client_macros.cfg

#
# This is an example (but working) macro to park toolhead out of the way of print
# You can also use your existing
#
[gcode_macro _PARK]
description: Park toolhead safely away from print
gcode:
    {% set Z_HOP = params.Z_HOP|default(5)|float %}
    {% set x_park = printer.toolhead.axis_minimum.x|float + 5.0 %}
    {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
    {% set max_z = printer.toolhead.axis_maximum.z|float %}
    {% set act_z = printer.toolhead.position.z|float %}

    {% if act_z < (max_z - Z_HOP) %}
        {% set z_safe = Z_HOP %}
    {% else %}
        {% set z_safe = max_z - act_z %}
    {% endif %}

    G91
    G1 Z{z_safe} F900
    G90
    G0 X{x_park} Y{y_park} F6000

#
# This is an example (but working) CANCEL_PRINT macro
# You can also use your existing, but it should follow this pattern
#
[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
description: Cancel print
gcode:
    END_PRINT ERCF_UNLOAD=0
    SDCARD_RESET_FILE
    CLEAR_PAUSE
    BASE_CANCEL_PRINT

#
# This is an example (but working) PAUSE macro
# You can also use your existing, but it should follow this pattern
#
[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
description: Pause the print and park
gcode:
  {% if printer.pause_resume.is_paused %}
    RESPOND MSG="Print is already paused"
  {% else %}
    G92 E0
    G1 E-1.0 F1500.0	; Retract a little to reduce ooze
    G90
    SAVE_GCODE_STATE NAME=PAUSE_state
    BASE_PAUSE
    _PARK Z_HOP=5
  {% endif %}

#
# This is an example (but working) RESUME macro
# You can also use your existing, but it should follow this pattern
#
[gcode_macro RESUME]
rename_existing: BASE_RESUME
description: Resume the print
gcode:
  {% if not printer.pause_resume.is_paused %}
    RESPOND MSG="Print is not paused. Resume ignored"
  {% else %}
    #
    # Good place to add other things like purging or nozzle cleaning
    #
    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1 MOVE_SPEED=100
    G90
    BASE_RESUME
  {% endif %}