ltp_tests.cfg

# KEEP THIS FILE SORTED
# in case of trouble, use ./contrib/conf_lint.py < FILENAME

# Common problems:
# - no FUNC() - feature (typically, a syscall) not implemented
# - utimensat - tries to call utimensat() as part of setup, fails
# - tmpfs - tries to mount tmpfs
# - copy child - tries to copy a child binary (X_child) to "."
# - kernel config - tries to read kernel .config

[DEFAULT]
timeout = 30

# 3 does not pass, because LTP is bugged (they meant to test invalid buffer, but failed to).
# 6 does not pass because we first verify the state of socket, only then trigger a type specific
# callback, which results in different errno than on Linux.
[accept01]
must-pass =
    1
    2
    4
    5

# no setsockopt(SOL_IP)
[accept02]
skip = yes

# utimensat
[access01_run]
skip = yes

# tmpfs
[access04]
skip = yes

# tmpfs
[acct01]
skip = yes

# kernel config
[acct02]
skip = yes

# no add_key()
[add_key*]
skip = yes

# no adjtimex()
[adjtimex*]
skip = yes

# getgrgid(user GID) fails with ENOENT
[bind02]
skip = yes

# subtest 2: UNIX sockets have no dentries currently (are not visible on fs)
[bind04]
must-pass =
    1

# UNIX datagram socks are not supported
[bind05]
skip = yes

# kernel config
[bind06]
skip = yes

# no BPF
[bpf_map*]
skip = yes

# no BPF
[bpf_prog*]
skip = yes

# no cacheflush()
[cacheflush*]
skip = yes

# no capget()
[capget*]
skip = yes

# no capset()
[capset*]
skip = yes

# tries to mount a filesystem
[chdir01]
skip = yes

# symlink test
[chdir01A]
skip = yes

# symlink test
[chmod01A]
skip = yes

# getgrnam("bin") fails with ENOENT
[chmod05]
skip = yes

# tmpfs
[chmod06]
skip = yes

# getgrnam("users") fails with ENOENT
[chmod07]
skip = yes

# 16-bit unsupported
[chown*_16]
skip = yes

# chown() does not clear setuid/setgid bits set on executable files
[chown02]
skip = yes

# no seteuid()
[chown03]
skip = yes

# requires using a device
[chown04]
skip = yes

# no seteuid()
[chroot01]
skip = yes

[chroot03_run]
must-pass =
    1
    2
    3
    4

# hangs, no setuid(), rmdir() failing
[chroot04]
skip = yes

# no adjtime()
[clock_adjtime*]
skip = yes

# kernel config
[clock_gettime03]
skip = yes

# test 10: EOPNOTSUPP expected on CLOCK_THREAD_CPUTIME_ID
[clock_nanosleep01]
timeout = 40
must-pass =
    1
    2
    3
    4
    5
    8
    9
    11
    12
    13
    14

# kernel config
[clock_nanosleep03]
skip = yes

# no clock_settime()
[clock_settime*]
skip = yes

# Invokes clone() with CLONE_VM but without either of CLONE_THREAD or CLONE_VFORK, i.e., a process
# sharing its parents address space. Gramine doesn't support this exotic model. Bug exposed by
# https://github.com/oscarlab/Gramine/pull/1034.
[clone02]
skip = yes

