diff --git a/.ddev/config.yaml b/.ddev/config.yaml
new file mode 100644
index 000000000000..33b8c2cfe022
--- /dev/null
+++ b/.ddev/config.yaml
@@ -0,0 +1,263 @@
+name: drupal-webdriver
+type: php
+docroot: ""
+php_version: "8.1"
+webserver_type: nginx-fpm
+xdebug_enabled: false
+additional_hostnames: []
+additional_fqdns: []
+database:
+    type: mariadb
+    version: "10.4"
+use_dns_when_possible: true
+composer_version: "2"
+web_environment: []
+nodejs_version: "18"
+
+# Key features of ddev's config.yaml:
+
+# name: <projectname> # Name of the project, automatically provides
+#   http://projectname.ddev.site and https://projectname.ddev.site
+
+# type: <projecttype>  # drupal6/7/8, backdrop, typo3, wordpress, php
+
+# docroot: <relative_path> # Relative path to the directory containing index.php.
+
+# php_version: "8.1"  # PHP version to use, "5.6", "7.0", "7.1", "7.2", "7.3", "7.4", "8.0", "8.1", "8.2"
+
+# You can explicitly specify the webimage but this
+# is not recommended, as the images are often closely tied to ddev's' behavior,
+# so this can break upgrades.
+
+# webimage: <docker_image>  # nginx/php docker image.
+
+# database:
+#   type: <dbtype> # mysql, mariadb, postgres
+#   version: <version> # database version, like "10.4" or "8.0"
+#   mariadb versions can be 5.5-10.8 and 10.11, mysql versions can be 5.5-8.0
+#   postgres versions can be 9-15.
+
+# router_http_port: <port>  # Port to be used for http (defaults to global configuration, usually 80)
+# router_https_port: <port> # Port for https (defaults to global configuration, usually 443)
+
+# xdebug_enabled: false  # Set to true to enable xdebug and "ddev start" or "ddev restart"
+# Note that for most people the commands
+# "ddev xdebug" to enable xdebug and "ddev xdebug off" to disable it work better,
+# as leaving xdebug enabled all the time is a big performance hit.
+
+# xhprof_enabled: false  # Set to true to enable xhprof and "ddev start" or "ddev restart"
+# Note that for most people the commands
+# "ddev xhprof" to enable xhprof and "ddev xhprof off" to disable it work better,
+# as leaving xhprof enabled all the time is a big performance hit.
+
+# webserver_type: nginx-fpm, apache-fpm, or nginx-gunicorn 
+
+# timezone: Europe/Berlin
+# This is the timezone used in the containers and by PHP;
+# it can be set to any valid timezone,
+# see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
+# For example Europe/Dublin or MST7MDT
+
+# composer_root: <relative_path>
+# Relative path to the composer root directory from the project root. This is
+# the directory which contains the composer.json and where all Composer related
+# commands are executed.
+
+# composer_version: "2"
+# You can set it to "" or "2" (default) for Composer v2 or "1" for Composer v1
+# to use the latest major version available at the time your container is built.
+# It is also possible to use each other Composer version channel. This includes:
+#   - 2.2 (latest Composer LTS version)
+#   - stable
+#   - preview
+#   - snapshot
+# Alternatively, an explicit Composer version may be specified, for example "2.2.18".
+# To reinstall Composer after the image was built, run "ddev debug refresh".
+
+# nodejs_version: "18"
+# change from the default system Node.js version to another supported version, like 14, 16, 18, 20.
+# Note that you can use 'ddev nvm' or nvm inside the web container to provide nearly any
+# Node.js version, including v6, etc.
+
+# additional_hostnames:
+#  - somename
+#  - someothername
+# would provide http and https URLs for "somename.ddev.site"
+# and "someothername.ddev.site".
+
+# additional_fqdns:
+#  - example.com
+#  - sub1.example.com
+# would provide http and https URLs for "example.com" and "sub1.example.com"
+# Please take care with this because it can cause great confusion.
+
+# upload_dirs: "custom/upload/dir"
+#    
+# upload_dirs:
+#   - custom/upload/dir
+#   - ../private
+#
+# would set the destination paths for ddev import-files to <docroot>/custom/upload/dir
+# When mutagen is enabled this path is bind-mounted so that all the files
+# in the upload_dirs don't have to be synced into mutagen.
+
+# disable_upload_dirs_warning: false
+# If true, turns off the normal warning that says
+# "You have Mutagen enabled and your 'php' project type doesn't have upload_dirs set"
+
+# working_dir:
+#   web: /var/www/html
+#   db: /home
+# would set the default working directory for the web and db services.
+# These values specify the destination directory for ddev ssh and the
+# directory in which commands passed into ddev exec are run.
+
+# omit_containers: [db, ddev-ssh-agent]
+# Currently only these containers are supported. Some containers can also be
+# omitted globally in the ~/.ddev/global_config.yaml. Note that if you omit
+# the "db" container, several standard features of ddev that access the
+# database container will be unusable. In the global configuration it is also
+# possible to omit ddev-router, but not here.
+
+# performance_mode: "global"
+# DDEV offers performance optimization strategies to improve the filesystem
+# performance depending on your host system. Should be configured globally.
+#
+# If set, will override the global config. Possible values are:
+#   - "global":  uses the value from the global config.
+#   - "none":    disables performance optimization for this project.
+#   - "mutagen": enables Mutagen for this project.
+#   - "nfs":     enables NFS for this project.
+#
+# See https://ddev.readthedocs.io/en/latest/users/install/performance/#nfs
+# See https://ddev.readthedocs.io/en/latest/users/install/performance/#mutagen
+
+# fail_on_hook_fail: False
+# Decide whether 'ddev start' should be interrupted by a failing hook
+
+# host_https_port: "59002"
+# The host port binding for https can be explicitly specified. It is
+# dynamic unless otherwise specified.
+# This is not used by most people, most people use the *router* instead
+# of the localhost port.
+
+# host_webserver_port: "59001"
+# The host port binding for the ddev-webserver can be explicitly specified. It is
+# dynamic unless otherwise specified.
+# This is not used by most people, most people use the *router* instead
+# of the localhost port.
+
+# host_db_port: "59002"
+# The host port binding for the ddev-dbserver can be explicitly specified. It is dynamic
+# unless explicitly specified.
+
+# mailhog_port: "8025"
+# mailhog_https_port: "8026"
+# The MailHog ports can be changed from the default 8025 and 8026
+
+# host_mailhog_port: "8025"
+# The mailhog port is not normally bound on the host at all, instead being routed
+# through ddev-router, but it can be bound directly to localhost if specified here.
+
+# webimage_extra_packages: [php7.4-tidy, php-bcmath]
+# Extra Debian packages that are needed in the webimage can be added here
+
+# dbimage_extra_packages: [telnet,netcat]
+# Extra Debian packages that are needed in the dbimage can be added here
+
+# use_dns_when_possible: true
+# If the host has internet access and the domain configured can
+# successfully be looked up, DNS will be used for hostname resolution
+# instead of editing /etc/hosts
+# Defaults to true
+
+# project_tld: ddev.site
+# The top-level domain used for project URLs
+# The default "ddev.site" allows DNS lookup via a wildcard
+# If you prefer you can change this to "ddev.local" to preserve
+# pre-v1.9 behavior.
+
+# ngrok_args: --basic-auth username:pass1234
+# Provide extra flags to the "ngrok http" command, see
+# https://ngrok.com/docs/ngrok-agent/config or run "ngrok http -h"
+
+# disable_settings_management: false
+# If true, ddev will not create CMS-specific settings files like
+# Drupal's settings.php/settings.ddev.php or TYPO3's AdditionalConfiguration.php
+# In this case the user must provide all such settings.
+
+# You can inject environment variables into the web container with:
+# web_environment:
+# - SOMEENV=somevalue
+# - SOMEOTHERENV=someothervalue
+
+# no_project_mount: false
+# (Experimental) If true, ddev will not mount the project into the web container;
+# the user is responsible for mounting it manually or via a script.
+# This is to enable experimentation with alternate file mounting strategies.
+# For advanced users only!
+
+# bind_all_interfaces: false
+# If true, host ports will be bound on all network interfaces,
+# not just the localhost interface. This means that ports
+# will be available on the local network if the host firewall
+# allows it.
+
+# default_container_timeout: 120
+# The default time that ddev waits for all containers to become ready can be increased from
+# the default 120. This helps in importing huge databases, for example.
+
+#web_extra_exposed_ports:
+#- name: nodejs
+#  container_port: 3000
+#  http_port: 2999
+#  https_port: 3000
+#- name: something
+#  container_port: 4000
+#  https_port: 4000
+#  http_port: 3999
+# Allows a set of extra ports to be exposed via ddev-router
+# Fill in all three fields even if you don’t intend to use the https_port!
