Installing octodash on a raspberry pi5 with hyperpixel 4 leads to x11 seg fault

[p3dtows]

Describe the bug
instead of a nice octodash screen x11 seems to die and spill it's guts to the console.

To Reproduce
Steps to reproduce the behavior:

1. I installed raspian / raspberry pi os on an SD card via RP imager.
2. I installed octoprint via octoprint deploy because i didn't know about octoprint uptodate
3. i configured the hyperpixel with these directions dtoverlay=vc4-kms-dpi-hyperpixel4 and dtparam=rotate=90,touchscreen-swapped-x-y,touchscreen-inverted-y as per this hyperpixel github issue (which got me a working console in the correct orientation)
4. octoprint works and is successfully connected to our printer.
5. i installed octodash and used /home//OctoPrint
6. the octodash install errored out on my 1st run though (see log below) so i
7. ran the uninstall script and then ran the reinstall script. (not selecting any plugins this time) (see log below)
8. x11 crashes.
9. after this i tried adding the second bit (adding a 90-monitor.conf) of this post but it had no effect.

Expected behavior
working octodash

Screenshots
a screen shot of this problem can be seen on forums.pimoroni.com

General Information:
log of 1st install
sudo ./OctodashInstall.sh Installing OctoDash v2.3.1, aarch64 Installing Dependencies ... All packages are up to date. libgtk-3-0 is already the newest version (1:3.24.38-2~deb12u1+rpt6+rpi1). libgtk-3-0 set to manually installed. libnss3 is already the newest version (2:3.87.1-1). libnss3 set to manually installed. libxss1 is already the newest version (1:1.2.3-1). libxss1 set to manually installed. libxtst6 is already the newest version (2:1.2.3-1.1). libxtst6 set to manually installed. libatspi2.0-0 is already the newest version (2.50.0-1~bpo12+rpt1). libatspi2.0-0 set to manually installed. libuuid1 is already the newest version (2.38.1-5+deb12u1). The following additional packages will be installed: 9menu gldriver-test libauthen-sasl-perl libayatana-ido3-0.4-0 libayatana-indicator3-7 libclone-perl libdata-dump-perl libdbusmenu-glib4 libdbusmenu-gtk3-4 libencode-locale-perl libfile-basedir-perl libfile-desktopentry-perl libfile-listing-perl libfile-mimeinfo-perl libfont-afm-perl libfontenc1 libgles2 libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libio-html-perl libio-socket-ssl-perl libio-stringy-perl libipc-system-simple-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl libnet-dbus-perl libnet-http-perl libnet-smtp-ssl-perl libnet-ssleay-perl libpciaccess0 libpthread-stubs0-dev libregexp-ipv6-perl libsecret-common libtie-ixhash-perl libtimedate-perl libtry-tiny-perl liburi-perl libwww-perl libwww-robotrules-perl libx11-protocol-perl libxau-dev libxaw7 libxcb1-dev libxcvt0 libxdmcp-dev libxfont2 libxft2 libxkbfile1 libxml-parser-perl libxml-twig-perl libxml-xpathengine-perl libxmu6 libxt6 libxxf86dga1 menu perl-openssl-defaults x11-utils x11-xkb-utils x11proto-dev xcvt xfonts-base xfonts-encodings xfonts-utils xorg-sgml-doctools xserver-common xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-libinput xserver-xorg-input-wacom xserver-xorg-legacy xserver-xorg-video-all xserver-xorg-video-amdgpu xserver-xorg-video-ati xserver-xorg-video-fbdev xserver-xorg-video-nouveau xserver-xorg-video-radeon xserver-xorg-video-vesa xtrans-dev zutty Suggested packages: libdigest-hmac-perl libgssapi-perl libcrypt-ssleay-perl notification-daemon libsub-name-perl libbusiness-isbn-perl libauthen-ntlm-perl libx11-doc libxcb-doc libunicode-map8-perl libunicode-string-perl xml-twig-tools menu-l10n gksu | kde-cli-tools | ktsuss debhelper xbindkeys xclip mesa-utils nickle cairo-5c xorg-docs-core xfonts-100dpi | xfonts-75dpi xfonts-scalable xinput firmware-amd-graphics xserver-xorg-video-r128 xserver-xorg-video-mach64 The following NEW packages will be installed: 9menu bc desktop-file-utils gldriver-test libauthen-sasl-perl libavahi-compat-libdnssd1 libayatana-appindicator3-1 libayatana-ido3-0.4-0 libayatana-indicator3-7 libclone-perl libdata-dump-perl libdbusmenu-glib4 libdbusmenu-gtk3-4 libencode-locale-perl libfile-basedir-perl libfile-desktopentry-perl libfile-listing-perl libfile-mimeinfo-perl libfont-afm-perl libfontenc1 libgles2 libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libio-html-perl libio-socket-ssl-perl libio-stringy-perl libipc-system-simple-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl libnet-dbus-perl libnet-http-perl libnet-smtp-ssl-perl libnet-ssleay-perl libnotify4 libpam0g-dev libpciaccess0 libpthread-stubs0-dev libregexp-ipv6-perl libsecret-1-0 libsecret-common libtie-ixhash-perl libtimedate-perl libtry-tiny-perl liburi-perl libwww-perl libwww-robotrules-perl libx11-dev libx11-protocol-perl libxau-dev libxaw7 libxcb1-dev libxcvt0 libxdmcp-dev libxfont2 libxft2 libxkbfile1 libxml-parser-perl libxml-twig-perl libxml-xpathengine-perl libxmu6 libxt6 libxxf86dga1 menu perl-openssl-defaults ratpoison x11-utils x11-xkb-utils x11-xserver-utils x11proto-dev xcvt xdg-utils xfonts-base xfonts-encodings xfonts-utils xinit xorg-sgml-doctools xserver-common xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-libinput xserver-xorg-input-wacom xserver-xorg-legacy xserver-xorg-video-all xserver-xorg-video-amdgpu xserver-xorg-video-ati xserver-xorg-video-fbdev xserver-xorg-video-nouveau xserver-xorg-video-radeon xserver-xorg-video-vesa xtrans-dev zutty 0 upgraded, 101 newly installed, 0 to remove and 0 not upgraded. Need to get 24.1 MB of archives. After this operation, 48.2 MB of additional disk space will be used. Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package 9menu. (Reading database ... 72128 files and directories currently installed.) Preparing to unpack .../000-9menu_1.10-1_arm64.deb ... Unpacking 9menu (1.10-1) ... Selecting previously unselected package bc. Preparing to unpack .../001-bc_1.07.1-3_arm64.deb ... Unpacking bc (1.07.1-3) ... Selecting previously unselected package desktop-file-utils. Preparing to unpack .../002-desktop-file-utils_0.26-1_arm64.deb ... Unpacking desktop-file-utils (0.26-1) ... Selecting previously unselected package gldriver-test. Preparing to unpack .../003-gldriver-test_0.15_all.deb ... Unpacking gldriver-test (0.15) ... Selecting previously unselected package libauthen-sasl-perl. Preparing to unpack .../004-libauthen-sasl-perl_2.1600-3_all.deb ... Unpacking libauthen-sasl-perl (2.1600-3) ... Selecting previously unselected package libavahi-compat-libdnssd1:arm64. Preparing to unpack .../005-libavahi-compat-libdnssd1_0.8-10_arm64.deb ... Unpacking libavahi-compat-libdnssd1:arm64 (0.8-10) ... Selecting previously unselected package libayatana-ido3-0.4-0:arm64. Preparing