From 3f7f79571770cb4a241ece52d46783fa948989e4 Mon Sep 17 00:00:00 2001 From: litiliu <38579068+litiliu@users.noreply.github.com> Date: Thu, 23 Jan 2025 19:52:55 +0800 Subject: [PATCH] [Doc][Mysql-cdc]Update doc to support mysql 8.0 (#8579) Co-authored-by: litiliu --- docs/en/connector-v2/source/MySQL-CDC.md | 86 ++++++++++++++---------- 1 file changed, 49 insertions(+), 37 deletions(-) diff --git a/docs/en/connector-v2/source/MySQL-CDC.md b/docs/en/connector-v2/source/MySQL-CDC.md index 42d3db09c91..9a95b3e566f 100644 --- a/docs/en/connector-v2/source/MySQL-CDC.md +++ b/docs/en/connector-v2/source/MySQL-CDC.md @@ -78,10 +78,9 @@ mysql> show variables where variable_name in ('log_bin', 'binlog_format', 'binlo | gtid_mode | ON | | log_bin | ON | +--------------------------+----------------+ -5 rows in set (0.00 sec) ``` -2. If inconsistent with the above results, configure your MySQL server configuration file(`$MYSQL_HOME/mysql.cnf`) with the following properties, which are described in the table below: +2. If the value of `log_bin` is not `on`, configure your MySQL server configuration file(`$MYSQL_HOME/mysql.cnf`) with the following properties, which are described in the table below: ``` # Enable binary replication log and set the prefix, expiration, and log format. @@ -95,8 +94,8 @@ binlog_format = row # mysql 5.6+ requires binlog_row_image to be set to FULL binlog_row_image = FULL -# enable gtid mode -# mysql 5.6+ requires gtid_mode to be set to ON +# optional enable gtid mode +# mysql 5.6+ requires gtid_mode to be set to ON, but not required by mysql 8.0+ gtid_mode = on enforce_gtid_consistency = on ``` @@ -119,7 +118,6 @@ mysql> show variables where variable_name in ('log_bin', 'binlog_format', 'binlo | binlog_format | ROW | | log_bin | ON | +--------------------------+----------------+ -5 rows in set (0.00 sec) ``` MySQL 5.6+: @@ -135,8 +133,22 @@ mysql> show variables where variable_name in ('log_bin', 'binlog_format', 'binlo | gtid_mode | ON | | log_bin | ON | +--------------------------+----------------+ -5 rows in set (0.00 sec) ``` +MySQL 8.0+: +```sql +show variables where variable_name in ('log_bin', 'binlog_format', 'binlog_row_image', 'gtid_mode', 'enforce_gtid_consistency') ++--------------------------+----------------+ +| Variable_name | Value | ++--------------------------+----------------+ +| binlog_format | ROW | +| binlog_row_image | FULL | +| enforce_gtid_consistency | OFF | +| gtid_mode | OFF | +| log_bin | ON | ++--------------------------+----------------+ + +``` + ### Notes @@ -169,38 +181,38 @@ When an initial consistent snapshot is made for large databases, your establishe ## Source Options -| Name | Type | Required | Default | Description | -|------------------------------------------------|----------|----------|---------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| -| base-url | String | Yes | - | The URL of the JDBC connection. Refer to a case: `jdbc:mysql://localhost:3306:3306/test`. | -| username | String | Yes | - | Name of the database to use when connecting to the database server. | -| password | String | Yes | - | Password to use when connecting to the database server. | -| database-names | List | No | - | Database name of the database to monitor. | -| database-pattern | String | No | .* | The database names RegEx of the database to capture, for example: `database_prefix.*`. | -| table-names | List | Yes | - | Table name of the database to monitor. The table name needs to include the database name, for example: `database_name.table_name` | -| table-pattern | String | Yes | - | The table names RegEx of the database to capture. The table name needs to include the database name, for example: `database.*\\.table_.*` | -| table-names-config | List | No | - | Table config list. for example: [{"table": "db1.schema1.table1","primaryKeys": ["key1"],"snapshotSplitColumn": "key2"}] | -| startup.mode | Enum | No | INITIAL | Optional startup mode for MySQL CDC consumer, valid enumerations are `initial`, `earliest`, `latest` and `specific`.
`initial`: Synchronize historical data at startup, and then synchronize incremental data.
`earliest`: Startup from the earliest offset possible.
`latest`: Startup from the latest offset.
`specific`: Startup from user-supplied specific offsets. | -| startup.specific-offset.file | String | No | - | Start from the specified binlog file name. **Note, This option is required when the `startup.mode` option used `specific`.** | -| startup.specific-offset.pos | Long | No | - | Start from the specified binlog file position. **Note, This option is required when the `startup.mode` option used `specific`.** | -| stop.mode | Enum | No | NEVER | Optional stop mode for MySQL CDC consumer, valid enumerations are `never`, `latest` or `specific`.
`never`: Real-time job don't stop the source.
`latest`: Stop from the latest offset.