+# If you don’t add https_port, then it defaults to 0 and ddev-router will fail to start.
+#
+# The port behavior on the ddev-webserver must be arranged separately, for example
+# using web_extra_daemons.
+# For example, with a web app on port 3000 inside the container, this config would
+# expose that web app on https://<project>.ddev.site:9999 and http://<project>.ddev.site:9998
+# web_extra_exposed_ports:
+#  - name: myapp
+#    container_port: 3000
+#    http_port: 9998
+#    https_port: 9999
+
+#web_extra_daemons:
+#- name: "http-1"
+#  command: "/var/www/html/node_modules/.bin/http-server -p 3000"
+#  directory: /var/www/html
+#- name: "http-2"
+#  command: "/var/www/html/node_modules/.bin/http-server /var/www/html/sub -p 3000"
+#  directory: /var/www/html
+
+# override_config: false
+# By default, config.*.yaml files are *merged* into the configuration
+# But this means that some things can't be overridden
+# For example, if you have 'nfs_mount_enabled: true'' you can't override it with a merge
+# and you can't erase existing hooks or all environment variables.
+# However, with "override_config: true" in a particular config.*.yaml file,
+# 'nfs_mount_enabled: false' can override the existing values, and
+# hooks:
+#   post-start: []
+# or
+# web_environment: []
+# or
+# additional_hostnames: []
+# can have their intended affect. 'override_config' affects only behavior of the
+# config.*.yaml file it exists in.
+
+# Many ddev commands can be extended to run tasks before or after the
+# ddev command is executed, for example "post-start", "post-import-db",
+# "pre-composer", "post-composer"
+# See https://ddev.readthedocs.io/en/stable/users/extend/custom-commands/ for more
+# information on the commands that can be extended and the tasks you can define
+# for them. Example:
+#hooks:
diff --git a/.ddev/docker-compose.selenium.yaml b/.ddev/docker-compose.selenium.yaml
new file mode 100644
index 000000000000..7ebde33fa6f9
--- /dev/null
+++ b/.ddev/docker-compose.selenium.yaml
@@ -0,0 +1,23 @@
+version: '3.6'
+
+services:
+  chrome:
+    container_name: ddev-${DDEV_SITENAME}-chrome
+    image: seleniarm/standalone-chromium:4.1.2-20220227
+    labels:
+      com.ddev.site-name: ${DDEV_SITENAME}
+      com.ddev.approot: $DDEV_APPROOT
+    shm_size: 2gb
+    expose:
+      - 7900
+    environment:
+      - VIRTUAL_HOST=$DDEV_HOSTNAME
+      - HTTPS_EXPOSE=7900:7900
+      - HTTP_EXPOSE=7910:7900
+    links:
+      - web:web
+    external_links:
+      - ddev-router:${DDEV_SITENAME}.${DDEV_TLD}
+    volumes:
+      - ".:/mnt/ddev_config:ro"
+      - ddev-global-cache:/mnt/ddev-global-cache
diff --git a/.github/workflows/Tests.yml b/.github/workflows/Tests.yml
new file mode 100644
index 000000000000..a786a1ac4cbb
--- /dev/null
+++ b/.github/workflows/Tests.yml
@@ -0,0 +1,37 @@
+name: Tests
+
+on:
+  push:
+    branches:
+      - main
+  pull_request:
+    types: [opened, synchronize, reopened]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+jobs:
+  Functional-JavaScript:
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v3
+
+      - uses: ddev/github-action-setup-ddev@v1
+
+      - name: Install dependencies
+        run: ddev composer install
+
+      - name: Configure tests
+        run: cp .github/workflows/phpunit.xml core/phpunit.xml
+
+      - name: Run tests
+        run: ddev exec php ./core/scripts/run-tests.sh --color --keep-results --types "PHPUnit-FunctionalJavascript" --concurrency "4" --repeat "1" --sqlite "./sites/default/files/.sqlite" --verbose --non-html --all
+
+      - name: Upload test artifacts
+        if: ${{ always() }}
+        uses: actions/upload-artifact@v3
+        with:
+          name: browser_output
+          path: sites/simpletest/browser_output
diff --git a/.github/workflows/phpunit.xml b/.github/workflows/phpunit.xml
new file mode 100644
index 000000000000..cc4b8cde45a4
--- /dev/null
+++ b/.github/workflows/phpunit.xml
@@ -0,0 +1,105 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!-- For how to customize PHPUnit configuration, see core/tests/README.md. -->
+<!-- TODO set checkForUnintentionallyCoveredCode="true" once https://www.drupal.org/node/2626832 is resolved. -->
+<!-- PHPUnit expects functional tests to be run with either a privileged user
+ or your current system user. See core/tests/README.md and
+ https://www.drupal.org/node/2116263 for details.
+-->
+<phpunit xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+         bootstrap="tests/bootstrap.php" colors="true"
+         beStrictAboutTestsThatDoNotTestAnything="true"
+         beStrictAboutOutputDuringTests="true"
+         beStrictAboutChangesToGlobalState="true"
+         failOnWarning="true"
+         printerClass="\Drupal\Tests\Listeners\HtmlOutputPrinter"
+         cacheResult="false"
+         xsi:noNamespaceSchemaLocation="https://schema.phpunit.de/9.3/phpunit.xsd">
+  <php>
+    <!-- Set error reporting to E_ALL. -->
+    <ini name="error_reporting" value="32767"/>
+    <!-- Do not limit the amount of memory tests take to run. -->
+    <ini name="memory_limit" value="-1"/>
+    <!-- Example SIMPLETEST_BASE_URL value: http://localhost -->
+    <env name="SIMPLETEST_BASE_URL" value="http://drupal-webdriver.ddev.site"/>
+    <!-- Example SIMPLETEST_DB value: mysql://username:password@localhost/databasename#table_prefix -->
+    <env name="SIMPLETEST_DB" value="mysql://db:db@db/db"/>
+    <!-- Example BROWSERTEST_OUTPUT_DIRECTORY value: /path/to/webroot/sites/simpletest/browser_output -->
+    <env name="BROWSERTEST_OUTPUT_DIRECTORY" value="/var/www/html/sites/simpletest/browser_output"/>
+    <!-- By default, browser tests will output links that use the base URL set
+     in SIMPLETEST_BASE_URL. However, if your SIMPLETEST_BASE_URL is an internal
+     path (such as may be the case in a virtual or Docker-based environment),
+     you can set the base URL used in the browser test output links to something
+     reachable from your host machine here. This will allow you to follow them
+     directly and view the output. -->
+    <env name="BROWSERTEST_OUTPUT_BASE_URL" value=""/>
+
+    <!-- Deprecation testing is managed through Symfony's PHPUnit Bridge.
+      The environment variable SYMFONY_DEPRECATIONS_HELPER is used to configure
+      the behaviour of the deprecation tests.
+      See https://symfony.com/doc/current/components/phpunit_bridge.html#configuration
+      Drupal core's testing framework is setting this variable to its defaults.
+      Projects with their own requirements need to manage this variable
+      explicitly.
+    -->
+    <!-- To disable deprecation testing completely uncomment the next line. -->
+    <!-- <env name="SYMFONY_DEPRECATIONS_HELPER" value="disabled"/> -->
+    <!-- Deprecation errors can be selectively ignored by specifying a file of
+      regular expression patterns for exclusion.
+      See https://symfony.com/doc/current/components/phpunit_bridge.html#ignoring-deprecations
+      Uncomment the line below to specify a custom deprecations ignore file.
+      NOTE: it may be required to specify the full path to the file to run tests
+      correctly.
