Shelly mini to new "homekit"

[jknutz]

HI, i've syccesfully flashed and used my shelly mini 1pm in homekit, i want to move to a new "home" but can't move since it is registered to the old home even though i have deleted it in the homekit app. What to do? cant connect it to any home now.
hope to find some help

[RavenSystem]

You must enable setup mode, and check "Reset HomeKit ID" and "Remove Wifi settings".

[jknutz]

That’s what I thought. I just can’t connect to the web interface.

[jknutz]

It is connected to my wifi, 192.168.4.36 is the ip it is getting.

[RavenSystem]

Next step:
Has device any physical switch or button connected?

[jknutz]

Yes it is connected to a physical switch and a light bulb

[RavenSystem]

Ok. Turn it on and off quickly 8 times to put device in setup mode. Then, access web using http://192.168.4.36:4567

[jknutz]

THX!!

[RavenSystem]

Now, move Shelly to the new location. Connect to WiFi AP HAA-??????, open http://192.168.4.1:4567 and configure your new WiFi settings. Then, add it to Apple Home App.

[jknutz]

It all works now thanks a millionMvh Jens-Henrik KuntzDen 19. jul. 2024 kl. 14.17 skrev José Antonio Jiménez Campos ***@***.***>: Now, move Shelly to the new location. Connect to WiFi AP HAA-??????, open http://192.168.4.1:4567 and configure your new WiFi settings. Then, add it to Apple Home App. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[RavenSystem]

FYI: There are several ways to put device in setup mode: https://github.com/RavenSystem/esp-homekit-devices/wiki/setup-mode#entering-setup-mode