rename docs/loop-3/img/{loop-3-insulin-detail.svg => insulin-detail.svg} (100%) delete mode 100644 docs/loop-3/img/loop-3-omnipod-screen.svg rename docs/loop-3/img/{loop-3-main-annotated.png => main-annotated.png} (100%) rename docs/loop-3/img/{loop-3-manual-bolus-no-rec.svg => manual-bolus-no-rec.svg} (100%) rename docs/loop-3/img/{loop-3-manual-bolus-rec.svg => manual-bolus-rec.svg} (100%) rename docs/loop-3/img/{loop-3-mdt-time-change.svg => mdt-time-change.svg} (100%) rename docs/loop-3/img/{loop-3-meal-bolus-mod-rec.svg => meal-bolus-mod-rec.svg} (100%) rename docs/loop-3/img/{loop-3-meal-bolus-rec.svg => meal-bolus-rec.svg} (100%) rename docs/loop-3/img/{loop-3-modal-alert-suspended.svg => modal-alert-suspended.svg} (100%) rename docs/loop-3/img/{loop-icon-modal-messages.jpg => modal-messages.jpg} (100%) rename docs/loop-3/img/{loop-3-nightscout-login.svg => nightscout-login.svg} (100%) rename docs/loop-3/img/{loop-3-nightscout-logout.png => nightscout-logout.png} (100%) rename docs/loop-3/img/{loop-3-nominal-mdt-scheduled.svg => nominal-mdt-scheduled.svg} (100%) rename docs/loop-3/img/{loop-3-nominal-pod-low-temp.svg => nominal-pod-low-temp.svg} (100%) rename docs/loop-3/img/{loop-3-nominal-pump-high-temp-reservoir.svg => nominal-pump-high-temp-reservoir.svg} (100%) rename docs/loop-3/img/{loop-3-omnipod-confidence.svg => omnipod-confidence.svg} (100%) rename docs/loop-3/img/{loop-3-omnipod-deactivate.svg => omnipod-deactivate.svg} (100%) rename docs/loop-3/img/{loop-3-omnipod-device-details.svg => omnipod-device-details.svg} (100%) rename docs/loop-3/img/{loop-3-omnipod-notification.svg => omnipod-notification.svg} (100%) rename docs/loop-3/img/{loop-3-omnipod-previous.svg => omnipod-previous.svg} (100%) rename docs/loop-3/img/{loop-3-4-omnipod-screen.svg => omnipod-screen.svg} (100%) rename docs/loop-3/img/{loop-3-omnipod-time-change.svg => omnipod-time-change.svg} (100%) rename docs/loop-3/img/{loop-3-omnipod-timezone.svg => omnipod-timezone.svg} (100%) rename docs/loop-3/img/{loop-3-pair-pod-duo.svg => pair-pod-duo.svg} (100%) rename docs/loop-3/img/{loop-3-pod-notification.svg => pod-notification.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-add-pump.svg => pump-alert-add-pump.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-finish-setup.svg => pump-alert-finish-setup.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-mtb.svg => pump-alert-mtb.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-no-data.svg => pump-alert-no-data.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-no-insulin.svg => pump-alert-no-insulin.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-no-pod.svg => pump-alert-no-pod.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-reservoir-tz.svg => pump-alert-reservoir-tz.svg} (100%) rename docs/loop-3/img/{loop-3-pump-alert-suspended.svg => pump-alert-suspended.svg} (100%) rename docs/loop-3/img/{loop-3-pump-setting-mdt.svg => pump-setting-mdt.svg} (100%) rename docs/loop-3/img/{loop-3-services.png => services.png} (100%) rename docs/loop-3/img/{loop-3-setting-add-cgm.svg => setting-add-cgm.svg} (100%) rename docs/loop-3/img/{loop-3-setting-add-dexcom.svg => setting-add-dexcom.svg} (100%) rename docs/loop-3/img/{loop-3-setting-add-pump.svg => setting-add-pump.svg} (100%) rename docs/loop-3/img/{loop-3-setting-dosing-strategy.svg => setting-dosing-strategy.svg} (100%) rename docs/loop-3/img/{loop-3-setting-loop-mode.svg => setting-loop-mode.svg} (100%) rename docs/loop-3/img/{loop-3-setting-support-bug.svg => setting-support-bug.svg} (100%) rename docs/loop-3/img/{loop-3-setting-support.svg => setting-support.svg} (100%) rename docs/loop-3/img/{loop-3-settings.svg => settings.svg} (100%) rename docs/loop-3/img/{loop-3-therapy-setting-correction.svg => therapy-setting-correction.svg} (100%) rename docs/loop-3/img/{loop-3-therapy-setting-safety-info.svg => therapy-setting-safety-info.svg} (100%) rename docs/loop-3/img/{loop-3-tidepool-mobile.png => tidepool-mobile.png} (100%) diff --git a/docs/browser/edit-browser.md b/docs/browser/edit-browser.md index 8f70a50d946..243f0b19110 100644 --- a/docs/browser/edit-browser.md +++ b/docs/browser/edit-browser.md @@ -52,7 +52,7 @@ 1. Save your changes to a patch branch 1. Prepare lines needed for each customization and save * New with 3.4.x release, there are 2 ways to add customizations (use only one) - * See [Update LoopWorkspace](#updateloopworkspace){: target="_blank" } + * See [Update LoopWorkspace](#update-loopworkspace){: target="_blank" } * See [How to use the `patches` Folder](#how-to-use-the-patches-folder){: target="_blank" } * Regardless of the method, incorporate the customization with `Action 4: Build Loop` * (Optional): [Add Test Details to *TestFlight*](bb-update.md#add-test-details-to-testflight){: target="_blank" } diff --git a/docs/browser/phone-install.md b/docs/browser/phone-install.md index 54791d78797..4d15e563a5d 100644 --- a/docs/browser/phone-install.md +++ b/docs/browser/phone-install.md @@ -82,7 +82,7 @@ Once the app is available in *TestFlight*, you can adjust whether it is automati Go back to the *TestFlight* app on your phone and tap on your app name in the list to see an expanded screen similar to the graphic below. The row to enable or disable automatic updates is highlighted in the graphic, which shows the feature disabled. This is recommended for all users. -* If you leave automatic update enabled (default), then whenever a new build is created and uploaded to *TestFlight* , it will be installed immediately (see [Unexpected *TestFlight* Expiration](#unexpected-testflight-expiration)) +* If you leave automatic update enabled (default), then whenever a new build is created and uploaded to *TestFlight* , it will be installed immediately (see [Unexpected *TestFlight* Beta Expiration](#unexpected-testflight-beta-expiration)) * WARNING: If you switch between Building with Browser and *Mac*, you must disable automatic update or Xcode will not be able to install to your phone ![enable or disable automatic update for Loop](img/testflight-auto-update.png){width="300"} diff --git a/docs/faqs/safety-faqs.md b/docs/faqs/safety-faqs.md index 405fbfa88e9..7c538bab317 100644 --- a/docs/faqs/safety-faqs.md +++ b/docs/faqs/safety-faqs.md @@ -31,7 +31,7 @@ Be sure to do this for every *Focus* mode you use. If you do not understand the components displayed in the graphic below, please spend time reviewing the information at [Displays](../loop-3/displays-v3.md). -![main loop screen when running nominally with annotation for heads-up-display, charts and toolbar](../loop-3/img/loop-3-main-annotated.png){width="450"} +![main loop screen when running nominally with annotation for heads-up-display, charts and toolbar](../loop-3/img/main-annotated.png){width="450"} {align="center"} ## Carb Entry and Insulin Delivery diff --git a/docs/faqs/time-faqs.md b/docs/faqs/time-faqs.md index 6f181d874a5..e70cdf2becc 100644 --- a/docs/faqs/time-faqs.md +++ b/docs/faqs/time-faqs.md @@ -38,7 +38,7 @@ If you have future glucose from a manual time change or just entering something The *Loop* app is very aggressive at warning you if you make this mistake. you will get a notification - even when you are in a different app. The graphic below shows the alert when you next view the *Loop* app after turning off automatic time and changing the time. Even if you respond right away, you may have at least one glucose reading in the future when you see this alert. Please [Remove Future Glucose](#remove-future-glucose). -![notification displayed when automatic time is disabled on Loop phone](../loop-3/img/loop-3-omnipod-time-change.svg){width="350"} +![notification displayed when automatic time is disabled on Loop phone](../loop-3/img/omnipod-time-change.svg){width="350"} {align="center"} The rest of this page is about changing time zones. diff --git a/docs/loop-3/add-cgm.md b/docs/loop-3/add-cgm.md index 4117eeee046..cec2f4beb61 100644 --- a/docs/loop-3/add-cgm.md +++ b/docs/loop-3/add-cgm.md @@ -4,7 +4,7 @@ A