+    -->
+    <!-- <env name="SYMFONY_DEPRECATIONS_HELPER" value="ignoreFile=.deprecation-ignore.txt"/> -->
+
+    <!-- Example for changing the driver class for mink tests MINK_DRIVER_CLASS value: 'Drupal\FunctionalJavascriptTests\DrupalSelenium2Driver' -->
+    <env name="MINK_DRIVER_CLASS" value=''/>
+    <!-- Example for changing the driver args to mink tests MINK_DRIVER_ARGS value: '["http://127.0.0.1:8510"]' -->
+    <env name="MINK_DRIVER_ARGS" value='["chrome", {"browserName":"chrome", "goog:chromeOptions":{"args":["--no-sandbox","--ignore-certificate-errors", "--allow-insecure-localhost"]}}, "http://chrome:4444"]'/>
+    <!-- Example for changing the driver args to webdriver tests MINK_DRIVER_ARGS_WEBDRIVER value: '["chrome", { "chromeOptions": { "w3c": false } }, "http://localhost:4444/wd/hub"]' For using the Firefox browser, replace "chrome" with "firefox" -->
+    <env name="MINK_DRIVER_ARGS_WEBDRIVER" value='["chrome", {"browserName":"chrome", "goog:chromeOptions":{"args":["--no-sandbox","--ignore-certificate-errors", "--allow-insecure-localhost"]}}, "http://chrome:4444"]'/>
+  </php>
+  <testsuites>
+    <testsuite name="unit">
+      <file>./tests/TestSuites/UnitTestSuite.php</file>
+    </testsuite>
+    <testsuite name="kernel">
+      <file>./tests/TestSuites/KernelTestSuite.php</file>
+    </testsuite>
+    <testsuite name="functional">
+      <file>./tests/TestSuites/FunctionalTestSuite.php</file>
+    </testsuite>
+    <testsuite name="functional-javascript">
+      <file>./tests/TestSuites/FunctionalJavascriptTestSuite.php</file>
+    </testsuite>
+    <testsuite name="build">
+      <file>./tests/TestSuites/BuildTestSuite.php</file>
+    </testsuite>
+  </testsuites>
+  <listeners>
+    <listener class="\Drupal\Tests\Listeners\DrupalListener">
+    </listener>
+  </listeners>
+  <!-- Settings for coverage reports. -->
+  <coverage>
+    <include>
+      <directory>./includes</directory>
+      <directory>./lib</directory>
+      <directory>./modules</directory>
+      <directory>../modules</directory>
+      <directory>../sites</directory>
+    </include>
+    <exclude>
+      <directory>./modules/*/src/Tests</directory>
+      <directory>./modules/*/tests</directory>
+      <directory>../modules/*/src/Tests</directory>
+      <directory>../modules/*/tests</directory>
+      <directory>../modules/*/*/src/Tests</directory>
+      <directory>../modules/*/*/tests</directory>
+      <directory suffix=".api.php">./lib/**</directory>
+      <directory suffix=".api.php">./modules/**</directory>
+      <directory suffix=".api.php">../modules/**</directory>
+    </exclude>
+  </coverage>
+</phpunit>
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 000000000000..bbe21ffb2a9c
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,3 @@
+/vendor
+/sites/default/files
+/sites/simpletest
diff --git a/composer.json b/composer.json
index 4a8438802647..cba388f53f35 100644
--- a/composer.json
+++ b/composer.json
@@ -17,7 +17,7 @@
     "require-dev": {
         "behat/mink": "^1.10",
         "behat/mink-browserkit-driver": "^2.1",
-        "behat/mink-selenium2-driver": "^1.4",
+        "behat/mink-selenium2-driver": "dev-w3c-compat",
         "colinodell/psr-testlogger": "^1.2",
         "composer/composer": "^2.4",
         "drupal/coder": "^8.3.10",
@@ -121,6 +121,10 @@
         "phpcbf": "phpcbf --standard=core/phpcs.xml.dist --parallel=$(nproc) --"
     },
     "repositories": [
+        {
+            "type": "vcs",
+            "url": "https://github.com/Lullabot/MinkSelenium2Driver"
+        },
         {
             "type": "path",
             "url": "core"
diff --git a/composer.lock b/composer.lock
index 43eb39a75138..e000b5598be7 100644
--- a/composer.lock
+++ b/composer.lock
@@ -4,7 +4,7 @@
         "Read more about it at https://getcomposer.org/doc/01-basic-usage.md#installing-dependencies",
         "This file is @generated automatically"
     ],
-    "content-hash": "bfd416e5a3556fed83f84928cf81fa18",
+    "content-hash": "08eb7490111bc0f0461e809135f110a1",
     "packages": [
         {
             "name": "asm89/stack-cors",
@@ -491,7 +491,7 @@
         },
         {
             "name": "drupal/core",
-            "version": "11.x-dev",
+            "version": "dev-main",
             "dist": {
                 "type": "path",
                 "url": "core",
@@ -648,7 +648,7 @@
         },
         {
             "name": "drupal/core-project-message",
-            "version": "11.x-dev",
+            "version": "dev-main",
             "dist": {
                 "type": "path",
                 "url": "composer/Plugin/ProjectMessage",
@@ -681,7 +681,7 @@
         },
         {
             "name": "drupal/core-vendor-hardening",
-            "version": "11.x-dev",
+            "version": "dev-main",
             "dist": {
                 "type": "path",
                 "url": "composer/Plugin/VendorHardening",
@@ -4216,26 +4216,28 @@
     "packages-dev": [
         {
             "name": "behat/mink",
-            "version": "v1.10.0",
+            "version": "dev-master",
             "source": {
                 "type": "git",
                 "url": "https://github.com/minkphp/Mink.git",
-                "reference": "19e58905632e7cfdc5b2bafb9b950a3521af32c5"
+                "reference": "9e4feb98518a4baeeaefd2e93963558e1ca3f8a4"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/minkphp/Mink/zipball/19e58905632e7cfdc5b2bafb9b950a3521af32c5",
-                "reference": "19e58905632e7cfdc5b2bafb9b950a3521af32c5",
+                "url": "https://api.github.com/repos/minkphp/Mink/zipball/9e4feb98518a4baeeaefd2e93963558e1ca3f8a4",
+                "reference": "9e4feb98518a4baeeaefd2e93963558e1ca3f8a4",
                 "shasum": ""
             },
             "require": {
                 "php": ">=7.2",
-                "symfony/css-selector": "^4.4 || ^5.0 || ^6.0"
+                "symfony/css-selector": "^4.4 || ^5.0 || ^6.0 || ^7.0"
             },
             "require-dev": {
+                "phpstan/phpstan": "^1.10",
+                "phpstan/phpstan-phpunit": "^1.3",
                 "phpunit/phpunit": "^8.5.22 || ^9.5.11",
-                "symfony/error-handler": "^4.4 || ^5.0 || ^6.0",
-                "symfony/phpunit-bridge": "^5.4 || ^6.0"
+                "symfony/error-handler": "^4.4 || ^5.0 || ^6.0 || ^7.0",
+                "symfony/phpunit-bridge": "^5.4 || ^6.0 || ^7.0"
             },
             "suggest": {
                 "behat/mink-browserkit-driver": "fast headless driver for any app without JS emulation",
@@ -4243,6 +4245,7 @@
                 "behat/mink-zombie-driver": "fast and JS-enabled headless driver for any app (requires node.js)",
                 "dmore/chrome-mink-driver": "fast and JS-enabled driver for any app (requires chromium or google chrome)"
             },
+            "default-branch": true,
             "type": "library",
             "extra": {
                 "branch-alias": {
@@ -4274,9 +4277,9 @@
             ],
             "support": {
                 "issues": "https://github.com/minkphp/Mink/issues",
-                "source": "https://github.com/minkphp/Mink/tree/v1.10.0"
+                "source": "https://github.com/minkphp/Mink/tree/master"
             },
-            "time": "2022-03-28T14:22:43+00:00"
+            "time": "2023-09-26T16:13:14+00:00"
         },
         {
             "name": "behat/mink-browserkit-driver",
@@ -4345,26 +4348,28 @@
         },
         {
             "name": "behat/mink-selenium2-driver",
-            "version": "v1.6.0",
+            "version": "dev-w3c-compat",
             "source": {
                 "type": "git",
-                "url": "https://github.com/minkphp/MinkSelenium2Driver.git",
-                "reference": "e5f8421654930da725499fb92983e6948c6f973e"
+                "url": "https://github.com/Lullabot/MinkSelenium2Driver.git",
+                "reference": "cb196ef320fa7c4d68accf0e5adb37f6dcf0d982"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/minkphp/MinkSelenium2Driver/zipball/e5f8421654930da725499fb92983e6948c6f973e",
-                "reference": "e5f8421654930da725499fb92983e6948c6f973e",
+                "url": "https://api.github.com/repos/Lullabot/MinkSelenium2Driver/zipball/cb196ef320fa7c4d68accf0e5adb37f6dcf0d982",
+                "reference": "cb196ef320fa7c4d68accf0e5adb37f6dcf0d982",
