Skip to content

Latest commit

 

History

History
412 lines (296 loc) · 44.6 KB

testing.md

File metadata and controls

412 lines (296 loc) · 44.6 KB

Testing in AMP HTML

This document provides details for testing and building your AMP code.

Contents

Testing commands

Before running these commands, make sure you have Node.js installed. For instructions, see the One-time setup section in the Quick Start guide.

Pro tip: To see a full listing of amp commands and their flags, run amp --help.

Command Description
amp Starts the dev server, lazily builds JS files and extensions when requested, and watches them for changes. Use this for development.
amp --extensions=amp-foo,amp-bar Same as amp. Pre-builds the listed extensions, and lazily builds other files when requested.
amp --extensions_from=examples/foo.amp.html Same as amp. Pre-builds the extensions in the given example file, and lazily builds other files when requested.
amp --minified Same as amp. Compiles and serves minified binaries. Can be used with --extensions and --extensions_from.
amp --version_override=<version_override> Runs "watch" and "serve". Overrides the version written to the AMP_CONFIG.
amp dist Builds minified AMP binaries and applies AMP_CONFIG to runtime files.
amp dist --watch Builds minified AMP binaries and watches them for changes.
amp dist --noconfig Builds minified AMP binaries without applying AMP_CONFIG to runtime files.
amp dist --extensions=amp-foo,amp-bar Builds minified AMP binaries, with only the listed extensions.
amp dist --extensions_from=examples/foo.amp.html Builds minified AMP binaries, with only extensions from the listed examples.
amp dist --noextensions Builds minified AMP binaries without building any extensions.
amp dist --core_runtime_only Builds minified AMP binaries for just the core runtime. Can be combined with --extensions and --extensions_from.
amp dist --fortesting Builds minified AMP binaries for local testing. (Allows use cases like ads, tweets, etc. to work with minified sources. Overrides TESTING_HOST if specified. Uses the production AMP_CONFIG by default.)
amp dist --fortesting --config=<config> Builds minified AMP binaries for local testing, with the specified AMP_CONFIG. config can be prod or canary. (Defaults to prod.)
amp dist --version_override=<version_override> Builds minified AMP binaries and overrides the version written to the AMP_CONFIG.
amp lint Validates JS files against the ESLint linter.
amp lint --watch Watches for changes in files, and validates against the ESLint linter.
amp lint --fix Fixes simple lint warnings/errors automatically.
amp lint --files=<files-path-glob> Lints just the files provided. Can be used with --fix.
amp lint --local_changes Lints just the files changed in the local branch. Can be used with --fix.
amp prettify Validates non-JS files using Prettier.
amp prettify --fix Fixes simple formatting errors automatically.
amp prettify --files=<files-path-glob> Checks just the files provided. Can be used with --fix.
amp prettify --local_changes Checks just the files changed in the local branch. Can be used with --fix.
amp build Builds unminified AMP binaries.
amp build --watch Builds unminified AMP binaries and watches them for changes.
amp build --extensions=amp-foo,amp-bar Builds unminified AMP binaries, with only the listed extensions.
amp build --extensions_from=examples/foo.amp.html Builds unminified AMP binaries, with only the extensions needed to load the listed examples.
amp build --noextensions Builds unminified AMP binaries with no extensions.
amp build --core_runtime_only Builds unminified AMP binaries for just the core runtime.
amp build --fortesting Builds unminified AMP binaries and sets the test field in AMP_CONFIG to true.
amp build --version_override=<version_override> Builds unminified AMP binaries with the specified version.
amp check-links --files=<files-path-glob> Reports dead links in .md files.
amp check-links --local_changes Reports dead links in .md files changed in the local branch.
amp clean Removes build output.
amp css Recompiles css to the build directory and builds the embedded css into js files for the AMP library.
amp compile-jison Compiles jison parsers for extensions to build directory.
amp pr-check Runs all the CircleCI checks locally.
amp pr-check --nobuild Runs all the CircleCI checks locally, but skips the amp build step.
amp pr-check --files=<test-files-path-glob> Runs all the CircleCI checks locally, and restricts tests to the files provided.
amp unit Runs the unit tests in Chrome (doesn't require the AMP library to be built).
amp unit --local_changes Runs the unit tests directly affected by the files changed in the local branch in Chrome.
