diff --git a/onert-micro/eval-driver/ApiDriver.cpp b/onert-micro/eval-driver/ApiDriver.cpp
new file mode 100644
index 00000000000..8075dad215c
--- /dev/null
+++ b/onert-micro/eval-driver/ApiDriver.cpp
@@ -0,0 +1,329 @@
+/*
+ * Copyright (c) 2024 Samsung Electronics Co., Ltd. All Rights Reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdexcept>
+#include <cstdlib>
+#include <fstream>
+#include <vector>
+#include <string>
+#include <iostream>
+#include <numeric>
+
+#include "onert-micro.h"
+
+#define MODEL_TYPE float
+
+namespace
+{
+
+using DataBuffer = std::vector<char>;
+
+void readDataFromFile(const std::string &filename, char *data, size_t data_size,
+                      size_t start_position = 0)
+{
+  std::streampos start = start_position;
+
+  std::ifstream fs(filename, std::ifstream::binary);
+  if (fs.fail())
+    throw std::runtime_error("Cannot open file \"" + filename + "\".\n");
+
+  fs.seekg(start);
+
+  if (fs.read(data, data_size).fail())
+    throw std::runtime_error("Failed to read data from file \"" + filename + "\".\n");
+  fs.close();
+}
+
+void readDataFromFile(std::ifstream &fs, const std::string &filename, char *data, size_t data_size,
+                      size_t start_position = 0)
+{
+  std::streampos start = start_position;
+
+  fs.seekg(start);
+
+  if (fs.read(data, data_size).fail())
+    throw std::runtime_error("Failed to read data from file \"" + filename + "\".\n");
+}
+
+void writeDataToFile(const std::string &filename, const char *data, size_t data_size)
+{
+  std::ofstream fs(filename, std::ofstream::binary);
+  if (fs.fail())
+    throw std::runtime_error("Cannot open file \"" + filename + "\".\n");
+  if (fs.write(data, data_size).fail())
+  {
+    throw std::runtime_error("Failed to write data to file \"" + filename + "\".\n");
+  }
+}
+
+DataBuffer readFile(const char *path)
+{
+  std::ifstream file(path, std::ios::binary | std::ios::in);
+  if (!file.good())
+  {
+    std::string errmsg = "Failed to open file";
+    throw std::runtime_error(errmsg.c_str());
+  }
+
+  file.seekg(0, std::ios::end);
+  auto fileSize = file.tellg();
+  file.seekg(0, std::ios::beg);
+
+  // reserve capacity
+  DataBuffer model_data(fileSize);
+
+  // read the data
+  file.read(model_data.data(), fileSize);
+  if (file.fail())
+  {
+    std::string errmsg = "Failed to read file";
+    throw std::runtime_error(errmsg.c_str());
+  }
+
+  return model_data;
+}
+
+} // namespace
+
+bool is_correct(const uint32_t flat_size, float *calculated_data, float *target_data)
+{
+  // Find target class
+  float target_class = 0.f;
+  float target_max_val = target_data[0];
+  for (uint32_t i = 0; i < flat_size; ++i)
+  {
+    if (target_max_val < target_data[i])
+    {
+      target_max_val = target_data[i];
+      target_class = static_cast<float>(i);
+    }
+  }
+  // Find predicted class
+  float pred_class = 0.f;
+  float pred_max_val = calculated_data[0];
+  for (uint32_t i = 0; i < flat_size; ++i)
+  {
+    if (pred_max_val < calculated_data[i])
+    {
+      pred_max_val = calculated_data[i];
+      pred_class = static_cast<float>(i);
+    }
+  }
+
+  return pred_class == target_class ? true : false;
+}
+
+/*
+ * @brief EvalDriver main
+ *
+ *  Driver for testing training onert micro
+ *  Current example for testing classification task
+ *
+ */
+int entry(int argc, char **argv)
+{
+  if (argc != 11 and argc != 10)
+  {
+    std::cerr << "Two variant of usage with and without wof file: " << argv[0]
+              << " <path/to/circle/model> "
+                 " optional(<path/to/wof/file>) <path/to/save/trained/model> "
+                 "<path/to/save/checkpoint> <path/to/input/train_data> "
+                 "<path/to/input/target_train_data> "
+                 "<path/to/input/test_data> <path/to/input/target_test_data> num_of_train_smpl "
