DOC_multiadvertisers.md

#Multiple advertisers Estimote Location Beacons are able to advertise multiple data packets simultaneously. Here is a full list of featured advertisers:

1. Connectivity
2. Estimote Telemetry
3. Estimote Location
4. iBeacon
5. Eddystone UID
6. Eddystone URL
7. Eddystone Telemetry

You can adjust each advertiser to have its own Tx power and advertising interval. You can set advertising interval in the range of 100 - 10000 ms and Tx power as one of the allowed values: -30, -20, -16, -12, -8, -4, 0, 4 dBm ###Connectivity Estimote Connectivity packet lets you connect to a beacon. You can adjust its interval and power using get() and set() methods. This advertiser is always on and cannot be disabled.

int txPower = -8;
connection.settings.estimote.connectivity.transmitPower().set(txPower, new SettingCallback<Integer>() {...});

int advertisingInterval = 1000;
connection.settings.estimote.connectivity.advertisingInterval().set(advertisingInterval, new SettingCallback<Integer>(){...});

###Estimote Telemetry Estimote Telemetry advertiser provides information from beacon's sensors and GPIO. You can enable/disable it by using set() method:

boolean enable = true;
connection.settings.estimote.telemetry.enable().set(enable, new SettingCallback<Boolean>() {
  @Override
  public void onSuccess(Boolean value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

You can also modify Tx power and advertising interval:

int txPower = -8;
connection.settings.estimote.telemetry.transmitPower().set(txPower, new SettingCallback<Integer>() {...});

int advertisingInterval = 1000;
connection.settings.estimote.telemetry.advertisingInterval().set(txPower, new SettingCallback<Integer>() {...});

###Estimote Location Beacon measured power advertiser. For getting distance to device.

connection.settings.estimote.location.enable()

Modifying transmit power:

int txPower = -8;
connection.settings.estimote.location.transmitPower().set(txPower, new SettingCallback<Integer>() {...});

Modifying advertising interval:

int advertisingInterval = 1000;
connection.settings.estimote.location.advertisingInterval().set(txPower, new SettingCallback<Integer>() {...});

###iBeacon Using and modifying iBeacon advertiser is also possible with our SDK. Here is how you can enable your iBeacon advertising:

boolean enable = true;
connection.settings.beacon.enable().set(enable, new SettingCallback<Boolean>() {
  @Override
  public void onSuccess(Boolean value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

By default, Apple's iBeacon protocol has interval fixed at 100 ms. We strongly recommend using this default value for optimal ranging/monitoring performance. If you want to change it, you need to turn your beacon into non-strict mode. Beacons in non-strict mode technically are not considered iBeacon-enabled by they are compatible with iBeacon apps:

boolean enable = true;
connection.settings.beacon.nonStrictMode().set(enable, new SettingCallback<Boolean>() {
    @Override
    public void onSuccess(Boolean value) {
      // Handle success here
    }

    @Override
    public void onFailure(DeviceConnectionException exception) {
      // Handle failure here
    }
  });

Then you will be able to change advertising interval:

int advertisingInterval = 1000;
connection.settings.estimote.beacon.advertisingInterval().set(txPower, new SettingCallback<Integer>() {...});

Beside of that, you can always modify your transmit power:

int txPower = -8;
connection.settings.estimote.beacon.transmitPower().set(txPower, new SettingCallback<Integer>() {...});

Changing beacon proximity UUID:

UUID newUUID = UUID.randomUUID();
connection.settings.beacon.proximityUUID().set(newUUID, new SettingCallback<UUID>() {
  @Override
  public void onSuccess(UUID value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

Changing minor and major:

int minor = 1000;
connection.settings.beacon.minor().set(minor, new SettingCallback<Integer>() {
  @Override
  public void onSuccess(Integer value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

int major = 2000;
connection.settings.beacon.major().set(major, new SettingCallback<Integer>() {
  @Override
  public void onSuccess(Integer value) {
   // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

Enabling secure mode:

boolean enable = true;
connection.settings.beacon.secure().set(enable, new SettingCallback<Boolean>() {
  @Override
  public void onSuccess(Boolean value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

You can also enable motion UUID - it advertises different UUID when the beacon is in motion:

boolean enable = true;
connection.settings.beacon.enableMotionUUID().set(enable, new SettingCallback<Boolean>() {
  @Override
  public void onSuccess(Boolean value) {
      // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
      // Handle failure here
  }
});

###Eddystone Eddystone packets can be modified using set() and get() methods as in examples above. For more info about each Eddystone packet please read our article.

####Eddystone UID

boolean enable = true;
connection.settings.eddystone.uid.enable().set(enable, new SettingCallback<Boolean>() {...});

Modifying advertising interval:

int advertisingInterval = 1000;
connection.settings.eddystone.uid.advertisingInterval().set(advertisingInterval, new SettingCallback<Integer>() {...});

Modifying transmit power:

int txPower = -8;
connection.settings.eddystone.uid.transmitPower().set(txPower, new SettingCallback<Integer>() {...});

Modifying namespace:

String namespace = "EDD1EBEAC04E5DEFA017";
connection.settings.eddystone.uid.namespace().set(namespace, new SettingCallback<String>() {
  @Override
  public void onSuccess(String value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

Modifying instance:

String instance = "0BDB87539B67";
connection.settings.eddystone.uid.instance().set(instance, new SettingCallback<String>() {
  @Override
  public void onSuccess(String value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

####Eddystone URL

boolean enable = true;
connection.settings.eddystone.url.enable().set(enable, new SettingCallback<Boolean>() {
  @Override
  public void onSuccess(Boolean value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

Modifying transmit power:

int txPower = -8;
connection.settings.eddystone.url.transmitPower().set(txPower, new SettingCallback<Integer>() {...});

Modifying advertising interval:

int advertisingInterval = 1000;
connection.settings.eddystone.url.advertisingInterval(advertisingInterval, new SettingCallback<Integer>() {...});

Modifying url value:

String url = "http://estimote.com";
connection.settings.eddystone.url.url().set(url, new SettingCallback<String>() {
  @Override
  public void onSuccess(String value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

####Eddystone Telemetry

boolean enable = true;
connection.settings.eddystone.tlm.enable().set(enable, new SettingCallback<Boolean>() {
  @Override
  public void onSuccess(Boolean value) {
    // Handle success here
  }

  @Override
  public void onFailure(DeviceConnectionException exception) {
    // Handle failure here
  }
});

Modifying transmit power:

int txPower = -8;
connection.settings.eddystone.tlm.transmitPower().set(txPower, new SettingCallback<Integer>() {...});

Modifying advertising interval:

int advertisingInterval = 1000;
connection.settings.eddystone.tlm.advertisingInterval(advertisingInterval, new SettingCallback<Integer>() {...});