Skip to content

Latest commit

 

History

History
174 lines (141 loc) · 9.9 KB

Electron-Transfer.md

File metadata and controls

174 lines (141 loc) · 9.9 KB
Raw

Electron Transfer

The NWChem electron transfer (ET) module calculates the electronic coupling energy (also called the electron transfer matrix element) between ET reactant and product states. The electronic coupling ($V_{RP}$), activation energy ($\Delta G^{*}$), and nuclear reorganization energy (λ) are all components of the electron transfer rate defined by Marcus' theory, which also depends on the temperature (see Reference 1 below):

${k_{ET}}= \frac{2\pi}{\hbar} V_{RP}^{2} \frac{1}{\sqrt{4\pi \lambda k_{B}T}} \exp \left( \frac{- \Delta G^{*}}{k_{B} T} \right)$

The ET module utilizes the method of Corresponding Orbital Transformation to calculate $V_{RP}$. The only input required are the names of the files containing the open-shell (UHF) MO vectors for the ET reactant and product states (R and P).

The basis set used in the calculation of $V_{RP}$ must be the same as the basis set used to calculate the MO vectors of R and P. The magnitude of $V_{RP}$ depends on the amount of overlap between R and P, which is important to consider when choosing the basis set. Diffuse functions may be necessary to fill in the overlap, particularly when the ET distance is long.

The MO's of R and P must correspond to localized states. for instance, in the reaction $A^{ -} B \rightarrow A B^{ -}$ the transferring electron is localized on A in the reactant state and is localized on B in the product state. To verify the localization of the electron in the calculation of the vectors, carefully examine the Mulliken population analysis. In order to determine which orbitals are involved in the electron transfer, use the print keyword "mulliken ao" which prints the Mulliken population of each basis function.

An effective core potential (ECP) basis can be used to replace core electrons. However, there is one caveat: the orbitals involved in electron transfer must not be replaced with ECP's. Since the ET orbitals are valence orbitals, this is not usually a problem, but the user should use ECP's with care.

Suggested references are listed below. The first two references gives a good description of Marcus' two-state ET model, and the appendix of the third reference details the method used in the ET module.

  1. R.A. Marcus, N. Sutin, Biochimica Biophysica Acta 35, 437, (1985).
  2. J.R. Bolton, N. Mataga, and G. McLendon in "Electron Transfer in Inorganic, Organic and Biological Systems" (American Chemical Society, Washington, D.C., 1991)
  3. A. Farazdel, M. Dupuis, E. Clementi, and A. Aviram, J. Am. Chem. Soc., 112, 4206 (1990).

VECTORS -- input of MO vectors for ET reactant and product states

 VECTORS [reactants] 
 VECTORS [products ] 

In the VECTORS directive the user specifies the source of the molecular orbital vectors for the ET reactant and product states. This is required input, as no default filename will be set by the program. In fact, this is the only required input in the ET module, although there are other optional keywords described below.

FOCK/NOFOCK -- method for calculating the two-electron contribution to $V_{RP}$

  <string (FOCK||NOFOCK) default FOCK>

This directive enables/disables the use of the NWChem's Fock matrix routine in the calculation of the two-electron portion of the ET Hamiltonian. Since the Fock matrix routine has been optimized for speed, accuracy and parallel performance, it is the most efficient choice.

Alternatively, the user can calculate the two-electron contribution to the ET Hamiltonian with another subroutine which may be more accurate for systems with a small number of basis functions, although it is slower.

TOL2E -- integral screening threshold

 TOL2E <real tol2e default max(10e-12,min(10e-7, S(RP)*10e-7 )>

The variable tol2e is used in determining the integral screening threshold for the evaluation of the two-electron contribution to the Hamiltonian between the electron transfer reactant and product states. As a default, tol2e is set depending on the magnitude of the overlap between the ET reactant and product states ($S_{RP}$), and is not less than 1.0d-12 or greater than 1.0d-7.

The input to specify the threshold explicitly within the ET directive is, for example:

 tol2e 1e-9

FMO -- Fragment Orbital Approach

The keyword FMO can be used to compute electronic couplings by means of the fragment orbital approach (EF Valeev, V Coropceanu, DA da Silva Filho, S Salman, JL Bredas,. J. Am. Chem. Soc., 128, 9882 (2006))

fmo

An example input file can be found in the etrans-fmo QA directory

Example

The following example is for a simple electron transfer reaction, $He_{} \rightarrow He^{ +}$. The ET calculation is easy to execute, but it is crucial that ET reactant and product wavefunctions reflect localized states. This can be accomplished using either a fragment guess, or a charged atomic density guess. For self-exchange ET reactions such as this one, you can use the REORDER keyword to move the electron from the first helium to the second.

Example input :

#ET reactants:  
charge 1  
scf   
  doublet; uhf; vectors input fragment HeP.mo He.mo output HeA.mo  
# HeP.mo are the vectors for He(+),   
# He.mo  are the vectors for neutral He.  
end  
task scf  
  
#ET products: 
charge 1  
scf   
  doublet; uhf; vectors input HeA.mo reorder 2 1 output HeB.mo  
end  
task scf  
  
et  
 vectors reactants HeA.mo   
 vectors products HeB.mo  
end  
task scf et

Here is what the output looks like for this example:

                          Electron Transfer Calculation  
                          -----------------------------  
  
MO vectors for reactants: HeA.mo  
MO vectors for products : HeB.mo  
  
Electronic energy of reactants     H(RR)      -5.3402392824  
Electronic energy of products      H(PP)      -5.3402392824  
  
Reactants/Products overlap         S(RP)      -0.0006033839  
  
Reactants/Products interaction energy:  
-------------------------------------  
One-electron contribution         H1(RP)       0.0040314092  
  
Beginning calculation of 2e contribution  
Two-electron integral screening (tol2e) : 6.03E-11  
  
Two-electron contribution         H2(RP)      -0.0007837138  
Total interaction energy           H(RP)       0.0032476955  
  
Electron Transfer Coupling Energy |V(RP)|      0.0000254810  
                                                      5.592 cm-1  
                                                   0.000693 eV  
                                                      0.016 kcal/mol

The overlap between the ET reactant and product states ($S_{RP}$) is small, so the magnitude of the coupling between the states is also small. If the fragment guess or charged atomic density guess were not used, the Mulliken spin population would be 0.5 on both He atoms, the overlap between the ET reactant and product states would be 100 % and an infinite $V_{RP}$ would result.