ChangeLog

2015-01-21 Jon McKenzie <jcmcken at gmail.com>
	* Version 3.4.0
	  - Added the --env option to ``pssh``, for use with ``--script``. This
	  allows the user to pass ``KEY=VALUE`` pairs to inject into the
	  environment of the executing script. E.g. ``pssh --script
	  /tmp/some-script.sh --env foo=bar ...etc...``. 
2014-04-06 Jon McKenzie <jcmcken at gmail.com>
	* Version 3.3.0
	  - Added the --copy-to option for pssh, which allows you to configure
	    where the script (--script) gets copied on the remote end.
	  - If a shebang line exists in the script passed to --script, the script
	    will be executed using the runtime from that shebang rather than a
	    straight execution. This fixes an issue where the --copy-to location
	    is a device mounted with the noexec option.
	  - Added the --runtime option for pssh, which allows you to manually set
	    the script (--script) runtime to use.
	  - Added the --debug option for all p-utilities. Currently not much is
	    logged, however.
	  - The --args option now correctly accepts multiple arguments.
	  - An RPM spec file for Red Hat Enterprise Linux 5/6 (and derivatives)
	    was added.
2012-12-29 Jon McKenzie <jcmcken at gmail.com>
	* Version 3.2.2
	  - Fixed a bug with --script where pssh would interpret a run as a success when
	    the script could not be written on the remote side due to a full disk device.
2012-05-04 Jon McKenzie <jcmcken at gmail.com>
	* Version 3.2.1
	  - Added --args companion option for --script, for passing arguments to
	    the script when run on remote host.
2012-02-05 Jon McKenzie <jcmcken at gmail.com>
	* Version 3.1.1
	  - Fixed a bug with blank lines in host files (Issue #20).
	  - Fixed Python 2.4 compatibility vis-a-vis the hashlib module. (Issue
	  #21)
	  - Fixed Python 2.5/2.6 compatibility vis-a-vis use of the special _sqlite
	  module. (Issue #22)
2012-01-16 Jon McKenzie <jcmcken at gmail.com>
	* Version 3.1.0
	  - Added PSSH --sudo companion option for --script, which executes the script as root 
	    if user has passwordless sudo permissions.
2012-01-15 Jon McKenzie <jcmcken at gmail.com>
	* Version 3.0.0
	  - Added -s/--summary option, for printing success/failure summary after a run
	  - Added -B/--progress-bar option, for printing a progress bar instead of task
		output.
	  - Added --sample-size option, for running against a host sample
	  - Added --host-regexp option, for filtering hosts based on a regular expression
	  - Added -T/--test option, for splitting up a run so that you can first verify
		your command succeeds on a small number of servers before continuing on the rest.
	  - Added a -F/--fork-hosts option, which outputs all successful hosts to one file and all
	    failed hosts to another file. Useful for running follow-up tasks
	  - Added --sqlite-db option for PSSH. After a run, dumps all task data to a sqlite DB.
	  - Added --pickle-file option for PSSH. After a run, pickles all task data and dumps to file.
	  - Added --script option for PSSH. Runs supplied script on all remote machines instead of
	    running the given command.
	  - Help output for all scripts now uses option groups, making it more readable
	  - UI functionality split out into its own submodule 'psshlib.ui'
	  - Host lists are now computed using the ServerPool class in the new submodule
		'psshlib.hosts'
	  - Refactored and minified all scripts. All logic is now implemented in 'psshlib.cli'. 
	    Makes it easy to programmatically call any of the CLIs without hacking at sys.path
	  - Completely refactored many parts of the API, making things easier to maintain and
	    extend.
2011-02-02 Andrew McNabb <amcnabb at mcnabbs.org>
	* Version 2.2.2
	  - Fixed two crashes (issues 35 and 36).  One affects Python <= 2.5
	    and the other affects all of the scripts except pssh.
2011-01-26 Andrew McNabb <amcnabb at mcnabbs.org>
	* Version 2.2.1
	  - Fixed a crash when the -l option was used in conjunction with a
	    hosts file (issue #34).
2011-01-21 Andrew McNabb <amcnabb at mcnabbs.org>
	* Version 2.2
	  - Added a basic man page for pssh (issue #10).
	  - Fixed askpass to work correctly in the presence of non-password
	    prompts from ssh (issue #23).
	  - Updated the -O option so that it can be specified multiple times
	    (issue #25).  Thanks to soham.mehta for the patch.
	  - Fixed host file loader to give an error instead of a backtrace
	    if a file is not found.