CGM can be added from the Heads-Up-Display ([HUD](displays-v3.md#heads-up-disp The HUD will look like the graphic below if no CGM or Pump is connected with Loop: -![Loop HUD when CGM and Pump have not been added](img/loop-3-hud-add-cgm-add-pump.svg){width="350"} +![Loop HUD when CGM and Pump have not been added](img/add-cgm-add-pump.svg){width="350"} {align="center"} Loop can be connected to the following CGMs: @@ -28,7 +28,7 @@ Loop can be connected to the following CGMs: To add a CGM, go to the Settings screen ⚙️, tap on `Add CGM`, and tap on your CGM. -![graphic showing some of the CGMs available with Loop 3](img/loop-3-setting-add-cgm.svg){width="500"} +![graphic showing some of the CGMs available with Loop 3](img/setting-add-cgm.svg){width="500"} {align="center"} If you later decide to use a different CGM type, you must first delete the CGM and then add CGM to choose the new one. @@ -67,7 +67,7 @@ To use the Dexcom G5, G6 or ONE: * Do not tap, leave it alone * Only add the **transmitter ID** to Loop **after** it is paired with the *Dexcom app* on your phone -![interface to add transmitter ID for Dexcom](img/loop-3-setting-add-dexcom.svg){width="300"} +![interface to add transmitter ID for Dexcom](img/setting-add-dexcom.svg){width="300"} {align="center"} #### Where to get the Transmitter ID for Dexcom G6? diff --git a/docs/loop-3/add-pump.md b/docs/loop-3/add-pump.md index 37bb6bb68c1..3d30db3002d 100644 --- a/docs/loop-3/add-pump.md +++ b/docs/loop-3/add-pump.md @@ -4,7 +4,7 @@ You can choose a pump from the Heads-Up-Display ([HUD](displays-v3.md#heads-up-d The HUD looks like the graphic below if no CGM or Pump is chosen: -![Loop HUD when both CGM and Pump have not been added](img/loop-3-hud-add-cgm-add-pump.svg){width="350"} +![Loop HUD when both CGM and Pump have not been added](img/add-cgm-add-pump.svg){width="350"} {align="center"} !!! question "Switching Pumps?" @@ -61,7 +61,7 @@ Tap on Add Pump in the Settings screen to see pump options (shown in the graphic Tap on your Pump. -![graphic showing the pumps available with Loop 3](img/loop-3-setting-add-pump.svg){width="500"} +![graphic showing the pumps available with Loop 3](img/setting-add-pump.svg){width="500"} {align="center"} @@ -73,7 +73,7 @@ Medtronic pump users - skip ahead to [Insulin Type](#insulin-type). Here are the common screens for adding Omnipod or Omnipod DASH showing the default settings. You can change the default settings later. -![initial screens for pod set up to define default notifications](img/loop-3-pod-notification.svg){width="600"} +![initial screens for pod set up to define default notifications](img/pod-notification.svg){width="600"} {align="center"} After you complete these screens, you select the insulin type. @@ -86,7 +86,7 @@ For all pumps, you can choose from the insulin types below. * **Rapid Acting** (Novolog, Humalog, Apidra) or **Ultra Rapid** (Fiasp, Lyumjev) * Inhaled insulin (Afrezza) is not offered because it is not used in pumps. [Non-Pump Insulin](displays-v3.md#event-history-reservoir-and-non-pump-insulin) -![initial selection for insulin used in pump](img/loop-3-add-pump-insulin.svg){width="250"} +![initial selection for insulin used in pump](img/add-pump-insulin.svg){width="250"} {align="center"} To add a Omnipod DASH pump, skip ahead to [Omnipod Commom 2](#omnipod-common-2). @@ -122,7 +122,7 @@ After selecting a RileyLink for Omnipod, all other actions for Omnipod and Omnip For Omnipod (left) and Omnipod DASH (right), you should see the `Pair Pod` screen. -![pair pod screens for Omnipod and Omnipod DASH](img/loop-3-pair-pod-duo.svg){width="500"} +![pair pod screens for Omnipod and Omnipod DASH](img/pair-pod-duo.svg){width="500"} {align="center"} At this point - you should hit `Cancel` (upper right of screen) and review the [Omnipod Common](omnipod.md) page before pairing a pod. @@ -172,7 +172,7 @@ The final step is to connect your Medtronic pump to Loop. - Add your pump's region, color as shown in the graphic below * Note that some Canadian pumps use `CM` instead of `CA` for the region code. Select `CA/CM` in the dropdown menu. -![how to add country code and color for medtronic pump](img/loop-3-add-medtronic-1.svg){width="500"} +![how to add country code and color for medtronic pump](img/add-medtronic-1.svg){width="500"} {align="center"} - Add your pump's 6-digit serial number as shown in the graphic below @@ -182,7 +182,7 @@ The final step is to connect your Medtronic pump to Loop. - If the [Delivery Limits](therapy-settings.md#delivery-limits) (max basal and max bolus) in the pump are lower than values you entered in Loop you will see an error message: `Pump Error. Max setting exceeded`. (See note below for other reasons you might see this message.) - In this case, edit the values in the pump and then click `Connect` to retry. -![how to enter serial number for a medtronic pump](img/loop-3-add-medtronic-2.svg){width="750"} +![how to enter serial number for a medtronic pump](img/add-medtronic-2.svg){width="750"} {align="center"} !!! warning "Max setting exceeded" diff --git a/docs/loop-3/displays-v3.md b/docs/loop-3/displays-v3.md index 0ac7c51d9f8..9a64ba86d54 100644 --- a/docs/loop-3/displays-v3.md +++ b/docs/loop-3/displays-v3.md @@ -4,7 +4,7 @@ This page has detailed information about Loop 3 Displays. The main Loop screen contains a Heads-Up Display ([HUD](#heads-up-display)) at the top (when in portrait mode) with various charts in the middle and a toolbar at the bottom. As part of the HUD, important messages will appear in the [Status Row](#hud-status-row) location. -![main loop screen when running nominally with annotation for heads-up-display, charts and toolbar](img/loop-3-main-annotated.png){width="450"} +![main loop screen when running nominally with annotation for heads-up-display, charts and toolbar](img/main-annotated.png){width="450"} {align="center"} #### Landscape @@ -110,7 +110,7 @@ Please note that for safety reasons, Loop will assume a bolus was successful, ev Clicking on either the Active Insulin or Insulin Delivery charts will open your Insulin Delivery history. The top of the screen will display the current IOB and the total insulin delivered for the day since midnight (or since the time the loop became active if you started Loop after midnight). There are three tabs that can be viewed, with Event History shown by default: -![figure showing event history, reservoir and non-pump insulin tabs](img/loop-3-insulin-detail.svg){width="250"} +![figure showing event history, reservoir and non-pump insulin tabs](img/insulin-detail.svg){width="250"} {align="center"} * **Event History**: Event history is a detailed accounting of all pump/pod actions. Both Medtronic and Omnipod users will have a detailed record of event history. If you tap on an event, you get more detail. Turn your phone to landscape to improve readability. @@ -176,7 +176,7 @@ From left to right, the icons are: The Heads-Up-Display, visible in portrait mode, shows the Glucose Status on the left, the Loop Status in the middle and the Pump Status on the right. Once a CGM and pump have been added to Loop, the Loop Status icon will update and ideally be similar to the graphic below. -![heads-up-display when loop is operating nominally](img/loop-3-hud-closed.svg){width="300"} +![heads-up-display when loop is operating nominally](img/hud-closed.svg){width="300"} {align="center"} * The Glucose is displayed in the same units as the selected CGM @@ -203,10 +203,10 @@ This table shows examples of Loop Status Icons and what each icon means. |
Icon | Meaning | |---|---| -|![A green circle indicating nominal status for closed loop](img/loop-3-icon-closed-green.svg){width="175"}|A green circle indicates the app is in Closed Loop mode and it completed a [cycle](#loop-cycle) within the last 5 minutes.| -|![A yellow circle indicating warning status for closed loop](img/loop-3-icon-closed-yellow.svg){width="175"}|A yellow circle indicates the app is in Closed Loop mode and it has completed a cycle in the last 5-15 minutes.