to unpack .../006-libayatana-ido3-0.4-0_0.9.3-1_arm64.deb ... Unpacking libayatana-ido3-0.4-0:arm64 (0.9.3-1) ... Selecting previously unselected package libayatana-indicator3-7:arm64. Preparing to unpack .../007-libayatana-indicator3-7_0.9.3-1_arm64.deb ... Unpacking libayatana-indicator3-7:arm64 (0.9.3-1) ... Selecting previously unselected package libdbusmenu-glib4:arm64. Preparing to unpack .../008-libdbusmenu-glib4_18.10.20180917~bzr492+repack1-3_arm64.deb ... Unpacking libdbusmenu-glib4:arm64 (18.10.20180917~bzr492+repack1-3) ... Selecting previously unselected package libdbusmenu-gtk3-4:arm64. Preparing to unpack .../009-libdbusmenu-gtk3-4_18.10.20180917~bzr492+repack1-3_arm64.deb ... Unpacking libdbusmenu-gtk3-4:arm64 (18.10.20180917~bzr492+repack1-3) ... Selecting previously unselected package libayatana-appindicator3-1. Preparing to unpack .../010-libayatana-appindicator3-1_0.5.92-1_arm64.deb ... Unpacking libayatana-appindicator3-1 (0.5.92-1) ... Selecting previously unselected package libclone-perl:arm64. Preparing to unpack .../011-libclone-perl_0.46-1_arm64.deb ... Unpacking libclone-perl:arm64 (0.46-1) ... Selecting previously unselected package libdata-dump-perl. Preparing to unpack .../012-libdata-dump-perl_1.25-1_all.deb ... Unpacking libdata-dump-perl (1.25-1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../013-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../014-libipc-system-simple-perl_1.30-2_all.deb ... Unpacking libipc-system-simple-perl (1.30-2) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../015-libfile-basedir-perl_0.09-2_all.deb ... Unpacking libfile-basedir-perl (0.09-2) ... Selecting previously unselected package libregexp-ipv6-perl. Preparing to unpack .../016-libregexp-ipv6-perl_0.03-3_all.deb ... Unpacking libregexp-ipv6-perl (0.03-3) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../017-liburi-perl_5.17-1_all.deb ... Unpacking liburi-perl (5.17-1) ... Selecting previously unselected package libfile-desktopentry-perl. Preparing to unpack .../018-libfile-desktopentry-perl_0.22-3_all.deb ... Unpacking libfile-desktopentry-perl (0.22-3) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../019-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../020-libhttp-date-perl_6.05-2_all.deb ... Unpacking libhttp-date-perl (6.05-2) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../021-libfile-listing-perl_6.15-1_all.deb ... Unpacking libfile-listing-perl (6.15-1) ... Selecting previously unselected package libfile-mimeinfo-perl. Preparing to unpack .../022-libfile-mimeinfo-perl_0.33-1_all.deb ... Unpacking libfile-mimeinfo-perl (0.33-1) ... Selecting previously unselected package libfont-afm-perl. Preparing to unpack .../023-libfont-afm-perl_1.20-4_all.deb ... Unpacking libfont-afm-perl (1.20-4) ... Selecting previously unselected package libfontenc1:arm64. Preparing to unpack .../024-libfontenc1_1%3a1.1.4-1_arm64.deb ... Unpacking libfontenc1:arm64 (1:1.1.4-1) ... Selecting previously unselected package libgles2:arm64. Preparing to unpack .../025-libgles2_1.6.0-1_arm64.deb ... Unpacking libgles2:arm64 (1.6.0-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../026-libhtml-tagset-perl_3.20-6_all.deb ... Unpacking libhtml-tagset-perl (3.20-6) ... Selecting previously unselected package libhtml-parser-perl:arm64. Preparing to unpack .../027-libhtml-parser-perl_3.81-1_arm64.deb ... Unpacking libhtml-parser-perl:arm64 (3.81-1) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../028-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../029-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../030-libhttp-message-perl_6.44-1_all.deb ... Unpacking libhttp-message-perl (6.44-1) ... Selecting previously unselected package libhtml-form-perl. Preparing to unpack .../031-libhtml-form-perl_6.11-1_all.deb ... Unpacking libhtml-form-perl (6.11-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../032-libhtml-tree-perl_5.07-3_all.deb ... Unpacking libhtml-tree-perl (5.07-3) ... Selecting previously unselected package libhtml-format-perl. Preparing to unpack .../033-libhtml-format-perl_2.16-2_all.deb ... Unpacking libhtml-format-perl (2.16-2) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../034-libhttp-cookies-perl_6.10-1_all.deb ... Unpacking libhttp-cookies-perl (6.10-1) ... Selecting previously unselected package libhttp-daemon-perl. Preparing to unpack .../035-libhttp-daemon-perl_6.16-1_all.deb ... Unpacking libhttp-daemon-perl (6.16-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../036-libhttp-negotiate-perl_6.01-2_all.deb ... Unpacking libhttp-negotiate-perl (6.01-2) ... Selecting previously unselected package perl-openssl-defaults:arm64. Preparing to unpack .../037-perl-openssl-defaults_7+b1_arm64.deb ... Unpacking perl-openssl-defaults:arm64 (7+b1) ... Selecting previously unselected package libnet-ssleay-perl:arm64. Preparing to unpack .../038-libnet-ssleay-perl_1.92-2+b1_arm64.deb ... Unpacking libnet-ssleay-perl:arm64 (1.92-2+b1) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../039-libio-socket-ssl-perl_2.081-2_all.deb ... Unpacking libio-socket-ssl-perl (2.081-2) ... Selecting previously unselected package libio-stringy-perl. Preparing to unpack .../040-libio-stringy-perl_2.111-3_all.deb ... Unpacking libio-stringy-perl (2.111-3) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../041-libnet-http-perl_6.22-1_all.deb ... Unpacking libnet-http-perl (6.22-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../042-libtry-tiny-perl_0.31-2_all.deb ... Unpacking libtry-tiny-perl (0.31-2) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../043-libwww-robotrules-perl_6.02-1_all.deb ... Unpacking libwww-robotrules-perl (6.02-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../044-libwww-perl_6.68-1_all.deb ... Unpacking libwww-perl (6.68-1) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../045-liblwp-protocol-https-perl_6.10-1_all.deb ... Unpacking liblwp-protocol-https-perl (6.10-1) ... Selecting previously unselected package libnet-smtp-ssl-perl. Preparing to unpack .../046-libnet-smtp-ssl-perl_1.04-2_all.deb ... Unpacking libnet-smtp-ssl-perl (1.04-2) ... Selecting previously unselected package libmailtools-perl. Preparing to unpack .../047-libmailtools-perl_2.21-2_all.deb ... Unpacking libmailtools-perl (2.21-2) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../048-libxml-parser-perl_2.46-4_arm64.deb ... Unpacking libxml-parser-perl (2.46-4) ... Selecting previously unselected package libxml-twig-perl. Preparing to unpack .../049-libxml-twig-perl_1%3a3.52-2_all.deb ... Unpacking libxml-twig-perl (1:3.52-2) ... Selecting previously