arduino-capacitive-soil-moisture-sensor/

[utterances-bot]

Arduino - Capacitive Soil Moisture Sensor

https://www.gabrielcsapo.com/arduino-capacitive-soil-moisture-sensor/

[severin-bruhat]

Hi, thanks for this article, the calibration sounds really straightforward. However when I do that with a couple of v2.0 moisture sensors, I get random inconsistent wet and dry numbers, so it's impossible for me to calibrate. For instance I would get dry = 61 and wet = 43, but after a few second, my sensor, in the water would indicate 63. I have no idea what's going on. Any idea? Thank you

[gabrielcsapo]

hey @severin-bruhat, sadly it is one of those things that sometimes you might get a bad sensor.

Can you post the sensor you are using?

[severin-bruhat]

Hey, thanks for replying to me. I bought those ones: https://www.amazon.co.uk/gp/product/B09C616HQH/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 it says v1.2, but I received v2.0 version. I've got 6 of them, and they all return the same values. See an example: Plant 1 - Moisture Level: 65.00 -> dry Plant 1 - Moisture Level: 65.00 -> dry Plant 1 - Moisture Level: 66.00 -> dry Plant 1 - Moisture Level: 67.00 -> dry Plant 1 - Moisture Level: 73.00 -> dry Plant 1 - Moisture Level: 74.00 -> dry Plant 1 - Moisture Level: 74.00 -> wet Plant 1 - Moisture Level: 72.00 -> wet Plant 1 - Moisture Level: 73.00 -> wet Plant 1 - Moisture Level: 64.00 -> wet Plant 1 - Moisture Level: 61.00 -> wet Plant 1 - Moisture Level: 61.00 -> wet Plant 1 - Moisture Level: 60.00 -> wet Plant 1 - Moisture Level: 75.00 -> wet Plant 1 - Moisture Level: 66.00 -> wet Plant 1 - Moisture Level: 65.00 -> wet The code I use: void loop() { Serial.print("Plant 1 - Moisture Level: "); sensor1Value = analogRead(Pin1); Serial.println(sensor1Value); delay(5000); } This makes no sense to me.

…

On Wed, May 25, 2022 at 12:44 AM Gabriel Csapo ***@***.***> wrote: hey @severin-bruhat <https://github.com/severin-bruhat>, sadly it is one of those things that sometimes you might get a bad sensor. Can you post the sensor you are using? — Reply to this email directly, view it on GitHub <#9 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACJFF6TG3CJWYMVIUP67JP3VLVSW3ANCNFSM5W22J54Q> . You are receiving this because you were mentioned.Message ID: ***@***.***>

-- Séverin BRUHAT