It is not unusual to have a few instances of yellow loops per day. They can be caused by being out of range (physically), Bluetooth or RileyLink “noise” interference, or even that the pump was giving a bolus.

Most yellow loops will self-resolve without needing any special troubleshooting.| -|![A red circle indicating failure status for closed loop](img/loop-3-icon-closed-red.svg){width="175"}|A red circle indicates the Loop has not completed in over 15 minutes.

This is not a typical state, and you should [troubleshoot](../troubleshooting/red-loop.md) the problem.

In this case, either the [Glucose Icon](#glucose-status-icon) or the [Pump Icon](#pump-status-icon) or both will display an `alert` graphic.| -|![A green open circle with a gap at the top denoting open loop](img/loop-3-icon-open-green.svg){width="175"}|When the circle is open at the top, Loop is operating in “Open Loop” mode. The color code is the same as for closed loop except the cycle involves updating predictions from available blood glucose values and obtaining pump status; but the app will not make any automated changes in insulin delivery.

While Manual Temp Basal (MTB) is active, the Open Loop icon will be displayed until MTB expires or is cancelled. _Note that MTB is only implemented in Loop 3 for Omnipod and Omnipod DASH, at the current time._| +|![A green circle indicating nominal status for closed loop](img/icon-closed-green.svg){width="175"}|A green circle indicates the app is in Closed Loop mode and it completed a [cycle](#loop-cycle) within the last 5 minutes.| +|![A yellow circle indicating warning status for closed loop](img/icon-closed-yellow.svg){width="175"}|A yellow circle indicates the app is in Closed Loop mode and it has completed a cycle in the last 5-15 minutes.

It is not unusual to have a few instances of yellow loops per day. They can be caused by being out of range (physically), Bluetooth or RileyLink “noise” interference, or even that the pump was giving a bolus.

Most yellow loops will self-resolve without needing any special troubleshooting.| +|![A red circle indicating failure status for closed loop](img/icon-closed-red.svg){width="175"}|A red circle indicates the Loop has not completed in over 15 minutes.

This is not a typical state, and you should [troubleshoot](../troubleshooting/red-loop.md) the problem.

In this case, either the [Glucose Icon](#glucose-status-icon) or the [Pump Icon](#pump-status-icon) or both will display an `alert` graphic.| +|![A green open circle with a gap at the top denoting open loop](img/icon-open-green.svg){width="175"}|When the circle is open at the top, Loop is operating in “Open Loop” mode. The color code is the same as for closed loop except the cycle involves updating predictions from available blood glucose values and obtaining pump status; but the app will not make any automated changes in insulin delivery.

While Manual Temp Basal (MTB) is active, the Open Loop icon will be displayed until MTB expires or is cancelled. _Note that MTB is only implemented in Loop 3 for Omnipod and Omnipod DASH, at the current time._| !!! info "Fun Fact" The loop status icon will pulse slightly when Loop is communicating with the pump. The pulsing will stop when the communication has completed (green loop) or given up (yellow or red loop). @@ -220,7 +220,7 @@ When you tap on the Loop Icon on the main screen, you will see a message similar On your phone, you should see the green, yellow or red icon in the background - the color is not captured when taking screenshots of the modal message. -![example modal messages seen after tapping the loop icon on the main screen](img/loop-icon-modal-messages.jpg){width="750"} +![example modal messages seen after tapping the loop icon on the main screen](img/modal-messages.jpg){width="750"} {align="center"} @@ -230,10 +230,10 @@ The table below shows examples of the Glucose Status Icon and what each icon mea |
Icon | Meaning | |---|---| -|![Blood Glucose reading with blue trend arrow](img/loop-3-cgm-blue-arrow.svg){width="175"}|The current glucose reading is displayed. It can be from the CGM or from a finger stick. The value must have been updated within the last 15 minutes to be displayed.

For the example shown, a valid trend arrow is available and is blue. Color codes are explained at this [link](#glucose-color-code).| -|![three dashes to indicate stale blood glucose](img/loop-3-cgm-stale.svg){width="175"}|The last glucose reading from the CGM or from a finger stick is stale, i.e., it was acquired more than 15 minutes ago. In this case, the glucose prediction will stop updating.

The [HUD Status Row](#hud-status-row) message enables user to enter fingerstick glucose value if desired.

If in closed-loop mode, no changes will be made to insulin delivery. If a temporary basal is running, it continues running for the scheduled duration. Once the temporary basal expires, the pump resumes the scheduled basal rate.

When the app issues a temporary basal, the duration is always 30 minutes.

The user can enter a manual temporary basal duration up to the limits of their pump.| -|![an Add CGM with plus sign icon](img/loop-3-cgm-add.svg){width="175"}|If no CGM is currently selected, the Add CGM icon is displayed. The user can add a CGM following these [instructions](add-cgm.md).| -|![valid glucose reading with a plus sign](img/loop-3-fs-and-cgm-add.svg){width="175"}|If no CGM is currently selected, but a glucose value was acquired within the last 15 minutes (from fingerstick or a different CGM), that value is displayed along with a plus sign. By tapping on the icon, the user can add a CGM following these [instructions](add-cgm.md).| +|![Blood Glucose reading with blue trend arrow](img/cgm-arrow.svg){width="175"}|The current glucose reading is displayed. It can be from the CGM or from a finger stick. The value must have been updated within the last 15 minutes to be displayed.

For the example shown, a valid trend arrow is available and is blue. Color codes are explained at this [link](#glucose-color-code).| +|![three dashes to indicate stale blood glucose](img/cgm-stale.svg){width="175"}|The last glucose reading from the CGM or from a finger stick is stale, i.e., it was acquired more than 15 minutes ago. In this case, the glucose prediction will stop updating.

The [HUD Status Row](#hud-status-row) message enables user to enter fingerstick glucose value if desired.

If in closed-loop mode, no changes will be made to insulin delivery. If a temporary basal is running, it continues running for the scheduled duration. Once the temporary basal expires, the pump resumes the scheduled basal rate.

When the app issues a temporary basal, the duration is always 30 minutes.

The user can enter a manual temporary basal duration up to the limits of their pump.| +|![an Add CGM with plus sign icon](img/cgm-add.svg){width="175"}|If no CGM is currently selected, the Add CGM icon is displayed. The user can add a CGM following these [instructions](add-cgm.md).| +|![valid glucose reading with a plus sign](img/fs-and-cgm-add.svg){width="175"}|If no CGM is currently selected, but a glucose value was acquired within the last 15 minutes (from fingerstick or a different CGM), that value is displayed along with a plus sign. By tapping on the icon, the user can add a CGM following these [instructions](add-cgm.md).| #### Glucose Color Code @@ -279,17 +279,17 @@ The table below shows examples for a few nominal Pump Status Icons and Alert mes |
Icon | Meaning | |---|---| -|![low temp basal indicator plus pod reservoir above 50 U](img/loop-3-nominal-pod-low-temp.svg){width="175"}|This nominal pump status graphic is for a Pod with temp basal less than scheduled basal rate and no reported reservoir level.| -|![scheduled basal indicator for partially full mdt reservoir](img/loop-3-nominal-mdt-scheduled.svg){width="175"}|This nominal pump status graphic is for a Medtronic pump running scheduled basal rate and with a half-full reservoir.

For a Pod, the reservoir shows full until pod estimates reservoir is below 50 U remaining.| -|![high temp basal indicator with reservoir above notification level](img/loop-3-nominal-pump-high-temp-reservoir.svg){width="175"}|This nominal pump status graphic is for a pump running a high temp basal rate with the reservoir level reported.

When the reservoir level is above the notification level, the reservoir graphic is orange.| -|![high temp basal indicator with reservoir level below alert and clock icon](img/loop-3-pump-alert-reservoir-tz.svg){width="175"}|This pump status graphic indicates 2 alerts: (1) the 15 U reservoir level is less than the notification level of 20 U selected by this user and (2) a small clock icon is added to the display to indicate the phone time zone and pump time zone do not match.

When the reservoir level is below the notification level, the reservoir graphic is yellow.

