Skip to content

Latest commit

 

History

History
227 lines (165 loc) · 19.3 KB

README.md

File metadata and controls

227 lines (165 loc) · 19.3 KB

Linking 96% of Grin transactions

TL;DR: I modified a Grin full node into a sniffer node that logs all intermediary transaction gossiping data, including not-yet-aggregated transactions. Using this data, I was able to trace 96% of all Grin transactions, revealing the transaction graph almost fully and uncovering who paid who in the Grin network. For a longer summary, check out the FAQ at the end.

Grin is a privacy coin with a design that's uniquely distinct from either Zcash or Monero. Grin was built on top of MimbleWimble, a privacy protocol that was published anonymously on a Tor hosting service in 2016. Later, an anonymous team of developers working under Harry Potter-themed names banded together and decided to implement MimbleWimble in a cryptocurrency, which they named Grin. Grin's mainnet launched in January 2019 after two years of development. Following the spirit of Satoshi Nakamoto, Grin did a "fair launch" with no premine, no developer reward, and no investors.

How Grin achieves privacy

Let's begin by describing the protocol. At first glance, Grin is similar to Bitcoin: both use proof-of-work and the UTXO model for payments. But Grin has four key additional features that aim to enhance its privacy.

  1. Grin uses the same Confidential Transactions (CT) protocol as Monero to hide the amount of each UTXOs.
  2. All transactions in a block are aggregated together, essentially making each block one giant CoinJoin. As a result, each block is a single bundle of inputs and outputs, which hides the transaction graph, with no easy way to determine who paid who within a block.
  3. There are no addresses, only UTXOs hidden as Pedersen commitments. One downside of this approach is that the sender and the receiver need to communicate with each other off-chain (which makes wallet implementations and exchange integrations more complex).
  4. Grin uses "patient Dandelion", an enhanced version of Bitcoin's Dandelion proposal, which hide the IP addresses that originated any given transaction.

The first part, hiding transaction amounts, is beyond the scope of this post. For a detailed overview of this part of the protocol, check out this excellent post by Brandon Arvanaghi. The short version is that amounts are hidden as commitments and every transaction has a "kernel", which proves the transaction's inputs sum up to the same value as the transaction's outputs (in other words, that no new money was created out of thin air).

In Bitcoin, for example, you might have a transaction with one input and two outputs: (UTXO1, amount1) -> (UTXO2, amount2), (UTXO3, amount3). The values amount1, amount2, amount3 are public, known to everyone, and every full node checks that amount1 = amount2 + amount3 before accepting the transaction.

In Grin, the transaction will look like: (Commitment1 -> Commitment2, Commitment3; Kernel123). While the amounts of money hidden behind the commitments are unknown, Kernel123 is a zero-knowledge proof that Commitment1 = Commitment2 + Commitment3 (whatever the amounts actually are), and further, that the amounts are non-negative.

Transactions get aggregated together and mined into blocks

The second privacy feature, merging all transactions together to hide the transaction graph, is arguably Grin's most important. If the transaction graph itself is perfectly hidden, hiding the amounts is less important – the only thing that can be gleaned by seeing anonymous amounts flying around is the total daily transaction volume. However, if the transaction graph can be uncovered, even with the amounts hidden, an observer can still extract tons of metadata and uncover the flow of payments. Say I’m law enforcement, and I know that an address belongs to a vendor on a darknet market. When you send your Grin coins to Coinbase, Coinbase links your address with your name. Since I can see the entire transaction graph, I now know you did business with a darknet market, and I can indict you for purchasing illegal goods.

The transaction graph is precisely what we target in this attack, so let me now explain how Grin aims to hide it in more detail.

Grin's approach to anonymization is similar to Bitcoin's CoinJoin, a privacy technique that merges inputs and outputs from several participants. Unlike Bitcoin, in Grin the participants do not need to collaborate interactively to merge their transactions. Any two transactions can be merged by anyone while en route in the P2P network (and then merged further with any other incoming transactions). The only thing that remains are the kernels, which are required to prove that all the inputs sum up to all the outputs, and that no new money was printed during the merge.

These kernels will later allow us to evaluate the success of the attack. Every user-issued transaction has a single kernel, and as transactions are merged, the kernels are concatenated. Imagine a certain block has 3 kernels, 10 inputs and 15 outputs. If not for the kernels, it could have been a block with 10 transactions. But given there were only 3 kernels, we know we only need to group the inputs and outputs into 3 buckets (belonging to 3 senders).

Transaction broadcasting and Dandelion

Research shows that broadcasting transactions naively allows observers to link transactions to their originating IP addresses, which is precisely what firms like Chainalysis do to deanonymize Bitcoin transactions.

Dandelion is a proposal to fix this through a two-phase approach to gossiping transactions. First, there is a "stem" phase, followed by a more normal "fluff" phase (hence "dandelion"). In stem phase, the transaction is passed to a single random peer node, which forwards it to another random peer node, until the transaction is likely some large distance away from its originator in the node network. After that, the transaction enters the fluff phase and is broadcasted to all the available nodes on the network. This breaks the link between the propagator of a transaction and its originator.