amp integration Runs the integration tests in Chrome after building the unminified runtime with the prod version of AMP_CONFIG.
amp integration --minified Same as above, but builds the minified runtime.
amp integration --config=<config> Same as above, but config can be prod or canary. (Defaults to prod.)
amp integration --nobuild Same as above, but skips building the runtime.
amp [unit|integration] --verbose Runs tests in Chrome with logging enabled.
amp [unit|integration] --coverage Runs code coverage tests. After running, the report will be available at test/coverage/index.html
amp [unit|integration] --watch Watches for changes in files, runs corresponding test(s) in Chrome.
amp [unit|integration] --watch --verbose Same as watch, with logging enabled.
amp [unit|integration] --safari Runs tests in Safari.
amp [unit|integration] --firefox Runs tests in Firefox.
amp [unit|integration] --edge Runs tests in Edge.
amp [unit|integration] --files=<test-files-path-glob> Runs specific test files.
amp [unit|integration] --testnames Lists the name of each test being run, and prints a summary at the end.
amp serve Serves content from the repository root at http://localhost:8000/. Examples live in http://localhost:8000/examples/. Serves unminified binaries by default.
amp serve --minified Same as serve, but serves minified binaries.
amp serve --cdn Same as serve, but serves CDN binaries.
amp serve --rtv <rtv_number> Same as serve, but serves binaries with the given 15 digit RTV.
amp serve --esm Same as serve, but serves esm (module) binaries. Uses the new Typescript based transforms. Still under active development.
amp serve --quiet Same as serve, with logging silenced.
amp serve --port <port> Same as serve, but uses a port number other than the default of 8000.
amp storybook Serves Storybooks for isolated component testing.
amp storybook --storybook_env <storybook_env> Serves Storybook of a specific environment (amp, preact).
amp storybook --build [--storybook_env <storybook_env>] Builds one or more Storybooks into a static directory.
amp check-types Verifies that there are no errors associated with Closure typing. Run automatically upon push.
amp dep-check Runs a dependency check on each module. Run automatically upon push.
amp presubmit Run validation against files to check for forbidden and required terms. Run automatically upon push.
amp validator Builds and tests the AMP validator. Run automatically upon push.
amp ava Run node tests for tasks and offline/node code using ava.
amp todos:find-closed Find TODOs in code for issues that have been closed.
amp visual-diff Runs all visual diff tests on a headless instance of local Chrome after building the minified runtime with the prod version of AMP_CONFIG. Requires PERCY_TOKEN to be set as an environment variable or passed to the task with --percy_token.
amp visual-diff --config=<config> Same as above, but config can be prod or canary. (Defaults to prod.)
amp visual-diff --nobuild Same as above, but skips building the runtime.
amp visual-diff --chrome_debug --webserver_debug Same as above, with additional logging. Debug flags can be used independently.
amp visual-diff --grep=<regular-expression-pattern> Same as above, but executes only those tests whose name matches the regular expression pattern.
amp firebase Generates a folder firebase and copies over all files from examples and test/manual for firebase deployment.
amp firebase --file path/to/file Same as above, but copies over the file specified as firebase/index.html.
amp firebase --minified Same as amp firebase, but uses minified files of the form /dist/v0/amp-component-name.js instead of unminified files of the form /dist/v0/amp-component-name.max.js.
amp firebase --nobuild Same as amp firebase, but skips building the runtime.
amp e2e Runs all end-to-end tests on Chrome after building the unminified runtime with the prod version of AMP_CONFIG..
amp e2e --minified Same as above, but builds the minified runtime. .
amp e2e --config=<config> Same as above, but config can be prod or canary. (Defaults to prod.)
amp e2e --nobuild Same as above, but skips building the runtime.
amp e2e --files=<test-files-path-glob> Runs end-to-end tests from the specified files on the latest Chrome browser.
amp e2e --testnames Lists the name of each test being run, and prints a summary at the end.
amp e2e --engine=ENGINE Runs end-to-end tests with the given Web Driver engine. Allowed values are puppeteer and selenium.
amp e2e --headless Runs end-to-end tests in a headless browser instance.
amp e2e --watch Watches for changes in test files, runs tests.
amp check-sourcemaps Checks sourcemaps generated during minified compilation for correctness.

