Feature request regarding export window

[perfrank]

Export window is only visibel when actually exporting.
It would be nice to be able to have it permanently visible, as I use it a lot for a quick overview.
Could be controlled by a tick-off in settings.
Else a great product!

[ArnieO]

Hi,
You can achieve exactly that in the "User interface" tile on the config page.
Simply change settings from "Auto" to "Enabled". 😉

[perfrank]

Sorry, I was imprecise in my request. What I meant was the Real time calculation window.. When not exporting, is only shows "Consumption" and "Cost", and I would like it to show "Import" and "Export" permanently. Sorry for.the confusion. Med venlig hilsen / best regards Per Frank-Hansen Søvej 3 2665 Vallensbæk Strand +45 20837692 Den tirs. 14. maj 2024 kl. 11.38 skrev ArnieO ***@***.***>:

…

Hi, You can achieve exactly that in the "User interface" tile on the config page. Simply change settings from "Auto" to "Enabled". 😉 image.png (view on web) <https://github.com/UtilitechAS/amsreader-firmware/assets/10295178/804d41eb-0b49-435a-9d26-4052bbbd1d51> — Reply to this email directly, view it on GitHub <#793 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AI3K37W4OCYLMUJ2766XNTTZCHLQNAVCNFSM6AAAAABHVZHIR6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TIMZRGIYTE> . You are receiving this because you authored the thread.Message ID: <UtilitechAS/amsreader-firmware/repo-discussions/793/comments/9431212@ github.com>

[Noschvie]

After sunset / exporting the "Export" fields of "Real time calculation" disappear.

[ArnieO]

Ok, I see - and that is indeed a well-founded request and a good enhancement idea.
I think an improved logic here could be:

If the "Production" parameter in the "Meter" tile in the config is non-zero:

• The "Export gauge" should be set to "Enabled" (not "Auto")
• The "Export" section of the "Real time calculation" tile should always be shown

Agreed?

I'll make sure this enhancement gets noted for the next firmware revision.
Thank you for your help!

[perfrank]

Exactly. And I want it to stay;-) Med venlig hilsen / best regards Per Frank-Hansen Søvej 3 2665 Vallensbæk Strand +45 20837692 Den tirs. 14. maj 2024 kl. 12.19 skrev Norbert ***@***.***>:

…

After sunset / exporting the "Export" fields of "Real time calculation" disappear. — Reply to this email directly, view it on GitHub <#793 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AI3K37QVFBHM7WB3O5OZZ63ZCHQLBAVCNFSM6AAAAABHVZHIR6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TIMZRGY2DG> . You are receiving this because you authored the thread.Message ID: <UtilitechAS/amsreader-firmware/repo-discussions/793/comments/9431643@ github.com>

[perfrank]

Yes, agreed! 😀 Thank You. Med venlig hilsen / best regards Per Frank-Hansen Søvej 3 2665 Vallensbæk Strand +45 20837692 Den tirs. 14. maj 2024 kl. 12.36 skrev ArnieO ***@***.***>:

…

Ok, I see - and that is indeed a well-founded request and a good enhancement idea. I think an improved logic here could be: If the "Production" parameter in the "Meter" tile in the config is non-zero: - The "Export gauge" should be set to "Enabled" (not "Auto") - The "Export" section of the "Real time calculation" tile should always be shown Agreed? I'll make sure this enhancement gets noted for the next firmware revision. Thank you for your help! — Reply to this email directly, view it on GitHub <#793 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AI3K37QLBAJ36DPWNB2DWV3ZCHSK7AVCNFSM6AAAAABHVZHIR6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TIMZRHA3TA> . You are receiving this because you authored the thread.Message ID: <UtilitechAS/amsreader-firmware/repo-discussions/793/comments/9431870@ github.com>

[gskjold]

Judging from this discussion and my current testing, you have not configured "Production" under "Meter" on the config page. Configure your peak production capacity here, and all the export data will be visible even after sunset

[perfrank]

Yes, that did the trick. Thank You very much. Med venlig hilsen / best regards Per Frank-Hansen Søvej 3 2665 Vallensbæk Strand +45 20837692 Den tors. 23. maj 2024 kl. 16.50 skrev Gunnar Skjold < ***@***.***>:

…

Judging from this discussion and my current testing, you have not configured "Production" under "Meter" on the config page. Configure your peak production capacity here, and all the export data will be visible even after sunset — Reply to this email directly, view it on GitHub <#793 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AI3K37VGZIEBMV7CNAJXHVTZDX62HAVCNFSM6AAAAABHVZHIR6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TKMZWGE3DM> . You are receiving this because you authored the thread.Message ID: <UtilitechAS/amsreader-firmware/repo-discussions/793/comments/9536166@ github.com>