| description |
|---|
GoPro cameras are supported in Gyroflow and are proven to deliver great video and stabilization quality. |
| Model | Gyro data | Lens profile | Synchronization | Remarks |
|---|---|---|---|---|
| Hero 4 or older | ❌ | ❌ | ❌ | |
| Hero 5 Black Hero 5 Session | ✅ | ✅ Official | ❗Needed | ❌ Bad on FPV drone 🚧 Superview |
| Hero 6 Black | ✅ | ✅ Official | ❗Needed | Firmware v1.6 recommended. 🚧 Superview |
| Hero 7 White Hero 7 Silver | ❌ | ❌ | ❌ | |
| Hero 7 Black | ✅ | ✅ Official | ❗Needed | ❌ Bad on FPV drone ❌ Hypersmooth 🚧 Superview |
| Hero 8 Black Hero 9 Black Hero 10 Black | ✅ | ✅ Official | ✅ Not needed | ✅ Hypersmooth 🚧 Superview |
| Hero 11 Black Hero 11 Mini Hero 12 Black Hero 13 Black | ✅ | ✅ Official | ✅ Not needed | ✅ Autoboost |
All GoPros until 11 use a 4:3 sensor, and Hero 11 uses 8:7 sensor. For Gyroflow stabilization, it's best to capture full sensor information, thus 4:3 or 8:7. However, these modes have less frame rate options than 16:9 resolutions, so if you want to shoot at maximum fps, it's better to choose 16:9 mode. Otherwise choose 4:3 or 8:7.
Gyroflow will output 16:9 aspect ratio by default after stabilization. This can be changed to anything you like in Export settings.
All lens modes are supported, but it's best to choose Wide.
Superview and Hyperview modes are supported, but not recommended. They capture full sensor information (4:3 and 8:7 respectively) and digitally stretch that video to 16:9 in camera, in a non-linear way (center is less stretched and sides are more stretched).
These modes use proprietary stretching equation which is not exactly mapped in Gyroflow, so stabilization will not be as accurate in these modes.
By default, GoPro files are limited to 4 GB in size. This can be increased by using GoPro Labs firmware and enabling the Large chapters feature.
If you already have your recording split at 4 GB file size limit, you can merge them losslessly in Gyroflow. If you open the first file, Gyroflow should detect the sequence automatically and ask you to merge. Otherwise you can just drag & drop all your files in the sequence to Gyroflow to merge.
You can find more information on the 🎞 File joiner page.
Since Hero 8, in-camera stabilization (Hypersmooth) can be enabled and is supported in Gyroflow.
All previous models need to have all internal stabilization (EIS) disabled during recording.
You should avoid motion blur when recording, read more why in the 📸 Common filming tips and issues.
For drone footage, the gyro data from the Hero 5 and 7 is unusable, due to bad noise filtering and aliasing. For this reason, Hero 5 Session, Hero 5 Black and Hero 7 are not recommended for cinematic FPV footage. One workaround is to use external gyro logging, for instance using the drone blackbox. Another workaround is the use of vibration-dampening mount, which can be a hassle compared to other GoPros.
Some users have reported that using intense low pass filtering of the gyro data (e.g. cutoff of 4 Hz or less) can yield acceptable results for some drone footage. This cannot correct for e.g. higher frequency propwash oscillations or vibrations, but can smooth out the general movement.
In general try to avoid these cameras if possible. If you want a budget-friendly camera, the Hero 6 Black is an great choice and doesn't have these issues.
{% content-ref url="../../advanced-usage/using-external-gyro-source/action-camera-as-a-logger.md" %} action-camera-as-a-logger.md {% endcontent-ref %}