Follow the link for [time zone](#time-zone) information.| -|![pump alert - red exclamation point with phrase no insulin](img/loop-3-pump-alert-no-insulin.svg){width="175"}|This No Insulin alert message indicates the reservoir reports 0 U. Although pumps will continue to deliver some insulin after this point (max of 4 U for pods, or until all insulin is gone for both pods and Medtronic), the user should be aware that insulin delivery could stop at any moment.

Note that if you see a display of 0 U in yellow, that means there is 0.5 U or less reported by the pump.| -|![pump alert - yellow exclamation point with phrase no pod](img/loop-3-pump-alert-no-pod.svg){width="175"}|The No Pod alert message indicates no pod is currently paired so no insulin is being delivered.

Tap on the icon to reach the pod setting screen and pair a new pod, or switch to a different source for providing insulin.| -|![pump alert - yellow pause indicator that pump is suspended](img/loop-3-pump-alert-suspended.svg){width="175"}|The Insulin Suspended alert message indicates all insulin delivery has been suspended.

A [Status Row](#hud-status-row) message appears to enable the user to resume delivery with one tap.

Alternatively, insulin can be resumed by tapping on the Pump Icon to enter the Pump Setting display and resume from that screen.| -|![pump alert - yellow exclamation point with phrase manual basal](img/loop-3-pump-alert-mtb.svg){width="175"}|The Manual Bolus alert message indicates the user has initiated a manual temp basal (MTB). While the MTB is active, the Loop Icon Status will also display an Open Loop symbol to indicate no automatic adjustments are made until MTB expires or is canceled.

The lifecycle indicator across the bottom of the pod status indicates a pod within the final 24 hours of nominal life.

Tapping on the icon takes the user to the pump settings display where the rate and duration of the MTB are displayed.| -|![pump alert - red exclamation point with phrase no data](img/loop-3-pump-alert-no-data.svg){width="175"}|The No Data alert message indicates it has been more than 15 minutes since the app was able to communicate with the pump.

Follow these [troubleshooting](../troubleshooting/red-loop.md) steps.| -|![pump alert - red plus sign with phrase add pump](img/loop-3-pump-alert-add-pump.svg){width="175"}|The Add Pump alert message indicates no pump has been added.

Follow the instruction for [adding a pump](add-pump.md#add-pump).| -|![pump alert - exclamation point with phrase finish setup](img/loop-3-pump-alert-finish-setup.svg){width="175"}|The Finish Setup alert indicates the pod setup procedure was not completed.

Tap on the icon to be taken to the Omnipod menu to complete the setup.

(If your icon says Finish Pairing, you are running older code and will be taken to the Insert Cannula screen even if pod is still priming. Make sure priming completes before trying to insert the cannula).| +|![low temp basal indicator plus pod reservoir above 50 U](img/nominal-pod-low-temp.svg){width="175"}|This nominal pump status graphic is for a Pod with temp basal less than scheduled basal rate and no reported reservoir level.| +|![scheduled basal indicator for partially full mdt reservoir](img/nominal-mdt-scheduled.svg){width="175"}|This nominal pump status graphic is for a Medtronic pump running scheduled basal rate and with a half-full reservoir.

For a Pod, the reservoir shows full until pod estimates reservoir is below 50 U remaining.| +|![high temp basal indicator with reservoir above notification level](img/nominal-pump-high-temp-reservoir.svg){width="175"}|This nominal pump status graphic is for a pump running a high temp basal rate with the reservoir level reported.

When the reservoir level is above the notification level, the reservoir graphic is orange.| +|![high temp basal indicator with reservoir level below alert and clock icon](img/pump-alert-reservoir-tz.svg){width="175"}|This pump status graphic indicates 2 alerts: (1) the 15 U reservoir level is less than the notification level of 20 U selected by this user and (2) a small clock icon is added to the display to indicate the phone time zone and pump time zone do not match.

When the reservoir level is below the notification level, the reservoir graphic is yellow.

Follow the link for [time zone](#time-zone) information.| +|![pump alert - red exclamation point with phrase no insulin](img/pump-alert-no-insulin.svg){width="175"}|This No Insulin alert message indicates the reservoir reports 0 U. Although pumps will continue to deliver some insulin after this point (max of 4 U for pods, or until all insulin is gone for both pods and Medtronic), the user should be aware that insulin delivery could stop at any moment.

Note that if you see a display of 0 U in yellow, that means there is 0.5 U or less reported by the pump.| +|![pump alert - yellow exclamation point with phrase no pod](img/pump-alert-no-pod.svg){width="175"}|The No Pod alert message indicates no pod is currently paired so no insulin is being delivered.

Tap on the icon to reach the pod setting screen and pair a new pod, or switch to a different source for providing insulin.| +|![pump alert - yellow pause indicator that pump is suspended](img/pump-alert-suspended.svg){width="175"}|The Insulin Suspended alert message indicates all insulin delivery has been suspended.

A [Status Row](#hud-status-row) message appears to enable the user to resume delivery with one tap.

Alternatively, insulin can be resumed by tapping on the Pump Icon to enter the Pump Setting display and resume from that screen.| +|![pump alert - yellow exclamation point with phrase manual basal](img/pump-alert-mtb.svg){width="175"}|The Manual Bolus alert message indicates the user has initiated a manual temp basal (MTB). While the MTB is active, the Loop Icon Status will also display an Open Loop symbol to indicate no automatic adjustments are made until MTB expires or is canceled.

The lifecycle indicator across the bottom of the pod status indicates a pod within the final 24 hours of nominal life.

Tapping on the icon takes the user to the pump settings display where the rate and duration of the MTB are displayed.| +|![pump alert - red exclamation point with phrase no data](img/pump-alert-no-data.svg){width="175"}|The No Data alert message indicates it has been more than 15 minutes since the app was able to communicate with the pump.

Follow these [troubleshooting](../troubleshooting/red-loop.md) steps.| +|![pump alert - red plus sign with phrase add pump](img/pump-alert-add-pump.svg){width="175"}|The Add Pump alert message indicates no pump has been added.

Follow the instruction for [adding a pump](add-pump.md#add-pump).| +|![pump alert - exclamation point with phrase finish setup](img/pump-alert-finish-setup.svg){width="175"}|The Finish Setup alert indicates the pod setup procedure was not completed.

Tap on the icon to be taken to the Omnipod menu to complete the setup.