`specific`: Stop from user-supplied specific offset. | -| stop.specific-offset.file | String | No | - | Stop from the specified binlog file name. **Note, This option is required when the `stop.mode` option used `specific`.** | -| stop.specific-offset.pos | Long | No | - | Stop from the specified binlog file position. **Note, This option is required when the `stop.mode` option used `specific`.** | -| snapshot.split.size | Integer | No | 8096 | The split size (number of rows) of table snapshot, captured tables are split into multiple splits when read the snapshot of table. | -| snapshot.fetch.size | Integer | No | 1024 | The maximum fetch size for per poll when read table snapshot. | -| server-id | String | No | - | A numeric ID or a numeric ID range of this database client, The numeric ID syntax is like `5400`, the numeric ID range syntax is like '5400-5408'.
Every ID must be unique across all currently-running database processes in the MySQL cluster. This connector joins the
MySQL cluster as another server (with this unique ID) so it can read the binlog.
By default, a random number is generated between 6500 and 2,148,492,146, though we recommend setting an explicit value. | -| server-time-zone | String | No | UTC | The session time zone in database server. If not set, then ZoneId.systemDefault() is used to determine the server time zone. | -| connect.timeout.ms | Duration | No | 30000 | The maximum time that the connector should wait after trying to connect to the database server before timing out. | -| connect.max-retries | Integer | No | 3 | The max retry times that the connector should retry to build database server connection. | -| connection.pool.size | Integer | No | 20 | The jdbc connection pool size. | +| Name | Type | Required | Default | Description | +|------------------------------------------------|----------|----------|---------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| +| base-url | String | Yes | - | The URL of the JDBC connection. Refer to a case: `jdbc:mysql://localhost:3306/test`. | +| username | String | Yes | - | Name of the database to use when connecting to the database server. | +| password | String | Yes | - | Password to use when connecting to the database server. | +| database-names | List | No | - | Database name of the database to monitor. | +| database-pattern | String | No | .* | The database names RegEx of the database to capture, for example: `database_prefix.*`. | +| table-names | List | Yes | - | Table name of the database to monitor. The table name needs to include the database name, for example: `database_name.table_name` | +| table-pattern | String | Yes | - | The table names RegEx of the database to capture. The table name needs to include the database name, for example: `database.*\\.table_.*` | +| table-names-config | List | No | - | Table config list. for example: [{"table": "db1.schema1.table1","primaryKeys": ["key1"],"snapshotSplitColumn": "key2"}] | +| startup.mode | Enum | No | INITIAL | Optional startup mode for MySQL CDC consumer, valid enumerations are `initial`, `earliest`, `latest` and `specific`.
`initial`: Synchronize historical data at startup, and then synchronize incremental data.
`earliest`: Startup from the earliest offset possible.
`latest`: Startup from the latest offset.
`specific`: Startup from user-supplied specific offsets. | +| startup.specific-offset.file | String | No | - | Start from the specified binlog file name. **Note, This option is required when the `startup.mode` option used `specific`.** | +| startup.specific-offset.pos | Long | No | - | Start from the specified binlog file position. **Note, This option is required when the `startup.mode` option used `specific`.** | +| stop.mode | Enum | No | NEVER | Optional stop mode for MySQL CDC consumer, valid enumerations are `never`, `latest` or `specific`.
`never`: Real-time job don't stop the source.
`latest`: Stop from the latest offset.
`specific`: Stop from user-supplied specific offset. | +| stop.specific-offset.file | String | No | - | Stop from the specified binlog file name. **Note, This option is required when the `stop.mode` option used `specific`.** | +| stop.specific-offset.pos | Long | No | - | Stop from the specified binlog file position. **Note, This option is required when the `stop.mode` option used `specific`.** | +| snapshot.split.size | Integer | No | 8096 | The split size (number of rows) of table snapshot, captured tables are split into multiple splits when read the snapshot of table. | +| snapshot.fetch.size | Integer | No | 1024 | The maximum fetch size for per poll when read table snapshot. | +| server-id | String | No | - | A numeric ID or a numeric ID range of this database client, The numeric ID syntax is like `5400`, the numeric ID range syntax is like '5400-5408'.
Every ID must be unique across all currently-running database processes in the MySQL cluster. This connector joins the
MySQL cluster as another server (with this unique ID) so it can read the binlog.
