DHTesp.cpp

/******************************************************************
  DHT Temperature & Humidity Sensor library for Arduino & ESP32.

  Features:
  - Support for DHT11 and DHT22/AM2302/RHT03
  - Auto detect sensor model
  - Very low memory footprint
  - Very small code

  https://github.com/beegee-tokyo/arduino-DHTesp

  Written by Mark Ruys, mark@paracas.nl.
  Updated to work with ESP32 by Bernd Giesecke, bernd@giesecke.tk

  GNU General Public License, check LICENSE for more information.
  All text above must be included in any redistribution.

  Datasheets:
  - http://www.micro4you.com/files/sensor/DHT11.pdf
  - http://www.adafruit.com/datasheets/DHT22.pdf
  - http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Weather/RHT03.pdf
  - http://meteobox.tk/files/AM2302.pdf

  Changelog:
    see README.md
******************************************************************/

#include "DHTesp.h"

void DHTesp::setup(uint8_t pin, DHT_MODEL_t model)
{
	DHTesp::pin = pin;
	DHTesp::model = model;
	DHTesp::resetTimer(); // Make sure we do read the sensor in the next readSensor()

	if (model == AUTO_DETECT)
	{
		DHTesp::model = DHT22;
		readSensor();
		if (error == ERROR_TIMEOUT)
		{
			DHTesp::model = DHT11;
			// Warning: in case we auto detect a DHT11, you should wait at least 1000 msec
			// before your first read request. Otherwise you will get a time out error.
		}
	}

	//Set default comfort profile.

	//In computing these constants the following reference was used
	//http://epb.apogee.net/res/refcomf.asp
	//It was simplified as 4 straight lines and added very little skew on
	//the vertical lines (+0.1 on x for C,D)
	//The for points used are(from top left, clock wise)
	//A(30%, 30*C) B(70%, 26.2*C) C(70.1%, 20.55*C) D(30.1%, 22.22*C)
	//On the X axis we have the rel humidity in % and on the Y axis the temperature in *C

	//Too hot line AB
	m_comfort.m_tooHot_m = -0.095;
	m_comfort.m_tooHot_b = 32.85;
	//Too humid line BC
	m_comfort.m_tooHumid_m = -56.5;
	m_comfort.m_tooHumid_b = 3981.2;
	//Too cold line DC
	m_comfort.m_tooCold_m = -0.04175;
	m_comfort.m_tooHCold_b = 23.476675;
	//Too dry line AD
	m_comfort.m_tooDry_m = -77.8;
	m_comfort.m_tooDry_b = 2364;
}

void DHTesp::resetTimer()
{
	DHTesp::lastReadTime = millis() - 3000;
}

float DHTesp::getHumidity()
{
	readSensor();
	if (error == ERROR_TIMEOUT)
	{ // Try a second time to read
		readSensor();
	}
	return humidity;
}

float DHTesp::getTemperature()
{
	readSensor();
	if (error == ERROR_TIMEOUT)
	{ // Try a second time to read
		readSensor();
	}
	return temperature;
}

TempAndHumidity DHTesp::getTempAndHumidity()
{
	readSensor();
	if (error == ERROR_TIMEOUT)
	{ // Try a second time to read
		readSensor();
	}
	values.temperature = temperature;
	values.humidity = humidity;
	return values;
}

#ifndef OPTIMIZE_SRAM_SIZE

const char *DHTesp::getStatusString()
{
	switch (error)
	{
	case DHTesp::ERROR_TIMEOUT:
		return "TIMEOUT";

	case DHTesp::ERROR_CHECKSUM:
		return "CHECKSUM";

	default:
		return "OK";
	}
}

#else

// At the expense of 26 bytes of extra PROGMEM, we save 11 bytes of
// SRAM by using the following method:

prog_char P_OK[] PROGMEM = "OK";
prog_char P_TIMEOUT[] PROGMEM = "TIMEOUT";
prog_char P_CHECKSUM[] PROGMEM = "CHECKSUM";

const char *DHTesp::getStatusString()
{
	prog_char *c;
	switch (error)
	{
	case DHTesp::ERROR_CHECKSUM:
		c = P_CHECKSUM;
		break;

	case DHTesp::ERROR_TIMEOUT:
		c = P_TIMEOUT;
		break;

	default:
		c = P_OK;
		break;
	}

	static char buffer[9];
	strcpy_P(buffer, c);

	return buffer;
}

#endif

void DHTesp::readSensor()
{
	// Make sure we don't poll the sensor too often
	// - Max sample rate DHT11 is 1 Hz   (duty cicle 1000 ms)
	// - Max sample rate DHT22 is 0.5 Hz (duty cicle 2000 ms)
	unsigned long startTime = millis();
	if ((unsigned long)(startTime - lastReadTime) < (model == DHT11 ? 999L : 1999L))
	{
		return;
	}
	lastReadTime = startTime;

	temperature = NAN;
	humidity = NAN;

	uint16_t rawHumidity = 0;
	uint16_t rawTemperature = 0;
	uint16_t data = 0;