Grin further modifies this protocol to a version they call "patient Dandelion", which not only protects the sender's IP address, but also holds transactions in "stem" phase for some time (~10 per each hop on the stem path). This gives transactions a chance to aggregate with other transactions before they are broadcast widely.

How transactions propagate with Dandelion. Stem phase (maximizing anonymity) followed by fluff phase (maximizing spread)

The attack uncovers the transaction graph in Grin and does not attempt to uncover the IP addresses. Given that Dandelion protects IP addresses, it may seem unrelated to the attack. However, the different transaction propagation under Dandelion is exactly the reason we can trace ~96% of the transactions (as opposed to ~100%), and so an understanding of Dandelion will come in handy later.

Explanation of the attack

The simplest version of the attack is to run a Grin full node modified to log all the transactions it encounters (let's call this a sniffer node). In particular, we're logging all of the intermediary pending transactions that are gossiped around before a block is finalized and aggregated into a single mega-transaction. If a certain transaction is encountered before it is merged with others, a sniffer node can establish a direct link between its inputs and outputs.

Logger plugged into grin/servers/src/common/hooks.rs. There are several places where transactions are handled in the codebase, but this hook allows to store pending transactions as well as confirmed ones, basically everything the node ever processes. The fancy syntax is just Rust's version of printing a vector.

Even if we don't manage to sniff a particular transaction in the wild, by keeping a full log we can trace some of them retroactively, by using partial information to infer progressively more and more information about the transaction graph. For example, let's say TransactionA was broadcast and sniffed by the sniffer node. Later, TransactionB was produced by another user and merged with TransactionA in-flight. The sniffer node may have never seen TransactionB itself, but sniffing TransactionA as well as the merge of TransactionA+B is sufficient to uncover the inputs and outputs that belong to TransactionB. In other words, we can derive TransactionB with the equation: TransactionB = TransactionA+B - TransactionA.

"Tracing by subtraction" progressive linking as the sniffer node accumulates data

To increase the percentage of sniffed transactions, a sniffer node should have as many peers as possible, to encounter every transaction as early as possible, before it was merged at some stage in the network. With sufficiently high bandwidth, it is possible to connect to every node on the network as its peer, becoming a so-called supernode. Such a supernode would immediately encounter every transaction as it enters the "fluff" phase.

Peer count is important for sniffing transactions before they were merged with others and anonymized. The preferred peer count is more relevant here, and 8 is way too small for our nefarious purposes.

In practice, any node with a fairly large number of peers, should be able to trace almost every Grin transaction. The only transactions we cannot trace are the transactions that happened to collide on each other's stem paths, and were merged there. Even then, running several supernodes gives an attacker a high probability of placing themselves onto every stempath, thus further tracing even the remaining tiny percentage. As an alternative to the complex business of maintaining a supernode, an attacker could instead flood the network with regular nodes: if an attacker controls a large percentage of all nodes in the network, the probability that every transaction passes one of their sniffer nodes approaches 100%.

A supernode is connected to every other node and will instantly get any transaction that enters fluff phase, before it can be merged with other transactions for anonymity.

Methodology and results

In practice, I had been running 3 sniffer nodes with ~200 peers for a period from May 10 until May 15. Two were high-bandwidth AWS nodes, and another I rented on Hetzner. Each of the nodes was logging the full composition of every pending transaction it encountered: the inputs, the outputs and the kernels.

During that time frame (roughly blocks from 164696 to 170350, depending on the node), Grin users have sent a total of ~8.8 thousand transactions. Recall that transactions have kernels that persist through merging, so we can calculate the total number of transactions by adding up the number of kernels in each block. Out of these 8.8 thousand transactions, the sniffer nodes immediately caught 8.4 thousand before they could merge with any other transactions (stats per node: 8509 out of 8905 AWS-EU, 8438 out of 8843 AWS-US, 8503 out of 8905 Hetzner), which translates to ~95.5% transactions traced by each node.

An unexpected empirical result was that "tracing by subtraction" added practically no improvement: there were only 5-10 transaction in total that were traced by subtraction, the rest were sniffed independently. This means the sniffer nodes are very good at capturing all fluff-phase transactions before any of them are merged with any other fluff-phase transactions. Theoretically, the only transactions we truly cannot trace are the ones that happened to merge while both of them were in stem-phase. Given a typical stem path length is ~10 nodes, this means two transactions have at least one node in common in their stem paths, out of thousands of nodes on the network.

The code to run the sniffer node is published at https://github.com/bogatyy/grin – try out running your own! The logs from the 3 machines and the code analyzing it are published here in this Github. Feel free to reproduce my numbers or play around further. Or, if you used Grin between May 10 and 15, you may be able to find yourself in the logs. ;)

Final thoughts

Getting privacy right is extremely hard, as this research demonstrates. Even a single flaw in a protocol design can lead to almost the entire transaction graph being reconstructed. Luckily the Grin core devs were aware that such an attack was theoretically possible, even if the extent and possible solutions were unclear. Mohamed Fouda hypothesized a similar attack in his excellent Grin overview. In practice, this attack downgrades Grin's privacy to that of Bitcoin with mandatory nonreusable addresses and hidden amounts—which may actually be sufficient for many use cases!