[clone03]
timeout = 40

# CLONE_VFORK implemented only as an alias to fork()
[clone05]
skip = yes

[clone06]
timeout = 40

# no CLONE_PARENT
[clone08]
skip = yes

# no CLONE_NEWNET
[clone09]
skip = yes

# no clone3()
[clone3*]
skip = yes

# opens /proc/sys/kernel/tainted
[connect02]
skip = yes

# no copy_file_range()
[copy_file_range*]
skip = yes

# no seteuid()
[creat04]
skip = yes

# tmpfs
[creat06]
skip = yes

# copy child
[creat07]
skip = yes

# getgrnam("nobody") and getgrnam("nogroup") fails with ENOENT
[creat08]
skip = yes

# no delete_module()
[delete_module*]
skip = yes

[dirtyc0w]
skip = yes

# complex test, not all of its checking is implemented in Gramine
[epoll01]
timeout = 1200

# segfault: uses sigprocmask and sends signals, broken in Gramine
[epoll_pwait01]
must-pass =
    1

[epoll_pwait02]
must-pass =
   1

[epoll_pwait03]
must-pass =
   2
   3
   4
   5
   6
   7

# test requires libaio
[eventfd01]
skip = yes

# eventfd not allowed in manifest
[eventfd2_*]
skip = yes

# error while loading libc.so.6
[execle01]
skip = yes

# error while loading libc.so.6
[execve01]
skip = yes

# copy child
[execve02]
skip = yes

# copy child
[execve04]
skip = yes

# copy child
[execve05]
skip = yes

# execveat not implemented
[execveat01]
skip = yes

# execveat not implemented
[execveat02]
skip = yes

# execveat not implemented
[execveat03]
skip = yes

[faccessat01]
timeout = 80

# some modes not implemented
[fallocate01]
must-pass =
    1
    2

# some modes not implemented
[fallocate02]
skip = yes

# some modes not implemented
[fallocate03]
must-pass =
    1
    2
    3
    4

# requires using a device
[fallocate04]
skip = yes

# requires using a device
[fallocate05]
skip = yes

# requires using a device
[fallocate06]
skip = yes

# no fanotify()
[fanotify*]
skip = yes

[fchdir02]
timeout = 40

# no seteuid()
[fchdir03]
skip = yes

# getgrnam("users") / "daemon" fails with ENOENT
[fchmod02]
skip = yes

# no seteuid()
[fchmod03]
skip = yes

# no seteuid()
[fchmod04]
skip = yes

# no seteuid(), setegid()
[fchmod05]
skip = yes

# tmpfs
[fchmod06]
skip = yes

[fchmodat01]
timeout = 40

[fchown*_16]
skip = yes

[fchown02*]
skip = yes

[fchown03*]
skip = yes

[fchown04*]
skip = yes

[fchownat01_run]
must-pass =
    1
    2
    3
    5

[fchownat02_run]
skip = yes

[fcntl02_64]
timeout = 40

# no LINUX_LOCK_FILE_REGION support (F_RGETLK/F_RSETLK)
[fcntl06]
skip = yes

[fcntl06_64]
skip = yes

# exec on self fails
[fcntl07]
skip = yes

# exec on self fails
[fcntl07_64]
skip = yes

# no statfs()
[fcntl14]
timeout = 210

[fcntl14_64]
timeout = 210

# no locks
[fcntl17]
skip = yes

[fcntl17_64]
skip = yes

# no locks
[fcntl18]
must-pass =
    1
    2
    4

[fcntl18_64]
must-pass =
    1
    2
    4

# no statfs()
[fcntl23]
skip = yes

[fcntl23_64]
skip = yes

# no statfs()
[fcntl24]
skip = yes

[fcntl24_64]
skip = yes

# no statfs()
[fcntl25]
skip = yes

[fcntl25_64]
skip = yes

# no statfs()
[fcntl26]
skip = yes

[fcntl26_64]
skip = yes

# no F_GETPIPE_SZ
[fcntl30]
skip = yes

[fcntl30_64]
skip = yes

# no F_GETOWN
[fcntl31]
skip = yes

[fcntl31_64]
skip = yes

# no statfs()
[fcntl32]
skip = yes

[fcntl32_64]
skip = yes

# opens /proc/sys/fs/lease-break-time
[fcntl33]
skip = yes

[fcntl33_64]
skip = yes

# kernel 3.15.0 or newer
[fcntl34]
skip = yes

[fcntl34_64]
skip = yes

# opens /proc/sys/fs/pipe-max-size
[fcntl35]
skip = yes

[fcntl35_64]
skip = yes

# kernel 3.15 or newer
[fcntl36]
skip = yes

[fcntl36_64]
skip = yes

# no F_GETPIPE_SZ
[fcntl37]
skip = yes

[fcntl37_64]
skip = yes

# no F_SETSIG
[fcntl38]
skip = yes

[fcntl38_64]
skip = yes

# 2. fdatasync() on /dev/null passes instead of failing with EINVAL
[fdatasync02]
must-pass =
    1

# tries to mount a device
[fdatasync03]
skip = yes

# no fgetxattr(), tries to use mounts and utimensat
[fgetxattr*]
skip = yes

# no flistxattr()
[flistxattr*]
skip = yes

# no flock()
[flock*]
skip = yes

# %fs test, i386 only
[fork05]
skip = yes

[fork06]
timeout = 90

# sometimes fails with "x/100 children didn't read correctly from an inheritted fd"
[fork07]
skip = yes

# expect fd to share file offset in parent and child (unsupported)
[fork10]
skip = yes

# tries to overflow address space
[fork14]
skip = yes

# no fremovexattr()
[fremovexattr*]
skip = yes

# mounts a filesystem
[fsconfig*]
skip = yes

# no fsetxattr()
[fsetxattr*]
skip = yes

# mounts a filesystem
[fsmount*]
skip = yes

# mounts a filesystem
[fsopen*]
skip = yes

# mounts a filesystem
[fspick*]
skip = yes

# tries to mount a filesystem
[fsync01]
skip = yes

# can write up to 65,536 8K blocks; the test itself assumes that it takes no more than 120 seconds
[fsync02]
timeout = 120