	  - Fixed prsync's "-ssh-args" mangling of its argument (issue #24).
	    Thanks to jbyers for the patch.
	  - Fixed some variable names to appease pylint.  Thanks to solj for
	    the patch.
	  - Improved pscp to be able to copy multiple local files.  Thanks
	    to Carlo Marcelo Arenas Belon for the patch.
	  - Deprecated the PSSH_HOSTS environment variable that seems to
	    cause more problems than it's worth.
	  - Added the ability to set multiple hosts with a single -H flag
	    (issue #26). Thanks to ilya@sukhanov.net for the patch.
	  - Stopped passing "-q" to ssh by default (this masked error messages
	    and reduced usability).
	  - Removed automatic reading from stdin (deprecated in version 2.1).
	    Please use the "-I" option instead.
	  - Added meaningful exit status codes (issue #30).
	  - Other minor fixes
2010-02-26 Andrew McNabb <amcnabb at mcnabbs.org>
	* Version 2.1.1
	  - Fixed a problem causing PSSH to crash with Python 2.4.
2010-02-24 Andrew McNabb <amcnabb at mcnabbs.org>
	* Version 2.1
	  - Added support for Python 3.0 and 3.1.  Although PSSH has only
	    been lightly tested with Python 3, anything that doesn't work
		in Python 3 is officially a bug.
	  - Added a "-H" option for specifying hosts one-by-one instead of
	    or in addition to a hosts file.
	  - Added "-x" and "-X" options for passing extra command-line
	    arguments to ssh and rsync.  Also added a "-S" option to prsync
		for the special case of passing extra arguments to ssh
		(issue #2).
	  - Added a "-I" option for specifying that pssh should read from
	    standard input, and added a deprecation warning when standard
		input is used without this option (issue #12).
	  - Made the command argument optional when the "-I" option is
	    given, so a script can be passed to pssh on standard input
		(issue #5).
	  - If a username or port is given, these are now included in the
	    output filename, which allows different connections to be
		distinguished from each other (issue #7).
	  - Added the pssh-askpass wrapper as a standalone script because
	    setup.py was removing the executable bit from askpass.py.  This
		fixes a "permission denied" error when using the -A option
		(issue #8).
	  - Fixed a problem where pssh was unnecessarily specifying a
	    username (issue #14).
	  - Fixed a delay due to a lost SIGCHLD signal.
	  - Removed extra spaces between output chunks in outdir files
	    (issue #6).  Thanks to knutsen for the fix.
	  - Fixed a bug where pscp passed the wrong option for sending scp
	    a custom port.  Thanks to Jan Rafaj for the patch.
	  - Fixed prsync to send the port as an option to ssh (issue #1).
	    Thanks to Ryan Brothers for the fix.
2009-10-20 Andrew McNabb <amcnabb at mcnabbs.org>
	* Version 2.0
	  - Rewrote communication code to be more efficient.  PSSH now
	    operates with only one or two threads.
	  - Added the ability to interrupt PSSH (with CTRL-c).
	  - Added an option to prompt for a password.
	  - Refactored code into a distinct library (psshlib).
2008-10-12 Brent N. Chun <bnc at theether.org>
	* Version 1.4.3
	  - Fixed bug in select_wrap.  If timeout is None (e.g., the
	    default for prsync, etc.), then never time out.  Bug reported
	    by Carlo Marcelo Arenas Belon (carenas at sajinet.com.pe).
	  - Catch getopt exceptions and print usage as well as getopt
	    exception string.  Contribution from Carlo Marcelo Arenas
	    Belon (carenas at sajinet.com.pe).
	  - Added contribution from Bas van der Vlies (basv at sara.nl)
	    to allow comments in hosts file.  Comments must begin with
	    # character (leading whitespace is also allowed).
	  - Restore file status bugs after reading stdin in pssh.
	  - Fixed typo bug in pslurp when using options and in
	    non-recursive mode.
	  - Removed conflicts with built-in names.
2008-09-01 Brent N. Chun <bnc at theether.org>
	* Version 1.4.2
	  - Fixed minor bug: select returns select.error on an error,
	    not OSError.
2008-08-27 Brent N. Chun <bnc at theether.org>
	* Version 1.4.1
	  - Removed broken SIGCHLD handler.
	  - Refining subprocess _cleanup dynamically to an empty lambda
	    function since subprocess is not thread-safe and we already
	    call wait on child processes ourselves anyway.
	  - Adding missing verbose flag to rest of bin/* programs.
