German translation

[robgru]

Hello,
I have created a German translation for this, if you are interested.

filename: de-DE.h

`/*

*/

//Main Menu
const char txt_control[] PROGMEM = "Klimaanlage bedienen";
const char txt_setup[] PROGMEM = "Einstellungen";
const char txt_status[] PROGMEM = "Status";
const char txt_firmware_upgrade[] PROGMEM = "Firmware Upgrade";
const char txt_reboot[] PROGMEM = "Neustart";

//Setup Menu
const char txt_MQTT[] PROGMEM = "MQTT";
const char txt_WIFI[] PROGMEM = "WLAN";
const char txt_unit[] PROGMEM = "Einheiten";
const char txt_others[] PROGMEM = "weiteres";
const char txt_reset[] PROGMEM = "Einstellungen zurücksetzen";
const char txt_reset_confirm[] PROGMEM = "Willst du wirklich alle Einstellungen zurücksetzen?";

//Buttons
const char txt_back[] PROGMEM = "zurück";
const char txt_save[] PROGMEM = "speichern & neustart";
const char txt_logout[] PROGMEM = "ABMELDEN";
const char txt_upgrade[] PROGMEM = "Upgrade starten";
const char txt_login[] PROGMEM = "ANMELDEN";

//Form choices
const char txt_f_on[] PROGMEM = "EIN";
const char txt_f_off[] PROGMEM = "AUS";
const char txt_f_auto[] PROGMEM = "AUTO";
const char txt_f_heat[] PROGMEM = "HEIZEN";
const char txt_f_dry[] PROGMEM = "TROCKNEN";
const char txt_f_cool[] PROGMEM = "KÜHLEN";
const char txt_f_fan[] PROGMEM = "Lüfter";
const char txt_f_quiet[] PROGMEM = "LEISE";
const char txt_f_speed[] PROGMEM = "Geschwindigkeit";
const char txt_f_swing[] PROGMEM = "SCHWINGEN";
const char txt_f_pos[] PROGMEM = "POSITION";
const char txt_f_celsius[] PROGMEM = "Celsius";
const char txt_f_fh[] PROGMEM = "Fahrenheit";
const char txt_f_allmodes[] PROGMEM = "jeder Modus";
const char txt_f_noheat[] PROGMEM = "jeder Modus, außer heizen";

//Page Reboot, save & Resseting
const char txt_m_reboot[] PROGMEM = "Neustart... Aktualisierung in";
const char txt_m_reset[] PROGMEM = "Zurücksetzen... Verbinde mit SSID";
const char txt_m_save[] PROGMEM = "Einstellungen speichern und neustart... Aktualisierung in";

//Page MQTT
const char txt_mqtt_title[] PROGMEM = "MQTT Parameter";
const char txt_mqtt_fn[] PROGMEM = "Anzeigename";
const char txt_mqtt_host[] PROGMEM = "Host";
const char txt_mqtt_port[] PROGMEM = "Port (default 1883)";
const char txt_mqtt_user[] PROGMEM = "Benutzername";
const char txt_mqtt_password[] PROGMEM = "Passwort";
const char txt_mqtt_topic[] PROGMEM = "Topic";

//Page Others
const char txt_others_title[] PROGMEM = "Weitere Parameter";
const char txt_others_haauto[] PROGMEM = "HA Autodiscovery";
const char txt_others_hatopic[] PROGMEM = "HA Autodiscovery topic";
const char txt_others_debug[] PROGMEM = "Debug";

//Page Status
const char txt_status_title[] PROGMEM = "Status";
const char txt_status_hvac[] PROGMEM = "HVAC Status";
const char txt_retries_hvac[] PROGMEM = "HVAC Connection Retries";
const char txt_status_mqtt[] PROGMEM = "MQTT Status";
const char txt_status_wifi[] PROGMEM = "WLAN RSSI";
const char txt_status_connect[] PROGMEM = "CONNECTED";
const char txt_status_disconnect[] PROGMEM = "DISCONNECTED";