+                 "num_of_test_smpl\n";
+    return EXIT_FAILURE;
+  }
+
+  const char *circle_model_path = nullptr;
+  const char *wof_file_path = nullptr;
+  const char *output_trained_file_path = nullptr;
+  const char *input_input_train_data_path = nullptr;
+  const char *input_target_train_data_path = nullptr;
+  const char *input_input_test_data_path = nullptr;
+  const char *input_target_test_data_path = nullptr;
+  const char *checkpoints_path = nullptr;
+  int32_t num_train_data_samples = 0;
+  int32_t num_test_data_samples = 0;
+
+  if (argc == 11)
+  {
+    circle_model_path = argv[1];
+    wof_file_path = argv[2];
+    output_trained_file_path = argv[3];
+    checkpoints_path = argv[4];
+    input_input_train_data_path = argv[5];
+    input_target_train_data_path = argv[6];
+    input_input_test_data_path = argv[7];
+    input_target_test_data_path = argv[8];
+    num_train_data_samples = atoi(argv[9]);
+    num_test_data_samples = atoi(argv[10]);
+  }
+  else if (argc == 10)
+  {
+    circle_model_path = argv[1];
+    output_trained_file_path = argv[2];
+    checkpoints_path = argv[3];
+    input_input_train_data_path = argv[4];
+    input_target_train_data_path = argv[5];
+    input_input_test_data_path = argv[6];
+    input_target_test_data_path = argv[7];
+    num_train_data_samples = atoi(argv[8]);
+    num_test_data_samples = atoi(argv[9]);
+  }
+  else
+  {
+    throw std::runtime_error("Unknown commands number\n");
+  }
+
+  // Set user defined training settings
+  const uint32_t training_epochs = 20;
+  const float learning_rate = 0.001f;
+  const uint32_t BATCH_SIZE = 32;
+  const uint32_t INPUT_SIZE = 180;
+  const uint32_t OUTPUT_SIZE = 4;
+  const uint32_t num_train_layers = 10;
+  const float beta = 0.9;
+  const float beta_squares = 0.999;
+  const float epsilon = 1e-07;
+
+  nnfw_session *session;
+  nnfw_create_session(&session);
+  nnfw_load_model_from_file(session, circle_model_path);
+  nnfw_train_prepare(session);
+
+  // Temporary buffer to read input data from file using BATCH_SIZE
+  float training_input[BATCH_SIZE * INPUT_SIZE];
+  float training_target[BATCH_SIZE * OUTPUT_SIZE];
+  // Note: here test size used with BATCH_SIZE = 1
+  float test_input[INPUT_SIZE];
+  float test_target[OUTPUT_SIZE];
+  std::vector<float> cross_entropy_v2;
+
+  float max_accuracy = 0;
+
+  for (uint32_t e = 0; e < training_epochs; ++e)
+  {
+    // Run train for current epoch
+    std::cout << "Run training for epoch: " << e + 1 << "/" << training_epochs << "\n";
+
+    uint32_t num_steps = num_train_data_samples / BATCH_SIZE;
+    for (int i = 0; i < num_steps; ++i)
+    {
+      uint32_t cur_batch_size = std::min(BATCH_SIZE, num_train_data_samples - BATCH_SIZE * i);
+      cur_batch_size = std::max(1u, cur_batch_size);
+
+      // Read current input and target data
+      readDataFromFile(input_input_train_data_path, reinterpret_cast<char *>(training_input),
+                       sizeof(float) * INPUT_SIZE * cur_batch_size,
+                       i * sizeof(MODEL_TYPE) * INPUT_SIZE * BATCH_SIZE);
+
+      readDataFromFile(input_target_train_data_path, reinterpret_cast<char *>(training_target),
+                       sizeof(float) * OUTPUT_SIZE * cur_batch_size,
+                       i * sizeof(MODEL_TYPE) * OUTPUT_SIZE * BATCH_SIZE);
+
+      // Set input and target
+      nnfw_tensorinfo ti = {.dtype = NNFW_TYPE_TENSOR_FLOAT32, .rank = 2, .dims = {1, 180}};
+      nnfw_train_set_input(session, 0, training_input, &ti);
+      nnfw_train_set_expected(session, 0, training_target, nullptr);
+
+      // Train with current batch size
+      nnfw_train(session, true);
+
+      float cross_entropy_metric = 0.f;
+
+      std::cout << "step " << i << "\n";
+      // Evaluate cross_entropy and accuracy metrics
+      nnfw_train_get_loss(session, 0, &cross_entropy_metric);
