% DLT-CONTROL(1)
dlt-control - Send control messages to DLT Daemon
dlt-control [-v] [-h] [-S] [-R] [-y] [-b baudrate] [-e ecuid] [-a id] [-c id] [-s id] [-m message] [-x message] [-t milliseconds] [-l level] [-r tracestatus] [-d loglevel] [-f tracestatus] [-i enable] [-o] [-g] [-j] [-u] [-p port] hostname/serial_device_name
Send control messages to DLT Daemon. This is useful when there is no client (e.g. DLT Viewer) available. It supports several control messages including:
- Setting log level/trace level
- Setting default log level/default trace level
- Enable timing packets
- Store configuration
- Reset to factory default
- Get logging information
Note Use -u option instead of hostname/serial_device_name if Unix Socket is used. See example for detail.
-v
: Verbose mode
-h
: Usage
-S
: Send message with serial header (Default: Without serial header)
-R
: Enable resync serial header
-y
: Serial device mode
-b
: Serial device baudrate (Default: 115200)
-e
: Set ECU ID (Default: RECV)
-a
: Control message application id
-c
: Control message context id
-s
: Control message injection service id
-m
: Control message injection in ASCII
-x
: Control message injection in Hex e.g. 'ad 01 24 ef'
-t
: Timeout to terminate application (Default:1000)
-l
Set the log level (0=off - 6=verbose, default= -1)
supported options:
-l level -a apid -c ctid
-l level -a abc* (set level for all ctxts of apps name starts with abc)
-l level -a apid (set level for all ctxts of this app)
-l level -c xyz* (set level for all ctxts whose name starts with xyz)
-l level -c ctid (set level for the particular ctxt)
-l level (set level for all the registered contexts)
-r
: Set the trace status (0=off - 1=on, default=255) supported options: -r tracestatus -a apid -c ctid -r tracestatus -a abc* (set status for all ctxts of apps name starts with abc) -r tracestatus -a apid (set status for all ctxts of this app) -r tracestatus -c xyz* (set status for all ctxts whose name starts with xyz) -r tracestatus -c ctid (set status for the particular ctxt) -r tracestatus (set status for all the registered contexts)
-d
: Set the default log level (0=off - 5=verbose)
-f
: Set the default trace status (0=off - 1=on)
-i
: Enable timing packets (0=off - 1=on)
-o
: Store configuration
-g
: Reset to factory default
-j
: Get log info
-u : unix port
-p
: Port for TCP communication (Default: 3490).
Change log level of application "APP1" to DEBUG with unix port dlt-control -a APP1 -l 5 -u
Change log level of application "APP1" and context "CON1" to ERROR dlt-control -a APP1 -c CON1 -l 2 localhost
Get logging information of current running applications with unix port (IPC: Unix Socket) dlt-control -j -u
Get logging information of current running applications (IPC:FIFO) dlt-control -j localhost
Non zero is returned in case of failure.
Saya Sugiura (ssugiura (at) jp.adit-jv (dot) com)
Copyright (C) 2019 Advanced Driver Information Technology, Bosch and DENSO. License MPL-2.0: Mozilla Public License version 2.0 http://mozilla.org/MPL/2.0/.
See Github issue: https://github.com/GENIVI/dlt-daemon/issues
dlt-daemon(1)