Pro tip: All the above commands can be run in debug mode using node --inspect. This will make the Chrome debugger stop at debugger; statements, after which local state can be inspected using dev tools.

For example, in order to debug amp serve, run the following command:

node --inspect $(which amp) serve

Manual testing

For manual testing build AMP and start the Node.js server by running amp.

Serve Mode

There are 5 serving modes:

  • DEFAULT mode serves unminified AMP. Use this during normal development by simply running amp.
  • MINIFIED mode serves minified AMP. This is closer to what is served in production on the stable channel. Serve this mode by running amp --minified.
  • CDN mode serves stable channel binaries. Local changes are not served in this mode. Serve CDN mode by running amp serve --cdn.
  • RTV mode serves the bundle from the given RTV number (a 15 digit number). E.g. 001907161745080. Serve RTV mode by running amp serve --rtv <rtv_number>
  • ESM mode serves the esm (module) binaries. First run amp dist --fortesting --esm and then serve esm mode by running amp serve --esm. This mode is new, and under active development.

To switch serving mode during runtime, go to http://localhost:8000/serve_mode=MODE and set MODE to one of the following values: default, compiled, cdn or <RTV_NUMBER>.

Examples

The content in the examples directory can be reached at: http://localhost:8000/examples/

Document proxy

AMP ships with a local proxy for testing production AMP documents with the local JS version.

For any public AMP document like: http://output.jsbin.com/pegizoq/quiet,

You can access it with the local JS by using the form in http://localhost:8000 or by accessing the proxy URL directly:

http://localhost:8000/proxy/output.jsbin.com/pegizoq/quiet.

Note: The local proxy will serve minified or unminified JS based on the current serve mode. When serve mode is cdn, the local proxy will serve remote JS. When accessing minified JS make sure you run amp dist with the --fortesting flag so that we do not strip out the localhost code paths. (We do some code elimination to trim down the file size for the file we deploy to production)

If the origin resource is on HTTPS, the URLs are http://localhost:8000/proxy/s/output.jsbin.com/pegizoq/quiet

A4A envelope (/a4a/, /a4a-3p/)

If you are working on AMPHTML ads, you can use the local A4A envelope for testing local and production AMP documents with the local JS version.

A4A can be run either of these two modes:

  1. Friendly iframe mode: http://localhost:8000/a4a/...
  2. 3p iframe mode: http://localhost:8000/a4a-3p/...

The following forms are supported:

When accessing minified JS make sure you run amp dist with the --fortesting flag so that we do not strip out the localhost code paths. (We do some code elimination to trim down the file size for the file we deploy to production)

If the origin resource is on HTTPS, the URLs are http://localhost:8000/a4a[-3p]/proxy/s/output.jsbin.com/pegizoq/quiet

Notice that all documents are assumed to have a "fake" signature. Thus, this functionality is only available in the localDev mode.

Additionally, the following query parameters can be provided:

  • width - the width of the amp-ad (default "300")
  • height - the height of the amp-ad (default "250")
  • offset - the offset to push the amp-ad down the page (default "0px"). Can be used to push the Ad out of the viewport, e.g. using offset=150vh.

In-a-box envelope (/inabox/)

If you are working on AMP In-a-box Ads, you can use the local in-a-box envelope for testing local and production AMP documents with the local JS version.