unselected package libnet-dbus-perl. Preparing to unpack .../050-libnet-dbus-perl_1.2.0-2_arm64.deb ... Unpacking libnet-dbus-perl (1.2.0-2) ... Selecting previously unselected package libnotify4:arm64. Preparing to unpack .../051-libnotify4_0.8.1-1_arm64.deb ... Unpacking libnotify4:arm64 (0.8.1-1) ... Selecting previously unselected package libpam0g-dev:arm64. Preparing to unpack .../052-libpam0g-dev_1.5.2-6+rpt2+deb12u1_arm64.deb ... Unpacking libpam0g-dev:arm64 (1.5.2-6+rpt2+deb12u1) ... Selecting previously unselected package libpciaccess0:arm64. Preparing to unpack .../053-libpciaccess0_0.17-2_arm64.deb ... Unpacking libpciaccess0:arm64 (0.17-2) ... Selecting previously unselected package libpthread-stubs0-dev:arm64. Preparing to unpack .../054-libpthread-stubs0-dev_0.4-1_arm64.deb ... Unpacking libpthread-stubs0-dev:arm64 (0.4-1) ... Selecting previously unselected package libsecret-common. Preparing to unpack .../055-libsecret-common_0.20.5-3_all.deb ... Unpacking libsecret-common (0.20.5-3) ... Selecting previously unselected package libsecret-1-0:arm64. Preparing to unpack .../056-libsecret-1-0_0.20.5-3_arm64.deb ... Unpacking libsecret-1-0:arm64 (0.20.5-3) ... Selecting previously unselected package libtie-ixhash-perl. Preparing to unpack .../057-libtie-ixhash-perl_1.23-4_all.deb ... Unpacking libtie-ixhash-perl (1.23-4) ... Selecting previously unselected package xorg-sgml-doctools. Preparing to unpack .../058-xorg-sgml-doctools_1%3a1.11-1.1_all.deb ... Unpacking xorg-sgml-doctools (1:1.11-1.1) ... Selecting previously unselected package x11proto-dev. Preparing to unpack .../059-x11proto-dev_2022.1-1_all.deb ... Unpacking x11proto-dev (2022.1-1) ... Selecting previously unselected package libxau-dev:arm64. Preparing to unpack .../060-libxau-dev_1%3a1.0.9-1_arm64.deb ... Unpacking libxau-dev:arm64 (1:1.0.9-1) ... Selecting previously unselected package libxdmcp-dev:arm64. Preparing to unpack .../061-libxdmcp-dev_1%3a1.1.2-3_arm64.deb ... Unpacking libxdmcp-dev:arm64 (1:1.1.2-3) ... Selecting previously unselected package xtrans-dev. Preparing to unpack .../062-xtrans-dev_1.4.0-1_all.deb ... Unpacking xtrans-dev (1.4.0-1) ... Selecting previously unselected package libxcb1-dev:arm64. Preparing to unpack .../063-libxcb1-dev_1.15-1_arm64.deb ... Unpacking libxcb1-dev:arm64 (1.15-1) ... Selecting previously unselected package libx11-dev:arm64. Preparing to unpack .../064-libx11-dev_2%3a1.8.4-2+deb12u2_arm64.deb ... Unpacking libx11-dev:arm64 (2:1.8.4-2+deb12u2) ... Selecting previously unselected package libx11-protocol-perl. Preparing to unpack .../065-libx11-protocol-perl_0.56-9_all.deb ... Unpacking libx11-protocol-perl (0.56-9) ... Selecting previously unselected package libxt6:arm64. Preparing to unpack .../066-libxt6_1%3a1.2.1-1.1_arm64.deb ... Unpacking libxt6:arm64 (1:1.2.1-1.1) ... Selecting previously unselected package libxmu6:arm64. Preparing to unpack .../067-libxmu6_2%3a1.1.3-3_arm64.deb ... Unpacking libxmu6:arm64 (2:1.1.3-3) ... Selecting previously unselected package libxaw7:arm64. Preparing to unpack .../068-libxaw7_2%3a1.0.14-1_arm64.deb ... Unpacking libxaw7:arm64 (2:1.0.14-1) ... Selecting previously unselected package libxcvt0:arm64. Preparing to unpack .../069-libxcvt0_0.1.2-1_arm64.deb ... Unpacking libxcvt0:arm64 (0.1.2-1) ... Selecting previously unselected package libxfont2:arm64. Preparing to unpack .../070-libxfont2_1%3a2.0.6-1_arm64.deb ... Unpacking libxfont2:arm64 (1:2.0.6-1) ... Selecting previously unselected package libxft2:arm64. Preparing to unpack .../071-libxft2_2.3.6-1_arm64.deb ... Unpacking libxft2:arm64 (2.3.6-1) ... Selecting previously unselected package libxkbfile1:arm64. Preparing to unpack .../072-libxkbfile1_1%3a1.1.0-1_arm64.deb ... Unpacking libxkbfile1:arm64 (1:1.1.0-1) ... Selecting previously unselected package libxml-xpathengine-perl. Preparing to unpack .../073-libxml-xpathengine-perl_0.14-2_all.deb ... Unpacking libxml-xpathengine-perl (0.14-2) ... Selecting previously unselected package libxxf86dga1:arm64. Preparing to unpack .../074-libxxf86dga1_2%3a1.1.5-1_arm64.deb ... Unpacking libxxf86dga1:arm64 (2:1.1.5-1) ... Selecting previously unselected package menu. Preparing to unpack .../075-menu_2.1.49_arm64.deb ... Unpacking menu (2.1.49) ... Selecting previously unselected package ratpoison. Preparing to unpack .../076-ratpoison_1.4.9-1_arm64.deb ... Unpacking ratpoison (1.4.9-1) ... Selecting previously unselected package x11-utils. Preparing to unpack .../077-x11-utils_7.7+5_arm64.deb ... Unpacking x11-utils (7.7+5) ... Selecting previously unselected package x11-xkb-utils. Preparing to unpack .../078-x11-xkb-utils_7.7+7_arm64.deb ... Unpacking x11-xkb-utils (7.7+7) ... Selecting previously unselected package x11-xserver-utils. Preparing to unpack .../079-x11-xserver-utils_7.7+9+b1_arm64.deb ... Unpacking x11-xserver-utils (7.7+9+b1) ... Selecting previously unselected package xcvt. Preparing to unpack .../080-xcvt_0.1.2-1_arm64.deb ... Unpacking xcvt (0.1.2-1) ... Selecting previously unselected package xdg-utils. Preparing to unpack .../081-xdg-utils_1.1.3-4.1_all.deb ... Unpacking xdg-utils (1.1.3-4.1) ... Selecting previously unselected package xfonts-encodings. Preparing to unpack .../082-xfonts-encodings_1%3a1.0.4-2.2_all.deb ... Unpacking xfonts-encodings (1:1.0.4-2.2) ... Selecting previously unselected package xfonts-utils. Preparing to unpack .../083-xfonts-utils_1%3a7.7+6_arm64.deb ... Unpacking xfonts-utils (1:7.7+6) ... Selecting previously unselected package xfonts-base. Preparing to unpack .../084-xfonts-base_1%3a1.0.5+nmu1_all.deb ... Unpacking xfonts-base (1:1.0.5+nmu1) ... Selecting previously unselected package xinit. Preparing to unpack .../085-xinit_1.4.0-1_arm64.deb ... Unpacking xinit (1.4.0-1) ... Selecting previously unselected package xserver-common. Preparing to unpack .../086-xserver-common_2%3a21.1.7-3+rpt2+deb12u7_all.deb ... Unpacking xserver-common (2:21.1.7-3+rpt2+deb12u7) ... Selecting previously unselected package xserver-xorg-core. Preparing to unpack .../087-xserver-xorg-core_2%3a21.1.7-3+rpt2+deb12u7_arm64.deb ... Unpacking xserver-xorg-core (2:21.1.7-3+rpt2+deb12u7) ... Selecting previously unselected package xserver-xorg-video-amdgpu. Preparing to unpack .../088-xserver-xorg-video-amdgpu_23.0.0-1_arm64.deb ... Unpacking xserver-xorg-video-amdgpu (23.0.0-1) ... Selecting previously unselected package xserver-xorg-video-radeon. Preparing to unpack .../089-xserver-xorg-video-radeon_1%3a19.1.0-3_arm64.deb ... Unpacking xserver-xorg-video-radeon (1:19.1.0-3) ... Selecting previously unselected package xserver-xorg-video-ati. Preparing to unpack .../090-xserver-xorg-video-ati_1%3a19.1.0-3_arm64.deb ... Unpacking xserver-xorg-video-ati (1:19.1.0-3) ... Selecting previously unselected package xserver-xorg-video-fbdev. Preparing to unpack .../091-xserver-xorg-video-fbdev_1%3a0.5.0-2_arm64.deb ... Unpacking xserver-xorg-video-fbdev (1:0.5.0-2) ... Selecting previously unselected package xserver-xorg-video-nouveau. Preparing to unpack .../092-xserver-xorg-video-nouveau_1%3a1.0.17-2_arm64.deb ... Unpacking xserver-xorg-video-nouveau (1:1.0.17-2) ... Selecting previously unselected package xserver-xorg-video-vesa. Preparing to unpack .../093-xserver-xorg-video-vesa_1%3a2.5.0-1+b1_arm64.deb ... Unpacking xserver-xorg-video-vesa (1:2.5.0-1+b1) ... Selecting previously unselected package xserver-xorg-video-all. Preparing to unpack .../094-xserver-xorg-video-all_1%3a7.7+23_arm64.deb ... Unpacking xserver-xorg-video-all (1:7.7+23) ... Selecting previously unselected package xserver-xorg-input-libinput. Preparing to unpack .../095-xserver-xorg-input-libinput_1.2.1-1+b1_arm64.deb ... Unpacking xserver-xorg-input-libinput (1.2.1-1+b1) ... Selecting previously unselected package xserver-xorg-input-all. Preparing to unpack .../096-xserver-xorg-input-all_1%3a7.7+23_arm64.deb ... Unpacking xserver-xorg-input-all (1:7.7+23) ... Selecting previously unselected package xserver-xorg-input-wacom. Preparing to unpack .../097-xserver-xorg-input-wacom_1.1.0-1_arm64.deb ... Unpacking xserver-xorg-input-wacom (1.1.0-1) ... Selecting previously unselected package xserver-xorg. Preparing to unpack .../098-xserver-xorg_1%3a7.7+23_arm64.deb ... Unpacking xserver-xorg (1:7.7+23) ... Selecting previously unselected package xserver-xorg-legacy. Preparing to unpack .../099-xserver-xorg-legacy_2%3a21.1.7-3+rpt2+deb12u7_arm64.deb ... Unpacking xserver-xorg-legacy (2:21.1.7-3+rpt2+deb12u7) ... Selecting previously unselected package zutty. Preparing to unpack .../100-zutty_0.14.0.20230218+dfsg1-1_arm64.deb ... Unpacking zutty (0.14.0.20230218+dfsg1-1) ... Setting up 9menu (1.10-1) ... Setting up xinit (1.4.0-1) ... Setting up libpciaccess0:arm64 (0.17-2) ... Setting up gldriver-test (0.15) ... Created symlink /etc/systemd/system/multi-user.target.wants/glamor-test.service → /lib/systemd/system/glamor-test.service. Created symlink /etc/systemd/system/multi-user.target.wants/rp1-test.service → /lib/systemd/system/rp1-test.service. Setting up libxft2:arm64 (2.3.6-1) ... Setting up libtie-ixhash-perl (1.23-4) ... Setting up desktop-file-utils (0.26-1) ... Setting up libfont-afm-perl (1.20-4) ... Setting up libpam0g-dev:arm64 (1.5.2-6+rpt2+deb12u1) ... Setting up ratpoison (1.4.9-1) ... update-alternatives: using /usr/bin/ratpoison to provide /usr/bin/x-window-manager (x-window-manager) in auto mode Setting up libclone-perl:arm64 (0.46-1) ... Setting up libio-stringy-perl (2.111-3) ... Setting up libhtml-tagset-perl (3.20-6) ... Setting up libauthen-sasl-perl (2.1600-3) ... Setting up libdbusmenu-glib4:arm64 (18.10.20180917~bzr492+repack1-3) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libtry-tiny-perl (0.31-2) ... Setting up libxxf86dga1:arm64 (2:1.1.5-1) ... Setting up perl-openssl-defaults:arm64 (7+b1) ... Setting up bc (1.07.1-3) ... Setting up libencode-locale-perl (1.05-3) ... Setting up libavahi-compat-libdnssd1:arm64 (0.8-10) ... Setting up libayatana-ido3-0.4-0:arm64 (0.9.3-1) ... Setting up libpthread-stubs0-dev:arm64 (0.4-1) ... Setting up xtrans-dev (1.4.0-1) ... Setting up libfontenc1:arm64 (1:1.1.4-1) ... Setting up libgles2:arm64 (1.6.0-1) ... Setting up libdata-dump-perl (1.25-1) ... Setting up libipc-system-simple-perl (1.30-2) ... Setting up libxml-xpathengine-perl (0.14-2) ... Setting up libnotify4:arm64 (0.8.1-1) ... Setting up xfonts-encodings (1:1.0.4-2.2) ... Setting up libio-html-perl (1.004-3) ... Setting up libxt6:arm64 (1:1.2.1-1.1) ... Setting up libtimedate-perl (2.3300-2) ... Setting up libregexp-ipv6-perl (0.03-3) ... Setting up libxcvt0:arm64 (0.1.2-1) ... Setting up xorg-sgml-doctools (1:1.11-1.1) ... Setting up libxkbfile1:arm64 (1:1.1.0-1) ... Setting up menu (2.1.49) ... Setting up libayatana-indicator3-7:arm64 (0.9.3-1) ... Setting up libxfont2:arm64 (1:2.0.6-1) ... Setting up xdg-utils (1.1.3-4.1) ... update-alternatives: using /usr/bin/xdg-open to provide /usr/bin/open (open) in auto mode Setting up liburi-perl (5.17-1) ... Setting up libx11-protocol-perl (0.56-9) ... Setting up libsecret-common (0.20.5-3) ... Setting up libnet-ssleay-perl:arm64 (1.92-2+b1) ... Setting up libhttp-date-perl (6.05-2) ... Setting up libdbusmenu-gtk3-4:arm64 (18.10.20180917~bzr492+repack1-3) ... Setting up libxmu6:arm64 (2:1.1.3-3) ... Setting up libfile-basedir-perl (0.09-2) ... Setting up libfile-listing-perl (6.15-1) ... Setting up libnet-http-perl (6.22-1) ... Setting up libxaw7:arm64 (2:1.0.14-1) ... Setting up xfonts-utils (1:7.7+6) ... Setting up x11-xserver-utils (7.7+9+b1) ... Setting up xcvt (0.1.2-1) ... Setting up xfonts-base (1:1.0.5+nmu1) ... Setting up libsecret-1-0:arm64 (0.20.5-3) ... Setting up libayatana-appindicator3-1 (0.5.92-1) ... Setting up libfile-desktopentry-perl (0.22-3) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up zutty (0.14.0.20230218+dfsg1-1) ... update-alternatives: using /usr/bin/zutty to provide /usr/bin/x-terminal-emulator (x-terminal-emulator) in auto mode Setting up libhtml-parser-perl:arm64 (3.81-1) ... Setting up x11-utils (7.7+5) ... Setting up libio-socket-ssl-perl (2.081-2) ... Setting up libhttp-message-perl (6.44-1) ... Setting up libhtml-form-perl (6.11-1) ... Setting up libfile-mimeinfo-perl (0.33-1) ... Setting up libhttp-negotiate-perl (6.01-2) ... Setting up libhttp-cookies-perl (6.10-1) ... Setting up x11-xkb-utils (7.7+7) ... Setting up libhtml-tree-perl (5.07-3) ... Setting up libhtml-format-perl (2.16-2) ... Setting up libnet-smtp-ssl-perl (1.04-2) ... Setting up libmailtools-perl (2.21-2) ... Setting up libhttp-daemon-perl (6.16-1) ... Setting up xserver-common (2:21.1.7-3+rpt2+deb12u7) ... Setting up xserver-xorg-legacy (2:21.1.7-3+rpt2+deb12u7) ... Setting up xserver-xorg-core (2:21.1.7-3+rpt2+deb12u7) ... Setting up xserver-xorg-video-radeon (1:19.1.0-3) ... Setting up xserver-xorg-input-wacom (1.1.0-1) ... Setting up xserver-xorg-video-fbdev (1:0.5.0-2) ... Setting up xserver-xorg-video-vesa (1:2.5.0-1+b1) ... Setting up xserver-xorg-video-amdgpu (23.0.0-1) ... Setting up xserver-xorg (1:7.7+23) ... Setting up xserver-xorg-video-nouveau (1:1.0.17-2) ... Setting up xserver-xorg-input-libinput (1.2.1-1+b1) ... Setting up xserver-xorg-video-ati (1:19.1.0-3) ... Setting up xserver-xorg-video-all (1:7.7+23) ... Setting up xserver-xorg-input-all (1:7.7+23) ... Setting up liblwp-protocol-https-perl (6.10-1) ... Setting up libwww-perl (6.68-1) ... Setting up libxml-parser-perl (2.46-4) ... Setting up libxml-twig-perl (1:3.52-2) ... Setting up libnet-dbus-perl (1.2.0-2) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for sgml-base (1.31) ... Setting up x11proto-dev (2022.1-1) ... Processing triggers for fontconfig (2.14.1-4) ... Setting up libxau-dev:arm64 (1:1.0.9-1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u7) ... Setting up libxdmcp-dev:arm64 (1:1.1.2-3) ... Setting up libxcb1-dev:arm64 (1.15-1) ... Setting up libx11-dev:arm64 (2:1.8.4-2+deb12u2) ... Processing triggers for menu (2.1.49) ... Neither /home/pi/OctoPrint/venv nor /home/pi/oprint can be found. If your OctoPrint instance is running on a different machine just type - in the following prompt. ? Please specify OctoPrints full virtualenv path manually (no trailing slash). /home/octoadmin/OctoPrint ? Which plugins should I install (you can also install them via the Octoprint UI later)? OctoDash Companion, Display Layer Progress, Filament Manager, Spool Manager, Preheat Button, Enclosure, Print Time Genius, PrusaSlicer Thumbnails Installing Plugins... ERROR: Requested OctoPrint-SpoolManager==1.7.0 from https://github.com/OllisGit/OctoPrint-SpoolManager/releases/latest/download/master.zip has invalid metadata: Expected end or semicolon (after version specifier) pillow>=6.2.0<7.0.0 ~~~~~~~^ WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<pip._vendor.urllib3.connection.HTTPSConnection object at 0x7fffadf90a50>: Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')': /simple/rpi-gpio/ ? Should I enable CORS ? FYI, this is required by OctoDash v3 and OctoPrint 1.6.0, and may have security implications yes yes Enabling CORS ... Installing OctoDash v2.3.1, aarch64 ... dpkg-deb: error: unexpected end of file in archive magic version number in octodash.deb dpkg: error processing archive octodash.deb (--install): dpkg-deb --control subprocess returned error exit status 2 Errors were encountered while processing: octodash.deb ? Should I setup OctoDash to automatically start on boot? yes yes Setting up Autostart ... Setting up Console Autologin ... Setting Permissions ... OctoDash will start automatically on next reboot. Please ensure that auto-login is enabled! ? Should I setup the update script? This will allow installing '~/tmp/octodash.deb' without sudo or root access. For more info visit the Update section of the wiki. yes Setting up update script ... ? Shall I reboot your Pi now? yes OctoDash has been successfully installed! :)

log of uninstall:
sudo ./OctodashRemove.sh Removing OctoDash ... octodash: no process found (Reading database ... 74979 files and directories currently installed.) Removing octodash (2.3.1) ... Purging configuration files for octodash (2.3.1) ... Processing triggers for desktop-file-utils (0.26-1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... OctoDash has been removed :(. Please review your ~/.xinitrc and ~/.bashrc files to make sure everything got removed properly!

log of 2nd install:
sudo ./OctodashInstall.sh Installing OctoDash v2.3.1, aarch64 Installing Dependencies ... All packages are up to date. libgtk-3-0 is already the newest version (1:3.24.38-2~deb12u1+rpt6+rpi1). libnotify4 is already the newest version (0.8.1-1). libnss3 is already the newest version (2:3.87.1-1). libxss1 is already the newest version (1:1.2.3-1). libxtst6 is already the newest version (2:1.2.3-1.1). xdg-utils is already the newest version (1.1.3-4.1). libatspi2.0-0 is already the newest version (2.50.0-1~bpo12+rpt1). libuuid1 is already the newest version (2.38.1-5+deb12u1). libayatana-appindicator3-1 is already the newest version (0.5.92-1). libsecret-1-0 is already the newest version (0.20.5-3). xserver-xorg is already the newest version (1:7.7+23). ratpoison is already the newest version (1.4.9-1). x11-xserver-utils is already the newest version (7.7+9+b1). xinit is already the newest version (1.4.0-1). bc is already the newest version (1.07.1-3). desktop-file-utils is already the newest version (0.26-1). libavahi-compat-libdnssd1 is already the newest version (0.8-10). libpam0g-dev is already the newest version (1.5.2-6+rpt2+deb12u1). libx11-dev is already the newest version (2:1.8.4-2+deb12u2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Neither /home/pi/OctoPrint/venv nor /home/pi/oprint can be found. If your OctoPrint instance is running on a different machine just type - in the following prompt. ? Please specify OctoPrints full virtualenv path manually (no trailing slash). /home/octoadmin/OctoPrint ? Which plugins should I install (you can also install them via the Octoprint UI later)? (Press <space> to select, <enter> to finalize) Installing Plugins... Installing OctoDash v2.3.1, aarch64 ... octodash.deb 100%[=================================================>] 71.88M 8.77MB/s in 8.3s Selecting previously unselected package octodash. (Reading database ... 74896 files and directories currently installed.) Preparing to unpack octodash.deb ... Unpacking octodash (2.3.1) ... Setting up octodash (2.3.1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for desktop-file-utils (0.26-1) ... ? Should I setup OctoDash to automatically start on boot? yes yes Setting up Autostart ... Setting up Console Autologin ... Setting Permissions ... OctoDash will start automatically on next reboot. Please ensure that auto-login is enabled! ? Should I setup the update script? This will allow installing '~/tmp/octodash.deb' without sudo or root access. For more info visit the Update section of the wiki. (Use arrow keys) yes Setting up update script ... ? Shall I reboot your Pi now? yes OctoDash has been successfully installed! :)

Xorg log:
`/var/log $ cat Xorg.0.log
[ 17.922]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[ 17.925] Current Operating System: Linux octoprint 6.6.31+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64
[ 17.925] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:1F:DA:E0 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=bbb341df-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 17.926] xorg-server 2:21.1.7-3+rpt2+deb12u7 (https://www.debian.org/support)
[ 17.926] Current version of pixman: 0.42.2
[ 17.927] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.927] Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.929] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 24 16:07:27 2024
[ 17.930] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.930] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.930] (==) No Layout section. Using the first Screen section.