                 "shasum": ""
             },
             "require": {
-                "behat/mink": "^1.9@dev",
+                "behat/mink": "^1.11@dev",
                 "ext-json": "*",
-                "instaclick/php-webdriver": "^1.4",
+                "instaclick/php-webdriver": "^1.4.14",
                 "php": ">=7.2"
             },
             "require-dev": {
                 "mink/driver-testsuite": "dev-master",
+                "phpstan/phpstan": "^1.10",
+                "phpstan/phpstan-phpunit": "^1.3",
                 "phpunit/phpunit": "^8.5.22 || ^9.5.11",
                 "symfony/error-handler": "^4.4 || ^5.0"
             },
@@ -4379,7 +4384,11 @@
                     "Behat\\Mink\\Driver\\": "src/"
                 }
             },
-            "notification-url": "https://packagist.org/downloads/",
+            "autoload-dev": {
+                "psr-4": {
+                    "Behat\\Mink\\Tests\\Driver\\": "tests"
+                }
+            },
             "license": [
                 "MIT"
             ],
@@ -4406,10 +4415,9 @@
                 "webdriver"
             ],
             "support": {
-                "issues": "https://github.com/minkphp/MinkSelenium2Driver/issues",
-                "source": "https://github.com/minkphp/MinkSelenium2Driver/tree/v1.6.0"
+                "source": "https://github.com/Lullabot/MinkSelenium2Driver/tree/w3c-compat"
             },
-            "time": "2022-03-28T14:55:17+00:00"
+            "time": "2023-10-03T12:07:03+00:00"
         },
         {
             "name": "colinodell/psr-testlogger",
@@ -8801,16 +8809,16 @@
         },
         {
             "name": "symfony/css-selector",
-            "version": "v6.3.0",
+            "version": "v6.3.2",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/css-selector.git",
-                "reference": "88453e64cd86c5b60e8d2fb2c6f953bbc353ffbf"
+                "reference": "883d961421ab1709877c10ac99451632a3d6fa57"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/css-selector/zipball/88453e64cd86c5b60e8d2fb2c6f953bbc353ffbf",
-                "reference": "88453e64cd86c5b60e8d2fb2c6f953bbc353ffbf",
+                "url": "https://api.github.com/repos/symfony/css-selector/zipball/883d961421ab1709877c10ac99451632a3d6fa57",
+                "reference": "883d961421ab1709877c10ac99451632a3d6fa57",
                 "shasum": ""
             },
             "require": {
@@ -8846,7 +8854,7 @@
             "description": "Converts CSS selectors to XPath expressions",
             "homepage": "https://symfony.com",
             "support": {
-                "source": "https://github.com/symfony/css-selector/tree/v6.3.0"
+                "source": "https://github.com/symfony/css-selector/tree/v6.3.2"
             },
             "funding": [
                 {
@@ -8862,7 +8870,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2023-03-20T16:43:42+00:00"
+            "time": "2023-07-12T16:00:22+00:00"
         },
         {
             "name": "symfony/dom-crawler",
@@ -9456,6 +9464,7 @@
         "drupal/core": 20,
         "drupal/core-project-message": 20,
         "drupal/core-vendor-hardening": 20,
+        "behat/mink-selenium2-driver": 20,
         "open-telemetry/exporter-otlp": 10,
         "open-telemetry/sdk": 10
     },
@@ -9466,5 +9475,5 @@
     "platform-overrides": {
         "php": "8.1.0"
     },
-    "plugin-api-version": "2.3.0"
+    "plugin-api-version": "2.6.0"
 }
diff --git a/composer/Metapackage/DevDependencies/composer.json b/composer/Metapackage/DevDependencies/composer.json
index 0efa90a95077..0a42b6f70592 100644
--- a/composer/Metapackage/DevDependencies/composer.json
+++ b/composer/Metapackage/DevDependencies/composer.json
@@ -9,7 +9,7 @@
     "require": {
         "behat/mink": "^1.10",
         "behat/mink-browserkit-driver": "^2.1",
-        "behat/mink-selenium2-driver": "^1.4",
+        "behat/mink-selenium2-driver": "dev-w3c-compat",
         "colinodell/psr-testlogger": "^1.2",
         "composer/composer": "^2.4",
         "drupal/coder": "^8.3.10",
diff --git a/composer/Metapackage/PinnedDevDependencies/composer.json b/composer/Metapackage/PinnedDevDependencies/composer.json
index 08e7a0547a5b..51315951f27b 100644
--- a/composer/Metapackage/PinnedDevDependencies/composer.json
+++ b/composer/Metapackage/PinnedDevDependencies/composer.json
@@ -8,9 +8,9 @@
     },
     "require": {
         "drupal/core": "11.x-dev",
-        "behat/mink": "v1.10.0",
+        "behat/mink": "dev-master",
         "behat/mink-browserkit-driver": "v2.1.0",
-        "behat/mink-selenium2-driver": "v1.6.0",
+        "behat/mink-selenium2-driver": "dev-w3c-compat",
         "colinodell/psr-testlogger": "v1.2.0",
         "composer/ca-bundle": "1.3.6",
         "composer/class-map-generator": "1.0.0",
@@ -81,7 +81,7 @@
         "slevomat/coding-standard": "8.12.1",
         "squizlabs/php_codesniffer": "3.7.2",
         "symfony/browser-kit": "v6.3.0",
-        "symfony/css-selector": "v6.3.0",
+        "symfony/css-selector": "v6.3.2",
         "symfony/dom-crawler": "v6.3.0",
         "symfony/filesystem": "v6.3.0",
         "symfony/finder": "v6.3.0",
diff --git a/core/tests/Drupal/FunctionalJavascriptTests/WebDriverCurlService.php b/core/tests/Drupal/FunctionalJavascriptTests/WebDriverCurlService.php
index 9a8eb4a4ae94..7facc284f2d8 100644
--- a/core/tests/Drupal/FunctionalJavascriptTests/WebDriverCurlService.php
+++ b/core/tests/Drupal/FunctionalJavascriptTests/WebDriverCurlService.php
@@ -67,7 +67,8 @@ public function execute($requestMethod, $url, $parameters = NULL, $extraOptions
               curl_setopt($curl, CURLOPT_POSTFIELDS, json_encode($parameters));
             }
             else {
-              $customHeaders[] = 'Content-Length: 0';
+              curl_setopt($curl, CURLOPT_POSTFIELDS, "{}");
+              $customHeaders[] = 'Content-Length: 2';
 
               // Suppress "Transfer-Encoding: chunked" header automatically
               // added by cURL that causes a 400 bad request (bad
@@ -92,7 +93,8 @@ public function execute($requestMethod, $url, $parameters = NULL, $extraOptions
               curl_setopt($curl, CURLOPT_POSTFIELDS, json_encode($parameters));
             }
             else {
-              $customHeaders[] = 'Content-Length: 0';
+              curl_setopt($curl, CURLOPT_POSTFIELDS, "{}");
+              $customHeaders[] = 'Content-Length: 2';
 
               // Suppress "Transfer-Encoding: chunked" header automatically
               // added by cURL that causes a 400 bad request (bad
diff --git a/sites/default/settings.ddev.php b/sites/default/settings.ddev.php
new file mode 100644
index 000000000000..a494556c6887
--- /dev/null
+++ b/sites/default/settings.ddev.php
@@ -0,0 +1,55 @@
+<?php
+
+/**
+ * @file
+ * #ddev-generated: Automatically generated Drupal settings file.
+ * ddev manages this file and may delete or overwrite the file unless this
+ * comment is removed.  It is recommended that you leave this file alone.
+ */
+
+$host = "db";
+$port = 3306;
+$driver = "mysql";
+
+// If DDEV_PHP_VERSION is not set but IS_DDEV_PROJECT *is*, it means we're running (drush) on the host,
+// so use the host-side bind port on docker IP
+if (empty(getenv('DDEV_PHP_VERSION') && getenv('IS_DDEV_PROJECT') == 'true')) {
+  $host = "127.0.0.1";
+  $port = 32820;
+}
+
+$databases['default']['default']['database'] = "db";
+$databases['default']['default']['username'] = "db";
+$databases['default']['default']['password'] = "db";
+$databases['default']['default']['host'] = $host;
+$databases['default']['default']['driver'] = $driver;
+$databases['default']['default']['port'] = $port;
+
+$settings['hash_salt'] = 'HrxZRpNAlthfobUqshfxGcpJlzncMhqsDOxTksWmnhhPDyvCTnhalVHCizGuWjpR';
+
+// This will prevent Drupal from setting read-only permissions on sites/default.
+$settings['skip_permissions_hardening'] = TRUE;
+
+// This will ensure the site can only be accessed through the intended host
+// names. Additional host patterns can be added for custom configurations.
+$settings['trusted_host_patterns'] = ['.*'];
+
+// Don't use Symfony's APCLoader. ddev includes APCu; Composer's APCu loader has
+// better performance.
+$settings['class_loader_auto_detect'] = FALSE;
+
+// Set $settings['config_sync_directory'] if not set in settings.php.