2008-08-24  Brent N. Chun <bnc at theether.org>
	* Version 1.4.0
	  - Fixed 64-bit bug in pslurp, pscp, prsync.  Previously, the
	    default select timeout was sys.maxint, but this is a 64-bit
	    value on 64-machines. Now using None when calling select when
	    there is no timeout.  Bug reported by (buixor at gmail.com).
	  - Catching EINTR and ignoring it for select, read, write in
	    BaseThread class.
	  - Fixed longopts for pnuke, prsync, pscp, pslurp, pssh (bug
	    reported a Debian user via Andrew Pollock (apollock at
	    debian.org)).
	    Reference: "bug #481901: pssh: options mis-specified"
	  - Added missing environment variables for options for pnuke,
	    prsync, pscp, pslurp, pssh.
2008-06-04  Brent N. Chun <bnc at theether.org>
	* Version 1.3.2
	  - Added shortopts bug fix from Lev Givon (lev at
	    columbia.edu) in bin/pssh.
2007-04-11  Brent N. Chun <bnc at theether.org>
	* Version 1.3.1
	  - Reverted I/O back to 1.2.2. style pssh I/O.
2007-04-10  Brent N. Chun <bnc at theether.org>
	* Version 1.3.0
	  - Added contributions from Deepak Giridharagopal (deepak at
	    brownman.org)
	    * Added ANSI color to pssh, pscp, etc. output.
	    * Each status message now includes a timestamp.
	    * Failures now indicate the cause (e.g., timeout, etc.)
	    * Intermediate directories are created as needed for output.
	    * Removed use of setsid in shell exec.
	    * Using Exception objects rather than raw strings.
	    * Added support for piping stdin to each ssh process.
	    * Added -i option to pssh for "inlining" output to stdout.
	    * Added Python setup.py file for a standard install.
	  - Switched to BSD license.
2006-06-18  Brent N. Chun <bnc at theether.org>
	* Version 1.2.2
	  - Added patch from Dan Silverstein (dans at pch.net) to fix
	    parsecmdline bug.
2005-12-31  Brent N. Chun <bnc at theether.org>
	* Version 1.2.1
	  - Changed sys.path so pssh can run without RPM
	    install.
	  - Changed RPM library files to install in
	    /usr/local/lib/python
	  - make install and make uninstall now work as
	    expected for installations from source.
2004-11-10  Brent N. Chun <bnc at intel-research.net>
	* Added patch from Dave Barr <barr at google.com>
	  - Adds -a, -z flags to prsync
2004-10-05  Brent N. Chun <bnc at intel-research.net>
	* Default user is now current user in all programs (on 
	  suggestion from Jim Wight <j.k.wight at newcastle.ac.uk>).
	* Fixed path typo on prsync from 1.1.0 release
	* Version 1.1.1
2004-10-04  Brent N. Chun <bnc at intel-research.net>
	* Added patch from Dave Barr <barr at google.com>
	  - Adds an ssh options flag (-O) to prsync
	* Added patch from Chad Yoshikawa <chadyoshikawa at gmail.com>
	  - Adds a print to stdout flag (-P) to pssh
	* Version 1.1.0
2004-08-21  Brent N. Chun <bnc at intel-research.net>
	* All cmds now take -o, -e for stdout, stderr
	* Checking return values for all cmds
	* Factored common thread structure out of all cmds
	* Changed pslurp's dir for local to -L, rather than -o (stdout)
	* Version 1.0.0
2003-11-20  Brent N. Chun <bnc at intel-research.net>
	* Added handler for SIGCHLD
	* Wait for all threads before returning to main thread
	* Kill all straggler processes when done 
2003-11-18  Brent N. Chun <bnc at intel-research.net>
	* Added pslurp (scp from remote nodes), updated to 0.2.3
2003-11-12  Brent N. Chun <bnc at intel-research.net>
	* Fixed read bug, so all output is obtained.
	* Added timeout option (defaults to None for pscp/prsync)
	* Added verbose option for pssh/pnuke (this is -q or not)
	* Added environment variables for options
	* Fixed usage for pnuke
2003-09-06  Brent N. Chun <bnc at intel-research.net>
	* Added -O for pssh, pscp, and pnuke for passing SSH options
	* Changed order of options in usage (required, optional)
2003-09-06  Brent N. Chun <bnc at intel-research.net>
	* Added parallel rsync (prsync)
	* Added support for "host[:port] user" lines in hosts files
	* Factored a bit of code out into lib/python/psshutil.py
2003-08-16  Brent N. Chun <bnc at intel-research.net>
	* Initial version (0.1.0)