Skip to content

Toolchain installation

Jump to bottom
Edgar K edited this page Feb 9, 2019 · 17 revisions

Setup environment

In order to use this repository, the user shall install the following resources and utilities.

Install toolchain prerequisities

Some of the requirements for installing and using this software are (for Ubuntu):

  • Update the system (optional step):
sudo apt-get update
sudo apt upgrade
  • Installation git:
sudo apt-get install git
  • Installation libusb:
sudo apt-get install libusb-1.0-0-dev

Install toolchain

Installation compiler and debbuger

ARM developer

The GNU Embedded Toolchain for ARM is a ready-to-use, open source suite of tools for C, C++ and Assembly programming targeting ARM Cortex-M and Cortex-R family of processors.

The PPA we want in this case is from the GCC ARM Embedded Maintainer’s team.

Linux (Ubuntu)
sudo add-apt-repository ppa:team-gcc-arm-embedded/ppa
sudo apt-get update
sudo apt-get install gcc-arm-embedded
Linux (Fedora)
sudo yum install arm-none-eabi-gcc-cs
sudo yum install arm-none-eabi-binutils-cs
sudo yum install arm-none-eabi-newlib
MacOS
brew tap ArmMbed/homebrew-formulae
brew install arm-none-eabi-gcc

If it installs correctly, doing autocomplete in the terminal like so:

arm-none (press tab twice)

You should see something similar like:

arm-none-eabi-addr2line   arm-none-eabi-gcc-ar      arm-none-eabi-nm
arm-none-eabi-ar          arm-none-eabi-gcc-nm      arm-none-eabi-objcopy
arm-none-eabi-as          arm-none-eabi-gcc-ranlib  arm-none-eabi-objdump
arm-none-eabi-c++         arm-none-eabi-gcov        arm-none-eabi-ranlib
arm-none-eabi-c++filt     arm-none-eabi-gcov-dump   arm-none-eabi-readelf
arm-none-eabi-cpp         arm-none-eabi-gcov-tool   arm-none-eabi-size
arm-none-eabi-elfedit     arm-none-eabi-gdb         arm-none-eabi-strings
arm-none-eabi-g++         arm-none-eabi-gprof       arm-none-eabi-strip
arm-none-eabi-gcc         arm-none-eabi-ld
arm-none-eabi-gcc-7.3.1   arm-none-eabi-ld.bfd

OpenOCD (optional)

OpenOCD is a free on chip debug solution for targets based on ARM. It is a server which opens a GDB remote target port and a Telnet port.

In order to install OpenOCD, the code necesary for instalation could be found in OpenOCD.

The following commands generate and install the program.

 ./configure [options]
 make
 sudo make install

Installation st-link (recommended)

Stlink package is the software for the ST-Link programmer that works with many ST boards. On the discovery boards, the programmer is embedded at the top. You just need to make sure you plug in your mini-USB cable into the center-most port that is labeled ST-Link.

Сlone the repository st-link:

git clone https://github.com/texane/stlink.git

Every thing can be built from the top of directory:

cd stlink
make
cd build/Release

To install it run the following command with root permission:

sudo make install

For some reason, the supplementary library might not be installed automatically, thus Linux users should move the library manually to the system directory.

sudo cp libstlink.so.1 /usr/lib/

In Fedora, st-link software can be installed from repository:

Linux (Fedora)

sudo yum install stlink
Clone this wiki locally