Now that your YunoHost install medium, you can start with the installation.
If you want the network configuration to be set up automatically, you have to plug your server with an Ethernet cable right behind your main router.
The wireless connections are not supported yet, and if you use intermediate routers, the network ports opening will not be automatic: Your server will not be accessible externally.
Boot up your server with the USB key or a CD-ROM inserted, and select it as bootable device by pressing one of the following keys (hardware specific):
<ESC>, <F8>, <F10>, <F11>, <F12> or <SUPPR>
You should see a screen like this:
-
Select
Graphical install -
Select your language, your location and your keyboard layout
-
If a partitioning screen appears, confirm.
Caution: This will totally erase the data on your hard drive -
Let the installer do the rest, it will download required packages and install them.
If it fails, you probably have an Internet connection issue.
Check that your computer is physically connected and retry.
- It should reboot automatically.
Once booted, your computer should display a screen like this:
You can proceed to post-installation right away, or access the IP address shown on this screen from another computer's web browser (usually http://192.168.x.x)
If you encounter this kind of error, click on "Proceed" or "Add an exception".
This means that you have to trust the certificate which secures your server's connections.
Since this is your server, you can bypass it serenely here :-)