+if (empty($settings['config_sync_directory'])) {
+  $settings['config_sync_directory'] = 'sites/default/files/sync';
+}
+
+// Override drupal/symfony_mailer default config to use Mailhog
+$config['symfony_mailer.mailer_transport.sendmail']['plugin'] = 'smtp';
+$config['symfony_mailer.mailer_transport.sendmail']['configuration']['user']='';
+$config['symfony_mailer.mailer_transport.sendmail']['configuration']['pass']='';
+$config['symfony_mailer.mailer_transport.sendmail']['configuration']['host']='localhost';
+$config['symfony_mailer.mailer_transport.sendmail']['configuration']['port']='1025';
+
+// Enable verbose logging for errors.
+// https://www.drupal.org/forum/support/post-installation/2018-07-18/enable-drupal-8-backend-errorlogdebugging-mode
+$config['system.logging']['error_level'] = 'verbose';
diff --git a/sites/default/settings.php b/sites/default/settings.php
new file mode 100644
index 000000000000..445e4c96e573
--- /dev/null
+++ b/sites/default/settings.php
@@ -0,0 +1,898 @@
+<?php
+
+// phpcs:ignoreFile
+
+/**
+ * @file
+ * Drupal site-specific configuration file.
+ *
+ * IMPORTANT NOTE:
+ * This file may have been set to read-only by the Drupal installation program.
+ * If you make changes to this file, be sure to protect it again after making
+ * your modifications. Failure to remove write permissions to this file is a
+ * security risk.
+ *
+ * In order to use the selection rules below the multisite aliasing file named
+ * sites/sites.php must be present. Its optional settings will be loaded, and
+ * the aliases in the array $sites will override the default directory rules
+ * below. See sites/example.sites.php for more information about aliases.
+ *
+ * The configuration directory will be discovered by stripping the website's
+ * hostname from left to right and pathname from right to left. The first
+ * configuration file found will be used and any others will be ignored. If no
+ * other configuration file is found then the default configuration file at
+ * 'sites/default' will be used.
+ *
+ * For example, for a fictitious site installed at
+ * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched
+ * for in the following directories:
+ *
+ * - sites/8080.www.drupal.org.mysite.test
+ * - sites/www.drupal.org.mysite.test
+ * - sites/drupal.org.mysite.test
+ * - sites/org.mysite.test
+ *
+ * - sites/8080.www.drupal.org.mysite
+ * - sites/www.drupal.org.mysite
+ * - sites/drupal.org.mysite
+ * - sites/org.mysite
+ *
+ * - sites/8080.www.drupal.org
+ * - sites/www.drupal.org
+ * - sites/drupal.org
+ * - sites/org
+ *
+ * - sites/default
+ *
+ * Note that if you are installing on a non-standard port number, prefix the
+ * hostname with that number. For example,
+ * https://www.drupal.org:8080/mysite/test/ could be loaded from
+ * sites/8080.www.drupal.org.mysite.test/.
+ *
+ * @see example.sites.php
+ * @see \Drupal\Core\DrupalKernel::getSitePath()
+ *
+ * In addition to customizing application settings through variables in
+ * settings.php, you can create a services.yml file in the same directory to
+ * register custom, site-specific service definitions and/or swap out default
+ * implementations with custom ones.
+ */
+
+/**
+ * Database settings:
+ *
+ * The $databases array specifies the database connection or
+ * connections that Drupal may use.  Drupal is able to connect
+ * to multiple databases, including multiple types of databases,
+ * during the same request.
+ *
+ * One example of the simplest connection array is shown below. To use the
+ * sample settings, copy and uncomment the code below between the @code and
+ * @endcode lines and paste it after the $databases declaration. You will need
+ * to replace the database username and password and possibly the host and port
+ * with the appropriate credentials for your database system.
+ *
+ * The next section describes how to customize the $databases array for more
+ * specific needs.
+ *
+ * @code
+ * $databases['default']['default'] = [
+ *   'database' => 'databasename',
+ *   'username' => 'sqlusername',
+ *   'password' => 'sqlpassword',
+ *   'host' => 'localhost',
+ *   'port' => '3306',
+ *   'driver' => 'mysql',
+ *   'prefix' => '',
+ *   'collation' => 'utf8mb4_general_ci',
+ * ];
+ * @endcode
+ */
+$databases = [];
+
+/**
+ * Customizing database settings.
+ *
+ * Many of the values of the $databases array can be customized for your
+ * particular database system. Refer to the sample in the section above as a
+ * starting point.
+ *
+ * The "driver" property indicates what Drupal database driver the
+ * connection should use.  This is usually the same as the name of the
+ * database type, such as mysql or sqlite, but not always.  The other
+ * properties will vary depending on the driver.  For SQLite, you must
+ * specify a database file name in a directory that is writable by the
+ * webserver.  For most other drivers, you must specify a
+ * username, password, host, and database name.
+ *
+ * Drupal core implements drivers for mysql, pgsql, and sqlite. Other drivers
+ * can be provided by contributed or custom modules. To use a contributed or
+ * custom driver, the "namespace" property must be set to the namespace of the
+ * driver. The code in this namespace must be autoloadable prior to connecting
+ * to the database, and therefore, prior to when module root namespaces are
+ * added to the autoloader. To add the driver's namespace to the autoloader,
+ * set the "autoload" property to the PSR-4 base directory of the driver's
+ * namespace. This is optional for projects managed with Composer if the
+ * driver's namespace is in Composer's autoloader.
+ *
+ * For each database, you may optionally specify multiple "target" databases.
+ * A target database allows Drupal to try to send certain queries to a
+ * different database if it can but fall back to the default connection if not.
+ * That is useful for primary/replica replication, as Drupal may try to connect
+ * to a replica server when appropriate and if one is not available will simply
+ * fall back to the single primary server (The terms primary/replica are
+ * traditionally referred to as master/slave in database server documentation).
+ *
+ * The general format for the $databases array is as follows:
+ * @code
+ * $databases['default']['default'] = $info_array;
+ * $databases['default']['replica'][] = $info_array;
+ * $databases['default']['replica'][] = $info_array;
+ * $databases['extra']['default'] = $info_array;
+ * @endcode
+ *
+ * In the above example, $info_array is an array of settings described above.
+ * The first line sets a "default" database that has one primary database
+ * (the second level default).  The second and third lines create an array
+ * of potential replica databases.  Drupal will select one at random for a given
+ * request as needed.  The fourth line creates a new database with a name of
+ * "extra".
+ *
+ * For MySQL, MariaDB or equivalent databases the 'isolation_level' option can
+ * be set. The recommended transaction isolation level for Drupal sites is
+ * 'READ COMMITTED'. The 'REPEATABLE READ' option is supported but can result
+ * in deadlocks, the other two options are 'READ UNCOMMITTED' and 'SERIALIZABLE'.
+ * They are available but not supported; use them at your own risk. For more
+ * info:
+ * https://dev.mysql.com/doc/refman/5.7/en/innodb-transaction-isolation-levels.html
+ *
+ * On your settings.php, change the isolation level:
+ * @code
+ * $databases['default']['default']['init_commands'] = [
+ *   'isolation_level' => 'SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED',
+ * ];
+ * @endcode
+ *
+ * You can optionally set a prefix for all database table names by using the
+ * 'prefix' setting. If a prefix is specified, the table name will be prepended
+ * with its value. Be sure to use valid database characters only, usually
+ * alphanumeric and underscore. If no prefix is desired, do not set the 'prefix'
+ * key or set its value to an empty string ''.
+ *
+ * For example, to have all database table prefixed with 'main_', set:
+ * @code
+ *   'prefix' => 'main_',
+ * @endcode
+ *
+ * Advanced users can add or override initial commands to execute when
+ * connecting to the database server, as well as PDO connection settings. For
+ * example, to enable MySQL SELECT queries to exceed the max_join_size system
+ * variable, and to reduce the database connection timeout to 5 seconds:
+ * @code
+ * $databases['default']['default'] = [
+ *   'init_commands' => [
+ *     'big_selects' => 'SET SQL_BIG_SELECTS=1',
+ *   ],
+ *   'pdo' => [
+ *     PDO::ATTR_TIMEOUT => 5,
+ *   ],
+ * ];
+ * @endcode
+ *
+ * WARNING: The above defaults are designed for database portability. Changing
+ * them may cause unexpected behavior, including potential data loss. See
+ * https://www.drupal.org/developing/api/database/configuration for more
+ * information on these defaults and the potential issues.