The following forms are supported:

Additionally, the following query parameters can be provided:

  • width - the width of the iframe (default "300")
  • height - the height of the iframe (default "250")
  • offset - the offset to push the iframe down the page (default "0px"). Can be used to push the Ad out of the viewport, e.g. using offset=150vh.

Chrome extension

For testing documents on arbitrary URLs with your current local version of the AMP runtime we created a Chrome extension.

Visual Diff Tests

In addition to building the AMP runtime and running amp [unit|integration], the automatic test run on CircleCI includes a set of visual diff tests to make sure a new commit to main does not result in unintended changes to how pages are rendered. The tests load a few well-known pages in a browser and compare the results with known good versions of the same pages.

The technology stack used is:

  • Percy, a visual regression testing service for webpages
  • Puppeteer, a driver capable of loading webpages for diffing
  • Percy-Puppeteer, a framework that integrates Puppeteer with Percy
  • Headless Chrome, the Chrome/Chromium browser in headless mode

The ampproject/amphtml repository on GitHub is linked to the Percy project of the same name. You will see a check called percy/amphtml on your PR. If your PR results in visual diff(s), clicking on the details link will show you the snapshots with the diffs highlighted.

Failing Tests

When a test run fails due to visual diffs being present, click the details link next to percy/amphtml in your PR and examine the results. By default, Percy highlights the changes between snapshots in red. Clicking on the new snapshot will show it in its raw form. If the diffs indicate a problem that is likely to be due to your PR, you can try running the visual diffs locally in order to debug (see section below). However, if you are sure that the problem is not due to your PR, you may click the green Approve button on Percy to approve the snapshots and unblock your PR from being merged.

Flaky Tests

If a Percy test flakes and you would like to trigger a rerun, you can't do that from within Percy. Instead, from your PR on GitHub, click on the details link next to CircleCI PR Check and then click on Visual Diff Tests to load the CircleCI run for your PR. On the job page, click the Rerun workflow from start button to rerun just that job, which will generate a fresh visual diff build on Percy.

How Are Tests Executed

Visual diff tests are defined in the visual-tests.jsonc, see file for the configurations of each test. When running, the visual diff test runner does the following for each test case:

  • Navgates to the defined page using a headless Chrome browser
  • Waits for the page to finish loading, both by verifying idle network connections and lack of loader animations
  • If defined, waits until the appropriate CSS selectors appear/disappear from the page
  • If defined, waits an arbitrary amount of time (e.g., for components that have time-delayed mutations)
  • If defined, executes any custom interaction test code
  • Uploads a snapshot of the page's DOM (converted to an HTML string) to the Percy service

When all snapshots finish uploading, Percy will process the visual diffs and report back to GitHub as a pull request status. Percy renders the snapshots in their own browsers and take a screenshot. If the new screenshot differs from the previously approved screenshot you will get a visual highlighting of where that difference lies.

Percy DOES NOT by default run JavaScript, so the same DOM snapshot will be used in displaying mobile and desktop versions of the page. This means that if your page looks different between these two device types, it should be able to do that using CSS only.

Adding and Modifying Visual Diff Tests

See Adding and Modifying Visual Diff Tests.

Isolated Component Testing

To speed up development and testing of components, it is advised to use Storybook. This allows you to write "stories", which are renderable test scenarios.

Stories can show configuration controls for manual testing of component parameters. They also provide tools to audit accessibility, test layouts that change according to viewport size, among other features.

📖 Storybook documentation: What's a Story?

Launching Storybook

You may launch the preact Storybook by running:

amp storybook

You may launch a specific environment by providing --storybook_env:

  • preact

    amp storybook --storybook_env=preact

  • react

    amp storybook --storybook_env=react

    Launching the react environment requires component bundles. You should ensure that they're present in extensions/**/dist directories beforehand, by running amp build --extensions=... for all Bento components.

  • amp

    amp storybook --storybook_env=amp

    Launching the amp environment also initiates the build-and-serve task that's normally launched using the amp command. This provides an additional server on localhost:8000.

