Makefile.in

# Makefile to install foomatic-db-engine
# $Revision$

# PREFIX defaults to /usr/local for manually installed progs, so that they
# are not messed up on a system upgrade.
#
# `architecture independent', static data files i.e. perl libs go into
#   $(PREFIX)/share/foomatic
# (user) executables into $(PREFIX)/bin/
# system binaries go into $(PREFIX)/sbin
# configuration files into /etc/foomatic/*.
#
# The PERLPREFIX allows a seperate prefix for the Perl libraries. Use this
# when Perl libraries in /usr/local are not found.

# Variables

DEBUG=

prefix=@prefix@
exec_prefix=@exec_prefix@
libdir=@libdir@
bindir=@bindir@
sbindir=@sbindir@
mandir=@mandir@
datarootdir=@datarootdir@
datadir=@datadir@
sysconfdir=@sysconfdir@

SRC=@srcdir@
INSTALL=@INSTALL@
PREFIX=$(prefix)
PERLPREFIX=@PERLPREFIX@

# Foomatic database location for a regular installation
LIBDIR=@LIBDIR@

# Foomatic database location for a "make inplace" installation
LOCAL_LIBDIR=@LOCAL_LIBDIR@

# foomatic-rip path for a regular installation
FOOMATIC_RIP=@FOOMATIC_RIP@

# foomatic-rip path for a "make inplace" installation
LOCAL_FOOMATIC_RIP=@LOCAL_FOOMATIC_RIP@

# Locations for installing the components of this package
BINDIR=$(bindir)
SBINDIR=$(sbindir)
MANDIR=$(mandir)
ETCDIR=$(sysconfdir)/foomatic

## Settings for Perl
# Where to find the perl binary
PERL=@PERL@
# How to install the perl libs, may be either "site" or "perl" 
# details in the ExtUtils::MakeMaker manpage
PERL_INSTALLDIRS=@PERL_INSTALLDIRS@

# Genereal paths for all filter scripts
EXEC_PATH=/usr/local/bin:/usr/bin:/bin
LOG_PATH=/tmp

# Paths for LPD and LPRng
LPD_SPOOL=@LPD_SPOOL@
LPD_LOG=@LPD_LOG@
LPD_BIN=@LPD_BIN@
PRINTCAP=@PRINTCAP@
LPRNG_CONF=@LPRNG_CONF@
LPD_LPR=@LPD_LPR@
LPD_LPQ=@LPD_LPQ@
LPD_LPRM=@LPD_LPRM@
LPD_LPC=@LPD_LPC@
LPRNG_CHECKPC=@LPRNG_CHECKPC@

# Paths and other settings for CUPS
CUPS_ETC=@CUPS_ETC@
CUPS_ADMIN=@CUPS_ADMIN@
CUPS_LPSTAT=@CUPS_LPSTAT@
CUPS_PPDS=@CUPS_PPDS@
CUPS_FILTERS=@CUPS_FILTERS@
CUPS_BACKENDS=@CUPS_BACKENDS@
LIB_CUPS=@LIB_CUPS@
CUPS_DRIVER=@LIB_CUPS@/driver
CUPS_PCONF=@CUPS_PCONF@
CUPS_LPR=@CUPS_LPR@
CUPS_LPQ=@CUPS_LPQ@
CUPS_LPRM=@CUPS_LPRM@
CUPS_LPC=@CUPS_LPC@
CUPS_LP=@CUPS_LP@
CUPS_CANCEL=@CUPS_CANCEL@
CUPS_ENABLE=@CUPS_ENABLE@
CUPS_DISABLE=@CUPS_DISABLE@
CUPS_ACCEPT=@CUPS_ACCEPT@
CUPS_REJECT=@CUPS_REJECT@
CUPS_LPMOVE=@CUPS_LPMOVE@
CUPS_LPOPTIONS=@CUPS_LPOPTIONS@
CUPS_LPINFO=@CUPS_LPINFO@

# Paths for PDQ
PDQ_CONF=@PDQ_CONF@
PDQ_PRINTRC=@PDQ_PRINTRC@
PDQ_FOOMATIC=$(PDQ_CONF)/drivers/foomatic
PDQ_PRINT=@PDQ_PRINT@
PDQ_JOBDIR=~/.printjobs

# Paths for PPR
PPR_PPRD=@PPR_PPRD@
PPR_INTERFACES=@PPR_INTERFACES@
PPR_PPDFILES=@PPR_PPDFILES@
PPR_ETC=@PPR_ETC@
PPR_PPR=@PPR_PPR@
PPR_PPAD=@PPR_PPAD@
PPR_PPOP=@PPR_PPOP@