+ *
+ * More details can be found in the constructor methods for each driver:
+ * - \Drupal\mysql\Driver\Database\mysql\Connection::__construct()
+ * - \Drupal\pgsql\Driver\Database\pgsql\Connection::__construct()
+ * - \Drupal\sqlite\Driver\Database\sqlite\Connection::__construct()
+ *
+ * Sample Database configuration format for PostgreSQL (pgsql):
+ * @code
+ *   $databases['default']['default'] = [
+ *     'driver' => 'pgsql',
+ *     'database' => 'databasename',
+ *     'username' => 'sqlusername',
+ *     'password' => 'sqlpassword',
+ *     'host' => 'localhost',
+ *     'prefix' => '',
+ *   ];
+ * @endcode
+ *
+ * Sample Database configuration format for SQLite (sqlite):
+ * @code
+ *   $databases['default']['default'] = [
+ *     'driver' => 'sqlite',
+ *     'database' => '/path/to/databasefilename',
+ *   ];
+ * @endcode
+ *
+ * Sample Database configuration format for a driver in a contributed module:
+ * @code
+ *   $databases['default']['default'] = [
+ *     'driver' => 'my_driver',
+ *     'namespace' => 'Drupal\my_module\Driver\Database\my_driver',
+ *     'autoload' => 'modules/my_module/src/Driver/Database/my_driver/',
+ *     'database' => 'databasename',
+ *     'username' => 'sqlusername',
+ *     'password' => 'sqlpassword',
+ *     'host' => 'localhost',
+ *     'prefix' => '',
+ *   ];
+ * @endcode
+ *
+ * Sample Database configuration format for a driver that is extending another
+ * database driver.
+ * @code
+ *   $databases['default']['default'] = [
+ *     'driver' => 'my_driver',
+ *     'namespace' => 'Drupal\my_module\Driver\Database\my_driver',
+ *     'autoload' => 'modules/my_module/src/Driver/Database/my_driver/',
+ *     'database' => 'databasename',
+ *     'username' => 'sqlusername',
+ *     'password' => 'sqlpassword',
+ *     'host' => 'localhost',
+ *     'prefix' => '',
+ *     'dependencies' => [
+ *       'parent_module' => [
+ *         'namespace' => 'Drupal\parent_module',
+ *         'autoload' => 'core/modules/parent_module/src/',
+ *       ],
+ *     ],
+ *   ];
+ * @endcode
+ */
+
+/**
+ * Location of the site configuration files.
+ *
+ * The $settings['config_sync_directory'] specifies the location of file system
+ * directory used for syncing configuration data. On install, the directory is
+ * created. This is used for configuration imports.
+ *
+ * The default location for this directory is inside a randomly-named
+ * directory in the public files path. The setting below allows you to set
+ * its location.
+ */
+# $settings['config_sync_directory'] = '/directory/outside/webroot';
+
+/**
+ * Settings:
+ *
+ * $settings contains environment-specific configuration, such as the files
+ * directory and reverse proxy address, and temporary configuration, such as
+ * security overrides.
+ *
+ * @see \Drupal\Core\Site\Settings::get()
+ */
+
+/**
+ * Salt for one-time login links, cancel links, form tokens, etc.
+ *
+ * This variable will be set to a random value by the installer. All one-time
+ * login links will be invalidated if the value is changed. Note that if your
+ * site is deployed on a cluster of web servers, you must ensure that this
+ * variable has the same value on each server.
+ *
+ * For enhanced security, you may set this variable to the contents of a file
+ * outside your document root, and vary the value across environments (like
+ * production and development); you should also ensure that this file is not
+ * stored with backups of your database.
+ *
+ * Example:
+ * @code
+ *   $settings['hash_salt'] = file_get_contents('/home/example/salt.txt');
+ * @endcode
+ */
+$settings['hash_salt'] = 'tITOc_zhEkTPVYiKy8I81TTyIVNpOCAMKt6hcSskC4ziGyKxk9jHw7P_SPXv_ZyyETjrHGwBRA';
+
+/**
+ * Deployment identifier.
+ *
+ * Drupal's dependency injection container will be automatically invalidated and
+ * rebuilt when the Drupal core version changes. When updating contributed or
+ * custom code that changes the container, changing this identifier will also
+ * allow the container to be invalidated as soon as code is deployed.
+ */
+# $settings['deployment_identifier'] = \Drupal::VERSION;
+
+/**
+ * Access control for update.php script.
+ *
+ * If you are updating your Drupal installation using the update.php script but
+ * are not logged in using either an account with the "Administer software
+ * updates" permission or the site maintenance account (the account that was
+ * created during installation), you will need to modify the access check
+ * statement below. Change the FALSE to a TRUE to disable the access check.
+ * After finishing the upgrade, be sure to open this file again and change the
+ * TRUE back to a FALSE!
+ */
+$settings['update_free_access'] = FALSE;
+
+/**
+ * Fallback to HTTP for Update Manager and for fetching security advisories.
+ *
+ * If your site fails to connect to updates.drupal.org over HTTPS (either when
+ * fetching data on available updates, or when fetching the feed of critical
+ * security announcements), you may uncomment this setting and set it to TRUE to
+ * allow an insecure fallback to HTTP. Note that doing so will open your site up
+ * to a potential man-in-the-middle attack. You should instead attempt to
+ * resolve the issues before enabling this option.
+ * @see https://www.drupal.org/docs/system-requirements/php-requirements#openssl
+ * @see https://en.wikipedia.org/wiki/Man-in-the-middle_attack
+ * @see \Drupal\update\UpdateFetcher
+ * @see \Drupal\system\SecurityAdvisories\SecurityAdvisoriesFetcher
+ */
+# $settings['update_fetch_with_http_fallback'] = TRUE;
+
+/**
+ * External access proxy settings:
+ *
+ * If your site must access the Internet via a web proxy then you can enter the
+ * proxy settings here. Set the full URL of the proxy, including the port, in
+ * variables:
+ * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP
+ *   requests.
+ * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS
+ *   requests.
+ * You can pass in the user name and password for basic authentication in the
+ * URLs in these settings.
+ *
+ * You can also define an array of host names that can be accessed directly,
+ * bypassing the proxy, in $settings['http_client_config']['proxy']['no'].
+ */
+# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080';
+# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080';
+# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost'];
+
+/**
+ * Reverse Proxy Configuration:
+ *
+ * Reverse proxy servers are often used to enhance the performance
+ * of heavily visited sites and may also provide other site caching,
+ * security, or encryption benefits. In an environment where Drupal
+ * is behind a reverse proxy, the real IP address of the client should
+ * be determined such that the correct client IP address is available
+ * to Drupal's logging, statistics, and access management systems. In
+ * the most simple scenario, the proxy server will add an
+ * X-Forwarded-For header to the request that contains the client IP
+ * address. However, HTTP headers are vulnerable to spoofing, where a
+ * malicious client could bypass restrictions by setting the
+ * X-Forwarded-For header directly. Therefore, Drupal's proxy
+ * configuration requires the IP addresses of all remote proxies to be
+ * specified in $settings['reverse_proxy_addresses'] to work correctly.
+ *
+ * Enable this setting to get Drupal to determine the client IP from the
+ * X-Forwarded-For header. If you are unsure about this setting, do not have a
+ * reverse proxy, or Drupal operates in a shared hosting environment, this
+ * setting should remain commented out.
+ *
+ * In order for this setting to be used you must specify every possible
+ * reverse proxy IP address in $settings['reverse_proxy_addresses'].
+ * If a complete list of reverse proxies is not available in your
+ * environment (for example, if you use a CDN) you may set the
+ * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
+ * Be aware, however, that it is likely that this would allow IP
+ * address spoofing unless more advanced precautions are taken.
+ */
+# $settings['reverse_proxy'] = TRUE;
+
+/**
+ * Reverse proxy addresses.
+ *
+ * Specify every reverse proxy IP address in your environment, as an array of
+ * IPv4/IPv6 addresses or subnets in CIDR notation. This setting is required if
+ * $settings['reverse_proxy'] is TRUE.
+ */
+# $settings['reverse_proxy_addresses'] = ['a.b.c.d', 'e.f.g.h/24', ...];
+
+/**
+ * Reverse proxy trusted headers.
+ *
+ * Sets which headers to trust from your reverse proxy.
