From 4ec2fd9c3c68163a358937498b523292c3d38465 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-No=C3=ABl=20Avila?= Date: Sun, 4 Aug 2024 20:33:50 +0200 Subject: [PATCH] doc: git-diff: apply format changes to config part MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit By the way, we also change the sentences where git-diff would refer to itself, so that no link is created in the HTML output. Signed-off-by: Jean-Noël Avila --- Documentation/config/diff.txt | 204 ++++++++++++++++++---------------- 1 file changed, 111 insertions(+), 93 deletions(-) diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index 190bda17e51c57..45f3fe855c5bb4 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -1,18 +1,25 @@ -diff.autoRefreshIndex:: - When using 'git diff' to compare with work tree +`diff.autoRefreshIndex`:: + When using `git diff` to compare with work tree files, do not consider stat-only changes as changed. Instead, silently run `git update-index --refresh` to update the cached stat information for paths whose contents in the work tree match the contents in the - index. This option defaults to true. Note that this - affects only 'git diff' Porcelain, and not lower level - 'diff' commands such as 'git diff-files'. + index. This option defaults to `true`. Note that this + affects only `git diff` Porcelain, and not lower level + `diff` commands such as `git diff-files`. -diff.dirstat:: +`diff.dirstat`:: +ifdef::git-diff[] + A comma separated list of `--dirstat` parameters specifying the + default behavior of the `--dirstat` option to `git diff` and friends. +endif::git-diff[] +ifndef::git-diff[] A comma separated list of `--dirstat` parameters specifying the default behavior of the `--dirstat` option to linkgit:git-diff[1] - and friends. The defaults can be overridden on the command line - (using `--dirstat=`). The fallback defaults + and friends. +endif::git-diff[] + The defaults can be overridden on the command line + (using `--dirstat=,...`). The fallback defaults (when not changed by `diff.dirstat`) are `changes,noncumulative,3`. The following parameters are available: + @@ -41,7 +48,7 @@ diff.dirstat:: Note that when using `cumulative`, the sum of the percentages reported may exceed 100%. The default (non-cumulative) behavior can be specified with the `noncumulative` parameter. -;; +__;; An integer parameter specifies a cut-off percent (3% by default). Directories contributing less than this percentage of the changes are not shown in the output. @@ -52,58 +59,58 @@ directories with less than 10% of the total amount of changed files, and accumulating child directory counts in the parent directories: `files,10,cumulative`. -diff.statNameWidth:: - Limit the width of the filename part in --stat output. If set, applies - to all commands generating --stat output except format-patch. +`diff.statNameWidth`:: + Limit the width of the filename part in `--stat` output. If set, applies + to all commands generating `--stat` output except `format-patch`. -diff.statGraphWidth:: - Limit the width of the graph part in --stat output. If set, applies - to all commands generating --stat output except format-patch. +`diff.statGraphWidth`:: + Limit the width of the graph part in `--stat` output. If set, applies + to all commands generating `--stat` output except `format-patch`. -diff.context:: - Generate diffs with lines of context instead of the default - of 3. This value is overridden by the -U option. +`diff.context`:: + Generate diffs with __ lines of context instead of the default + of 3. This value is overridden by the `-U` option. -diff.interHunkContext:: +`diff.interHunkContext`:: Show the context between diff hunks, up to the specified number of lines, thereby fusing the hunks that are close to each other. This value serves as the default for the `--inter-hunk-context` command line option. -diff.external:: +`diff.external`:: If this config variable is set, diff generation is not performed using the internal diff machinery, but using the - given command. Can be overridden with the `GIT_EXTERNAL_DIFF' + given command. Can be overridden with the `GIT_EXTERNAL_DIFF` environment variable. The command is called with parameters as described under "git Diffs" in linkgit:git[1]. Note: if you want to use an external diff program only on a subset of your files, you might want to use linkgit:gitattributes[5] instead. -diff.trustExitCode:: - If this boolean value is set to true then the +`diff.trustExitCode`:: + If this boolean value is set to `true` then the `diff.external` command is expected to return exit code 0 if it considers the input files to be equal or 1 if it - considers them to be different, like `diff(1)`. - If it is set to false, which is the default, then the command - is expected to return exit code 0 regardless of equality. + considers them to be different, like `diff`(1). + If it is set to `false`, which is the default, then the command + is expected to return exit code `0` regardless of equality. Any other exit code causes Git to report a fatal error. -diff.ignoreSubmodules:: - Sets the default value of --ignore-submodules. Note that this - affects only 'git diff' Porcelain, and not lower level 'diff' - commands such as 'git diff-files'. 