Pimatic device

[mcblacky]

Thanks for the software.
Was able to upload the sketch to my ESP8266 developer board 12E.
Had an issue regarding Time.h library but solved it by installing a new version time library
at https://github.com/PaulStoffregen/Time , I am using 1.6.5 version of Arduino IDE.
My question is how to configure on the pimatic side.
Thanks.

[Okadesde]

Hi,
I'm currently using a different home server, but you just need to add two "Variables Device"s in pimatic and name it like "-hum" and a second one like "-tem". Then it will get updated automatically if you have set the pimatic server correctly.

You can find additional info here: https://pimatic.org/api/actions/ (topic: updateVariable).

[mcblacky]

Good day, Many thanks and succesfull implemented. Is your software a rebuilt of koffie.nl software or the other way arround. Yours is more easy to understand and to adjust for other sensors and thus now operational with a BMP180 pressure sensor. Best Regards, Martien Swart Op 21-4-2017 om 19:07 schreef Okadesde:

…

Hi, I'm currently using a different home server, but you just need to add two "Variables Device"s in pimatic and name it like "-hum" and a second one like "-tem". Then it will get updated automatically if you have set the pimatic server correctly. You can find additional info here: https://pimatic.org/api/actions/ (topic: updateVariable). — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#6 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AKbuwJhvwcXp7fbLkN8Ivxj4W-zD5qJDks5ryOJAgaJpZM4NEgx6>.

--- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware. https://www.avast.com/antivirus