From 8a6c277928fb5dffa7442a1df19fd01fe4aca3d3 Mon Sep 17 00:00:00 2001 From: Se7ven Date: Wed, 16 Oct 2024 18:59:48 +0200 Subject: [PATCH] Update CHANGELOG.md --- silabs-multiprotocol-ember/CHANGELOG.md | 226 +----------------------- 1 file changed, 5 insertions(+), 221 deletions(-) diff --git a/silabs-multiprotocol-ember/CHANGELOG.md b/silabs-multiprotocol-ember/CHANGELOG.md index e62764a..e58314f 100644 --- a/silabs-multiprotocol-ember/CHANGELOG.md +++ b/silabs-multiprotocol-ember/CHANGELOG.md @@ -1,227 +1,11 @@ # Changelog -## 2.4.5 -- Support Home Assistant Connect ZBT-1. - -## 2.4.4 -- Revert back to Silicon Labs Gecko SDK 4.3.1 while 4.4.0 instability is investigated. -- Backport firmware modifications for improved stability. -- Bump universal SiLabs flasher to 0.0.17 - -## 2.4.3 -- ⚠️ Zigbee2MQTT does not yet support this version of the Gecko SDK. Do not update if you are using Z2M! ⚠️. -- This is a re-release of 2.4.0 that is compatible only with Home Assistant Core 2024.1.0 and above. - -## 2.4.2 -- Bump universal SiLabs flasher to 0.0.16 so that firmware is successfully installed on startup. - -## 2.4.1 - -- Revert back to Silicon Labs Gecko SDK 4.3.1 to maintain compatibility with Home Assistant Core 2023.12.0 and Zigbee2MQTT. If you are running 2024.1.0 with ZHA, you don't have to downgrade. - -## 2.4.0 - -- Use Silicon Labs Gecko SDK 4.4.0 -- Bump universal SiLabs flasher to 0.0.16 -- Improved firmware configurations for Home Assistant Yellow and SkyConnect - for stability (without ZGP, with watchdog) - -## 2.3.2 - -- Update mDNSResponder to 1790.80.10 - -## 2.3.1 - -- Use Silicon Labs Gecko SDK 4.3.1 - -## 2.3.0 - -- Add patch with new REST API to reset the OTBR -- Bump universal SiLabs flasher to 0.0.13 - -## 2.2.0 - -- Use Silicon Labs Gecko SDK 4.3.0 - - With this we get the OTBR version from May 17th, along with Border Agent ID - support (required for Android and iOS APIs) -- Note: This update needs a new Multi-PAN firmware. Home Assistant SkyConnect and Yellow get automatically updated by this add-on. - -## 2.1.0 - -- Add REST API patches to fix a bugs and support deleting datasets - -## 2.0.0 - -- Update OpenThread REST API to latest upstreamed API variant - -## 1.1.3 - -- Use native zigbeed on x86-64/amd64 architecture -- Avoid deleting otbr-web user content twice - -## 1.1.2 - -- Use Silicon Labs Gecko SDK 4.2.3 -- Avoid starting mdnsd when OpenThread Border Router is not enabled - -## 1.1.1 - -- Bugfix: bump universal SiLabs flasher to 0.0.12 for amd64 - -## 1.1.0 - -- Use default baudrate of 460800 (WARNING: You MUST update your configuration!) -- Bump universal SiLabs flasher to 0.0.12 - -## 1.0.2 - -- Use Silicon Labs Gecko SDK 4.2.2 - ## 1.0.1 - -- Use host namespace for hostname (make sure that the BR is announced with the - systems real hostname) +- Update SimplicitySDK to v2024.6.2 ## 1.0.0 +- Initial release +- Simplicity SDK v2024.6.1-0 +- GeckoSDK v4.5.2 +- ember driver -- Remove Web UI via ingress (expose ports to use the Web UI, see documentation) -- Change vendor name to "Home Assistant" and product name to Silicon Labs - Multiprotocol" (used in OTBR mDNS/DNS-SD announcments) - -## 0.13.1 - -- Set default baudrate 115200 correctly -- Prevent OTBR discovery service