'git checkout' - and 'git switch' also honor +`diff.ignoreSubmodules`:: + Sets the default value of `--ignore-submodules`. Note that this + affects only `git diff` Porcelain, and not lower level `diff` + commands such as `git diff-files`. `git checkout` + and `git switch` also honor this setting when reporting uncommitted changes. Setting it to - 'all' disables the submodule summary normally shown by 'git commit' - and 'git status' when `status.submoduleSummary` is set unless it is - overridden by using the --ignore-submodules command-line option. - The 'git submodule' commands are not affected by this setting. + `all` disables the submodule summary normally shown by `git commit` + and `git status` when `status.submoduleSummary` is set unless it is + overridden by using the `--ignore-submodules` command-line option. + The `git submodule` commands are not affected by this setting. By default this is set to untracked so that any untracked submodules are ignored. -diff.mnemonicPrefix:: - If set, 'git diff' uses a prefix pair that is different from the - standard "a/" and "b/" depending on what is being compared. When +`diff.mnemonicPrefix`:: + If set, `git diff` uses a prefix pair that is different from the + standard `a/` and `b/` depending on what is being compared. When this configuration is in effect, reverse diff output also swaps the order of the prefixes: `git diff`;; @@ -112,111 +119,117 @@ diff.mnemonicPrefix:: compares a (c)ommit and the (w)ork tree; `git diff --cached`;; compares a (c)ommit and the (i)ndex; -`git diff HEAD:file1 file2`;; +`git diff HEAD: `;; compares an (o)bject and a (w)ork tree entity; -`git diff --no-index a b`;; - compares two non-git things (1) and (2). +`git diff --no-index `;; + compares two non-git things __ and __. -diff.noPrefix:: - If set, 'git diff' does not show any source or destination prefix. +`diff.noPrefix`:: + If set, `git diff` does not show any source or destination prefix. -diff.srcPrefix:: - If set, 'git diff' uses this source prefix. Defaults to "a/". +`diff.srcPrefix`:: + If set, `git diff` uses this source prefix. Defaults to `a/`. -diff.dstPrefix:: - If set, 'git diff' uses this destination prefix. Defaults to "b/". +`diff.dstPrefix`:: + If set, `git diff` uses this destination prefix. Defaults to `b/`. -diff.relative:: - If set to 'true', 'git diff' does not show changes outside of the directory +`diff.relative`:: + If set to `true`, `git diff` does not show changes outside of the directory and show pathnames relative to the current directory. -diff.orderFile:: +`diff.orderFile`:: File indicating how to order files within a diff. - See the '-O' option to linkgit:git-diff[1] for details. +ifdef::git-diff[] + See the `-O` option for details. +endif::git-diff[] +ifndef::git-diff[] + See the `-O` option to linkgit:git-diff[1] for details. +endif::git-diff[] If `diff.orderFile` is a relative pathname, it is treated as relative to the top of the working tree. -diff.renameLimit:: +`diff.renameLimit`:: The number of files to consider in the exhaustive portion of - copy/rename detection; equivalent to the 'git diff' option + copy/rename detection; equivalent to the `git diff` option `-l`. If not set, the default value is currently 1000. This setting has no effect if rename detection is turned off. -diff.renames:: - Whether and how Git detects renames. If set to "false", - rename detection is disabled. If set to "true", basic rename - detection is enabled. If set to "copies" or "copy", Git will - detect copies, as well. Defaults to true. Note that this - affects only 'git diff' Porcelain like linkgit:git-diff[1] and +`diff.renames`:: + Whether and how Git detects renames. If set to `false`, + rename detection is disabled. If set to `true`, basic rename + detection is enabled. If set to `copies` or `copy`, Git will + detect copies, as well. Defaults to `true`. Note that this + affects only `git diff` Porcelain like linkgit:git-diff[1] and linkgit:git-log[1], and not lower level commands such as linkgit:git-diff-files[1]. -diff.suppressBlankEmpty:: +`diff.suppressBlankEmpty`:: A boolean to inhibit the standard behavior of printing a space - before each empty output line. Defaults to false. + before each empty