# 1. fsync() on a pipe returns EROFS, not EINVAL
# 2. fsync() on a socket returns EROFS, not EINVAL
# 5. fsync() on a fifo returns EROFS, not EINVAL
[fsync03]
timeout = 40

# tries to mount a filesystem
[fsync04]
skip = yes

# no statfs()
[ftruncate04]
skip = yes

[ftruncate04_64]
skip = yes

# opens /proc/PID/stat
[futex_cmp_requeue01]
skip = yes

# always fails to open /proc/PID/stat, but the whole test fails only sometimes
[futex_wait02]
skip = yes

# flaky, see https://github.com/oscarlab/Gramine/pull/180#issuecomment-368970338.
[futex_wait03]
skip = yes

# opens /proc/2/task
[futex_wake02]
skip = yes

# no shm_open()
[futex_wake03]
skip = yes

# opens /sys/kernel/mm/hugepages
[futex_wake04]
skip = yes

# no futimesat()
[futimesat*]
skip = yes

# no get_mempolicy()
[get_mempolicy*]
skip = yes

# opens /proc/sys/kernel/pid_max
[get_robust_list01]
must-pass = 
    1
    2
    3
    4

[getcwd03_run]
skip = yes

# utimensat
[getcwd04]
must-pass =
    2

# tries to open /etc/hosts
[getdtablesize01]
must-pass =
    1

# no 16-bit getegid()
[getegid*_16]
skip = yes

# no 16-bit geteuid()
[geteuid*_16]
skip = yes

# no 16-bit getgid()
[getgid*_16]
skip = yes

# no 16-bit getgroups()
[getgroups*_16]
skip = yes

# tries to execute shell using system()
[gethostid01]
skip = yes

# only ITIMER_REAL is supported
[getitimer01]
must-pass =
    1
    3
    5

# only ITIMER_REAL is supported
[getitimer03]
skip = yes

# 3, 4. getpgid(getppid()) -> getpgid(1) fails with ESRCH
# 5, 6. getpgid(getpgid(0)) -> getpgid(1) fails with ESRCH
# 7. getpgid(1) fails with ESRCH
[getpgid01]
must-pass =
    1
    2

