- A Thymio robot
- Odroid C1 or C1+: a powerful quad-core ARM Linux board with 1 GB SDRAM, 16 GB flash memory, 4 USB ports
- A 16 GB eMMC card
- A USB power pack that output at least 2 A to powers the robot for several hours. We recommend this one or one with similar size
- Odroid UPS: a Li-Po battery that provides power when swapping power packs
- A USB web camera fixed by a tiltable clap
- A Wi-Fi dongle that provides wireless networking.
- A short micro USB cable (5-10 cm)
- A USB-A plug to ODROID connector plug 2.5 mm/0.8 mm
- Lego parts to build the chassis (colors are by your choices :-)):
| 8 x |  |
300301 | BRICK 2X2 - White |
| 2 x |  |
389524 | TECHNIC BRICK 1X12, Ø4,9 - Bright Yellow |
| 4 x |  |
302201 | PLATE 2X2 - White |
| 4 x |  |
302101 | PLATE 2X3 - White |
| 2 x |  |
303423 | PLATE 2X8 - Bright Blue |
- Mount the UPS Board on top of the Odroid
- Use the included spacers and screws to the two 1x12 Lego Technic Bricks at the two opposite end of the Odroid.
- Use the Lego bricks to build the rest of the chassis.
- Plug-in the camera and fix in on top of the Li-Po battery
- Insert the battery pack in the chassis slot and connect it to the UPS battery.
- Plug-in the WiFi dongle
- Connect the Odroid and the Thymio with the micro USB cable.