output line. Defaults to `false`. -diff.submodule:: +`diff.submodule`:: Specify the format in which differences in submodules are - shown. The "short" format just shows the names of the commits - at the beginning and end of the range. The "log" format lists + shown. The `short` format just shows the names of the commits + at the beginning and end of the range. The `log` format lists the commits in the range like linkgit:git-submodule[1] `summary` - does. The "diff" format shows an inline diff of the changed - contents of the submodule. Defaults to "short". + does. The `diff` format shows an inline diff of the changed + contents of the submodule. Defaults to `short`. -diff.wordRegex:: +`diff.wordRegex`:: A POSIX Extended Regular Expression used to determine what is a "word" when performing word-by-word difference calculations. Character sequences that match the regular expression are "words", all other characters are *ignorable* whitespace. -diff..command:: +`diff..command`:: The custom diff driver command. See linkgit:gitattributes[5] for details. -diff..trustExitCode:: - If this boolean value is set to true then the +`diff..trustExitCode`:: + If this boolean value is set to `true` then the `diff..command` command is expected to return exit code 0 if it considers the input files to be equal or 1 if it - considers them to be different, like `diff(1)`. - If it is set to false, which is the default, then the command + considers them to be different, like `diff`(1). + If it is set to `false`, which is the default, then the command is expected to return exit code 0 regardless of equality. Any other exit code causes Git to report a fatal error. -diff..xfuncname:: +`diff..xfuncname`:: The regular expression that the diff driver should use to recognize the hunk header. A built-in pattern may also be used. See linkgit:gitattributes[5] for details. -diff..binary:: - Set this option to true to make the diff driver treat files as +`diff..binary`:: + Set this option to `true` to make the diff driver treat files as binary. See linkgit:gitattributes[5] for details. -diff..textconv:: +`diff..textconv`:: The command that the diff driver should call to generate the text-converted version of a file. The result of the conversion is used to generate a human-readable diff. See linkgit:gitattributes[5] for details. -diff..wordRegex:: +`diff..wordRegex`:: The regular expression that the diff driver should use to split words in a line. See linkgit:gitattributes[5] for details. -diff..cachetextconv:: - Set this option to true to make the diff driver cache the text +`diff..cachetextconv`:: + Set this option to `true` to make the diff driver cache the text conversion outputs. See linkgit:gitattributes[5] for details. include::../mergetools-diff.txt[] -diff.indentHeuristic:: +`diff.indentHeuristic`:: Set this option to `false` to disable the default heuristics that shift diff hunk boundaries to make patches easier to read. -diff.algorithm:: +`diff.algorithm`:: Choose a diff algorithm. The variants are as follows: + -- -`default`, `myers`;; +`default`;; +`myers`;; The basic greedy diff algorithm. Currently, this is the default. `minimal`;; Spend extra time to make sure the smallest possible diff is @@ -229,7 +242,7 @@ diff.algorithm:: -- + -diff.wsErrorHighlight:: +`diff.wsErrorHighlight`:: Highlight whitespace errors in the `context`, `old` or `new` lines of the diff. Multiple values are separated by comma, `none` resets previous values, `default` reset the list to @@ -238,14 +251,19 @@ diff.wsErrorHighlight:: The command line option `--ws-error-highlight=` overrides this setting. -diff.colorMoved:: - If set to either a valid `` or a true value, moved lines - in a diff are colored differently, for details of valid modes - see '--color-moved' in linkgit:git-diff[1]. If simply set to - true the default color mode will be used. When set to false, - moved lines are not colored. - -diff.colorMovedWS:: +`diff.colorMoved`:: + If set to either a valid __ or a `true` value, moved lines + in a diff are colored differently. +ifdef::git-diff[] + For details of valid modes see `--color-moved`. +endif::git-diff[] +ifndef::git-diff[] + For details of valid modes see `--color-moved` in linkgit:git-diff[1]. +endif::git-diff[] + If simply set to `true` the default color mode will be used. When + set to `false`, moved lines are not colored. + +`diff.colorMovedWS`:: When moved lines are colored using e.g. the `diff.colorMoved` setting, - this option controls the `` how spaces are treated. - For details of valid modes see '--color-moved-ws' in linkgit:git-diff[1]. + this option controls the mode how spaces are treated. + For details of valid modes see `--color-moved-ws` in linkgit:git-diff[1].