# opens /proc/sys/kernel/pid_max
[getpgid02]
skip = yes

[getpid02]
must-pass =
    1

# getpriority() has a dummy implementation that always returns the same value
[getpriority02]
skip = yes

# no getresgid()
[getresgid*]
skip = yes

# no getresuid()
[getresuid*]
skip = yes

# no getrusage()
[getrusage*]
skip = yes

# session management not supported
[getsid01]
skip = yes

# opens /proc/sys/kernel/pid_max
[getsid02]
skip = yes

# Requires support for getsockopt(level=SOL_SOCKET, optname=SO_PEERCRED, ...)
[getsockopt02]
skip = yes

# no 16-bit getuid()
[getuid*_16]
skip = yes

# no getxattr()
[getxattr*]
skip = yes

# no inotify()
[inotify*]
skip = yes

# no io_cancel()
[io_cancel*]
skip = yes

# no io_destroy()
[io_destroy*]
skip = yes

# no io_getevents()
[io_getevents*]
skip = yes

# no io_pgetevents()
[io_pgetevents*]
skip = yes

# no io_setup()
[io_setup*]
skip = yes

# no io_submit()
[io_submit*]
skip = yes

# no io_uring()
[io_uring*]
skip = yes

# runs test_ioctl, a shell script
[ioctl01_02]
skip = yes

# opens /dev/net/tun
[ioctl03]
skip = yes

# mounts a device
[ioctl04]
skip = yes

# mounts a device
[ioctl05]
skip = yes

# mounts a device
[ioctl06]
skip = yes

# no RNDGETENTCNT on /dev/urandom
[ioctl07]
skip = yes

# kernel 4.5 or newer
[ioctl08]
skip = yes

# looks for "parted" binary
[ioctl09]
skip = yes

# mounts a filesystem
[ioctl_loop*]
skip = yes

# no namespaces (/proc/self/ns, requires kernel 4.9+)
[ioctl_ns*]
skip = yes

# tries to mount a SCSI device
[ioctl_sg*]
skip = yes

# no ioperm()
[ioperm*]
skip = yes

# no iopl()
[iopl*]
skip = yes

# no ioprio_get()
[ioprio_get*]
skip = yes

# no ioprio_set()
[ioprio_set*]
skip = yes

# no kcmp()
[kcmp*]
skip = yes

# no keyctl()
[keyctl*]
skip = yes

# tries to send signal to pid 1
[kill02]
skip = yes

# no shmget()
[kill05]
skip = yes

# no shmget()
[kill07]
skip = yes

# process groups unsupported
[kill10]
skip = yes

# no lchown()
[lchown*]
skip = yes

# no clock_gettime(CLOCK_REALTIME), adjtimex()
[leapsec01]
skip = yes

# no lgetxattr()
[lgetxattr*]
skip = yes

[link01]
skip = yes

[link02]
skip = yes

[link03]
skip = yes

[link04]
skip = yes

[link05]
skip = yes

[link06]
skip = yes

[link07]
skip = yes

[link08]
skip = yes

# no linkat()
[linkat*]
skip = yes

[listen01]
must-pass =
    1
    2

# no listxattr()
[listxattr*]
skip = yes

# no llistxattr()
[llistxattr*]
skip = yes

# tries to set RLIMIT_FSIZE and write past file size limit
[llseek01]
must-pass =
    1

# no lremovexattr()
[lremovexattr*]
skip = yes

[lseek11]
skip = yes

[lstat01A]
skip = yes

[lstat01A_64]
skip = yes

[lstat01_run]
skip = yes

[lstat01_run_64]
skip = yes

[lstat02]
skip = yes

[lstat02_64]
skip = yes

# Requires root and `mount` syscall
[madvise01]
skip = yes

# Requires root and `mount` syscall
[madvise02]
skip = yes

# Requires /proc/sys/vm/drop_caches
[madvise06]
skip = yes

# Requires MADV_HWPOISON flag support
[madvise07]
skip = yes

# Requires prctl(PR_GET_DUMPABLE)
[madvise08]
skip = yes

# Requires cgroup support
[madvise09]
skip = yes

# Requires MADV_WIPEONFORK flag support
[madvise10]
skip = yes

# tests require libnuma
[mbind*]
skip = yes

[membarrier01]
skip = yes

# no memfd_create()
[memfd_create*]
skip = yes

# no migrate_pages(), requires libnuma
[migrate_pages*]
skip = yes

# mincore() has dummy implementation, only mincore01 passes
[mincore02]
skip = yes

[mincore03]
skip = yes

[mincore04]
skip = yes

[mkdir02]
skip = yes

[mkdir03]
skip = yes

[mkdir04]
skip = yes

[mkdir05A]
skip = yes

[mkdirat02]
skip = yes

# first two tests use supported regular files and FIFOs, other tests use unsupported char/block
# devices
[mknod01]
must-pass =
    1
    2

