Home Assistant OS 10.0.rc2

[agners]

Changes

• updated generic_raw_uart and rpi-rf-mod to latest versions. (updated generic_raw_uart and rpi-rf-mod to latest versions. #2431) @jens-maus

Home Assistant Operating System

• Fix swapfile creation for all memory sizes (Fix swapfile creation for all memory sizes #2427) @agners

---

This discussion was created from the release Home Assistant OS 10.0.rc2.

[wastez]

And how can I change to v10.
Dev is already v11 (ok now there is no difference but soon)

And Beta Channel is still v9.5.

Would be great if v10 could be pushed to Beta Channel.

[yousaf465]

why you need root access when you have got glances

[yousaf465]

same issue with 10.0.

[agners]

What is the typical memory load on your system? See Settings > System > Hardware. You should not go beyond 80%. You can also use the system console to check:

ha > login
# free -h

[yousaf465]

What is the typical memory load on your system? See Settings > System > Hardware. You should not go beyond 80%. You can also use the system console to check:

ha > login
# free -h

usually it is 76%, but this 10.0, initially it increases to 96%, which is reduced to 56% on it's own after HA bootup and at least 3 hours have passed. during which many add-ons are closed automatically such as EQMX.

[yousaf465]

What is the typical memory load on your system? See Settings > System > Hardware. You should not go beyond 80%. You can also use the system console to check:

ha > login
# free -h

              total        used        free      shared  buff/cache   available
Mem:           1.8G        1.7G       47.0M           0       84.5M       61.4M
Swap:          4.0G        2.8G        1.2G
➜  ~

with 10.0