diff --git a/README.md b/README.md index aa04312..4f61ced 100644 --- a/README.md +++ b/README.md @@ -11,6 +11,13 @@ Find the source code here: [XrayR-project/XrayR](https://github.com/XrayR-projec # 一键安装 +> [!IMPORTANT] +> 如果使用的是Alpine Linux，请事先使用以下命令安装脚本执行所需的依赖！ +> +> ``` +> apk add curl bash grep sed cat +> ``` + ``` bash <(curl -Ls https://raw.githubusercontent.com/XrayR-project/XrayR-release/master/install.sh) ``` diff --git a/XrayR b/XrayR new file mode 100644 index 0000000..354a0cb --- /dev/null +++ b/XrayR @@ -0,0 +1,14 @@ +#!/sbin/openrc-run + +name=$RC_SVCNAME +description="XrayR Service" +supervisor="supervise-daemon" +command="/usr/local/XrayR/XrayR" +command_args="--config /etc/XrayR/config.yml" +supervise_daemon_args=" -d /usr/local/XrayR/" +command_user="root:root" + +depend() { + after net dns + use net +} \ No newline at end of file diff --git a/XrayR.sh b/XrayR.sh index f420723..e69ad2f 100644 --- a/XrayR.sh +++ b/XrayR.sh @@ -13,6 +13,8 @@ version="v1.0.0" # check os if [[ -f /etc/redhat-release ]]; then release="centos" +elif [[ -f /etc/alpine-release ]]; then + release="alpine" elif cat /etc/issue | grep -Eqi "debian"; then release="debian" elif cat /etc/issue | grep -Eqi "ubuntu"; then @@ -25,6 +27,10 @@ elif cat /proc/version | grep -Eqi "ubuntu"; then release="ubuntu" elif cat /proc/version | grep -Eqi "centos|red hat|redhat"; then release="centos" +elif cat /proc/version | grep -Eqi "alpine"; then + release="alpine" +elif cat /etc/issue | grep -Eqi "alpine"; then + release="alpine" else echo -e "${red}未检测到系统版本，请联系脚本作者！${plain}\n" && exit 1 fi @@ -35,6 +41,7 @@ os_version="" if [[ -f /etc/os-release ]]; then os_version=$(awk -F'[= ."]' '/VERSION_ID/{print $3}' /etc/os-release) fi + if [[ -z "$os_version" && -f /etc/lsb-release ]]; then os_version=$(awk -F'[= ."]+' '/DISTRIB_RELEASE/{print $2}' /etc/lsb-release) fi @@ -45,12 +52,16 @@ if [[ x"${release}" == x"centos" ]]; then fi elif [[ x"${release}" == x"ubuntu" ]]; then if [[ ${os_version} -lt 16 ]]; then - echo -e "${red}请使用 Ubuntu 16 或更高版本的系统！${plain}\n" && exit 1 + echo -e "${red}请使用 Ubuntu 16.04 或更高版本的系统！${plain}\n" && exit 1 fi elif [[ x"${release}" == x"debian" ]]; then if [[ ${os_version} -lt 8 ]]; then echo -e "${red}请使用 Debian 8 或更高版本的系统！${plain}\n" && exit 1 fi +elif [[ x"${release}" == x"alpine" ]]; then + if [[ ${os_version} -lt 3.8 ]]; then + echo -e "${red}请使用 Alpine 3.8 或更高版本的系统！${plain}\n" && exit 1 + fi fi confirm() { @@ -149,11 +160,18 @@ uninstall() { fi return 0 fi - systemctl stop XrayR - systemctl disable XrayR - rm /etc/systemd/system/XrayR.service -f - systemctl daemon-reload - systemctl reset-failed + if [[ x"${release}" == x"alpine" ]]; then + service XrayR stop + rc-update delete XrayR + rm /etc/init.d/XrayR -f + else + systemctl stop XrayR + systemctl disable XrayR + rm /etc/systemd/system/XrayR.service -f + systemctl daemon-reload + systemctl reset-failed + fi + rm /etc/XrayR/ -rf rm /usr/local/XrayR/ -rf @@ -172,7 +190,11 @@ start() { echo "" echo -e "${green}XrayR已运行，无需再次启动，如需重启请选择重启${plain}" else - systemctl start XrayR + if [[ x"${release}" == x"alpine" ]]; then + service XrayR start + else + systemctl start XrayR + fi sleep 2 check_status if [[ $? == 0 ]]; then @@ -188,7 +210,11 @@ start() { } stop() { - systemctl stop XrayR + if [[ x"${release}" == x"alpine" ]]; then + service XrayR