Writing test scenarios

Test scenarios (stories) are located inside a component's directory. Their filename suffix determines whether they run on the amp environment, or on the preact and react environments:

  • preact Stories end with .js:

    extensions/amp-example/0.1/storybook/Basic.js

  • react Stories use the same files as preact.

  • amp Stories end with .amp.js:

    extensions/amp-example/0.1/storybook/Basic.amp.js

Read more about Writing Stories in the official Storybook documentation. Make sure to also follow our own Style Recommendations

Testing on devices

Testing with ngrok

It's much faster to debug with local build (amp + http://localhost:8000/). In Chrome you can use DevTools port forwarding. However, iOS Safari does not give a similar option. Instead, you can use ngrok. Just download the ngrok binary for your platform and run it like this:

ngrok http 8000

Once started, the ngrok will print URLs for both http and https. E.g. http://73774d8c.ngrok.io/ and https://73774d8c.ngrok.io/. These URLs can be used to debug on iOS and elsewhere.

Testing with Firebase

For deploying and testing local AMP builds on Firebase, install firebase and initialize firebase within this directory* (a firebase folder can be generated with the command, amp firebase).

npm install -g firebase-tools
firebase login
firebase init
amp firebase
firebase deploy
  • When initializing firebase within the directory via firebase init, make sure to select the following options when asked:
  • "Which Firebase CLI features do you want to setup for this folder?" select Hosting: Configure and deploy Firebase Hosting sites.
  • "What do you want to use as your public directory?" enter firebase.
  • "Select a default Firebase project for this directory:" select your project name if it's already created, otherwise choose [don't setup a new project] and add one later.
    • Note: If you haven't already, you will have to create a project via the Firebase Console after you are done initializing and before you deploy. Once you create the project, you can make it active in your CLI with firebase use your-project-name or give it an alias by selecting your project after running firebase use --add.
  • "Configure as a single-page app (rewrite all urls to /index.html)?" select n.

amp firebase will generate a firebase folder and copy over all files from dist, examples and test/manual. It will rewrite all urls in the copied files to point to the local versions of AMP (i.e. the ones copied from dist to firebase/dist). When you initialize firebase, you should set the firebase public directory to firebase. This way firebase deploy will just directly copy and deploy the contents of the generated firebase folder. As an example, your firebase.json file can look something like this:

{
  "hosting": {
    "public": "firebase",
    "ignore": ["firebase.json", "**/.*", "**/node_modules/**"]
  }
}

If you are only testing a single file, you can use amp firebase --file=path/to/my/file.amp.html to avoid copying over all of test/manual and examples. It will copy over the specified file to firebase/index.html, which simplifies debugging.

After deploying, you can access your project publically at its hosting URL https://your-project-name.firebaseapp.com.

Additionally, you can create multiple projects and switch between them in the CLI using firebase use your-project-name.

Testing Ads

Testing ads in deployed demos requires allowlisting of 3p urls. You can do this by adding your intended deployment hostname as an environemnt variable AMP_TESTING_HOST and using the fortesting flag. For example:

export AMP_TESTING_HOST="my-project.firebaseapp.com"
amp firebase --fortesting
firebase deploy

This will write "my-project.firebaseapp.com" as a third party url to relevant attributes in AMP_CONFIG, which is prepended to amp.js and integration.js files in the firebase folder. If you're curious about how this is done, feel free to inspect build-system/tasks/firebase.js.

End-to-End Tests

You can run and create E2E tests locally during development. Currently tests only run on Chrome, but support for additional browsers is underway. These tests have not been added to our CI build yet - but they will be added soon.

Run all tests with:

amp e2e

The task will kick off amp build and then amp serve before running the tests. To skip building the runtime, use --nobuild.

Consult the E2E testing documentation to learn how to create your own end-to-end tests.

Performance Testing Node Build Tools

You can create flamecharts for any node process used by the build system by leveraging 0x.

Here's an example for amp dist:

npx 0x -o node_modules/.bin/amp dist

Important to note is 0x will automatically create a flamechart and a serving folder locally within the repository, please don't add them to PRs!