Proxmox VE LXC Filesystem Trim

[MickLesk]

With traditional hard disk drives (HDDs or spinner disks), there isn't a significant performance penalty for leaving empty blocks or unused space on the disk. This is because HDDs use spinning magnetic platters and mechanical read/write heads to access data. Therefore, the physical location of data on the disk doesn't impact performance significantly, and there's no need to actively manage unused space to maintain performance.

However, solid-state drives (SSDs) operate differently. SSDs use NAND flash memory to store data, and they have a limited number of write cycles per cell. As data is written, erased, and rewritten to the SSD, performance can degrade over time due to the way NAND flash memory works. Specifically, write operations are faster on empty blocks than on blocks that have been previously written and need to be erased before new data can be written.

fstrim is a command used with SSDs to inform the drive which blocks of data are no longer considered in use by the filesystem so that the drive can internally erase them and prepare them for new data. This helps maintain consistent performance on SSDs over time and prevents degradation due to inefficient write operations.

Similarly, thin-provisioned storage technologies like LVM-Thin, Ceph, and qcow2 allocate storage space dynamically as needed. Without proper management, unused blocks within these storage systems can continue to occupy space, causing storage usage to grow unnecessarily.

Therefore, it's essential to periodically trim SSDs and manage unused space in thin-provisioned storage systems to optimize performance and prevent unnecessary consumption of storage resources.

VMs are configured to run fstrim automatically on a weekly basis, for LXC containers, it's necessary to perform fstrim manually or set up a separate automated process.

So, I created a script to run fstrim on all LXC containers (that are not selected to be skipped). This is designed to work with SSDs on ext4 filesystems only.

bash -c "$(wget -qLO - https://github.com/community-scripts/ProxmoxVE/raw/main/misc/fstrim.sh)"

Migrated from: tteck/Proxmox#2505

[vgdh]

why run trim on lxc? Isn't it better to run trim on the host?

[djismgaming]

How could we automate this script by having an option to run it without confirmation?

[Citroene]

This!

i want to run the script with cron

[towerhand]

I use:

0 1 * * 6 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin /bin/bash -c 'pct list | awk "/^[0-9]/ {print $1}" | while read ct; do pct fstrim $ct; done >>/var/log/fstrim-cron.log 2>/dev/null'

[djismgaming]

I use:

0 1 * * 6 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin /bin/bash -c 'pct list | awk "/^[0-9]/ {print $1}" | while read ct; do pct fstrim $ct; done >>/var/log/fstrim-cron.log 2>/dev/null'

Awesome! Gave me a great start.

I think your command is just missing a slash: ...{print \$1}... instead of ...{print $1}...

Full working command:

pct list | awk "/^[0-9]/ {print \$1}" | while read ct; do pct fstrim $ct; done >>/var/log/fstrim-cron.log 2>/dev/null

Full working cron entry (running at 1:00 AM every Saturday in this example):

0 1 * * 6 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin /bin/bash -c `pct list | awk "/^[0-9]/ {print \$1}" | while read ct; do pct fstrim $ct; done >>/var/log/fstrim-cron.log 2>/dev/null`

[Citroene]

Thx!

is there also a way to use the LXC clean script with cron?
bash -c "$(wget -qLO - https://github.com/community-scripts/ProxmoxVE/raw/main/misc/clean-lxcs.sh)"