Beam, another cryptocurrency built following the MimbleWimble protocol, is similarly vulnerable to the best of my understanding. Compared to Grin, Beam has an extra privacy feature, namely decoy outputs produced to obfuscate the real ones. However, all these decoys still have to belong to the same user, which (compared to Monero) limits how much the transaction graph can be actually obfuscated. In other words, if Alice paid Bob using BEAM, the graph link would still be undeniably present.

Another good way to frame this attack is to compare it with previous attacks on Monero (one, two). Recall that Monero creates a large anonymity set at the cost of wasted HDD space (in extra on-chain decoys). After the Monero attack was discovered, it was mitigated by increasing the mandatory minimum number of decoys, which is another way of saying: users didn't pay enough in HDD space.

When defending against this attack, Grin can lower the 96% traceability rate by increasing the Dandelion patience timer. In other words, more privacy could come at the expense of paying more in wasted time. For a more thorough discussion on mitigations, check out the FAQ right below.

Thanks to Haseeb Qureshi for major help in putting together this write-up and for the anonymity set illustrations. Additional thanks to Oleg Ostroumov, Elena Nadolinksi, Mohamed Fouda and Nader Al-Naji for reviewing drafts of this post. And a huge thanks to Jake Stutzman (NEAR Protocol) for the Dandelion and block aggregation illustrations.

For more of my writing, follow me on Twitter at https://twitter.com/IvanBogatyy.

FAQ

So what can and cannot be uncovered? Isn't everything encrypted?

The amounts are 100% protected, using a simple and proven technique of Pedersen commitments. We do not aim to uncover the IP addresses either. What we uncover is the transaction graph: the record of who paid whom.

What does it mean to trace a transaction? How do you know you've succeeded?

A MimbleWimble transaction can have multiple inputs and outputs, but only a single kernel. When transactions are aggregated for anonymity, their kernels are aggregated too, so everyone knows how many transactions are in there originally (although the relationships between inputs and outputs are scrambled). So if an attacker sees an aggregated block with 5 kernels, they know they would need to separate all the inputs and outputs of that block into 5 transactions to know exactly who paid whom.

Further, even if they manage to separate the block into 4 buckets, that would be a drastic reduction of the anonymity set as well. It would mean that out of 5 transactions, 3 got linked completely, and the other 2 only have each other remaining in the anonymity set.

What is an anonymity set? How does it work in Zcash, Monero and MimbleWimble?

An anonymity set is about plausible deniability. An anonymity set of 1 (e.g. in Bitcoin) means everyone knows the payment came from your address. An anonymity set of N means there are N people who could have plausibly been the senders, giving the real sender a kind of "herd immunity."

In Zcash, the entire shielded pool is the anonymity set (so everyone is hidden behind everyone else). In Monero, you can pick any on-chain UTXOs for decoys, and so you're free to choose your own anonymity set (in practice, it tends to be no more than 10-20 other addresses).

In MimbleWimble, your anonymity set is all the other transactions inside the same block. If a block has many transactions, your protections are better, but if no one sent a transaction within the block timeline (1 minute), you may be the only person in that block.

Can this be mitigated by the user waiting to aggregate with other transactions before broadcasting their own?

Not really. For two transactions to merge, at least one of them has to be traversing the peer-to-peer gossip network. So if no one is the first to broadcast their transaction, no transactions could proceed at all.

Futher, even for a single patient user, this strategy is unlikely to work because of "tracing by subtraction", as explaned above.

Can this be mitigated by increasing the Dandelion patience timer?

Not really. As explained above, the 4% of transactions we could not trace are indeed caused by Dandelion. If Grin were to increase the Dandelion patience timer, that 4% number could plausibly be higher. On the other hand, either running more sniffer nodes or turning them into supernodes (by connecting to more peers) would lead to many more transactions linked, plausibly 99% or more.

Can this be mitigated by producing a lot of fake tiny transactions?

Not really. The decoy transactions would only matter if they can plausibly look like real transactions. Dangling unspent commitments would not help hide the transaction graphs, and sending money to yourself wouldn't either, since it would never be spent again. These dangling transactions could safely be ignored. The only way to create robust k-anonymity through decoys is to have the decoys look statistically indistinguishable from real payments.

The best version of this defense would be to find 5-15 live peers (remember that Mimblewimble requires participants to communicate for a payment to occur), convince the peers to receive your dust payments, and then broadcast the total aggregated transaction as one. However, taking a dust amount payment reduces one's privacy and would likely be turned off in safer node implementations.

Ultimately, the best version of decoy-heavy Mimblewimble would look like a worse version of Monero.

Do I need to run a supernode to perform this attack?

No. You can link 96% of transactions with a regular PC. With a true supernode (~3000 peers), you could possibly link 99%+ of all transactions.