+      std::cout << "Train CROSS ENTROPY = " << cross_entropy_metric << "\n";
+      cross_entropy_v2.push_back(cross_entropy_metric);
+    }
+    // Calculate and print average values
+    float sum_ent = std::accumulate(cross_entropy_v2.begin(), cross_entropy_v2.end(), 0.f);
+    std::cout << "Train Average CROSS ENTROPY for 2 = " << sum_ent / cross_entropy_v2.size()
+              << "\n";
+    cross_entropy_v2.clear();
+
+    // Run test for current epoch
+    std::cout << "Run test for epoch: " << e + 1 << "/" << training_epochs << "\n";
+    num_steps = num_train_data_samples;
+    int correct_predictions = 0;
+    for (int i = 0; i < num_steps; ++i)
+    {
+      uint32_t cur_batch_size = 1;
+      readDataFromFile(input_input_train_data_path, reinterpret_cast<char *>(test_input),
+                       sizeof(float) * INPUT_SIZE * cur_batch_size,
+                       i * sizeof(MODEL_TYPE) * INPUT_SIZE);
+
+      readDataFromFile(input_target_train_data_path, reinterpret_cast<char *>(test_target),
+                       sizeof(float) * OUTPUT_SIZE * cur_batch_size,
+                       i * sizeof(MODEL_TYPE) * OUTPUT_SIZE);
+
+      nnfw_tensorinfo ti = {.dtype = NNFW_TYPE_TENSOR_FLOAT32, .rank = 2, .dims = {1, 180}};
+      nnfw_train_set_input(session, 0, test_input, &ti);
+      nnfw_train_set_expected(session, 0, test_target, nullptr);
+
+      float output[4];
+      nnfw_train_set_output(session, 0, NNFW_TYPE_TENSOR_FLOAT32, output, 4);
+      nnfw_train(session, false);
+      correct_predictions += (is_correct(4, output, test_target)) ? 1 : 0;
+    }
+    // Calculate and print accuracy
+    float accuracy = (float)correct_predictions / num_train_data_samples;
+    printf("Accuracy: %f\n", accuracy);
+    if (accuracy > max_accuracy)
+    {
+      // Save best checkpoint
+      // train_interpreter.saveCheckpoint(config, checkpoints_path);
+      nnfw_train_export_checkpoint(session, checkpoints_path);
+      max_accuracy = accuracy;
+      std::cout << "Found better accuracy = " << max_accuracy << " in epoch = " << e + 1 << " / "
+                << training_epochs << "\n";
+    }
+  }
+
+  // Load best model
+  nnfw_train_import_checkpoint(session, checkpoints_path);
+
+  // Save final result
+  nnfw_train_export_circle(session, output_trained_file_path);
+
+  return EXIT_SUCCESS;
+}
+
+int entry(int argc, char **argv);
+
+#ifdef NDEBUG
+int main(int argc, char **argv)
+{
+  try
+  {
+    return entry(argc, argv);
+  }
+  catch (const std::exception &e)
+  {
+    std::cerr << "ERROR: " << e.what() << std::endl;
+  }
+
+  return 255;
+}
+#else  // NDEBUG
+int main(int argc, char **argv)
+{
+  // NOTE main does not catch internal exceptions for debug build to make it easy to
+  //      check the stacktrace with a debugger
+  return entry(argc, argv);
+}
+#endif // !NDEBUG
diff --git a/onert-micro/eval-driver/CMakeLists.txt b/onert-micro/eval-driver/CMakeLists.txt
index 3b5b84e8416..4beda51244c 100644
--- a/onert-micro/eval-driver/CMakeLists.txt
+++ b/onert-micro/eval-driver/CMakeLists.txt
@@ -27,3 +27,17 @@ target_link_libraries(onert_micro_training_eval_driver PUBLIC onert_micro_traini
 install(TARGETS onert_micro_training_eval_driver DESTINATION bin)
 
 message(STATUS "DONE training eval driver")
+
+set(SRCS_EVAL_API_TESTER ApiDriver.cpp)
+
+add_executable(onert_micro_api_eval_driver ${SRCS_EVAL_API_TESTER})
+
+# This variable is needed to separate standalone interpreter libraries from the libraries used in driver
+set(READER_SUFFIX "_driver")
+
+target_include_directories(onert_micro_api_eval_driver PUBLIC "${CMAKE_CURRENT_SOURCE_DIR}/onert_micro/include")
+target_link_libraries(onert_micro_api_eval_driver PUBLIC onert_micro_dev)
+
+install(TARGETS onert_micro_api_eval_driver DESTINATION bin)
+
+message(STATUS "DONE api eval driver")