from start when OTBR is disabled -- Fix REST API to correctly set the Connection HTTP header on amd64 -- Fix network device support (properly start socat if necessary) on amd64 - -## 0.13.0 - -- Use Silicon Labs Gecko SDK 4.2.1 -- Let the OTBR REST API listen on local interface only by default -- Automatically flash firmware by default -- Disable OTBR web interface by default (see documentation) -- Fix network device support (properly start socat if necessary) - -## 0.12.0 - -- Use Silicon Labs Gecko SDK 4.1.4 - -## 0.11.4 - -- Fix REST API to correctly set the Connection HTTP header - -## 0.11.3 - -- Fix REST API to return an HTTP compliant status line - -## 0.11.2 - -- Add OTBR discovery support - -## 0.11.1 - -- Update REST API with full active and pending dataset as well as state support - -## 0.11.0 - -- Use Silicon Labs Gecko SDK 4.2.0 - -## 0.10.0 - -- Add REST API to get and set the active dataset to the OpenThrad Border Router - -## 0.9.1 - -- Avoid start error in case multiple primary interfaces are returned -- Fix zigbeed argument parsing for 32-bit add-on -- Remove unnecessary error message "Cannot open file /usr/local/etc/zigbeed.conf" - -## 0.9.0 - -- Allow IPv6 forwarding explicitly (required for HAOS 9.x without firewall) -- Add OTBR firewall option (enabled by default, requires HAOS 9.4 or newer) -- Add egress firewall rules for forwarding -- Add fine grained OTBR log level control -- Fix service stop (finish) scripts - -## 0.8.1 - -- Bugfix: give GPIO permissions to container to allow flashing Yellow - -## 0.8.0 - -- Initial AMD64/x86-64 support (zigbeed via QEMU) -- Increase multicast table size to 16 (as expected by ZHA by default) - -## 0.7.2 - -- Fix OTBR enable flag (allow to disable the OTBR) -- Fix zigbeed and cpcd finish scripts -- Start banner after initialization scripts - -## 0.7.1 - -- Bump universal SiLabs flasher to 0.0.7 -- Use baudrate 115200 by default -- Add Docker health check to monitor zigbeed - -## 0.7.0 - -- Support firmware flashing for Home Assistant SkyConnect/Yellow -- Allow quick reconnects by ZHA (required during config flow) - -## 0.6.2 - -- Use Silicon Labs Gecko SDK 4.1.3 - -## 0.6.1 - -- Use Silicon Labs Gecko SDK 4.1.2 - -## 0.6.0 - -- Implement native TCP/IP support for zigbeed (requires bellows 0.34.0 or newer) -- Bind only to add-ons local address - -## 0.5.1 - -- Use Silicon Labs Gecko SDK 4.1.1 -- Readd aarch64 support - -## 0.5.0 - -- Use Silicon Labs Gecko SDK 4.1.0 -- Build zigbeed from source (as binaries are no longer provided) -- Bump OTBR to Silicon Labs forked version of Gecko SDK v4.1.0 - (based on OTBR POSIX version 3a98779dc9 (2022-06-02 09:34:58 -0700)) -- Use s6-overlay v3 style services -- Drop aarch64 support (all CPC communication blocks on aarch64 since 4.1.0) - -## 0.4.1 - -- Support network device (CPC daemon via TCP/IP socket) - -## 0.4.0 - -- Use Silicon Labs Gecko SDK 4.0.2 -- Enable native aarch64 support -- Support baudrate and hardware flow control - -## 0.3.1 - -- Fix permissions to make otbr-agent start correctly -- Add OpenThread Border Router web frontend via ingress - -## 0.3.0 - -- Initial OpenThread support - -## 0.2.0 - -- Use Silicon Labs Gecko SDK 4.0.1 -- Fix port description - -## 0.1.0 - -- initial version