(If your icon says Finish Pairing, you are running older code and will be taken to the Insert Cannula screen even if pod is still priming. Make sure priming completes before trying to insert the cannula).| ### Time Zone @@ -326,7 +326,7 @@ What about other time changes? Suppose the iOS -> General -> Time & Date is mod Loop 3 will display this warning modal screen if it detects a problem with the Phone time. It leaves it up the user to decide what action should be taken. To make this warning stop, go to iOS -> General -> Time & Date and enable Set Automatically. -![graphic warning user of a problem with the time on the phone](img/loop-3-omnipod-time-change.svg){width="300"} +![graphic warning user of a problem with the time on the phone](img/omnipod-time-change.svg){width="300"} {align="center"} ### HUD Status Row diff --git a/docs/loop-3/img/loop-3-hud-add-cgm-add-pump.svg b/docs/loop-3/img/add-cgm-add-pump.svg similarity index 100% rename from docs/loop-3/img/loop-3-hud-add-cgm-add-pump.svg rename to docs/loop-3/img/add-cgm-add-pump.svg diff --git a/docs/loop-3/img/loop-3-add-medtronic-1.svg b/docs/loop-3/img/add-medtronic-1.svg similarity index 100% rename from docs/loop-3/img/loop-3-add-medtronic-1.svg rename to docs/loop-3/img/add-medtronic-1.svg diff --git a/docs/loop-3/img/loop-3-add-medtronic-2.svg b/docs/loop-3/img/add-medtronic-2.svg similarity index 100% rename from docs/loop-3/img/loop-3-add-medtronic-2.svg rename to docs/loop-3/img/add-medtronic-2.svg diff --git a/docs/loop-3/img/loop-3-add-pump-insulin.svg b/docs/loop-3/img/add-pump-insulin.svg similarity index 100% rename from docs/loop-3/img/loop-3-add-pump-insulin.svg rename to docs/loop-3/img/add-pump-insulin.svg diff --git a/docs/loop-3/img/loop-3-cgm-add.svg b/docs/loop-3/img/cgm-add.svg similarity index 100% rename from docs/loop-3/img/loop-3-cgm-add.svg rename to docs/loop-3/img/cgm-add.svg diff --git a/docs/loop-3/img/loop-3-cgm-blue-arrow.svg b/docs/loop-3/img/cgm-arrow.svg similarity index 100% rename from docs/loop-3/img/loop-3-cgm-blue-arrow.svg rename to docs/loop-3/img/cgm-arrow.svg diff --git a/docs/loop-3/img/loop-3-cgm-stale.svg b/docs/loop-3/img/cgm-stale.svg similarity index 100% rename from docs/loop-3/img/loop-3-cgm-stale.svg rename to docs/loop-3/img/cgm-stale.svg diff --git a/docs/loop-3/img/loop-3-fs-and-cgm-add.svg b/docs/loop-3/img/fs-and-cgm-add.svg similarity index 100% rename from docs/loop-3/img/loop-3-fs-and-cgm-add.svg rename to docs/loop-3/img/fs-and-cgm-add.svg diff --git a/docs/loop-3/img/health-loop-3.svg b/docs/loop-3/img/health.svg similarity index 100% rename from docs/loop-3/img/health-loop-3.svg rename to docs/loop-3/img/health.svg diff --git a/docs/loop-3/img/loop-3-hud-closed.svg b/docs/loop-3/img/hud-closed.svg similarity index 100% rename from docs/loop-3/img/loop-3-hud-closed.svg rename to docs/loop-3/img/hud-closed.svg diff --git a/docs/loop-3/img/loop-3-icon-closed-green.svg b/docs/loop-3/img/icon-closed-green.svg similarity index 100% rename from docs/loop-3/img/loop-3-icon-closed-green.svg rename to docs/loop-3/img/icon-closed-green.svg diff --git a/docs/loop-3/img/loop-3-icon-closed-red.svg b/docs/loop-3/img/icon-closed-red.svg similarity index 100% rename from docs/loop-3/img/loop-3-icon-closed-red.svg rename to docs/loop-3/img/icon-closed-red.svg diff --git a/docs/loop-3/img/loop-3-icon-closed-yellow.svg b/docs/loop-3/img/icon-closed-yellow.svg similarity index 100% rename from docs/loop-3/img/loop-3-icon-closed-yellow.svg rename to docs/loop-3/img/icon-closed-yellow.svg diff --git a/docs/loop-3/img/loop-3-icon-open-green.svg b/docs/loop-3/img/icon-open-green.svg similarity index 100% rename from docs/loop-3/img/loop-3-icon-open-green.svg rename to docs/loop-3/img/icon-open-green.svg diff --git a/docs/loop-3/img/loop-3-insulin-detail.svg b/docs/loop-3/img/insulin-detail.svg similarity index 100% rename from docs/loop-3/img/loop-3-insulin-detail.svg rename to docs/loop-3/img/insulin-detail.svg diff --git a/docs/loop-3/img/loop-3-omnipod-screen.svg b/docs/loop-3/img/loop-3-omnipod-screen.svg deleted file mode 100644 index 593051f8811..00000000000 --- a/docs/loop-3/img/loop-3-omnipod-screen.svg +++ /dev/null @@ -1,17020 +0,0 @@ - -image/svg+xmlCommonOmnipod diff --git a/docs/loop-3/img/loop-3-main-annotated.png b/docs/loop-3/img/main-annotated.png similarity index 100% rename from docs/loop-3/img/loop-3-main-annotated.png rename to docs/loop-3/img/main-annotated.png diff --git a/docs/loop-3/img/loop-3-manual-bolus-no-rec.svg b/docs/loop-3/img/manual-bolus-no-rec.svg similarity index 100% rename from docs/loop-3/img/loop-3-manual-bolus-no-rec.svg rename to docs/loop-3/img/manual-bolus-no-rec.svg diff --git a/docs/loop-3/img/loop-3-manual-bolus-rec.svg b/docs/loop-3/img/manual-bolus-rec.svg similarity index 100% rename from docs/loop-3/img/loop-3-manual-bolus-rec.svg rename to docs/loop-3/img/manual-bolus-rec.svg diff --git a/docs/loop-3/img/loop-3-mdt-time-change.svg b/docs/loop-3/img/mdt-time-change.svg similarity index 100% rename from docs/loop-3/img/loop-3-mdt-time-change.svg rename to docs/loop-3/img/mdt-time-change.svg diff --git a/docs/loop-3/img/loop-3-meal-bolus-mod-rec.svg b/docs/loop-3/img/meal-bolus-mod-rec.svg similarity index 100% rename from docs/loop-3/img/loop-3-meal-bolus-mod-rec.svg rename to docs/loop-3/img/meal-bolus-mod-rec.svg diff --git a/docs/loop-3/img/loop-3-meal-bolus-rec.svg b/docs/loop-3/img/meal-bolus-rec.svg similarity index 100% rename from docs/loop-3/img/loop-3-meal-bolus-rec.svg rename to docs/loop-3/img/meal-bolus-rec.svg diff --git a/docs/loop-3/img/loop-3-modal-alert-suspended.svg b/docs/loop-3/img/modal-alert-suspended.svg similarity index 100% rename from docs/loop-3/img/loop-3-modal-alert-suspended.svg rename to docs/loop-3/img/modal-alert-suspended.svg diff --git a/docs/loop-3/img/loop-icon-modal-messages.jpg b/docs/loop-3/img/modal-messages.jpg similarity index 100% rename from docs/loop-3/img/loop-icon-modal-messages.jpg rename to docs/loop-3/img/modal-messages.jpg diff --git a/docs/loop-3/img/loop-3-nightscout-login.svg b/docs/loop-3/img/nightscout-login.svg similarity index 100% rename from docs/loop-3/img/loop-3-nightscout-login.svg rename to docs/loop-3/img/nightscout-login.svg diff --git a/docs/loop-3/img/loop-3-nightscout-logout.png b/docs/loop-3/img/nightscout-logout.png similarity index 100% rename from docs/loop-3/img/loop-3-nightscout-logout.png rename to docs/loop-3/img/nightscout-logout.png diff --git a/docs/loop-3/img/loop-3-nominal-mdt-scheduled.svg b/docs/loop-3/img/nominal-mdt-scheduled.svg similarity index 100% rename from docs/loop-3/img/loop-3-nominal-mdt-scheduled.svg rename to docs/loop-3/img/nominal-mdt-scheduled.svg diff --git a/docs/loop-3/img/loop-3-nominal-pod-low-temp.svg b/docs/loop-3/img/nominal-pod-low-temp.svg similarity index 100% rename from docs/loop-3/img/loop-3-nominal-pod-low-temp.svg rename to docs/loop-3/img/nominal-pod-low-temp.svg diff --git a/docs/loop-3/img/loop-3-nominal-pump-high-temp-reservoir.svg b/docs/loop-3/img/nominal-pump-high-temp-reservoir.svg similarity index 100% rename from docs/loop-3/img/loop-3-nominal-pump-high-temp-reservoir.svg rename to docs/loop-3/img/nominal-pump-high-temp-reservoir.svg diff --git a/docs/loop-3/img/loop-3-omnipod-confidence.svg b/docs/loop-3/img/omnipod-confidence.svg similarity index 100% rename from docs/loop-3/img/loop-3-omnipod-confidence.svg rename to docs/loop-3/img/omnipod-confidence.svg diff --git a/docs/loop-3/img/loop-3-omnipod-deactivate.svg b/docs/loop-3/img/omnipod-deactivate.svg similarity index 100% rename from docs/loop-3/img/loop-3-omnipod-deactivate.svg rename to docs/loop-3/img/omnipod-deactivate.svg diff --git a/docs/loop-3/img/loop-3-omnipod-device-details.svg b/docs/loop-3/img/omnipod-device-details.svg similarity index 100% rename from docs/loop-3/img/loop-3-omnipod-device-details.svg rename to docs/loop-3/img/omnipod-device-details.svg diff --git a/docs/loop-3/img/loop-3-omnipod-notification.svg b/docs/loop-3/img/omnipod-notification.svg similarity index 100% rename from docs/loop-3/img/loop-3-omnipod-notification.svg rename to docs/loop-3/img/omnipod-notification.svg diff --git a/docs/loop-3/img/loop-3-omnipod-previous.svg b/docs/loop-3/img/omnipod-previous.svg similarity index 100% rename from docs/loop-3/img/loop-3-omnipod-previous.svg rename to docs/loop-3/img/omnipod-previous.svg diff --git a/docs/loop-3/img/loop-3-4-omnipod-screen.svg b/docs/loop-3/img/omnipod-screen.svg similarity index 100% rename from docs/loop-3/img/loop-3-4-omnipod-screen.svg rename to docs/loop-3/img/omnipod-screen.svg diff --git a/docs/loop-3/img/loop-3-omnipod-time-change.svg b/docs/loop-3/img/omnipod-time-change.svg similarity index 100% rename from docs/loop-3/img/loop-3-omnipod-time-change.svg rename to docs/loop-3/img/omnipod-time-change.svg diff --git a/docs/loop-3/img/loop-3-omnipod-timezone.svg b/docs/loop-3/img/omnipod-timezone.svg similarity index 100% rename from docs/loop-3/img/loop-3-omnipod-timezone.svg rename to docs/loop-3/img/omnipod-timezone.svg diff --git a/docs/loop-3/img/loop-3-pair-pod-duo.svg b/docs/loop-3/img/pair-pod-duo.svg similarity index 100% rename from docs/loop-3/img/loop-3-pair-pod-duo.svg rename to docs/loop-3/img/pair-pod-duo.svg diff --git a/docs/loop-3/img/loop-3-pod-notification.svg b/docs/loop-3/img/pod-notification.svg similarity index 100% rename from docs/loop-3/img/loop-3-pod-notification.svg rename to docs/loop-3/img/pod-notification.