[ 17.931] (==) No screen section available. Using defaults.
[ 17.931] () |-->Screen "Default Screen Section" (0)
[ 17.931] () | |-->Monitor ""
[ 17.931] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.931] () Option "Debug" "dmabuf_capable"
[ 17.931] (==) Automatically adding devices
[ 17.931] (==) Automatically enabling devices
[ 17.931] (==) Automatically adding GPU devices
[ 17.931] (==) Automatically binding GPU devices
[ 17.931] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 17.931] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 17.931] Entry deleted from font path.
[ 17.931] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 17.931] Entry deleted from font path.
[ 17.931] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 17.931] Entry deleted from font path.
[ 17.931] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 17.931] Entry deleted from font path.
[ 17.931] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 17.931] Entry deleted from font path.
[ 17.931] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 17.931] Entry deleted from font path.
[ 17.931] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 17.931] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.931] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.931] (II) Loader magic: 0x555599d30ef0
[ 17.931] (II) Module ABI versions:
[ 17.931] X.Org ANSI C Emulation: 0.4
[ 17.931] X.Org Video Driver: 25.2
[ 17.931] X.Org XInput driver : 24.4
[ 17.931] X.Org Server Extension : 10.0
[ 17.931] (--) using VT number 2

[ 17.931] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 17.932] (II) xfree86: Adding drm device (/dev/dri/card2)
[ 17.932] (II) Platform probe for /sys/devices/platform/axi/1000120000.pcie/1f00148000.dpi/drm/card2
[ 17.934] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17.934] (II) Platform probe for /sys/devices/platform/axi/1002000000.v3d/drm/card0
[ 17.934] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 17.934] (II) Platform probe for /sys/devices/platform/axi/axi:gpu/drm/card1
[ 17.935] (II) no primary bus or device found
[ 17.935] falling back to /sys/devices/platform/axi/1000120000.pcie/1f00148000.dpi/drm/card2
[ 17.935] (II) LoadModule: "glx"
[ 17.935] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.936] (II) Module glx: vendor="X.Org Foundation"
[ 17.936] compiled for 1.21.1.7, module version = 1.0.0
[ 17.936] ABI class: X.Org Server Extension, version 10.0
[ 17.936] (==) Matched modesetting as autoconfigured driver 0
[ 17.936] (==) Matched fbdev as autoconfigured driver 1
[ 17.936] (==) Assigned the driver to the xf86ConfigLayout
[ 17.936] (II) LoadModule: "modesetting"
[ 17.936] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 17.936] (II) Module modesetting: vendor="X.Org Foundation"
[ 17.936] compiled for 1.21.1.7, module version = 1.21.1
[ 17.936] Module class: X.Org Video Driver
[ 17.936] ABI class: X.Org Video Driver, version 25.2
[ 17.936] (II) LoadModule: "fbdev"
[ 17.936] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 17.937] (II) Module fbdev: vendor="X.Org Foundation"
[ 17.937] compiled for 1.21.1.3, module version = 0.5.0
[ 17.937] Module class: X.Org Video Driver
[ 17.937] ABI class: X.Org Video Driver, version 25.2
[ 17.937] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 17.937] (II) FBDEV: driver for framebuffer: fbdev
[ 17.967] (II) modeset(0): using drv /dev/dri/card2
[ 17.967] (WW) Falling back to old probe method for fbdev
[ 17.967] (II) Loading sub module "fbdevhw"
[ 17.967] (II) LoadModule: "fbdevhw"
[ 17.968] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 17.968] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 17.968] compiled for 1.21.1.7, module version = 0.0.2
[ 17.968] ABI class: X.Org Video Driver, version 25.2
[ 17.968] (II) modeset(G0): using drv /dev/dri/card1
[ 17.968] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.968] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 17.968] (==) modeset(0): RGB weight 888
[ 17.968] (==) modeset(0): Default visual is TrueColor
[ 17.968] (II) Loading sub module "glamoregl"
[ 17.968] (II) LoadModule: "glamoregl"
[ 17.968] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17.971] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17.971] compiled for 1.21.1.7, module version = 1.0.1
[ 17.971] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.230] (II) modeset(0): glamor X acceleration enabled on V3D 7.1
[ 18.230] (II) modeset(0): glamor initialized
[ 18.230] (==) modeset(0): VariableRefresh: disabled
[ 18.230] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 18.230] (II) modeset(0): Output DPI-1 has no monitor section
[ 18.230] (II) modeset(0): EDID for output DPI-1
[ 18.230] (II) modeset(0): Printing probed modes for output DPI-1
[ 18.230] (II) modeset(0): Modeline "480x800"x60.1 32.00 480 490 506 565 800 815 928 943 -hsync -vsync (56.6 kHz eP)
[ 18.230] (II) modeset(0): Output DPI-1 connected
[ 18.230] (II) modeset(0): Using exact sizes for initial modes
[ 18.230] (II) modeset(0): Output DPI-1 using initial mode 480x800 +0+0
[ 18.230] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.230] (==) modeset(0): DPI set to (96, 96)
[ 18.230] (II) Loading sub module "fb"
[ 18.230] (II) LoadModule: "fb"
[ 18.230] (II) Module "fb" already built-in
[ 18.230] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.230] (==) modeset(G0): RGB weight 888
[ 18.230] (==) modeset(G0): Default visual is TrueColor
[ 18.230] (II) Loading sub module "glamoregl"
[ 18.230] (II) LoadModule: "glamoregl"
[ 18.230] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.230] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.230] compiled for 1.21.1.7, module version = 1.0.1