//Page WIFI
const char txt_wifi_title[] PROGMEM = "WLAN Parameter";
const char txt_wifi_hostname[] PROGMEM = "Hostname";
const char txt_wifi_SSID[] PROGMEM = "SSID";
const char txt_wifi_psk[] PROGMEM = "PSK";
const char txt_wifi_otap[] PROGMEM = "OTA Passwort";

//Page Control
const char txt_ctrl_title[] PROGMEM = "Kontrolleinheit";
const char txt_ctrl_temp[] PROGMEM = "Temperatur";
const char txt_ctrl_power[] PROGMEM = "Power";
const char txt_ctrl_mode[] PROGMEM = "Modus";
const char txt_ctrl_fan[] PROGMEM = "Lüfter";
const char txt_ctrl_vane[] PROGMEM = "Leitschaufel";
const char txt_ctrl_wvane[] PROGMEM = "breite Leitschaufel";
const char txt_ctrl_ctemp[] PROGMEM = "Raumtemperatur";

//Page Unit
const char txt_unit_title[] PROGMEM = "Unit configuration";
const char txt_unit_temp[] PROGMEM = "Temperatureinheit";
const char txt_unit_maxtemp[] PROGMEM = "max. Temperatur";
const char txt_unit_mintemp[] PROGMEM = "min. Temperatur";
const char txt_unit_steptemp[] PROGMEM = "Temperaturschritte";
const char txt_unit_modes[] PROGMEM = "unterstützter Modus";
const char txt_unit_password[] PROGMEM = "Web Passwort";

//Page Login
const char txt_login_title[] PROGMEM = "Authentifizierung";
const char txt_login_password[] PROGMEM = "Passwort";
const char txt_login_sucess[] PROGMEM = "Anmeldung erfolgreich, du wirst gleich weitergeleitet.";
const char txt_login_fail[] PROGMEM = "Falscher/s Benutzername/Passwort! Erneut versuchen.";

//Page Upgrade
const char txt_upgrade_title[] PROGMEM = "Upgrade";
const char txt_upgrade_info[] PROGMEM = "Firmware OTA upgrade, über .bin Datei upload";
const char txt_upgrade_start[] PROGMEM = "Upload gestartet";

//Page Upload
const char txt_upload_nofile[] PROGMEM = "keine Datei ausgewählt";
const char txt_upload_filetoolarge[] PROGMEM = "Datei ist größer als der verfügbare Speicher";
const char txt_upload_fileheader[] PROGMEM = "File magic header fängt nicht mit 0xE9 an";
const char txt_upload_flashsize[] PROGMEM = "Datei-Flash-Größe ist größer als Geräte-Flash-Größe";
const char txt_upload_buffer[] PROGMEM = "Datei-Upload-Puffer stimmt nicht überein";
const char txt_upload_failed[] PROGMEM = "Upload fehlgeschlagen. Aktivieren Sie die Protokollierungsoption 3, um weitere Informationen zu erhalten";
const char txt_upload_aborted[] PROGMEM = "Upload abgebrochen";
const char txt_upload_code[] PROGMEM = "Upload Fehlercode ";
const char txt_upload_error[] PROGMEM = "Update Fehlercode (see Updater.cpp) ";
const char txt_upload_sucess[] PROGMEM = "erfolgreich";
const char txt_upload_refresh[] PROGMEM = "Aktualisierung in";

//Page Init
const char txt_init_title[] PROGMEM = "Ersteinrichtung";
const char txt_init_reboot_mes[] PROGMEM = "Neustart und Verbindung zu deinem WLAN-Netzwerk wird hergestellt! Du solltest es in deiner AccessPoint Auflistung sehen.";
const char txt_init_reboot[] PROGMEM = "Neustart...";
`

[gysmo38]

Danke. I will added in next release :)