-
Notifications
You must be signed in to change notification settings - Fork 110
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
esp-csi/examples/esp-radar/console_test not working (AEGHB-619) #172
Comments
Does baud rate changing according to #151 help? |
Made sure the baud rate was matching. |
To better diagnose the issue, please monitor the ESP device using the command
Additionally, could you please provide detailed descriptions of your testing environment? Include the type of development kit you are using, the version of the IDF, and any other relevant information. This information will greatly assist us in diagnosing and addressing your issue more effectively. |
|
Hi @q936505350: Firstly, regarding the image you provided, it's possible that the issue stems from an incorrect baud rate setting and we can't get enough info starting from the secondary bootloader. To assist you more effectively, could you please provide more detailed information? Secondly, the esp_csi_tool is utilized in conjunction with the console_test program. Lastly, based on the information provided, your issue does not seem to be closely related to the existing discussions. It is recommended that you initiate a new issue for further discussion. |
Thank you for your reply, I have resolved the issue.
936505350
***@***.***
…------------------ 原始邮件 ------------------
发件人: "espressif/esp-csi" ***@***.***>;
发送时间: 2024年5月20日(星期一) 下午4:34
***@***.***>;
***@***.******@***.***>;
主题: Re: [espressif/esp-csi] esp-csi/examples/esp-radar/console_test not working (AEGHB-619) (Issue #172)
Hi @q936505350: Firstly, regarding the image you provided, it's possible that the issue stems from an incorrect baud rate setting and we can't get enough info starting from the secondary bootloader. To assist you more effectively, could you please provide more detailed information? Secondly, the esp_csi_tool is utilized in conjunction with the console_test program. Lastly, based on the information provided, your issue does not seem to be closely related to the existing discussions. It is recommended that you initiate a new issue for further discussion.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
@MacChu0315, thanks for the reply.
Trying the above two commands out provides csi data logs and the controller seems to be running the flashed code (the sound it generates is not so low). But the GUI doesn't display anything.. IDF vdersion: 5.0.2 OS: linux Examples to use: and visualize using: tried flashing csi_recv_router then console_test/tool/esp_csi_tool.py basically followed the READMEs in csi_recv_router (as I only have one esp32) and console_test. Also set the matching right baud rate. The aforementioned sound also stops when the GUI is instead opened. |
Hi @rav2n-dev, can you provide the output from running the following two lines of code?
|
Following the instructions doesn't give any waveform in the gui.
Please help as soon as possible, it is very urgent (for a humanitarian cause).
The text was updated successfully, but these errors were encountered: