Skip to content

Latest commit

 

History

History
376 lines (278 loc) · 15.8 KB

CHANGES.md

File metadata and controls

376 lines (278 loc) · 15.8 KB
Raw

CHANGES - libppd v2.1b1 - 2024-08-14

CHANGES IN V2.1b1 (14th August 2024)

  • Added support for libcups3 (libcups of CUPS 3.x) With these changes libcupsfilters can be built either with libcups2 (libcups of CUPS 2.x) or libcups3 (libcups of CUPS 3.x). Pull request #27.

  • Prefer PDF again in PPDs for driverless printers PDF works better with finishing, especially combinations of multiple copies, collation, and stapling/binding (Issue #42, Pull request #44).

  • Use 0.5mm as tolerance when comparing page sizes For the PWG two page sizes are considered the same when the dimensions differ no more than 0.5 mm, libppd used too tight tolerances (Issue #29, Pull request #46).

  • PPD generator: Check for required attributes when choosing input format Check for PCLm and PWG the minimum of attributes which we require during PPD generation. (Pull request #39, #40, Fedora issue).

  • ppdLoadAttributes(): Improve check whether parameters are integer (Pull request #38)

  • ppdLoadAttributes(): Fix crash when page size could not get determined (Issue #31, Pull request #37)

  • Fix crash if there is no page size for "Custom" (Pull request #35, CUPS issue #849)

  • Fix crash when incoming *ptr is NULL (Pull request #28, same as OpenPrinting/cups#831)

  • libcups2 compatibility: Use proper CUPS array callback function types Fixed CUPS array function call in libcups2 compatibility layer (Pull request #33)

  • Build system: Fix failure to correctly link to zlib Look up zlib properly with pkg-config (Pull request #32)

  • Convert INSTALL to INSTALL.md (Pull request #34)

CHANGES IN V2.0.0 (22th September 2023)

  • ppd_scan_ps(): Fix CVE-2023-4504 Added check for end of buffer/string when reading escaped character after backslash, return NULL (invalid string) if no character follows.

  • Promoted the static function "ppd_decode()" of ppd/ppd.c into the API function "ppdDecode()".

  • ppdEmitJCLPDF(): Decode "JCLToPDFInterpreter" value in ppdEmitJCLPDF() Fixes "classic" (non-driverless) PDF printing (Issue #24).

  • ppdLoadAttributes(): Apply cfIEEE1284NormalizeMakeModel() to NickName Make and model for the printer IPP attributes are extracted from the PPD's NickName, which sometimes misses the manufacturer's name. Extract it from the PPD's Manufacturer field or derive it from the model name if possible. Enhanced alternative for pull request #21.

  • Makefile.am: Fix disabling testppdfile Missing conditionals made the binary built when disabled (Pull request #18).

CHANGES IN V2.0rc2 (20th June 2023)

  • ppdFilterPSToPS(): Fixed reverse output order. When converting the former pstops CUPS filter into the filter function, some function calls got wrongly replaced by new ones, resulting in no output at all when the input should be re-arranged into reverse order. This broke printing with all PostScript printers (and proprietary CUPS drivers needing PostScript as input) which do reverse-order by default (Issue #20, Ubuntu bug #2022943).

  • Fixed resolution handling when converting PPDs to printer IPP attributes For PWG/Apple Raster or PCLm output resolutions in job options or pseudo-PostScript code in the PPD get ignored and instead, the lowest resolution of the description of the Raster format used in the PPD file gets always used, which reduced output quality (Ubuntu bug #2022929).

  • All PPD files with "MirrorPrint" option cuased mirrored printout If a PPD contains an option "MirrorPrint", the ppdFilterLoadPPD() sent the option mirror=true to the filter functions, regardless of the actual setting of "MirrorPrint" (which is usually "False" by default), making all jobs coming out with mirrored pages (Ubuntu bug #2018538).

  • PPD file generator: Put *cupsSingleFile: True into generated PPD as some driverless IPP printers do not support multi-file jobs (CUPS issue #643).

  • Add CUPS PPD attributes *cupsLanguages: ... and *cupsStringsURI ... to generated PPDs so that CUPS loads printer-specific option names and translations from the printer and uses them without need of static translations in the PPD file.

  • CUPS renames the PPD option choice name "Custom" to "_Custom" when a fixed choice is named as such, to distinguish from CUPS' facility for custom option values. We do now the same when loading PPD files.

  • Prevent duplicate PPD->IPP media-type name mappings, now we do not have dropping of some media types in the Printer Applications any more.

  • When not specifying a media source and the page size is small (5x7" or smaller) do not request the photo tray but auto instead.

  • Do not override color settings from print dialog ("ColorModel") with print-color-mode setting.

  • Make ppdFilterPSToPS() recognize %%PageRequirements: DSC comment.

  • Correctly display "Xprinter" instead of Xerox for Xprinter devices

  • Fix the job-pages-per-set value (used to apply finishings correctly) for duplex and N-up printing.

