build firmware ultimaker.

[samuelvincenzome]

Hi, My name is Samuel de Vincenzo and I built the printed circuit board as described in the PCBs File folder.
My question is how do I save the firmware on the card chip and what firmware can I use.

Thank you!

Samuel

[736984325]

you can use malin firmware by Arduino IDE,and you could visit some 3d printer websites to find more information

…

---Original--- From: "Samuel de Vincenzo"<[email protected]> Date: Wed, May 8, 2019 23:27 PM To: "Ultimaker/Ultimaker3"<[email protected]>; Cc: "Subscribed"<[email protected]>; Subject: [Ultimaker/Ultimaker3] build firmware ultimaker. (#2) Hi, My name is Samuel de Vincenzo and I built the printed circuit board as described in the PCBs File folder. My question is how do I save the firmware on the card chip and what firmware can I use. Thank you! Samuel — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

[Ghostkeeper]

@CoenSchalkwijk Wasn't there an image that you could download somewhere?

There are two firmwares: One is Marlin that goes on the microcontroller board, and the other is a Linux installation that goes on the main PCB. Installing firmware on the main computer should make it flash the microcontroller with the correct firmware as well.

[CoenSchalkwijk]

There's a .hex file in the image/swu file. This is the Marlin image for the main board of the printer, not the olimex board.

[Ghostkeeper]

Is it possible to download the main Olimex Linux image?

[CoenSchalkwijk]

Both are provided in a single package. It's currently not possible to just browse through our firmware repository. You'll need to know the exact version numbers you're looking for. Which are provided by a 'version.txt' file, which only points to the latest-and-greatest. @samuelvincenzome are you looking for the PCB/atmel firmware (a hex file, containing our Marlin implenentation) or controlling system firmware (a debian based linux image)?