# requires root and uses unsupported S_ISGID
[mknod02]
skip = yes

# requires root and uses unsupported S_ISGID
[mknod03]
skip = yes

# requires root and uses unsupported S_ISGID
[mknod04]
skip = yes

# requires root and uses unsupported S_ISGID
[mknod05]
skip = yes

# requires root and wants to mount FS, also tests unsupported char, socket, and block devices
[mknod07]
skip = yes

# requires root and uses unsupported S_ISGID
[mknod08]
skip = yes

# requires root and wants to mount FS
[mknodat02]
skip = yes

[mlock02]
skip = yes

[mlock201]
skip = yes

[mlock202]
must-pass =
    1

[mlock203]
skip = yes

[mlockall02]
skip = yes

[mlockall03]
skip = yes

[mmap12]
skip = yes

[mmap14]
skip = yes

[mmap16]
skip = yes

# should fail when growing the stack over a guard page
[mmap18]
must-pass =
    3
    4

[modify_ldt01]
skip = yes

[modify_ldt02]
skip = yes

[modify_ldt03]
skip = yes

[mount01]
skip = yes

[mount02]
skip = yes

[mount03]
skip = yes

[mount04]
skip = yes

[mount05]
skip = yes

[mount06]
skip = yes

# no move_mount()
[move_mount*]
skip = yes

# no move_pages()
[move_pages*]
skip = yes

[mprotect01]
must-pass =
    2

[mq_notify01]
skip = yes

[mq_notify02]
skip = yes

[mq_open01]
skip = yes

[mq_timedreceive01]
skip = yes

[mq_timedsend01]
skip = yes

[mq_unlink01]
skip = yes

[mremap01]
skip = yes

[mremap02]
skip = yes

[mremap03]
skip = yes

[mremap04]
skip = yes

[mremap05]
skip = yes

[msgctl*]
skip = yes

[msgget*]
skip = yes

[msgrcv*]
skip = yes

[msgsnd*]
skip = yes

[msgstress01]
skip = yes

[msgstress02]
skip = yes

[msgstress03]
skip = yes

[msgstress04]
skip = yes

# uses MS_INVALIDATE flag which is not supported in Gramine
[msync02]
skip = yes

# 2 sub-tests fail with MS_INVALIDATE and MS_SYNC unsupported flag
[msync03]
must-pass =
    2
    3
    4
    5

# uses MS_SYNC flag which is not supported in Gramine
[msync04]
skip = yes

[munlock02]
skip = yes

[nftw01]
skip = yes

[nftw6401]
skip = yes

[nice01]
skip = yes

[nice02]
skip = yes

[nice03]
skip = yes

[nice04]
skip = yes

# Requires symlinks support
[open01A]
skip = yes

# Requires seteuid() support
[open05]
skip = yes

# Requires support of ENXIO (fail to open for write if other side didn't open) in mknod()
[open06]
skip = yes

# Requires symlink() support
[open07_run]
skip = yes

# Subtest 5 requires proper file permissions checks (file with 0600 is opened using another user and
# failure is expected).
[open08]
must-pass =
    1
    2
    3
    4
    6

# Uses getpwnam("nobody") and requires "nobody" user to exist.
[open10]
skip = yes

# Uses /proc/mounts
[open12]
skip = yes

[open13_run]
skip = yes

# Requires O_TMPFILE support
[open14]
skip = yes

# no open_tree()
[open_tree*]
skip = yes

# Requires symlink() support
[openat02]
skip = yes

# Requires O_TMPFILE support
[openat03]
skip = yes

# no openat2()
[openat2*]
skip = yes

# uses futexes on memory shared between processes
[pause01]
skip = yes

# not supported in Gramine
[pause02]
skip = yes

# not supported in Gramine
[pause03]
skip = yes

[perf_event_open01]
skip = yes

[perf_event_open02]
skip = yes

[personality01]
skip = yes

[personality02]
skip = yes

# no pidfd_open()
[pidfd_open*]
skip = yes

# no pidfd_send_signal()
[pidfd_send_signal*]
skip = yes

[pipe02]
skip = yes

[pipe07]
skip = yes

[pipe11]
must-pass =
    1

# no F_GETPIPE_SZ
[pipe12]
skip = yes

# closes last writer and waits for readers to wake up, times out
[pipe13]
skip = yes

# fails to set O_NONBLOCK by using pipe2(fds, O_NONBLOCK)
[pipe2_04]
skip = yes

[pivot_root01]
skip = yes

# no pkey_alloc()
[pkey*]
skip = yes

[posix_fadvise01]
skip = yes

[posix_fadvise01_64]
skip = yes

[posix_fadvise02]
skip = yes

[posix_fadvise02_64]
skip = yes

[posix_fadvise03]
skip = yes

[posix_fadvise03_64]
skip = yes

[posix_fadvise04]
skip = yes

[posix_fadvise04_64]
skip = yes

[ppoll01]
must-pass =
    1
    2
    3
    4
    5
    6
    7
    9
    10
    11
    12
    13
    14
    15
    16
    17
    19
    20