  • ppdFilterLoadPPD(): Actually create sample Raster header also for Apple/PWG Raster

  • Make the testppd build test program also work if it is started from an environment with non-English locale.

  • Minor bug fixes, silencing warnings (especially of clang), fixing typos in comments, coding style, ..., and also some fixes for memory leaks.

CHANGES IN V2.0rc1 (11th April 2023)

  • PPD file generator: Set default color mode when printer attrs say "auto" Actual printer default color mode did not get set and the often "Gray" gots set for color printers. Now we always choose the "best" mode.

    https://bugs.launchpad.net/bugs/2014976

  • ppdLoadAttributes(): Find default page size also by dimensions Some PPDs can contain the same page size twice with different names, whereas the PWG cache created from the PPD contains each size only once. This could make the default size not being found when the PPD is converted to IPP attributes. Now we search also by size and not only by name.

    https://bugs.launchpad.net/bugs/2013131

  • PPD generator for driverless printers: Add "*LandscapeOrientation:" according to the landscape-orientation-requested-preferred printer IPP attribute.

  • ppdFilterLoadPPD(): Corrected PPD attribute name so that for printers which receive PWG Raster a sample Raster header gets created.

  • Make the testppdfile utility getting built and installed by default

  • Improved formatting of reports generated by ppdTest()

CHANGES IN V2.0b4 (22nd February 2023)

  • Transfer CUPS' cupstestppd utility to ppdTest() library function The valuable tool got forgotten in the first place, now it is available as ppdTest() library function and testppdfile command line utility. The command line utility only gets installed with ./configure called with --enable-testppdfile argument.

  • In auto-generated PPDs do not set RGB default on mono printers When a PPD for a driverless printer is generated by the ppdCreatePPDFromIPP() function and the get-printer-attributes IPP response gives "print-color-mode-default=auto" the PPD's default setting for "ColorModel" is always "RGB", even on monochrome printers, which makes printing fail on most devices. Now we ignore the "print-color-mode-default" if set to "auto".

    See OpenPrinting/cups#614

  • ppdLoadAttributes(): Added NULL check for missing PPD PageSize default Some PPDs, even "everywhere" PPDs generated by CUPS for a driverless IPP printer do not have a valid default value for the default page size, like "Unknown". Added a NULL check to avoid a crash by such PPD files.

  • Coverity check done by Zdenek Dohnal for the inclusion of libppd in Fedora and Red Hat. Zdenek has fixed all the issues: Missing free(), potential string overflows, ... Thanks a lot!

  • testppd: String got freed too early In this test program run by make check a string was used after already gotten freed. Discovered via a compiler warning, but program could have actually crashed.

  • configure.ac: Change deprecated AC_PROG_LIBTOOL for LT_INIT (#8)

CHANGES IN V2.0b3 (31st January 2023)

  • COPYING, NOTICE: Simplification for autotools-generated files autotools-generated files can be included under the license of the upstream code, and FSF copyright added to upstream copyright list. Simplified COPYING appropriately.

  • Makefile.am: Include LICENSE in distribution tarball

CHANGES IN V2.0b2 (8th January 2023)

  • PPD file generator for driverless printing with CUPS: Support more than 2 resolutions in Apple Raster/AirPrint. The urf-supported IPP attribute was only parsed correctly when its RS part had only 1 or 2 and not more resolutions specified. This commit corrects now for an arbitrary amount of resolutions, taking the lowest for "draft", the highest for "high" and one in the middle for "normal" print quality (PR #3).

  • Update cfCatalogLoad() calls for API change in libcupsfilters. In libcupsfilters we have added language/translation support to the cfCatalog...() API functions via OpenPrinting/libcupsfilters#2. This changes the cfCatalogLoad() calls in libppd (both in the PPD generator for driverless printing). This commit updates them. For a quick solution we supply NULL as language for now, resembling the old behavior. We look into language support in the PPD generator later.

  • ppdFilterEmitJCL(): Added NULL check for PPD not being supplied. Classic CUPS filters created based on filter functions using ppdFilterCUPSWrapper() and also filter functions of libppd (ppdFilter...()) should also work without PPD file and not crash if no PPD file is supplied.

  • Make build of "genstrings" optional "genstrings" is only a development tool for the PPD compiler, not a user tool, therefore we make its build optional. It can be built via "make genstrings" or the "./configure" option "--enable-genstrings".

  • Makefile.am: Include NOTICE in distribution tarball

  • configure.ac: Added "foreign" to to AM_INIT_AUTOMAKE() call. Makes automake not require a file named README.

  • Cleaned up .gitignore

  • Tons of fixes in the source code documentation: README.md, INSTALL, DEVELOPING.md, CONTRIBUTING.md, COPYING, NOTICE, ... Adapted to the libppd component, added links.