stop + else + systemctl stop XrayR + fi sleep 2 check_status if [[ $? == 1 ]]; then @@ -203,7 +229,11 @@ stop() { } restart() { - systemctl restart XrayR + if [[ x"${release}" == x"alpine" ]]; then + service XrayR restart + else + systemctl restart XrayR + fi sleep 2 check_status if [[ $? == 0 ]]; then @@ -217,14 +247,22 @@ restart() { } status() { - systemctl status XrayR --no-pager -l + if [[ x"${release}" == x"alpine" ]]; then + service XrayR status + else + systemctl status XrayR --no-pager -l + fi if [[ $# == 0 ]]; then before_show_menu fi } enable() { - systemctl enable XrayR + if [[ x"${release}" == x"alpine" ]]; then + rc-update add XrayR + else + systemctl enable XrayR + fi if [[ $? == 0 ]]; then echo -e "${green}XrayR 设置开机自启成功${plain}" else @@ -237,7 +275,11 @@ enable() { } disable() { - systemctl disable XrayR + if [[ x"${release}" == x"alpine" ]]; then + rc-update delete XrayR + else + systemctl disable XrayR + fi if [[ $? == 0 ]]; then echo -e "${green}XrayR 取消开机自启成功${plain}" else @@ -250,14 +292,26 @@ disable() { } show_log() { - journalctl -u XrayR.service -e --no-pager -f + if [[ x"${release}" == x"alpine" ]]; then + echo -e "${red}OpenRC不支持查看日志${plain}" + echo -e "${yellow}请使用文本处理工具直接查阅日志（默认保存位置为/etc/XrayR/）${plain}" + else + journalctl -u XrayR.service -e --no-pager -f + fi if [[ $# == 0 ]]; then before_show_menu fi } install_bbr() { - bash <(curl -L -s https://raw.githubusercontent.com/chiakge/Linux-NetSpeed/master/tcp.sh) + if [[ x"${release}" == x"alpine" ]]; then + echo -e "${red}由于Alpine采用musl运行库，不支持使用该脚本安装bbr！${plain}\n" + echo -e "${yellow}请使用以下命令设置系统内置bbr${plain}" + echo -e "${yellow}sysctl -w net.ipv4.tcp_congestion_control=bbr${plain}\n" + exit 1 + else + bash <(curl -L -s https://raw.githubusercontent.com/chiakge/Linux-NetSpeed/master/tcp.sh) + fi #if [[ $? == 0 ]]; then # echo "" # echo -e "${green}安装 bbr 成功，请重启服务器${plain}" @@ -283,23 +337,43 @@ update_shell() { # 0: running, 1: not running, 2: not installed check_status() { - if [[ ! -f /etc/systemd/system/XrayR.service ]]; then - return 2 - fi - temp=$(systemctl status XrayR | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1) - if [[ x"${temp}" == x"running" ]]; then - return 0 + if [[ x"${release}" == x"alpine" ]]; then + if [[ ! -f /etc/init.d/XrayR ]]; then + return 2 + fi + temp=$(service XrayR status | grep status | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1) + if [[ x"${temp}" == x"started" ]]; then + return 0 + else + return 1 + fi else - return 1 + if [[ ! -f /etc/systemd/system/XrayR.service ]]; then + return 2 + fi + temp=$(systemctl status XrayR | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1) + if [[ x"${temp}" == x"running" ]]; then + return 0 + else + return 1 + fi fi } check_enabled() { - temp=$(systemctl is-enabled XrayR) - if [[ x"${temp}" == x"enabled" ]]; then - return 0 + if [[ x"${release}" == x"alpine" ]]; then + if [[ ! -f /etc/runlevels/default/XrayR ]]; then + return 1 + else + return 0 + fi else - return 1; + temp=$(systemctl is-enabled XrayR) + if [[ x"${temp}" == x"enabled" ]]; then + return 0 + else + return 1; + fi fi } diff --git a/install.sh b/install.sh index 396e936..a814cee 100644 --- a/install.sh +++ b/install.sh @@ -13,6 +13,8 @@ cur_dir=$(pwd) # check os if [[ -f /etc/redhat-release ]]; then release="centos" +elif [[ -f /etc/alpine-release ]]; then + release="alpine" elif cat /etc/issue | grep -Eqi "debian"; then release="debian" elif cat /etc/issue | grep -Eqi "ubuntu"; then @@ -25,6 +27,10 @@ elif cat /proc/version | grep -Eqi "ubuntu"; then release="ubuntu" elif cat /proc/version | grep -Eqi "centos|red hat|redhat"; then release="centos" +elif cat /proc/version | grep -Eqi "alpine"; then + release="alpine" +elif cat /etc/issue | grep -Eqi "alpine"; then + release="alpine" else echo -e "${red}未检测到系统版本，请联系脚本作者！