[ 18.230] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.470] (II) modeset(G0): glamor X acceleration enabled on V3D 7.1
[ 18.470] (II) modeset(G0): glamor initialized
[ 18.471] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 18.472] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 18.474] (II) modeset(G0): EDID for output HDMI-1-1
[ 18.475] (II) modeset(G0): EDID for output HDMI-1-2
[ 18.475] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.475] (==) modeset(G0): DPI set to (96, 96)
[ 18.475] (II) Loading sub module "fb"
[ 18.475] (II) LoadModule: "fb"
[ 18.475] (II) Module "fb" already built-in
[ 18.475] (II) UnloadModule: "fbdev"
[ 18.475] (II) Unloading fbdev
[ 18.475] (II) UnloadSubModule: "fbdevhw"
[ 18.475] (II) Unloading fbdevhw
[ 18.486] (==) modeset(0): Backing store enabled
[ 18.486] (==) modeset(0): Silken mouse enabled
[ 18.500] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 18.500] (==) modeset(0): DPMS enabled
[ 18.500] (II) modeset(0): [DRI2] Setup complete
[ 18.500] (II) modeset(0): [DRI2] DRI driver: drm-rp1-dpi
[ 18.500] (II) modeset(0): [DRI2] VDPAU driver: drm-rp1-dpi
[ 18.505] (==) modeset(G0): Backing store enabled
[ 18.505] (==) modeset(G0): Silken mouse enabled
[ 18.505] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 18.505] (==) modeset(G0): DPMS enabled
[ 18.505] (II) modeset(G0): [DRI2] Setup complete
[ 18.505] (II) modeset(G0): [DRI2] DRI driver: vc4
[ 18.505] (II) modeset(G0): [DRI2] VDPAU driver: vc4
[ 18.505] (II) Initializing extension Generic Event Extension
[ 18.505] (II) Initializing extension SHAPE
[ 18.506] (II) Initializing extension MIT-SHM
[ 18.506] (II) Initializing extension XInputExtension
[ 18.506] (II) Initializing extension XTEST
[ 18.506] (II) Initializing extension BIG-REQUESTS
[ 18.506] (II) Initializing extension SYNC
[ 18.506] (II) Initializing extension XKEYBOARD
[ 18.506] (II) Initializing extension XC-MISC
[ 18.506] (II) Initializing extension SECURITY
[ 18.506] (II) Initializing extension XFIXES
[ 18.506] (II) Initializing extension RENDER
[ 18.507] (II) Initializing extension RANDR
[ 18.507] (II) Initializing extension COMPOSITE
[ 18.507] (II) Initializing extension DAMAGE
[ 18.507] (II) Initializing extension MIT-SCREEN-SAVER
[ 18.507] (II) Initializing extension DOUBLE-BUFFER
[ 18.507] (II) Initializing extension RECORD
[ 18.507] (II) Initializing extension DPMS
[ 18.507] (II) Initializing extension Present
[ 18.507] (II) Initializing extension DRI3
[ 18.508] (II) Initializing extension X-Resource
[ 18.508] (II) Initializing extension XVideo
[ 18.508] (II) Initializing extension XVideo-MotionCompensation
[ 18.508] (II) Initializing extension SELinux
[ 18.508] (II) SELinux: Disabled on system
[ 18.508] (II) Initializing extension GLX
[ 18.736] (II) AIGLX: Loaded and initialized drm-rp1-dpi
[ 18.736] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.736] (II) Initializing extension XFree86-VidModeExtension
[ 18.736] (II) Initializing extension XFree86-DGA
[ 18.736] (II) Initializing extension XFree86-DRI
[ 18.736] (II) Initializing extension DRI2
[ 18.737] (II) modeset(G0): Damage tracking initialized
[ 18.737] (II) modeset(0): Damage tracking initialized
[ 18.737] (II) modeset(0): Setting screen physical size to 127 x 211
[ 18.767] (II) config/udev: Adding input device 11-005d Goodix Capacitive TouchScreen (/dev/input/event5)
[ 18.767] () 11-005d Goodix Capacitive TouchScreen: Applying InputClass "libinput keyboard catchall"
[ 18.767] () 11-005d Goodix Capacitive TouchScreen: Applying InputClass "libinput touchscreen catchall"
[ 18.767] (II) LoadModule: "libinput"
[ 18.767] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 18.769] (II) Module libinput: vendor="X.Org Foundation"
[ 18.769] compiled for 1.21.1.3, module version = 1.2.1
[ 18.769] Module class: X.Org XInput Driver
[ 18.769] ABI class: X.Org XInput driver, version 24.4
[ 18.769] (II) Using input driver 'libinput' for '11-005d Goodix Capacitive TouchScreen'
[ 18.769] () 11-005d Goodix Capacitive TouchScreen: always reports core events
[ 18.769] () Option "Device" "/dev/input/event5"
[ 18.771] (II) event5 - 11-005d Goodix Capacitive TouchScreen: is tagged by udev as: Keyboard Touchscreen
[ 18.771] (II) event5 - 11-005d Goodix Capacitive TouchScreen: device is a keyboard
[ 18.771] (II) event5 - 11-005d Goodix Capacitive TouchScreen: device is a touch device
[ 18.771] (II) event5 - 11-005d Goodix Capacitive TouchScreen: device removed
[ 18.792] (II) libinput: 11-005d Goodix Capacitive TouchScreen: needs a virtual subdevice
[ 18.792] () Option "config_info" "udev:/sys/devices/platform/i2c@0/i2c-11/11-005d/input/input3/event5"
[ 18.792] (II) XINPUT: Adding extended input device "11-005d Goodix Capacitive TouchScreen" (type: TOUCHSCREEN, id 6)
[ 18.792] () Option "AccelerationScheme" "none"
[ 18.792] () 11-005d Goodix Capacitive TouchScreen: (accel) selected scheme none/0
[ 18.792] () 11-005d Goodix Capacitive TouchScreen: (accel) acceleration factor: 2.000
[ 18.792] () 11-005d Goodix Capacitive TouchScreen: (accel) acceleration threshold: 4
[ 18.792] (II) event5 - 11-005d Goodix Capacitive TouchScreen: is tagged by udev as: Keyboard Touchscreen
[ 18.793] (II) event5 - 11-005d Goodix Capacitive TouchScreen: device is a keyboard
[ 18.793] (II) event5 - 11-005d Goodix Capacitive TouchScreen: device is a touch device
[ 18.793] (II) config/udev: Adding input device 11-005d Goodix Capacitive TouchScreen (/dev/input/mouse0)
[ 18.793] (II) No input driver specified, ignoring this device.
[ 18.793] (II) This device may have been added with another device file.