CHANGES IN V2.0b1 (17th November 2022)

  • Introduced the new libppd library overtaking all the PPD handling functions from libcups, CUPS' ppdc utility (PPD compiler using *.drv files), and the PPD file collection handling functionality from cups-driverd, as they are deprecated there and will get removed in CUPS 3.x. This form of conservation is mainly intended for converting classic printer drivers which use PPDs into Printer Applications without completely rewriting them.

  • Added functions ppdLoadAttributes(), ppdFilterLoadPPD(), ppdFilterLoadPPDFile(), ppdFilterFreePPD(), and ppdFilterFreePPDFile() to convert all PPD file options and settings relevant for the filter functions in libcupsfilters into printer IPP attributes and options. Also create a named ("libppd") extension in the filter data structure, for filter functions explicitly supporting PPD files.

  • Added ppdFilterCUPSWrapper() convenience function to easily create a classic CUPS filter from a filter function.

  • Converted the ...tops CUPS filters into the filter functions ppdFilterPDFToPS(), and ppdFilterRasterToPS(). As PostScript as print output format is as deprecated as PPD files and all PostScript printers use PPD files, we move PostScript output generation to libppd, too.

  • Converted CUPS' pstops filter into the ppdFilterPSToPS() filter function.

  • Introduced ppdFilterImageToPS() filter function for Printer Applications to print on PostScript printers. It is used to print images (IPP standard requires at least JPEG to be accepted) without need of a PDF renderer (cfFilterImageToPDF() -> cfFilterPDFToPS()) and without need to convert to Raster (cfFilterImageToRaster() -> cfFilterRasterToPS()).

  • Created wrappers to add PPD-defined JCL code to jobs for native PDF printers, ppdFilterImageToPDF() and ppdFilterPDFToPDF() filter functions with the underlying ppdFilterEmitJCL() function.

  • Created ppdFilterUniversal() wrapper function for cfFilterUniversal() to add PPD file support, especially for PPD files which define driver filters.

  • ppdFilterExternalCUPS() wrapper function for cfFilterExternal() to add PPD file support.

  • Auto-pre-fill the presets with most suitable options from the PPD files with new ppdCacheAssignPresets() function (Only if not filled via "APPrinterPreset" in the PPD). This way we can use the IPP options print-color-mode, print-quality, and print-content-optimize in a PPD/CUPS-driver-retro-fitting Printer Application with most PPDs.

  • In ppdCacheCreateWithPPD() also support presets for print-content-optimize, not only for print-color-mode and print-quality.

  • In the ppdCacheGetPageSize() function do not only check the fit of the margins with the page size matching the job's page size (like "A4") but also the margins of the variants (like "A4.Borderless"), even if the variant's size dimensions differ from the base size (and the physical paper size), for example for overspray in borderless printing mode (HPLIP does this). Also select a borderless variant only if the job requests borderless (all margins zero).

  • Move the functions ppdPwgUnppdizeName(), ppdPwgPpdizeName(), and ppdPwgPpdizeResolution() into the public API.

  • In the ppdPwgUnppdizeName() allow to supply NULL as the list of characters to replace by dashes. Then all non-alpha-numeric characters get replaced, to result in IPP-conforming keyword strings.

  • In the ppdPwgUnppdizeName() function support negative numbers

  • ppdFilterPSToPS(): Introduced new input-page-ranges attribute (Issue #365, Pull request #444, #445).

  • Changed ColorModel option in the PPDs from the PPD generator to mirror the print-color-mode IPP attribute instead of providing all color space/depth combos for manual selection. Color space and depth are now auto-selected by the urf-supported and pwg-raster-document-type-supported printer IPP attributes and the settings of print-color-mode and print-quality. This is now implemented in the cfFilterGhostscript() filter function both for use of the auto-generated PPD file for driverless iPP printers and use without PPD, based on IPP attributes. For this the new library functions cupsRasterPrepareHeader() to create a header for Raster output and cupsRasterSetColorSpace() to auto-select color space and depth were created.

  • Clean-up of human-readable string handling in the PPD generator.

  • Removed support for asymmetric image resolutions ("ppi=XXXxYYY") in cfFilterImageToPS() as CUPS does not support this (Issue #347, Pull request #361, OpenPrinting CUPS issue #115).

  • Removed versioning.h and the macros defined in this file (Issue #334).

  • Removed ppdCreateFromIPPCUPS(), we have a better one in libppd. Also removed corresponding test in testppd.

  • Build system, README: Require CUPS 2.2.2+.

  • Build system: Remove '-D_PPD_DEPRECATED=""' from the compiling command lines of the source files which use libcups. The flag is not supported any more for longer times already and all the PPD-related functions deprecated by CUPS have moved into libppd now.

  • Added support for Sharp-proprietary ARDuplex PPD option name for double-sided printing.

  • Build system: Add files in .gitignore that are generated by autogen.sh, configure, and make (Pull request #336).

  • Fixed PPD memory leak caused by "emulators" field not freed (OpenPrinting CUPS issue #124).

  • Make "True" in boolean options case-insensitive (OpenPrinting CUPS pull request #106).