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-add-pump.svg b/docs/loop-3/img/pump-alert-add-pump.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-add-pump.svg rename to docs/loop-3/img/pump-alert-add-pump.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-finish-setup.svg b/docs/loop-3/img/pump-alert-finish-setup.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-finish-setup.svg rename to docs/loop-3/img/pump-alert-finish-setup.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-mtb.svg b/docs/loop-3/img/pump-alert-mtb.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-mtb.svg rename to docs/loop-3/img/pump-alert-mtb.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-no-data.svg b/docs/loop-3/img/pump-alert-no-data.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-no-data.svg rename to docs/loop-3/img/pump-alert-no-data.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-no-insulin.svg b/docs/loop-3/img/pump-alert-no-insulin.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-no-insulin.svg rename to docs/loop-3/img/pump-alert-no-insulin.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-no-pod.svg b/docs/loop-3/img/pump-alert-no-pod.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-no-pod.svg rename to docs/loop-3/img/pump-alert-no-pod.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-reservoir-tz.svg b/docs/loop-3/img/pump-alert-reservoir-tz.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-reservoir-tz.svg rename to docs/loop-3/img/pump-alert-reservoir-tz.svg diff --git a/docs/loop-3/img/loop-3-pump-alert-suspended.svg b/docs/loop-3/img/pump-alert-suspended.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-alert-suspended.svg rename to docs/loop-3/img/pump-alert-suspended.svg diff --git a/docs/loop-3/img/loop-3-pump-setting-mdt.svg b/docs/loop-3/img/pump-setting-mdt.svg similarity index 100% rename from docs/loop-3/img/loop-3-pump-setting-mdt.svg rename to docs/loop-3/img/pump-setting-mdt.svg diff --git a/docs/loop-3/img/loop-3-services.png b/docs/loop-3/img/services.png similarity index 100% rename from docs/loop-3/img/loop-3-services.png rename to docs/loop-3/img/services.png diff --git a/docs/loop-3/img/loop-3-setting-add-cgm.svg b/docs/loop-3/img/setting-add-cgm.svg similarity index 100% rename from docs/loop-3/img/loop-3-setting-add-cgm.svg rename to docs/loop-3/img/setting-add-cgm.svg diff --git a/docs/loop-3/img/loop-3-setting-add-dexcom.svg b/docs/loop-3/img/setting-add-dexcom.svg similarity index 100% rename from docs/loop-3/img/loop-3-setting-add-dexcom.svg rename to docs/loop-3/img/setting-add-dexcom.svg diff --git a/docs/loop-3/img/loop-3-setting-add-pump.svg b/docs/loop-3/img/setting-add-pump.svg similarity index 100% rename from docs/loop-3/img/loop-3-setting-add-pump.svg rename to docs/loop-3/img/setting-add-pump.svg diff --git a/docs/loop-3/img/loop-3-setting-dosing-strategy.svg b/docs/loop-3/img/setting-dosing-strategy.svg similarity index 100% rename from docs/loop-3/img/loop-3-setting-dosing-strategy.svg rename to docs/loop-3/img/setting-dosing-strategy.svg diff --git a/docs/loop-3/img/loop-3-setting-loop-mode.svg b/docs/loop-3/img/setting-loop-mode.svg similarity index 100% rename from docs/loop-3/img/loop-3-setting-loop-mode.svg rename to docs/loop-3/img/setting-loop-mode.svg diff --git a/docs/loop-3/img/loop-3-setting-support-bug.svg b/docs/loop-3/img/setting-support-bug.svg similarity index 100% rename from docs/loop-3/img/loop-3-setting-support-bug.svg rename to docs/loop-3/img/setting-support-bug.svg diff --git a/docs/loop-3/img/loop-3-setting-support.svg b/docs/loop-3/img/setting-support.svg similarity index 100% rename from docs/loop-3/img/loop-3-setting-support.svg rename to docs/loop-3/img/setting-support.svg diff --git a/docs/loop-3/img/loop-3-settings.svg b/docs/loop-3/img/settings.svg similarity index 100% rename from docs/loop-3/img/loop-3-settings.svg rename to docs/loop-3/img/settings.svg diff --git a/docs/loop-3/img/loop-3-therapy-setting-correction.svg b/docs/loop-3/img/therapy-setting-correction.svg similarity index 100% rename from docs/loop-3/img/loop-3-therapy-setting-correction.svg rename to docs/loop-3/img/therapy-setting-correction.svg diff --git a/docs/loop-3/img/loop-3-therapy-setting-safety-info.svg b/docs/loop-3/img/therapy-setting-safety-info.svg similarity index 100% rename from docs/loop-3/img/loop-3-therapy-setting-safety-info.svg rename to docs/loop-3/img/therapy-setting-safety-info.svg diff --git a/docs/loop-3/img/loop-3-tidepool-mobile.png b/docs/loop-3/img/tidepool-mobile.png similarity index 100% rename from docs/loop-3/img/loop-3-tidepool-mobile.png rename to docs/loop-3/img/tidepool-mobile.png diff --git a/docs/loop-3/medtronic.md b/docs/loop-3/medtronic.md index 0f5568cb133..7f5d1a246fc 100644 --- a/docs/loop-3/medtronic.md +++ b/docs/loop-3/medtronic.md @@ -6,7 +6,7 @@ To bring up the Pump Settings display, tap on the pump icon in the Heads Up Disp Medtronic status and commands are found in the Pump Settings screen shown in the graphic below. The bottom section with Pump ID, Firware Version and Region is configured at the time the pump is connected to Loop. You cannot edit those lines. -![Medtronic Pump Settings screen](img/loop-3-pump-setting-mdt.svg){width="300"} +![Medtronic Pump Settings screen](img/pump-setting-mdt.svg){width="300"} {align="center"} ### Suspend Delivery @@ -19,7 +19,7 @@ When the phone is in portrait mode, so the HUD is visible: * The user is alerted that pump is suspended by the HUD [Pump Status Icon](displays-v3.md#pump-status-icon). -![pump status icon when suspended](img/loop-3-pump-alert-suspended.svg){width="150"} +![pump status icon when suspended](img/pump-alert-suspended.svg){width="150"} {align="center"} * The [HUD Status Row](displays-v3.md#hud-status-row) message can be tapped to resume delivery. @@ -77,11 +77,11 @@ During normal operation, Loop automatically keeps phone time and pump time align When the time zone for the pump and phone are not the same, you will notice a small clock symbol in the upper right of the pump status icon. -![high temp basal indicator with reservoir level below alert and clock icon](img/loop-3-pump-alert-reservoir-tz.svg){width="150"} +![high temp basal indicator with reservoir level below alert and clock icon](img/pump-alert-reservoir-tz.svg){width="150"} Navigate to the Pump Settings screen. Right below the Pump Battery Remaining and Pump Time rows, there is a new row `Sync to Current Time`. When you tap that row, the time for the Medtronic pump is updated to the current Loop phone time. -![row on pump settings to change time on pump](img/loop-3-mdt-time-change.svg){width="300"} +![row on pump settings to change time on pump](img/mdt-time-change.svg){width="300"} {center} ### Delete Pump diff --git a/docs/loop-3/omnipod.md b/docs/loop-3/omnipod.md index c9dd1c98e51..1bb29bd7685 100644 --- a/docs/loop-3/omnipod.md +++ b/docs/loop-3/omnipod.md @@ -28,7 +28,7 @@ The Omnipod Common pairing protocol is the same for all pods. The difference is Graphic below shows the Pair Pod screen for Omnipod (left) and Omnipod DASH (right). -![pair