	// Request sample
	digitalWrite(pin, LOW); // Send start signal
	pinMode(pin, OUTPUT);
	if (model == DHT11)
	{
		delay(18);
	}
	else
	{
		// This will fail for a DHT11 - that's how we can detect such a device
		delay(2);
	}

	pinMode(pin, INPUT);
	digitalWrite(pin, HIGH); // Switch bus to receive data

	// We're going to read 83 edges:
	// - First a FALLING, RISING, and FALLING edge for the start bit
	// - Then 40 bits: RISING and then a FALLING edge per bit
	// To keep our code simple, we accept any HIGH or LOW reading if it's max 85 usecs long

#ifdef ESP32
	// ESP32 is a multi core / multi processing chip
	// It is necessary to disable task switches during the readings
	portMUX_TYPE mux = portMUX_INITIALIZER_UNLOCKED;
	portENTER_CRITICAL(&mux);
#else
	//   cli();
	noInterrupts();
#endif
	for (int8_t i = -3; i < 2 * 40; i++)
	{
		byte age;
		startTime = micros();

		do
		{
			age = (unsigned long)(micros() - startTime);
			if (age > 90)
			{
				error = ERROR_TIMEOUT;
#ifdef ESP32
				portEXIT_CRITICAL(&mux);
#else
				// sei();
				interrupts();
#endif
				return;
			}
		} while (digitalRead(pin) == (i & 1) ? HIGH : LOW);

		if (i >= 0 && (i & 1))
		{
			// Now we are being fed our 40 bits
			data <<= 1;

			// A zero max 30 usecs, a one at least 68 usecs.
			if (age > 30)
			{
				data |= 1; // we got a one
			}
		}

		switch (i)
		{
		case 31:
			rawHumidity = data;
			break;
		case 63:
			rawTemperature = data;
			data = 0;
			break;
		}
	}

#ifdef ESP32
	portEXIT_CRITICAL(&mux);
#else
	//   sei();
	interrupts();
#endif

	// Verify checksum

	if ((byte)(((byte)rawHumidity) + (rawHumidity >> 8) + ((byte)rawTemperature) + (rawTemperature >> 8)) != data)
	{
		error = ERROR_CHECKSUM;
		return;
	}

	// Store readings

	if (model == DHT11)
	{
		humidity = (rawHumidity >> 8) + ((rawHumidity & 0x00FF) * 0.1);
		temperature = (rawTemperature >> 8) + ((rawTemperature & 0x007F) * 0.1);
		if (rawTemperature & 0x0080)
		{
			temperature = -temperature;
		}
	}
	else
	{
		humidity = rawHumidity * 0.1;

		if (rawTemperature & 0x8000)
		{
			rawTemperature = -(int16_t)(rawTemperature & 0x7FFF);
		}
		temperature = ((int16_t)rawTemperature) * 0.1;
	}

	error = ERROR_NONE;
}

//boolean isFahrenheit: True == Fahrenheit; False == Celcius
float DHTesp::computeHeatIndex(float temperature, float percentHumidity, bool isFahrenheit)
{
	// Using both Rothfusz and Steadman's equations
	// http://www.wpc.ncep.noaa.gov/html/heatindex_equation.shtml
	float hi;

	if (!isFahrenheit)
	{
		temperature = toFahrenheit(temperature);
	}

	hi = 0.5 * (temperature + 61.0 + ((temperature - 68.0) * 1.2) + (percentHumidity * 0.094));

	if (hi > 79)
	{
		hi = -42.379 +
			 2.04901523 * temperature +
			 10.14333127 * percentHumidity +
			 -0.22475541 * temperature * percentHumidity +
			 -0.00683783 * pow(temperature, 2) +
			 -0.05481717 * pow(percentHumidity, 2) +
			 0.00122874 * pow(temperature, 2) * percentHumidity +
			 0.00085282 * temperature * pow(percentHumidity, 2) +
			 -0.00000199 * pow(temperature, 2) * pow(percentHumidity, 2);

		if ((percentHumidity < 13) && (temperature >= 80.0) && (temperature <= 112.0))
			hi -= ((13.0 - percentHumidity) * 0.25) * sqrt((17.0 - abs(temperature - 95.0)) * 0.05882);

		else if ((percentHumidity > 85.0) && (temperature >= 80.0) && (temperature <= 87.0))
			hi += ((percentHumidity - 85.0) * 0.1) * ((87.0 - temperature) * 0.2);
	}

	return isFahrenheit ? hi : toCelsius(hi);
}

//boolean isFahrenheit: True == Fahrenheit; False == Celcius
float DHTesp::computeDewPoint(float temperature, float percentHumidity, bool isFahrenheit)
{
	// reference: http://wahiduddin.net/calc/density_algorithms.htm
	if (isFahrenheit)
	{
		temperature = toCelsius(temperature);
	}
	double calc_temp = 373.15 / (273.15 + (double)temperature);
	double calc_sum = -7.90298 * (calc_temp - 1);
	calc_sum += 5.02808 * log10(calc_temp);
	calc_sum += -1.3816e-7 * (pow(10, (11.344 * (1 - 1 / calc_temp))) - 1);
	calc_sum += 8.1328e-3 * (pow(10, (-3.49149 * (calc_temp - 1))) - 1);
	calc_sum += log10(1013.246);
	double calc_value = pow(10, calc_sum - 3) * (double)percentHumidity;
	double calc_dew_temp = log(calc_value / 0.61078); // temp var
	calc_dew_temp = (241.88 * calc_dew_temp) / (17.558 - calc_dew_temp);
	return isFahrenheit ? toFahrenheit(calc_dew_temp) : calc_dew_temp;
}