# Paths for direct, spoolerless printing
DIRECT_ETC=$(ETCDIR)/direct
DIRECT_CONFIG=$(DIRECT_ETC)/.config

# Other paths
NC=@NC@
RLPR=@RLPR@
SMBCLIENT=@SMBCLIENT@
NPRINT=@NPRINT@
PTAL_CONNECT=@PTAL_CONNECT@
PTAL_PIPES=@PTAL_PIPES@
MTINK_PIPES=@MTINK_PIPES@
CAT=@CAT@
GZIP=@GZIP@
WGET=@WGET@
CURL=@CURL@

# This is mainly useful for building a binary foomatic package
DESTDIR=/

### Probably nothing to fiddle past here

# Files generated by the AC_OUTPUT call of "./configure"
AC_OUTPUT_FILES:=Makefile makeDefaults makeMan \
	foomatic-configure foomatic-printjob \
	foomatic-kitload foomatic-ppdfile foomatic-preferred-driver \
	foomatic-cleanupdrivers foomatic-getpjloptions \
	foomatic-addpjloptions foomatic-compiledb \
	foomatic-nonumericalids foomatic-replaceoldprinterids \
	foomatic-ppd-options foomatic-printermap-to-gutenprint-xml \
	foomatic-extract-text foomatic-searchprinter foomatic-ppd-to-xml \
	foomatic-verify-xml foomatic-xml-to-sqlite foomatic-test-build

# User programs and helper programs
BINFILES:=foomatic-printjob foomatic-configure \
	foomatic-ppdfile \
	foomatic-ppd-options foomatic-searchprinter foomatic-ppd-to-xml 

# Administrative commands, only useful for admins
SBINFILES:=foomatic-kitload \
	foomatic-getpjloptions foomatic-addpjloptions \
	foomatic-preferred-driver \
	foomatic-nonumericalids foomatic-replaceoldprinterids \
	foomatic-printermap-to-gutenprint-xml \
	foomatic-cleanupdrivers foomatic-extract-text \
	foomatic-verify-xml foomatic-xml-to-sqlite \
	foomatic-test-build foomatic-compiledb

# Foomatic XML templates
TEMPLATES:=pjl_enum_choice.xml pjl_enum_option.xml pjl_num_option.xml

# Masks for trash files which have to be removed before packaging Foomatic
TRASHFILES:="*~" "*\#*" ".??*" "*.rej"

all: build

# The install rule should check for kitloads and avoid stomping.  It doesn't
install: install-bin install-man

check-config:
	@if [ -f .testing-stamp ] ; then \
	   echo 'Cowardly refusing to install testing Defaults.pm.' ;\
	   echo 'Use "make testing-clean; make defaults" to get a proper one.' ;\
	   exit 1 ;\
	fi

install-bin: check-config lib/Makefile
#	This is the only way to get the Perl-generated Makefile using
#	$(DESTDIR) properly
	( cd lib && \
	  $(MAKE) PREFIX=$(PERLPREFIX) && \
	  $(MAKE) PREFIX=$(PERLPREFIX) DESTDIR=$(DESTDIR) pure_install \
	)
	${SRC}/mkinstalldirs $(DESTDIR)$(BINDIR)
	${SRC}/mkinstalldirs $(DESTDIR)$(SBINDIR)
	${SRC}/mkinstalldirs $(DESTDIR)$(ETCDIR)
	${SRC}/mkinstalldirs $(DESTDIR)$(LIBDIR)/templates
	${INSTALL} -m 755 $(BINFILES) $(DESTDIR)$(BINDIR)
	${INSTALL} -m 755 $(SBINFILES) $(DESTDIR)$(SBINDIR)
	( cd foomatic-templates && \
	  ${INSTALL} -m 644 $(TEMPLATES) $(DESTDIR)$(LIBDIR)/templates \
	)
	$(PERL) -p -i -e "s:foomatic-templates:$(LIBDIR)/templates:g" $(DESTDIR)$(SBINDIR)/foomatic-addpjloptions
#	Link to allow foomatic-ppdfile be called under the old name
#	foomatic-datafile
	ln -sf foomatic-ppdfile $(DESTDIR)$(BINDIR)/foomatic-datafile
#	Link foomatic-ppdfile to the CUPS 1.2 PPD generator directory,
#	so that the cups-driverd automatically generates Foomatic PPDs
#	on demand (/usr/lib/cups/driver).
	if [ -d $(LIB_CUPS) ]; then \
	  ${SRC}/mkinstalldirs $(DESTDIR)$(CUPS_DRIVER); \
	  ln -sf $(BINDIR)/foomatic-ppdfile $(DESTDIR)$(CUPS_DRIVER)/foomatic; \
	fi

install-man: check-config
	${SRC}/mkinstalldirs $(DESTDIR)$(MANDIR)
	${SRC}/mkinstalldirs $(DESTDIR)$(MANDIR)/man1
	${SRC}/mkinstalldirs $(DESTDIR)$(MANDIR)/man8
	${INSTALL} -m 644 *.1 $(DESTDIR)$(MANDIR)/man1
	${INSTALL} -m 644 *.8 $(DESTDIR)$(MANDIR)/man8