+ *
+ * Common values are:
+ * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR
+ * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST
+ * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT
+ * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO
+ * - \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
+ *
+ * Note the default value of
+ * @code
+ * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
+ * @endcode
+ * is not secure by default. The value should be set to only the specific
+ * headers the reverse proxy uses. For example:
+ * @code
+ * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO
+ * @endcode
+ * This would trust the following headers:
+ * - X_FORWARDED_FOR
+ * - X_FORWARDED_HOST
+ * - X_FORWARDED_PROTO
+ * - X_FORWARDED_PORT
+ *
+ * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR
+ * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST
+ * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT
+ * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO
+ * @see \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
+ * @see \Symfony\Component\HttpFoundation\Request::setTrustedProxies
+ */
+# $settings['reverse_proxy_trusted_headers'] = \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED;
+
+
+/**
+ * Page caching:
+ *
+ * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
+ * views. This tells a HTTP proxy that it may return a page from its local
+ * cache without contacting the web server, if the user sends the same Cookie
+ * header as the user who originally requested the cached page. Without "Vary:
+ * Cookie", authenticated users would also be served the anonymous page from
+ * the cache. If the site has mostly anonymous users except a few known
+ * editors/administrators, the Vary header can be omitted. This allows for
+ * better caching in HTTP proxies (including reverse proxies), i.e. even if
+ * clients send different cookies, they still get content served from the cache.
+ * However, authenticated users should access the site directly (i.e. not use an
+ * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
+ * getting cached pages from the proxy.
+ */
+# $settings['omit_vary_cookie'] = TRUE;
+
+
+/**
+ * Cache TTL for client error (4xx) responses.
+ *
+ * Items cached per-URL tend to result in a large number of cache items, and
+ * this can be problematic on 404 pages which by their nature are unbounded. A
+ * fixed TTL can be set for these items, defaulting to one hour, so that cache
+ * backends which do not support LRU can purge older entries. To disable caching
+ * of client error responses set the value to 0. Currently applies only to
+ * page_cache module.
+ */
+# $settings['cache_ttl_4xx'] = 3600;
+
+/**
+ * Expiration of cached forms.
+ *
+ * Drupal's Form API stores details of forms in a cache and these entries are
+ * kept for at least 6 hours by default. Expired entries are cleared by cron.
+ *
+ * @see \Drupal\Core\Form\FormCache::setCache()
+ */
+# $settings['form_cache_expiration'] = 21600;
+
+/**
+ * Class Loader.
+ *
+ * If the APCu extension is detected, the classloader will be optimized to use
+ * it. Set to FALSE to disable this.
+ *
+ * @see https://getcomposer.org/doc/articles/autoloader-optimization.md
+ */
+# $settings['class_loader_auto_detect'] = FALSE;
+
+/**
+ * Authorized file system operations:
+ *
+ * The Update Manager module included with Drupal provides a mechanism for
+ * site administrators to securely install missing updates for the site
+ * directly through the web user interface. On securely-configured servers,
+ * the Update manager will require the administrator to provide SSH or FTP
+ * credentials before allowing the installation to proceed; this allows the
+ * site to update the new files as the user who owns all the Drupal files,
+ * instead of as the user the webserver is running as. On servers where the
+ * webserver user is itself the owner of the Drupal files, the administrator
+ * will not be prompted for SSH or FTP credentials (note that these server
+ * setups are common on shared hosting, but are inherently insecure).
+ *
+ * Some sites might wish to disable the above functionality, and only update
+ * the code directly via SSH or FTP themselves. This setting completely
+ * disables all functionality related to these authorized file operations.
+ *
+ * @see https://www.drupal.org/node/244924
+ *
+ * Remove the leading hash signs to disable.
+ */
+# $settings['allow_authorize_operations'] = FALSE;
+
+/**
+ * Default mode for directories and files written by Drupal.
+ *
+ * Value should be in PHP Octal Notation, with leading zero.
+ */
+# $settings['file_chmod_directory'] = 0775;
+# $settings['file_chmod_file'] = 0664;
+
+/**
+ * Optimized assets path:
+ *
+ * A local file system path where optimized assets will be stored. This directory
+ * must exist and be writable by Drupal. This directory must be relative to
+ * the Drupal installation directory and be accessible over the web.
+ */
+# $settings['file_assets_path'] = 'sites/default/files';
+
+/**
+ * Public file base URL:
+ *
+ * An alternative base URL to be used for serving public files. This must
+ * include any leading directory path.
+ *
+ * A different value from the domain used by Drupal to be used for accessing
+ * public files. This can be used for a simple CDN integration, or to improve
+ * security by serving user-uploaded files from a different domain or subdomain
+ * pointing to the same server. Do not include a trailing slash.
+ */
+# $settings['file_public_base_url'] = 'http://downloads.example.com/files';
+
+/**
+ * Public file path:
+ *
+ * A local file system path where public files will be stored. This directory
+ * must exist and be writable by Drupal. This directory must be relative to
+ * the Drupal installation directory and be accessible over the web.
+ */
+# $settings['file_public_path'] = 'sites/default/files';
+
+/**
+ * Additional public file schemes:
+ *
+ * Public schemes are URI schemes that allow download access to all users for
+ * all files within that scheme.
+ *
+ * The "public" scheme is always public, and the "private" scheme is always
+ * private, but other schemes, such as "https", "s3", "example", or others,
+ * can be either public or private depending on the site. By default, they're
+ * private, and access to individual files is controlled via
+ * hook_file_download().
+ *
+ * Typically, if a scheme should be public, a module makes it public by
+ * implementing hook_file_download(), and granting access to all users for all
+ * files. This could be either the same module that provides the stream wrapper
+ * for the scheme, or a different module that decides to make the scheme
+ * public. However, in cases where a site needs to make a scheme public, but
+ * is unable to add code in a module to do so, the scheme may be added to this
+ * variable, the result of which is that system_file_download() grants public
+ * access to all files within that scheme.
+ */
+# $settings['file_additional_public_schemes'] = ['example'];
+
+/**
+ * File schemes whose paths should not be normalized:
+ *
+ * Normally, Drupal normalizes '/./' and '/../' segments in file URIs in order
+ * to prevent unintended file access. For example, 'private://css/../image.png'
+ * is normalized to 'private://image.png' before checking access to the file.
+ *
+ * On Windows, Drupal also replaces '\' with '/' in URIs for the local
+ * filesystem.
+ *
+ * If file URIs with one or more scheme should not be normalized like this, then
+ * list the schemes here. For example, if 'porcelain://china/./plate.png' should
+ * not be normalized to 'porcelain://china/plate.png', then add 'porcelain' to
+ * this array. In this case, make sure that the module providing the 'porcelain'
+ * scheme does not allow unintended file access when using '/../' to move up the
+ * directory tree.
+ */
+# $settings['file_sa_core_2023_005_schemes'] = ['porcelain'];
+
+/**
+ * Configuration for phpinfo() admin status report.
+ *
+ * Drupal's admin UI includes a report at admin/reports/status/php which shows
+ * the output of phpinfo(). The full output can contain sensitive information
+ * so by default Drupal removes some sections.
+ *
+ * This behaviour can be configured by setting this variable to a different
+ * value corresponding to the flags parameter of phpinfo().
+ *
+ * If you need to expose more information in the report - for example to debug a
+ * problem - consider doing so temporarily.
+ *
+ * @see https://www.php.net/manual/function.phpinfo.php
+ */
+# $settings['sa_core_2023_004_phpinfo_flags'] = ~ (INFO_VARIABLES | INFO_ENVIRONMENT);
+
+/**
+ * Private file path:
+ *
+ * A local file system path where private files will be stored. This directory
+ * must be absolute, outside of the Drupal installation directory and not
+ * accessible over the web.
+ *
+ * Note: Caches need to be cleared when this value is changed to make the
+ * private:// stream wrapper available to the system.
+ *
+ * See https://www.drupal.org/documentation/modules/file for more information
+ * about securing private files.
+ */
+# $settings['file_private_path'] = '';
+
+/**
+ * Temporary file path:
+ *
+ * A local file system path where temporary files will be stored. This directory
+ * must be absolute, outside of the Drupal installation directory and not
+ * accessible over the web.
+ *
+ * If this is not set, the default for the operating system will be used.
+ *
+ * @see \Drupal\Component\FileSystem\FileSystem::getOsTemporaryDirectory()
+ */
+# $settings['file_temp_path'] = '/tmp';
+
+/**
+ * Session write interval:
+ *
+ * Set the minimum interval between each session write to database.
+ * For performance reasons it defaults to 180.
+ */
+# $settings['session_write_interval'] = 180;
+
+/**
+ * String overrides:
+ *
+ * To override specific strings on your site with or without enabling the Locale
+ * module, add an entry to this list. This functionality allows you to change
+ * a small number of your site's default English language interface strings.
+ *
+ * Remove the leading hash signs to enable.
+ *
+ * The "en" part of the variable name, is dynamic and can be any langcode of
+ * any added language. (eg locale_custom_strings_de for german).
+ */
+# $settings['locale_custom_strings_en'][''] = [
+#   'Home' => 'Front page',
+#   '@count min' => '@count minutes',
+# ];
+
+/**
+ * A custom theme for the offline page:
+ *
+ * This applies when the site is explicitly set to maintenance mode through the
+ * administration page or when the database is inactive due to an error.