//boolean isFahrenheit: True == Fahrenheit; False == Celcius
byte DHTesp::computePerception(float temperature, float percentHumidity, bool isFahrenheit)
{
	// Computing human perception from dew point
	// reference: https://en.wikipedia.org/wiki/Dew_point ==> Relationship to human comfort
	// reference: Horstmeyer, Steve (2006-08-15). "Relative Humidity....Relative to What? The Dew Point Temperature...a better approach". Steve Horstmeyer, Meteorologist, WKRC TV, Cincinnati, Ohio, USA. Retrieved 2009-08-20.
	// Using table
	// Return value Dew point    Human perception[6]
	//    7         Over 26 °C   Severely high, even deadly for asthma related illnesses
	//    6         24–26 °C     Extremely uncomfortable, oppressive
	//    5         21–24 °C     Very humid, quite uncomfortable
	//    4         18–21 °C     Somewhat uncomfortable for most people at upper edge
	//    3         16–18 °C     OK for most, but all perceive the humidity at upper edge
	//    2         13–16 °C     Comfortable
	//    1         10–12 °C     Very comfortable
	//    0         Under 10 °C  A bit dry for some

	if (isFahrenheit)
	{
		temperature = toCelsius(temperature);
	}
	float dewPoint = computeDewPoint(temperature, percentHumidity);

	if (dewPoint < 10.0f)
	{
		return Perception_Dry;
	}
	else if (dewPoint < 13.0f)
	{
		return Perception_VeryComfy;
	}
	else if (dewPoint < 16.0f)
	{
		return Perception_Comfy;
	}
	else if (dewPoint < 18.0f)
	{
		return Perception_Ok;
	}
	else if (dewPoint < 21.0f)
	{
		return Perception_UnComfy;
	}
	else if (dewPoint < 24.0f)
	{
		return Perception_QuiteUnComfy;
	}
	else if (dewPoint < 26.0f)
	{
		return Perception_VeryUnComfy;
	}
	// else dew >= 26.0
	return Perception_SevereUncomfy;
}

//boolean isFahrenheit: True == Fahrenheit; False == Celcius
float DHTesp::getComfortRatio(ComfortState &destComfortStatus, float temperature, float percentHumidity, bool isFahrenheit)
{
	float ratio = 100; //100%
	float distance = 0;
	float kTempFactor = 3;	//take into account the slope of the lines
	float kHumidFactor = 0.1; //take into account the slope of the lines
	uint8_t tempComfort = 0;

	if (isFahrenheit)
	{
		temperature = toCelsius(temperature);
	}

	destComfortStatus = Comfort_OK;

	distance = m_comfort.distanceTooHot(temperature, percentHumidity);
	if (distance > 0)
	{
		//update the comfort descriptor
		tempComfort += (uint8_t)Comfort_TooHot;
		//decrease the comfot ratio taking the distance into account
		ratio -= distance * kTempFactor;
	}

	distance = m_comfort.distanceTooHumid(temperature, percentHumidity);
	if (distance > 0)
	{
		//update the comfort descriptor
		tempComfort += (uint8_t)Comfort_TooHumid;
		//decrease the comfot ratio taking the distance into account
		ratio -= distance * kHumidFactor;
	}

	distance = m_comfort.distanceTooCold(temperature, percentHumidity);
	if (distance > 0)
	{
		//update the comfort descriptor
		tempComfort += (uint8_t)Comfort_TooCold;
		//decrease the comfot ratio taking the distance into account
		ratio -= distance * kTempFactor;
	}

	distance = m_comfort.distanceTooDry(temperature, percentHumidity);
	if (distance > 0)
	{
		//update the comfort descriptor
		tempComfort += (uint8_t)Comfort_TooDry;
		//decrease the comfot ratio taking the distance into account
		ratio -= distance * kHumidFactor;
	}

	destComfortStatus = (ComfortState)tempComfort;

	if (ratio < 0)
		ratio = 0;

	return ratio;
}

float DHTesp::computeAbsoluteHumidity(float temperature, float percentHumidity, bool isFahrenheit)
{
	// Calculate the absolute humidity in g/m³
	// https://carnotcycle.wordpress.com/2012/08/04/how-to-convert-relative-humidity-to-absolute-humidity/
	if (isFahrenheit)
	{
		temperature = toCelsius(temperature);
	}

	float absHumidity;
	float absTemperature;
	absTemperature = temperature + 273.15;

	absHumidity = 6.112;
	absHumidity *= exp((17.67 * temperature) / (243.5 + temperature));
	absHumidity *= percentHumidity;
	absHumidity *= 2.1674;
	absHumidity /= absTemperature;

	return absHumidity;
}