[ 18.793] (II) config/udev: Adding input device pwr_button (/dev/input/event0)
[ 18.793] () pwr_button: Applying InputClass "libinput keyboard catchall"
[ 18.793] (II) Using input driver 'libinput' for 'pwr_button'
[ 18.793] () pwr_button: always reports core events
[ 18.793] () Option "Device" "/dev/input/event0"
[ 18.794] (II) event0 - pwr_button: is tagged by udev as: Keyboard
[ 18.794] (II) event0 - pwr_button: device is a keyboard
[ 18.794] (II) event0 - pwr_button: device removed
[ 18.812] () Option "config_info" "udev:/sys/devices/platform/pwr_button/input/input0/event0"
[ 18.812] (II) XINPUT: Adding extended input device "pwr_button" (type: KEYBOARD, id 7)
[ 18.812] () Option "xkb_model" "pc105"
[ 18.812] () Option "xkb_layout" "us"
[ 18.812] (II) event0 - pwr_button: is tagged by udev as: Keyboard
[ 18.812] (II) event0 - pwr_button: device is a keyboard
[ 18.813] (II) config/udev: Adding input device vc4-hdmi-0 (/dev/input/event1)
[ 18.813] () vc4-hdmi-0: Applying InputClass "libinput keyboard catchall"
[ 18.813] (II) Using input driver 'libinput' for 'vc4-hdmi-0'
[ 18.813] () vc4-hdmi-0: always reports core events
[ 18.813] () Option "Device" "/dev/input/event1"
[ 18.813] (II) event1 - vc4-hdmi-0: is tagged by udev as: Keyboard Pointingstick
[ 18.814] (II) event1 - vc4-hdmi-0: device is a pointer
[ 18.814] (II) event1 - vc4-hdmi-0: device is a keyboard
[ 18.814] (II) event1 - vc4-hdmi-0: device removed
[ 18.832] (II) libinput: vc4-hdmi-0: needs a virtual subdevice
[ 18.832] () Option "config_info" "udev:/sys/devices/platform/soc/107c701400.hdmi/rc/rc0/input1/event1"
[ 18.832] (II) XINPUT: Adding extended input device "vc4-hdmi-0" (type: MOUSE, id 8)
[ 18.832] () Option "AccelerationScheme" "none"
[ 18.832] () vc4-hdmi-0: (accel) selected scheme none/0
[ 18.832] () vc4-hdmi-0: (accel) acceleration factor: 2.000
[ 18.832] () vc4-hdmi-0: (accel) acceleration threshold: 4
[ 18.833] (II) event1 - vc4-hdmi-0: is tagged by udev as: Keyboard Pointingstick
[ 18.833] (II) event1 - vc4-hdmi-0: device is a pointer
[ 18.833] (II) event1 - vc4-hdmi-0: device is a keyboard
[ 18.833] (II) config/udev: Adding input device vc4-hdmi-0 HDMI Jack (/dev/input/event2)
[ 18.833] (II) No input driver specified, ignoring this device.
[ 18.833] (II) This device may have been added with another device file.
[ 18.834] (II) config/udev: Adding input device vc4-hdmi-1 (/dev/input/event3)
[ 18.834] () vc4-hdmi-1: Applying InputClass "libinput keyboard catchall"
[ 18.834] (II) Using input driver 'libinput' for 'vc4-hdmi-1'
[ 18.834] () vc4-hdmi-1: always reports core events
[ 18.834] () Option "Device" "/dev/input/event3"
[ 18.834] (II) event3 - vc4-hdmi-1: is tagged by udev as: Keyboard Pointingstick
[ 18.834] (II) event3 - vc4-hdmi-1: device is a pointer
[ 18.834] (II) event3 - vc4-hdmi-1: device is a keyboard
[ 18.835] (II) event3 - vc4-hdmi-1: device removed
[ 18.852] (II) libinput: vc4-hdmi-1: needs a virtual subdevice
[ 18.852] () Option "config_info" "udev:/sys/devices/platform/soc/107c706400.hdmi/rc/rc1/input4/event3"
[ 18.852] (II) XINPUT: Adding extended input device "vc4-hdmi-1" (type: MOUSE, id 9)
[ 18.852] () Option "AccelerationScheme" "none"
[ 18.852] () vc4-hdmi-1: (accel) selected scheme none/0
[ 18.852] () vc4-hdmi-1: (accel) acceleration factor: 2.000
[ 18.852] () vc4-hdmi-1: (accel) acceleration threshold: 4
[ 18.852] (II) event3 - vc4-hdmi-1: is tagged by udev as: Keyboard Pointingstick
[ 18.853] (II) event3 - vc4-hdmi-1: device is a pointer
[ 18.853] (II) event3 - vc4-hdmi-1: device is a keyboard
[ 18.853] (II) config/udev: Adding input device vc4-hdmi-1 HDMI Jack (/dev/input/event4)
[ 18.853] (II) No input driver specified, ignoring this device.
[ 18.853] (II) This device may have been added with another device file.
[ 18.867] () 11-005d Goodix Capacitive TouchScreen: Applying InputClass "libinput keyboard catchall"
[ 18.867] () 11-005d Goodix Capacitive TouchScreen: Applying InputClass "libinput touchscreen catchall"
[ 18.867] (II) Using input driver 'libinput' for '11-005d Goodix Capacitive TouchScreen'
[ 18.867] () 11-005d Goodix Capacitive TouchScreen: always reports core events
[ 18.867] () Option "Device" "/dev/input/event5"
[ 18.867] (II) libinput: 11-005d Goodix Capacitive TouchScreen: is a virtual subdevice
[ 18.867] () Option "config_info" "udev:/sys/devices/platform/i2c@0/i2c-11/11-005d/input/input3/event5"
[ 18.867] (II) XINPUT: Adding extended input device "11-005d Goodix Capacitive TouchScreen" (type: KEYBOARD, id 10)
[ 18.867] () Option "xkb_model" "pc105"
[ 18.867] () Option "xkb_layout" "us"
[ 18.867] () vc4-hdmi-0: Applying InputClass "libinput keyboard catchall"
[ 18.867] (II) Using input driver 'libinput' for 'vc4-hdmi-0'
[ 18.867] () vc4-hdmi-0: always reports core events
[ 18.867] () Option "Device" "/dev/input/event1"
[ 18.867] (II) libinput: vc4-hdmi-0: is a virtual subdevice
[ 18.867] () Option "config_info" "udev:/sys/devices/platform/soc/107c701400.hdmi/rc/rc0/input1/event1"
[ 18.867] (II) XINPUT: Adding extended input device "vc4-hdmi-0" (type: KEYBOARD, id 11)
[ 18.867] () Option "xkb_model" "pc105"
[ 18.867] () Option "xkb_layout" "us"
[ 18.867] () vc4-hdmi-1: Applying InputClass "libinput keyboard catchall"
[ 18.867] (II) Using input driver 'libinput' for 'vc4-hdmi-1'
[ 18.867] () vc4-hdmi-1: always reports core events
[ 18.867] () Option "Device" "/dev/input/event3"
[ 18.867] (II) libinput: vc4-hdmi-1: is a virtual subdevice
[ 18.867] () Option "config_info" "udev:/sys/devices/platform/soc/107c706400.hdmi/rc/rc1/input4/event3"
[ 18.867] (II) XINPUT: Adding extended input device "vc4-hdmi-1" (type: KEYBOARD, id 12)
[ 18.867] () Option "xkb_model" "pc105"
[ 18.867] () Option "xkb_layout" "us"
[ 18.918] (II) event0 - pwr_button: device removed
[ 18.944] (II) event5 - 11-005d Goodix Capacitive TouchScreen: device removed
[ 18.972] (II) event1 - vc4-hdmi-0: device removed
[ 18.992] (II) event3 - vc4-hdmi-1: device removed
[ 19.017] (II) UnloadModule: "libinput"
[ 19.017] (II) UnloadModule: "libinput"
[ 19.018] (II) UnloadModule: "libinput"
[ 19.018] (II) UnloadModule: "libinput"
[ 19.018] (II) UnloadModule: "libinput"
[ 19.018] (II) UnloadModule: "libinput"
[ 19.018] (II) UnloadModule: "libinput"
[ 19.135] (II) Server terminated successfully (0). Closing log file.`