By default, a random number is generated between 6500 and 2,148,492,146, though we recommend setting an explicit value. | +| server-time-zone | String | No | UTC | The session time zone in database server. If not set, then ZoneId.systemDefault() is used to determine the server time zone. | +| connect.timeout.ms | Duration | No | 30000 | The maximum time that the connector should wait after trying to connect to the database server before timing out. | +| connect.max-retries | Integer | No | 3 | The max retry times that the connector should retry to build database server connection. | +| connection.pool.size | Integer | No | 20 | The jdbc connection pool size. | | chunk-key.even-distribution.factor.upper-bound | Double | No | 100 | The upper bound of the chunk key distribution factor. This factor is used to determine whether the table data is evenly distributed. If the distribution factor is calculated to be less than or equal to this upper bound (i.e., (MAX(id) - MIN(id) + 1) / row count), the table chunks would be optimized for even distribution. Otherwise, if the distribution factor is greater, the table will be considered as unevenly distributed and the sampling-based sharding strategy will be used if the estimated shard count exceeds the value specified by `sample-sharding.threshold`. The default value is 100.0. | -| chunk-key.even-distribution.factor.lower-bound | Double | No | 0.05 | The lower bound of the chunk key distribution factor. This factor is used to determine whether the table data is evenly distributed. If the distribution factor is calculated to be greater than or equal to this lower bound (i.e., (MAX(id) - MIN(id) + 1) / row count), the table chunks would be optimized for even distribution. Otherwise, if the distribution factor is less, the table will be considered as unevenly distributed and the sampling-based sharding strategy will be used if the estimated shard count exceeds the value specified by `sample-sharding.threshold`. The default value is 0.05. | -| sample-sharding.threshold | Integer | No | 1000 | This configuration specifies the threshold of estimated shard count to trigger the sample sharding strategy. When the distribution factor is outside the bounds specified by `chunk-key.even-distribution.factor.upper-bound` and `chunk-key.even-distribution.factor.lower-bound`, and the estimated shard count (calculated as approximate row count / chunk size) exceeds this threshold, the sample sharding strategy will be used. This can help to handle large datasets more efficiently. The default value is 1000 shards. | -| inverse-sampling.rate | Integer | No | 1000 | The inverse of the sampling rate used in the sample sharding strategy. For example, if this value is set to 1000, it means a 1/1000 sampling rate is applied during the sampling process. This option provides flexibility in controlling the granularity of the sampling, thus affecting the final number of shards. It's especially useful when dealing with very large datasets where a lower sampling rate is preferred. The default value is 1000. | -| exactly_once | Boolean | No | false | Enable exactly once semantic. | -| format | Enum | No | DEFAULT | Optional output format for MySQL CDC, valid enumerations are `DEFAULT`、`COMPATIBLE_DEBEZIUM_JSON`. | -| schema-changes.enabled | Boolean | No | false | Schema evolution is disabled by default. Now we only support `add column`、`drop column`、`rename column` and `modify column`. | -| debezium | Config | No | - | Pass-through [Debezium's properties](https://github.com/debezium/debezium/blob/v1.9.8.Final/documentation/modules/ROOT/pages/connectors/mysql.adoc#connector-properties) to Debezium Embedded Engine which is used to capture data changes from MySQL server. | -| common-options | | no | - | Source plugin common parameters, please refer to [Source Common Options](../source-common-options.md) for details | +| chunk-key.even-distribution.factor.lower-bound | Double | No | 0.05 | The lower bound of the chunk key distribution factor. This factor is used to determine whether the table data is evenly distributed. If the distribution factor is calculated to be greater than or equal to this lower bound (i.e., (MAX(id) - MIN(id) + 1) / row count), the table chunks would be optimized for even distribution. Otherwise, if the distribution factor is less, the table will be considered as unevenly distributed and the sampling-based sharding strategy will be used if the estimated shard count exceeds the value specified by `sample-sharding.threshold`. The default value is 0.05. | +| sample-sharding.threshold | Integer | No | 1000 | This configuration specifies the threshold of estimated shard count to trigger the sample sharding strategy. When the distribution factor is outside the bounds specified by `chunk-key.even-distribution.factor.upper-bound` and `chunk-key.even-distribution.factor.lower-bound`, and the estimated shard count (calculated as approximate row count / chunk size) exceeds this threshold, the sample sharding strategy will be used. This can help to handle large datasets more efficiently. The default value is 1000 shards. | +| inverse-sampling.rate | Integer | No | 1000 | The inverse of the sampling rate used in the sample sharding strategy. For example, if this value is set to 1000, it means a 1/1000 sampling rate is applied during the sampling process. This option provides flexibility in controlling the granularity of the sampling, thus affecting the final number of shards. It's especially useful when dealing with very large datasets where a lower sampling rate is preferred. The default value is 1000. | +| exactly_once | Boolean | No | false | Enable exactly once semantic. | +| format | Enum | No | DEFAULT | Optional output format for MySQL CDC, valid enumerations are `DEFAULT`、`COMPATIBLE_DEBEZIUM_JSON`. | +| schema-changes.enabled | Boolean | No | false | Schema evolution is disabled by default. Now we only support `add column`、`drop column`、`rename column` and `modify column`. | +| debezium | Config | No | - | Pass-through [Debezium's properties](https://github.com/debezium/debezium/blob/v1.9.8.Final/documentation/modules/ROOT/pages/connectors/mysql.adoc#connector-properties) to Debezium Embedded Engine which is used to capture data changes from MySQL server. | +| common-options | | no | - | Source plugin common parameters, please refer to [Source Common Options](../source-common-options.md) for details | ## Task Example