[prctl01]
skip = yes

# no capget()
[prctl02]
skip = yes

[prctl03]
skip = yes

# no PR_GET/SET_SECCOMP
[prctl04]
skip = yes

# no PR_SET_NAME
[prctl05]
skip = yes

# mounts filesystem
[prctl06]
skip = yes

# no PR_CAMP_AMBIENT
[prctl07]
skip = yes

# no PR_TIMER_SETSLACEK
[prctl08]
skip = yes

# no PR_TIMER_SETSLACK
[prctl09]
skip = yes

[pread01]
timeout = 40

[pread01_64]
timeout = 40

[pread02]
timeout = 40

# Fails intermittently in CI.
[preadv01]
skip = yes

[preadv01_64]
skip = yes

[preadv02]
skip = yes

[preadv02_64]
skip = yes

[preadv03]
skip = yes

[preadv03_64]
skip = yes

[preadv201]
skip = yes

[preadv201_64]
skip = yes

[preadv202]
skip = yes

[preadv202_64]
skip = yes

# mounts filesystem
[preadv203]
skip = yes

[preadv203_64]
skip = yes

[process_vm_readv01]
skip = yes

[process_vm_readv02]
skip = yes

[process_vm_readv03]
skip = yes

[process_vm_writev01]
skip = yes

[process_vm_writev02]
skip = yes

[profil01]
skip = yes

[prot_hsymlinks]
skip = yes

# no ptrace()
[ptrace*]
skip = yes

[pwrite01_64]
timeout = 40

[pwrite04]
must-pass =
    2

[pwrite04_64]
timeout = 40
must-pass =
    2

[pwritev01]
skip = yes

[pwritev01_64]
skip = yes

[pwritev02]
skip = yes

[pwritev02_64]
skip = yes

[pwritev03]
skip = yes

[pwritev03_64]
skip = yes

[pwritev201]
skip = yes

[pwritev201_64]
skip = yes

[pwritev202]
skip = yes

[pwritev202_64]
skip = yes

# one sub-test fails MS_SYNC unsupported msync flag
[qmm01]
must-pass =
    1
    2
    4

# no quotactl()
[quotactl*]
skip = yes

[read03_run]
skip = yes

[readahead01]
skip = yes

[readahead02]
skip = yes

[readdir01]
timeout = 40

[readdir21]
skip = yes

[readlink01A]
skip = yes

[readlink01_run]
skip = yes

[readlink03]
skip = yes

[readlinkat01_run]
must-pass =
    3
    4

[realpath01]
skip = yes

[reboot01]
skip = yes

[reboot02]
skip = yes

# Subtests 4 and 5 require handling MSG_OOB and MSG_ERRQUEUE flags in recv.
[recv01]
must-pass =
    1
    2
    3

# subtest 3: Linux ignores invalid address in recvfrom for stream sockets.
# subtest 6: Requires MSG_OOB support.
# subtest 7: Requires MSG_ERRQUEUE support (LTP outputs: "skip MSG_ERRQUEUE test, it's supported
#            from 3.17").
[recvfrom01]
must-pass =
    1
    2
    4
    5

# subtest 3: Linux ignores invalid address in recvmsg for stream sockets.
# subtest 4: Requires MSG_ERRQUEUE support (LTP outputs: "skip MSG_ERRQUEUE test, it's supported
#            from 3.17").
# subtest 8: Ancillary data not supported.
# subtest 9: Requires MSG_OOB support.
# subtest 10: Requires MSG_ERRQUEUE support (LTP outputs: "skip MSG_ERRQUEUE test, it's supported
#             from 3.17").
# subtest 11: Ancillary data not supported.
# subtest 12: Ancillary data not supported.
[recvmsg01]
must-pass =
    1
    2
    5
    6
    7

# MSG_PEEK with UDP sockets not supported currently.
[recvmsg02]
skip = yes

# Requires AF_RDS support in socket().
[recvmsg03]
skip = yes

[remap_file_pages01]
skip = yes

[remap_file_pages02]
skip = yes

[removexattr01]
skip = yes

[removexattr02]
skip = yes

[rename01A]
skip = yes

[rename01_run]
skip = yes

[rename03_run]
skip = yes

[rename04]
skip = yes

[rename05]
skip = yes

[rename06]
skip = yes

[rename07]
skip = yes

[rename09]
skip = yes

[rename11]
skip = yes

[rename12]
skip = yes

[rename13_run]
skip = yes

[renameat01]
skip = yes

[renameat201]
skip = yes

[renameat202]
skip = yes

[request_key01]
skip = yes

[request_key02]
skip = yes

[request_key03]
skip = yes

[request_key04]
skip = yes

[request_key05]
skip = yes

[rmdir02]
skip = yes

[rmdir03]
skip = yes

[rmdir03A]
skip = yes

[rt_sigqueueinfo01]
skip = yes

# Test 14 expects a restart of rt_sigtimedwait01 with updated timeout on ignored (but unblocked)
# SIGUSR2, so that it finally ETIMEDOUTs. However, restarting on unblocked (and thus pending) but
# ignored (and thus having SIG_IGN) signals is not yet implemented in Gramine.
[rt_sigtimedwait01]
must-pass =
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    15
    16
    17
    18
    19