pod screens for Omnipod and Omnipod DASH](img/loop-3-pair-pod-duo.svg){width="500"} +![pair pod screens for Omnipod and Omnipod DASH](img/pair-pod-duo.svg){width="500"} {align="center"} !!! abstract "" @@ -63,13 +63,9 @@ The Screen that says Setup Complete allows you to change the Scheduled Reminder ## Pod Status -The Pod Status screen is shown in the graphic below. The dashed green outline indicates the `Device` portion that is found only for the Omnipod. All other features of the screen are common for Omnipod and Omnipod DASH. There are two versions of the screen below. +The Pod Status screen is shown in the graphic below. The dashed green outline indicates the `Device` portion that is found only for the Omnipod. All other features of the screen are common for Omnipod and Omnipod DASH. If your screen looks different, consider updating to version 3.4 or newer. -* If you are running v3.2.x, your screen looks like the graphic on the left - * You will not have the Silence Pod or Pod Diagnostics features and the Previous Pod details is at the very bottom of the screen -* If you are running v3.4 or later, your screen looks like the graphic on the right - -![consolidated view of the status and command screen for Omnipod or Omnipod DASH pumps](img/loop-3-omnipod-screen.svg){width="250"} ![consolidated view of the status and command screen for Omnipod or Omnipod DASH pumps for 3.4 or later](img/loop-3-4-omnipod-screen.svg){width="250"} +![consolidated view of the status and command screen for Omnipod or Omnipod DASH pumps](img/omnipod-screen.svg){width="250"} {align="center"} ### Play Beeps @@ -135,7 +131,7 @@ When the phone is in portrait mode, so the HUD is visible: * The user is alerted that pump is suspended by the HUD [Pump Status Icon](displays-v3.md#pump-status-icon). -![pump status icon when suspended](img/loop-3-pump-alert-suspended.svg){width="150"} +![pump status icon when suspended](img/pump-alert-suspended.svg){width="150"} {align="center"} * The [HUD Status Row](displays-v3.md#hud-status-row) message can be tapped to resume delivery. @@ -154,7 +150,7 @@ At the end of the reminder time, an alert beep is issued by the pod and a modal * If you do not acknowledge the modal alert, the pod will keep beeping * If you need a silent pod, consider using [Manual Temp Basal](#manual-temp-basal) of 0 U/hr instead of Suspend -![reminder that insulin is suspended](img/loop-3-modal-alert-suspended.svg){width="300"} +![reminder that insulin is suspended](img/modal-alert-suspended.svg){width="300"} {align="center"} !!! danger "Manually Resume Insulin Delivery" @@ -241,7 +237,7 @@ Some additional details for the most recent pod status response message are disp The graphic shows an example for Omnipod on the left, Omnipod DASH (TWI BOARD) in the middle and Omnipod DASH (NXP BLE) on the right. Do not worry about the different board styles (Device Name) for DASH. The developers did that for you. If you are asking for help from a mentor - they may request this information. -![section of Pod Status screen with Pod Details](img/loop-3-omnipod-device-details.svg){width="600"} +![section of Pod Status screen with Pod Details](img/omnipod-device-details.svg){width="600"} {align="center"} #### Previous Pod Details @@ -250,7 +246,7 @@ When you tap on the `Previous Pod Details` row, a graphic similar to those shown If the previous pod had a fault and you choose to report it to Insulet, this screen reports the PDM reference code that Insulet uses in their tracking system. -![previous pod information screen, both for DASH, left was nominal pod and right had a pod fault](img/loop-3-omnipod-previous.svg){width="600"} +![previous pod information screen, both for DASH, left was nominal pod and right had a pod fault](img/omnipod-previous.svg){width="600"} {align="center"} !!! bug "Do Not Call Insulet about -049 (0x31) Faults" @@ -268,7 +264,7 @@ When you tap on the `Replace Pod` row, the `Deactivate Pod` screen, shown below, * This action stops insulin delivery for this pod and cannot be resumed * If you have changed your mind, tap Back or Cancel to continue using the pod -![Deactivate pod screen](img/loop-3-omnipod-deactivate.svg){width="300"} +![Deactivate pod screen](img/omnipod-deactivate.svg){width="300"} {align="center"} @@ -286,7 +282,7 @@ When you tap on the `Notifcation Settings` row, the graphic below is displayed. * Change it after the next pod is paired * Critical Alerts: Information row about which alerts can be silenced by phone settings -![Notification selection screen to set up default reminders](img/loop-3-omnipod-notification.svg){width="300"} +![Notification selection screen to set up default reminders](img/omnipod-notification.svg){width="300"} {align="center"} @@ -300,7 +296,7 @@ When you tap on the `Confidence Reminder` row, the graphic below is displayed. * For automated dosage change, the pod does not beep. * Extended: Automated dosage change beeps, similar to the manual commands when set to `Enabled` -![Confidence reminder selection screen, the current selection is enabled as indicated by the blue check mark](img/loop-3-omnipod-confidence.svg){width="300"} +![Confidence reminder selection screen, the current selection is enabled as indicated by the blue check mark](img/omnipod-confidence.svg){width="300"} {align="center"} ### Silence Pod @@ -359,7 +355,7 @@ When the phone time zone and pump time zone do not match, there is a clock icon * The `Sync to Current Time` row appears * Tap on the `Sync to Current Time` row to choose whether to make Pump Time match Phone Time or not (bottom red rectangle in graphic below) -![graphic showing display when Omnipod pump and phone time do not match](img/loop-3-omnipod-timezone.svg){width="600"} +![graphic showing display when Omnipod pump and phone time do not match](img/omnipod-timezone.svg){width="600"} {align="center"} ### Other Time Changes @@ -368,7 +364,7 @@ What about other time changes? Suppose the iOS -> General -> Time & Date is mod Loop 3 will display this warning modal screen if it detects a problem with the Phone time. It leaves it up the user to decide what action should be taken. To make this warning stop, go to iOS -> General -> Time & Date and enable Set Automatically. -![graphic warning user of a problem with the time on the phone](img/loop-3-omnipod-time-change.svg){width="300"} +![graphic warning user of a problem with the time on the phone](img/omnipod-time-change.svg){width="300"} {align="center"} diff --git a/docs/loop-3/onboarding.md b/docs/loop-3/onboarding.md index b853e38cfb1..b324f4457f0 100644 --- a/docs/loop-3/onboarding.md +++ b/docs/loop-3/onboarding.md @@ -66,7 +66,7 @@ Next, you need to give Loop permission to read and write to Apple Health. In the You need to enable Health Permissions for Loop to work. -![setting up Apple Health permissions with Loop 3](img/health-loop-3.svg){width="750"} +![setting up Apple Health permissions with Loop 3](img/health.svg){width="750"} {align="center"} You can review the permissions screen later. [FAQS: How Do I Modify Apple HealthKit Permissions](../faqs/apple-health-faqs.md#how-do-i-modify-apple-healthkit-permissions). diff --git a/docs/loop-3/services.md b/docs/loop-3/services.md index ed43c268273..5b851016af8 100644 --- a/docs/loop-3/services.md +++ b/docs/loop-3/services.md @@ -8,7 +8,7 @@ Near the bottom of your *Loop* settings screen is a section called "Services". The services are added by tapping on the + sign and choosing the service from the list. Services are shown alphabetically. The most common services are [*Nightscout*](#nightscout) and [Tidepool](#tidepool). -![img/services.JPG](img/loop-3-services.png){width="350"} +![img/services.JPG](img/services.png){width="350"} {align="center"} ## *Nightscout* @@ -35,7 +35,7 @@ The *Loop* app will begin uploading your data from this point on - it does not b However, if there is a temporary outage of internet service or if the *Nightscout* site stops working temporarily, the *Loop* app will fill in all data not uploaded during the outage up to a total of 7 days worth of data. -![steps to add Nightscout to the Loop app](img/loop-3-nightscout-login.svg){width="350"} +![steps to add Nightscout to the Loop app](img/nightscout-login.svg){width="350"} {align="center"} The two most common errors in filling out