${plain}\n" && exit 1 fi @@ -65,18 +71,25 @@ if [[ x"${release}" == x"centos" ]]; then fi elif [[ x"${release}" == x"ubuntu" ]]; then if [[ ${os_version} -lt 16 ]]; then - echo -e "${red}请使用 Ubuntu 16 或更高版本的系统！${plain}\n" && exit 1 + echo -e "${red}请使用 Ubuntu 16.04 或更高版本的系统！${plain}\n" && exit 1 fi elif [[ x"${release}" == x"debian" ]]; then if [[ ${os_version} -lt 8 ]]; then echo -e "${red}请使用 Debian 8 或更高版本的系统！${plain}\n" && exit 1 fi +elif [[ x"${release}" == x"alpine" ]]; then + if [[ ${os_version} -lt 3.8 ]]; then + echo -e "${red}请使用 Alpine 3.8 或更高版本的系统！${plain}\n" && exit 1 + fi fi install_base() { if [[ x"${release}" == x"centos" ]]; then yum install epel-release -y yum install wget curl unzip tar crontabs socat -y + elif [[ x"${release}" == x"alpine" ]]; then + apk update + apk add wget curl unzip tar socat else apt update -y apt install wget curl unzip tar cron socat -y @@ -85,14 +98,26 @@ install_base() { # 0: running, 1: not running, 2: not installed check_status() { - if [[ ! -f /etc/systemd/system/XrayR.service ]]; then - return 2 - fi - temp=$(systemctl status XrayR | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1) - if [[ x"${temp}" == x"running" ]]; then - return 0 + if [[ x"${release}" == x"alpine" ]]; then + if [[ ! -f /etc/init.d/XrayR ]]; then + return 2 + fi + temp=$(service XrayR status | grep status | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1) + if [[ x"${temp}" == x"started" ]]; then + return 0 + else + return 1 + fi else - return 1 + if [[ ! -f /etc/systemd/system/XrayR.service ]]; then + return 2 + fi + temp=$(systemctl status XrayR | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1) + if [[ x"${temp}" == x"running" ]]; then + return 0 + else + return 1 + fi fi } @@ -139,13 +164,26 @@ install_XrayR() { rm XrayR-linux.zip -f chmod +x XrayR mkdir /etc/XrayR/ -p - rm /etc/systemd/system/XrayR.service -f - file="https://github.com/XrayR-project/XrayR-release/raw/master/XrayR.service" - wget -q -N --no-check-certificate -O /etc/systemd/system/XrayR.service ${file} + if [[ x"${release}" == x"alpine" ]]; then + #handle openrc + service XrayR stop + rc-update delete XrayR + file="https://github.com/XrayR-project/XrayR-release/raw/master/XrayR" + wget -q -N --no-check-certificate -O /etc/init.d/XrayR ${file} + chmod +x /etc/init.d/XrayR + rc-update add XrayR + else + #handle systemd + rm /etc/systemd/system/XrayR.service -f + file="https://github.com/XrayR-project/XrayR-release/raw/master/XrayR.service" + wget -q -N --no-check-certificate -O /etc/systemd/system/XrayR.service ${file} + systemctl daemon-reload + systemctl stop XrayR + systemctl enable XrayR + fi + #cp -f XrayR.service /etc/systemd/system/ - systemctl daemon-reload - systemctl stop XrayR - systemctl enable XrayR + echo -e "${green}XrayR ${last_version}${plain} 安装完成，已设置开机自启" cp geoip.dat /etc/XrayR/ cp geosite.dat /etc/XrayR/