[rt_tgsigqueueinfo01]
skip = yes

[sbrk03]
skip = yes

[sched_getaffinity01]
must-pass =
    1
    2
    3

[sched_getattr01]
skip = yes

[sched_getattr02]
skip = yes

[sched_getparam01]
skip = yes

[sched_getparam02]
skip = yes

[sched_getparam03]
skip = yes

[sched_getscheduler01]
skip = yes

[sched_getscheduler02]
skip = yes

[sched_rr_get_interval01]
skip = yes

[sched_rr_get_interval02]
skip = yes

[sched_rr_get_interval03]
skip = yes

[sched_setaffinity01]
must-pass = 
    1
    2
    3

[sched_setattr01]
skip = yes

[sched_setparam01]
skip = yes

[sched_setparam02]
skip = yes

[sched_setparam03]
skip = yes

[sched_setparam04]
skip = yes

[sched_setparam05]
skip = yes

[sched_setscheduler01]
skip = yes

[sched_setscheduler02]
skip = yes

[sched_setscheduler03]
skip = yes

[select03]
must-pass = 
   1

[select04]
timeout = 60

[semctl*]
skip = yes

[semget*]
skip = yes

[semop*]
skip = yes

[send02]
skip = yes

# UNIX datagram sockets (socketpair) not supported
[sendfile07]
skip = yes

[sendfile07_64]
skip = yes

# sendfile09 copies 1GB of data from one file to another twice, may be slow on HDD machines
[sendfile09]
timeout = 60

[sendfile09_64]
timeout = 60

# EINVAL from native sendmsg()
[sendmmsg01]
skip = yes

# messes with network interfaces, not supported in Gramine
[sendmsg01]
skip = yes

# uses sysv semaphores
[sendmsg02]
skip = yes

# opens /proc/sys/kernel/tainted
[sendmsg03]
skip = yes

# sctp protocol not supported
[sendto02]
skip = yes

# kernel config
[sendto03]
skip = yes

# no set_mempolicy()
[set_mempolicy*]
skip = yes

[set_thread_area01]
skip = yes

# Requires seteuid() support
[setdomainname03]
skip = yes

[setegid01]
skip = yes

[setegid02]
skip = yes

[setfsgid01]
skip = yes

[setfsgid01_16]
skip = yes

[setfsgid02]
skip = yes

[setfsgid02_16]
skip = yes

[setfsgid03]
skip = yes

[setfsgid03_16]
skip = yes

[setfsuid01]
skip = yes

[setfsuid01_16]
skip = yes

[setfsuid02]
skip = yes

[setfsuid02_16]
skip = yes

[setfsuid03]
skip = yes

[setfsuid03_16]
skip = yes

[setfsuid04]
skip = yes

[setfsuid04_16]
skip = yes

[setgid01_16]
skip = yes

[setgid02_16]
skip = yes

[setgid03_16]
skip = yes

[setgroups01_16]
skip = yes

[setgroups02_16]
skip = yes

[setgroups03]
must-pass =
    1

[setgroups03_16]
skip = yes

[setgroups04_16]
skip = yes

# Requires seteuid() support
[sethostname03]
skip = yes

[setitimer03]
skip = yes

[setns01]
skip = yes

[setns02]
skip = yes

[setpgid02]
must-pass = 
    1

[setpgid03]
skip = yes

[setpriority01]
skip = yes

[setpriority02]
skip = yes

# no setregid()
[setregid*]
skip = yes

# no setresgid()
[setresgid*]
skip = yes

# no setresuid()
[setresuid*]
skip = yes

# no setreuid()
[setreuid*]
skip = yes

[setrlimit01]
must-pass =
    1
    3
    4

[setrlimit02]
must-pass =
    1

[setrlimit03]
must-pass =
    2

[setrlimit06]
skip = yes

[setsid01]
skip = yes

# subtest 4: SO_OOBINLINE not supported
[setsockopt01]
must-pass =
    1
    2
    3
    5
    6
    7
    8

# raw sockets not supported
[setsockopt02]
skip = yes

# subtest 1: regression test for a CVE, runs only in 32-bit mode
[setsockopt03]
must-pass =
    2

# SO_SNDBUFFORCE not supported
[setsockopt04]
skip = yes

# kernel config
[setsockopt05]
skip = yes

# kernel config
[setsockopt06]
skip = yes

# kernel config
[setsockopt07]
skip = yes

# no clock_settime()
[settimeofday01]
skip = yes

# no capget() (checks for CAP_SYS_TIME)
[settimeofday02]
skip = yes

[setuid01]
timeout = 40

[setuid01_16]
skip = yes

[setuid03_16]
skip = yes

[setuid04]
skip = yes

[setuid04_16]
skip = yes

# no setxattr()
[setxattr*]
skip = yes

[sgetmask01]
skip = yes

[shmat01]
skip = yes

[shmat02]
skip = yes

[shmat03]
skip = yes

# no shmctl()
[shmctl*]
skip = yes

# no shmdt()
[shmdt*]
skip = yes

# no shmget()
[shmget*]
skip = yes

[sigaltstack02]
timeout = 40

[sighold02]
skip = yes

[signal01]
skip = yes

# Uses inline assembly to run tkill syscall directly, which can actually abort the whole Docker
# container by sending SIGHUP to PID 1.
[signal06]
skip = yes