# If the Perl scripts have "use lib 'lib/';" lines from a former
# "make testing", we remove them.
build: defaults lib/Makefile man
	for m in $(BINFILES) $(SBINFILES); do \
	  $(PERL) -p -i -e "s=use lib '.*lib/';\n==s" $$m; \
	done
	chmod a+rx $(AC_OUTPUT_FILES) mkinstalldirs

lib/Makefile: lib/Makefile.PL
	( cd lib && $(PERL) Makefile.PL verbose INSTALLDIRS=$(PERL_INSTALLDIRS) )

man: lib/Foomatic/Defaults.pm
	chmod a+rx ./makeMan
	./makeMan

clean: lib/Makefile remove-trash
	$(MAKE) -C lib clean
	rm -f lib/Makefile.old
	rm -f lib/Foomatic/Defaults.pm
	rm -f *~ .testing-stamp
	rm -f gs_out
	rm -f Foomatic
	rm -rf foomatic-db
	rm -f $(BINFILES:=.1) $(SBINFILES:=.8)
#	Remove links from inplace installation
	rm -f foomatic-rip foomatic-datafile man
#       Remove foomatic-ppds-<version>.tar.gz package
	rm -rf foomatic-ppds foomatic-ppds-[0-9]*
	rm -rf foomatic-ppds*.tar.gz

distclean: clean
	rm -f $(AC_OUTPUT_FILES) config.log config.status config.cache
	rm -rf autom*.cache confdefs.h ppd foomatic-db db

maintainer-clean: distclean
	rm -f configure aclocal.m4

# Uninstall an installed Foomatic
uninstall: uninstall-bin uninstall-man

uninstall-bin: check-config lib/Makefile
#	This is the only way to get the Perl-generated Makefile using
#	$(DESTDIR) properly
	( cd lib && \
	  $(MAKE) PREFIX=$(DESTDIR)$(PERLPREFIX) uninstall \
	)
	( cd $(DESTDIR)$(BINDIR) && \
	  rm -f $(BINFILES) \
	)
	rm -f $(DESTDIR)$(BINDIR)/foomatic-datafile
	( cd $(DESTDIR)$(SBINDIR) && \
	  rm -f $(SBINFILES) \
	)
	( cd $(DESTDIR)$(LIBDIR)/templates && \
	  rm -f $(TEMPLATES) \
	)
	rmdir $(DESTDIR)$(LIBDIR)/templates || :
	rmdir $(DESTDIR)$(ETCDIR) || :

uninstall-man: check-config
	for m in $(BINFILES); do \
	  rm -f $(DESTDIR)$(MANDIR)/man1/$$m.*; \
	done
	for m in $(SBINFILES); do \
	  rm -f $(DESTDIR)$(MANDIR)/man8/$$m.*; \
	done

# Various testing/debugging/etc targets
# We insert a "use lib 'lib/';" line into the perl scripts, so that
# they use the local database and libraries, so they also work correctly on
# systems with installed Foomatic.
inplace: testing
testing: INPLACE = --inplace
testing: defaults man
	ln -sf lib/Foomatic .; \
	for m in $(BINFILES) $(SBINFILES); do \
	  $(PERL) -p -i -e "s=^\#\x21$(PERL)(.*)\n=\#\x21$(PERL)\$$1\nuse lib '`pwd`/lib/';\n=s" $$m; \
	done
	chmod a+rx $(AC_OUTPUT_FILES)
#	Links for more convenient usage of the "inplace" installation
	ln -sf $(LOCAL_FOOMATIC_RIP) foomatic-rip
	ln -sf `pwd`/foomatic-ppdfile foomatic-datafile
#	Script for the man pages
	echo -en '#!/bin/sh\nman ./\044\061.[1-9n] 2>/dev/null || man \044\061\n' > man || :
	chmod a+rx man || :

inplace-clean: testing-clean
testing-clean: clean

# Remove editor backup and temporary files
remove-trash:
	for m in $(TRASHFILES); do \
	  find . -name "$$m" -exec rm "{}" \; ; \
	done

# We need to export all Variables for makeDefaults and the target to
# work.
.EXPORT_ALL_VARIABLES:

# Use INPLACE=--inplace to get the special run-in-place Defaults.
defaults: lib/Foomatic/Defaults.pm

lib/Foomatic/Defaults.pm: Makefile makeDefaults
	chmod a+rx ./makeDefaults
	./makeDefaults $(INPLACE)
	if [ x$(INPLACE) = x--inplace ] ; then touch .testing-stamp ; fi

.PHONY: all defaults check-config build install install-bin \
	man inplace testing clean inplace-clean testing-clean distclean \
	maintainer-clean