k8s中部署的doris-fe 从2.0.0-alpha版本升级到2.0.1启动报错

[wgy-home]

k8s中部署的doris，原来版本是2.0.0_alpha-fe-x86_64 升级到 2.0.1，直接更新的镜像，启动报错，以下是部分日志：

2023-09-18 17:34:39,542 INFO (stateListener|95) [Env.transferToMaster():1327] finish replay in 86 msec
2023-09-18 17:34:39,542 ERROR (stateListener|95) [Env.checkCurrentNodeExist():1595] current node doris-follower-cluster1-0.doris-follower-cluster1.uk8s.svc.cluster.local:9010 is not added to the cluster, will exit. Your FE IP maybe changed, please set 'priority_networks' config in fe.conf properly.
2023-09-18 17:34:39,547 INFO (UNKNOWN doris-follower-cluster1-0.doris-follower-cluster1.uk8s.svc.cluster.local_9010_1689660754500(-1)|1) [Env.waitForReady():923] wait catalog to be ready. FE type: UNKNOWN. is ready: false, counter: 1

fe的配置文件

# cat conf/fe.conf
priority_networks = 172.20.0.0/16
#metadata_failure_recovery = true
#It can automatically maintain node information by getting the number of replicas of StatefulSet, similar to alter system add/drop back
enable_deploy_manager = k8s
#Automatically adjust the IP of the node according to the domain name (for example, after the pod is restarted, the domain name is still doris-be-cluster1-0-doris-be-cluster1.default.svc.cluster.local, but the IP may change from 172.16.0.9 to 172.16.0.10)
enable_fqdn_mode = true
LOG_DIR = ${DORIS_HOME}/log
sys_log_level = INFO
http_port = 8030
rpc_port = 9020
query_port = 9030
edit_log_port = 9010
#Doris needs to generate the log4j configuration file according to the fe.yml configuration information, which is written in the same directory as fe.yml by default, but the config we mount is readonly, so specify this configuration to write the log4j file to another location
custom_config_dir = /opt/apache-doris/
#when set to false, the backend will not be dropped and remaining in DECOMMISSION state
drop_backend_after_decommission = false

配置中开启了enable_deploy_manager = k8s 和priority_networks = 172.20.0.0/16

容器内的IP网段为 172.20.0.0/16 子网内

# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
68567: eth0@if68568: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether ba:f5:2f:25:fa:41 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 172.20.2.213/32 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::b8f5:2fff:fe25:fa41/64 scope link
       valid_lft forever preferred_lft forever

能帮我看下可能是什么原因导致的报错吗？

[yagagagaga]

Scan the QR code, I invite you to join the internal testing group for Doris-on-K8S.