[signalfd01]
skip = yes

[signalfd4_01]
skip = yes

[signalfd4_02]
skip = yes

# subtest 3: UNIX datagram sockets not supported
[socket01]
must-pass =
    1
    2
    4
    5
    6
    7
    8
    9

# no socketcall()
[socketcall*]
skip = yes

# subtest 2,7-10: all try socketpair with AF_INET and some other invalid options - but IP socketpair
#                 is invalid anyway, Gramine returns EAFNOSUPPORT, but Linux returns different error
#                 codes, depending on what else was invalid
# subtest 3: UNIX datagram sockets not supported
# subtest 4: raw sockets not supported
[socketpair01]
must-pass =
    1
    5
    6

[sockioctl01]
must-pass =
    1

# no splice()
[splice*]
skip = yes

[ssetmask01]
skip = yes

[stat04]
skip = yes

[stat04_64]
skip = yes

# no symlink()
[statfs02_run]
must-pass =
    1
    2
    3
    4
    5

# no symlink()
[statfs02_run_64]
must-pass =
    1
    2
    3
    4
    5

[statfs03]
skip = yes

[statfs03_64]
skip = yes

# no symlink()
[statvfs02_run]
must-pass =
    1
    3
    4
    5

[statx01]
skip = yes

[statx02]
skip = yes

[statx03]
skip = yes

[statx04]
skip = yes

[statx05]
skip = yes

[statx06]
skip = yes

[statx07]
skip = yes

[stime01]
skip = yes

[stime02]
skip = yes

# no swapoff()
[swapoff*]
skip = yes

# no swapon()
[swapon*]
skip = yes

[switch01]
skip = yes

# no symlink()
[symlink*]
skip = yes

# no symlinkat()
[symlinkat*]
skip = yes

[sync01]
timeout = 40

[sync03]
skip = yes

[sync_file_range01]
skip = yes

[sync_file_range02]
skip = yes

[syncfs01]
skip = yes

[syscall01]
timeout = 80

# Gramine doesn't emulate all sysconf parameters, so we disable the ones not currently emulated
[sysconf01]
must-pass =
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    12
    14
    15
    16
    17
    18
    19
    20
    21
    24
    25
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    41
    42
    44
    45
    46
    47
    48
    50
    51
    52
    53
    56

[sysctl01]
skip = yes

[sysctl03]
skip = yes

[sysctl04]
skip = yes

[sysfs01]
skip = yes

[sysfs02]
skip = yes

[sysfs03]
skip = yes

[sysfs04]
skip = yes

[sysfs05]
skip = yes

[sysfs06]
skip = yes

# tests that sysinfo_buf.uptime is meaningful, but current Gramine emulation sets uptime==0
[sysinfo03]
skip = yes

# most of them are shell scripts
[syslog*]
skip = yes

[tee01]
skip = yes

[tee02]
skip = yes

# RLIMIT_SIGPENDING not supported
[tgkill02]
skip = yes

# no timer_create()
[timer_create*]
skip = yes

# no timer_delete()
[timer_delete*]
skip = yes

[timer_getoverrun01]
skip = yes

[timer_gettime01]
skip = yes

# no timer_settime()
[timer_settime*]
skip = yes

# no timerfd
[timerfd*]
skip = yes

[times03]
skip = yes

[truncate03]
skip = yes

[truncate03_64]
skip = yes

[umount01]
skip = yes

[umount02]
skip = yes

[umount03]
skip = yes

[umount2_01]
skip = yes

[umount2_02]
skip = yes

[umount2_03]
skip = yes

# Other subtests require personality() syscall support.
[uname04]
must-pass =
    1

[unlink01]
skip = yes

[unlink05_run]
must-pass = 
    1

[unlink08_run]
skip = yes

[unshare01]
skip = yes

[unshare02]
skip = yes

[userfaultfd01]
skip = yes

[ustat01]
skip = yes

[ustat02]
skip = yes

[utime01]
skip = yes

[utime01A]
skip = yes

[utime02]
skip = yes

[utime03]
skip = yes

[utime04]
skip = yes

[utime05]
skip = yes

[utime06]
skip = yes

[utimensat01]
skip = yes

[utimes01]
skip = yes

# requires getresuid(), currently not implemented in Gramine
[vfork01]
skip = yes

[vhangup01]
skip = yes

[vhangup02]
skip = yes

# no vmsplice()
[vmsplice*]
skip = yes

# tries to open '/proc/2/stat'
[wait401]
timeout = 40
must-pass =
    2
    3

# Not supported: waitid with WSTOPPED and WCONTINUED
[waitid02]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid06]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid07]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid08]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid09]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid10]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid11]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid12]
skip = yes

# uses futexes on memory shared between processes - unsupported
[waitpid13]
skip = yes

[write03]
timeout = 40

[write04]
skip = yes