this section are: @@ -65,7 +65,7 @@ If you want to stop uploading to a given *Nightscout* site or change to a differ The graphic below indicates how to remove your *Nightscout* site from the *Loop* app. This will stop future uploads from the *Loop* app to that site. -![steps to remove Nightscout from the Loop app](img/loop-3-nightscout-logout.png){width="350"} +![steps to remove Nightscout from the Loop app](img/nightscout-logout.png){width="350"} {align="center"} ## *Tidepool* @@ -76,7 +76,7 @@ Please refer to the [LoopTips: Data: *Tidepool*](https://loopkit.github.io/loopt When you add the *Tidepool* Service to *Loop*, be sure to disable *Tidepool* Mobile ability to read from Apple Health. -![img/services.JPG](img/loop-3-tidepool-mobile.png){width="350"} +![img/services.JPG](img/tidepool-mobile.png){width="350"} {align="center"} !!! warning "Double entries" diff --git a/docs/loop-3/settings.md b/docs/loop-3/settings.md index 4d34f5cb7d9..be1128005c4 100644 --- a/docs/loop-3/settings.md +++ b/docs/loop-3/settings.md @@ -2,7 +2,7 @@ The Settings screen is reached by tapping the gear icon in the [Toolbar](displays-v3.md#toolbar) on the [Main Loop Screen](displays-v3.md#main-loop-screen). The graphic below is for Loop 3.4 and later versions. -![settings screen for loop 3](img/loop-3-settings.svg){width="250"} +![settings screen for loop 3](img/settings.svg){width="250"} {align="center"} Each section and row on the Settings screen is described below. @@ -11,7 +11,7 @@ Each section and row on the Settings screen is described below. The user can select closed loop or open loop using this slider. When you first start Loop, we encourage you to leave this slider disabled and become familiar with the app using [Open Loop](../operation/loop/open-loop.md) mode. -![slider to enable or disable closed loop](img/loop-3-setting-loop-mode.svg){width="500"} +![slider to enable or disable closed loop](img/setting-loop-mode.svg){width="500"} {align="center"} **As soon as Closed Loop is enabled, Loop will begin automatic adjustment of insulin dosing. Please ensure the settings you entered are appropriate for the Loop algorithm.** @@ -46,7 +46,7 @@ This row gives you the ability to select Dosing Strategy. The Dosing Strategy on The default (initial) value for this setting is Temp Basal Only. Tap on the arrow to the right to modify your selection. -![Dosing Strategy selection screen](img/loop-3-setting-dosing-strategy.svg){width="500"} +![Dosing Strategy selection screen](img/setting-dosing-strategy.svg){width="500"} {align="center"} !!! quote "Words in Graphic" @@ -184,7 +184,7 @@ The Support section enables the user to provide output data ([Loop Report](#issu The graphic below is similar to what you see when you scroll down to the Support section of the *Loop* Settings screen. -![settings support screen](img/loop-3-setting-support.svg){width="250"} +![settings support screen](img/setting-support.svg){width="250"} {align="center"} ### `Issue Report` @@ -210,7 +210,7 @@ Tap on the `Submit Bug Report` row to bring up one of the two views shown in the In either case, the first action should be to add a term or phrase to the search box (red rectangle) to see if your issue has already been reported and to read the status if it has been reported. Please refer to the [GitHub Issues](../troubleshooting/overview.md#github-issues) section for more information. -![settings support screen when submitting a bug report](img/loop-3-setting-support-bug.svg){width="500"} +![settings support screen when submitting a bug report](img/setting-support-bug.svg){width="500"} {align="center"} ### When Not to Submit a Bug Report diff --git a/docs/loop-3/therapy-settings.md b/docs/loop-3/therapy-settings.md index b9132698bf8..ecac48c6582 100644 --- a/docs/loop-3/therapy-settings.md +++ b/docs/loop-3/therapy-settings.md @@ -44,7 +44,7 @@ Loop will deliver basal and recommend bolus insulin only if your glucose is pred The graphic below shows the information screen presented during onboarding or when user taps the information icon, ⓘ. -![information screen for the glucose safety limit](img/loop-3-therapy-setting-safety-info.svg){width="300"} +![information screen for the glucose safety limit](img/therapy-setting-safety-info.svg){width="300"} {align="center"} The GIF below shows two screens for Glucose Safety Limit. @@ -68,7 +68,7 @@ Your Correction Range is the glucose value (or range of values) that you want Lo The graphic below shows the information screen presented during onboarding or when user taps the information icon, ⓘ. -![information screen for the correction range](img/loop-3-therapy-setting-correction.svg){width="300"} +![information screen for the correction range](img/therapy-setting-correction.svg){width="300"} {align="center"} The GIF below shows four screens when first adding and selecting a correction range. The red box indicates where the user taps. diff --git a/docs/operation/features/bolus.md b/docs/operation/features/bolus.md index 721b18c2f48..04bb794ba05 100644 --- a/docs/operation/features/bolus.md +++ b/docs/operation/features/bolus.md @@ -38,7 +38,7 @@ The graphic below shows the Meal Bolus screen after the user entered carbs and t * **Recommended Bolus** displays what Loop recommends for that proposed **Carb Entry** * **Bolus** default display is what Loop recommends, but user can edit that value -![meal bolus when bolus is recommended on left and not recommended on right](../../loop-3/img/loop-3-meal-bolus-rec.svg){width="900"} +![meal bolus when bolus is recommended on left and not recommended on right](../../loop-3/img/meal-bolus-rec.svg){width="900"} {align="center"} If a CGM entry arrives while in this screen, a **Bolus Recommendation Updated** modal message will be displayed and must be acknowledged. @@ -59,7 +59,7 @@ This section is a continuation of the information presented in the [Accept Recom * This is a common "super-bolus" scenario; in other words, "borrow" basal for the meal bolus to limit post meal spikes * Remember - the **Glucose** prediction is what happens if you **Save and Deliver** and then no further adjustments are made to insulin delivery by Loop -![meal bolus when bolus recommended is decreased on left and increased on right](../../loop-3/img/loop-3-meal-bolus-mod-rec.svg){width="900"} +![meal bolus when bolus recommended is decreased on left and increased on right](../../loop-3/img/meal-bolus-mod-rec.svg){width="900"} {align="center"} ## Manual (or Correction) Bolus @@ -82,7 +82,7 @@ The two graphics below are examples of manual bolus screens. * Alternatively, you can tap the **0** amount in the **Bolus** row and perform the same action as the **Enter Bolus** button * If you do not want to override the recommendation, hit the **Cancel** button at upper left. -![manual bolus when no bolus recommended](../../loop-3/img/loop-3-manual-bolus-no-rec.svg){width="350"} +![manual bolus when no bolus recommended](../../loop-3/img/manual-bolus-no-rec.svg){width="350"} {align="center"} * In the second graphic, a recommended amount is shown @@ -90,7 +90,7 @@ The two graphics below are examples of manual bolus screens. * If you tap on the value on the **Bolus** row, you can override the amount * The amount displayed on the **Bolus** row is modified to 0 U with the first tap - at that point, you may enter a new value or tap **Cancel** using the button at upper left of the screen -![manual bolus when bolus is recommended](../../loop-3/img/loop-3-manual-bolus-rec.svg){width="350"} +![manual bolus when bolus is recommended](../../loop-3/img/manual-bolus-rec.svg){width="350"} {align="center"} ### Recommended Bolus diff --git a/docs/operation/features/notifications.md b/docs/operation/features/notifications.md index 2c428a162b9..2a5ecfcaeac 100644 --- a/docs/operation/features/notifications.md +++ b/docs/operation/features/notifications.md @@ -143,7 +143,7 @@ Select your desired notification level for low reservoir * Loop 3 reports No Insulin on the [Heads-Up-Display](../../loop-3/displays-v3.md#pump-status-icon). -![pump alert - red exclamation point with phrase no insulin](../../loop-3/img/loop-3-pump-alert-no-insulin.svg){width="125"} +![pump alert - red exclamation point with phrase no insulin](../../loop-3/img/pump-alert-no-insulin.svg){width="125"} {align="center"} **Omnipod**