+ * The template file should also be copied into the theme. It is located inside
+ * 'core/modules/system/templates/maintenance-page.html.twig'.
+ *
+ * Note: This setting does not apply to installation and update pages.
+ */
+# $settings['maintenance_theme'] = 'claro';
+
+/**
+ * PHP settings:
+ *
+ * To see what PHP settings are possible, including whether they can be set at
+ * runtime (by using ini_set()), read the PHP documentation:
+ * http://php.net/manual/ini.list.php
+ * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime
+ * settings and the .htaccess file for non-runtime settings.
+ * Settings defined there should not be duplicated here so as to avoid conflict
+ * issues.
+ */
+
+/**
+ * If you encounter a situation where users post a large amount of text, and
+ * the result is stripped out upon viewing but can still be edited, Drupal's
+ * output filter may not have sufficient memory to process it.  If you
+ * experience this issue, you may wish to uncomment the following two lines
+ * and increase the limits of these variables.  For more information, see
+ * http://php.net/manual/pcre.configuration.php.
+ */
+# ini_set('pcre.backtrack_limit', 200000);
+# ini_set('pcre.recursion_limit', 200000);
+
+/**
+ * Configuration overrides.
+ *
+ * To globally override specific configuration values for this site,
+ * set them here. You usually don't need to use this feature. This is
+ * useful in a configuration file for a vhost or directory, rather than
+ * the default settings.php.
+ *
+ * Note that any values you provide in these variable overrides will not be
+ * viewable from the Drupal administration interface. The administration
+ * interface displays the values stored in configuration so that you can stage
+ * changes to other environments that don't have the overrides.
+ *
+ * There are particular configuration values that are risky to override. For
+ * example, overriding the list of installed modules in 'core.extension' is not
+ * supported as module install or uninstall has not occurred. Other examples
+ * include field storage configuration, because it has effects on database
+ * structure, and 'core.menu.static_menu_link_overrides' since this is cached in
+ * a way that is not config override aware. Also, note that changing
+ * configuration values in settings.php will not fire any of the configuration
+ * change events.
+ */
+# $config['system.site']['name'] = 'My Drupal site';
+# $config['user.settings']['anonymous'] = 'Visitor';
+
+/**
+ * Load services definition file.
+ */
+$settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml';
+
+/**
+ * Override the default service container class.
+ *
+ * This is useful for example to trace the service container for performance
+ * tracking purposes, for testing a service container with an error condition or
+ * to test a service container that throws an exception.
+ */
+# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container';
+
+/**
+ * Override the default yaml parser class.
+ *
+ * Provide a fully qualified class name here if you would like to provide an
+ * alternate implementation YAML parser. The class must implement the
+ * \Drupal\Component\Serialization\SerializationInterface interface.
+ */
+# $settings['yaml_parser_class'] = NULL;
+
+/**
+ * Trusted host configuration.
+ *
+ * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host
+ * header spoofing.
+ *
+ * To enable the trusted host mechanism, you enable your allowable hosts
+ * in $settings['trusted_host_patterns']. This should be an array of regular
+ * expression patterns, without delimiters, representing the hosts you would
+ * like to allow.
+ *
+ * For example:
+ * @code
+ * $settings['trusted_host_patterns'] = [
+ *   '^www\.example\.com$',
+ * ];
+ * @endcode
+ * will allow the site to only run from www.example.com.
+ *
+ * If you are running multisite, or if you are running your site from
+ * different domain names (eg, you don't redirect http://www.example.com to
+ * http://example.com), you should specify all of the host patterns that are
+ * allowed by your site.
+ *
+ * For example:
+ * @code
+ * $settings['trusted_host_patterns'] = [
+ *   '^example\.com$',
+ *   '^.+\.example\.com$',
+ *   '^example\.org$',
+ *   '^.+\.example\.org$',
+ * ];
+ * @endcode
+ * will allow the site to run off of all variants of example.com and
+ * example.org, with all subdomains included.
+ *
+ * @see https://www.drupal.org/docs/installing-drupal/trusted-host-settings
+ */
+# $settings['trusted_host_patterns'] = [];
+
+/**
+ * The default list of directories that will be ignored by Drupal's file API.
+ *
+ * By default ignore node_modules and bower_components folders to avoid issues
+ * with common frontend tools and recursive scanning of directories looking for
+ * extensions.
+ *
+ * @see \Drupal\Core\File\FileSystemInterface::scanDirectory()
+ * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory()
+ */
+$settings['file_scan_ignore_directories'] = [
+  'node_modules',
+  'bower_components',
+];
+
+/**
+ * The default number of entities to update in a batch process.
+ *
+ * This is used by update and post-update functions that need to go through and
+ * change all the entities on a site, so it is useful to increase this number
+ * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a
+ * larger number of entities to be processed in a single batch run.
+ */
+$settings['entity_update_batch_size'] = 50;
+
+/**
+ * Entity update backup.
+ *
+ * This is used to inform the entity storage handler that the backup tables as
+ * well as the original entity type and field storage definitions should be
+ * retained after a successful entity update process.
+ */
+$settings['entity_update_backup'] = TRUE;
+
+/**
+ * Node migration type.
+ *
+ * This is used to force the migration system to use the classic node migrations
+ * instead of the default complete node migrations. The migration system will
+ * use the classic node migration only if there are existing migrate_map tables
+ * for the classic node migrations and they contain data. These tables may not
+ * exist if you are developing custom migrations and do not want to use the
+ * complete node migrations. Set this to TRUE to force the use of the classic
+ * node migrations.
+ */
+$settings['migrate_node_migrate_type_classic'] = FALSE;
+
+/**
+ * The default settings for migration sources.
+ *
+ * These settings are used as the default settings on the Credential form at
+ * /upgrade/credentials.
+ *
+ * - migrate_source_version - The version of the source database. This can be
+ *   '6' or '7'. Defaults to '7'.
+ * - migrate_source_connection - The key in the $databases array for the source
+ *   site.
+ * - migrate_file_public_path - The location of the source Drupal 6 or Drupal 7
+ *   public files. This can be a local file directory containing the source
+ *   Drupal 6 or Drupal 7 site (e.g /var/www/docroot), or the site address
+ *   (e.g http://example.com).
+ * - migrate_file_private_path - The location of the source Drupal 7 private
+ *   files. This can be a local file directory containing the source Drupal 7
+ *   site (e.g /var/www/docroot), or empty to use the same value as Public
+ *   files directory.
+ *
+ * Sample configuration for a drupal 6 source site with the source files in a
+ * local directory.
+ *
+ * @code
+ * $settings['migrate_source_version'] = '6';
+ * $settings['migrate_source_connection'] = 'migrate';
+ * $settings['migrate_file_public_path'] = '/var/www/drupal6';
+ * @endcode
+ *
+ * Sample configuration for a drupal 7 source site with public source files on
+ * the source site and the private files in a local directory.
+ *
+ * @code
+ * $settings['migrate_source_version'] = '7';
+ * $settings['migrate_source_connection'] = 'migrate';
+ * $settings['migrate_file_public_path'] = 'https://drupal7.com';
+ * $settings['migrate_file_private_path'] = '/var/www/drupal7';
+ * @endcode
+ */
+# $settings['migrate_source_connection'] = '';
+# $settings['migrate_source_version'] = '';
+# $settings['migrate_file_public_path'] = '';
+# $settings['migrate_file_private_path'] = '';
+
+/**
+ * Load local development override configuration, if available.
+ *
+ * Create a settings.local.php file to override variables on secondary (staging,
+ * development, etc.) installations of this site.
+ *
+ * Typical uses of settings.local.php include:
+ * - Disabling caching.
+ * - Disabling JavaScript/CSS compression.
+ * - Rerouting outgoing emails.
+ *
+ * Keep this code block at the end of this file to take full effect.
+ */
+#
+# if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) {
+#   include $app_root . '/' . $site_path . '/settings.local.php';
+# }
+if (getenv('IS_DDEV_PROJECT') == 'true' && file_exists(__DIR__ . '/settings.ddev.php')) {
+  include __DIR__ . '/settings.ddev.php';
+}
+$databases['default']['default'] = array (
+  'database' => 'db',
+  'username' => 'db',
+  'password' => 'db',
+  'prefix' => '',
+  'host' => 'db',
+  'port' => 3306,
+  'isolation_level' => 'READ COMMITTED',
+  'driver' => 'mysql',
+  'namespace' => 'Drupal\\mysql\\Driver\\Database\\mysql',
+  'autoload' => 'core/modules/mysql/src/Driver/Database/mysql/',
+);