Robot stalls when using python SDK and wheel speeds

[TAC0C4T]

How are you connecting to your Create 3?

Bluetooth (Python SDK)

Computer(s) Model(s) and Operating System(s)

Thinkpad P43s Windows 11

Which version of ROS 2 is installed on your computer?

None

Which firmware version is installed on your robot?

G.4.3

Which RMW is your robot running?

I don't know

Does your robot have an assigned namespace? If so, please share.

No response

Is the robot connected to a network? If so, what is the network type?

No response

Are there multiple Create 3 robots connected to your network?

None

Is multicast enabled?

None

What is the Adapter Board's USB/BLE Toggle currently switched to?

None

Describe your question.

certain values cause a stall when using robot.set_wheel_speeds(left, right). See attached image. Why do these ones cause this behavior?

Edit: I believe this to most likely be a firmware issue (correct me if I am wrong) as this error persists when the robot is held upside down and there is no resistance on the wheels. This still happens for the green values and the red values do not stall in the same manner.