Skip to content

Latest commit

 

History

History
137 lines (112 loc) · 3.82 KB

README.md

File metadata and controls

137 lines (112 loc) · 3.82 KB
Raw

Quagga Routing Module

This module configures GRE tunnels and then uses Quagga (ospfd and bgpd) to do dynamic routing across the tunnels.

I'll do some refactoring over the next few weeks to add IPSEC support, as well as make it so you can mix OSPF and BGP and control whether or not to share routes between the two protocols.

License

Apache v2.0

Contact

Jonathan Creasy [email protected]

Support

Please log tickets and issues on the issues tab

Examples

/usr/bin/puppet apply  --verbose --confdir ./ --modulepath ./modules ./manifests/quagga.pp

Define your peers:

$peer1 = '65.175.90.34'
$peer2 = '199.119.124.102'
$peer3 = '199.119.123.200'

Each peer needs to have some information:

    $lan_interface    = 'virbr0'
    $lan_description  = 'LAN'
    $lan_cidr         = '192.168.122.0/24'
    $asn              = '65531'
    $tunnels = {
      'tun0' => { 'peer' => $peer2, 'interface' => 'tun0', 'description' => 'peer2', 'local' => '10.0.0.1', 'remote' => '10.0.0.2', 'remoteasn' => '65532' },
      'tun1' => { 'peer' => $peer3, 'interface' => 'tun1', 'description' => 'peer3', 'local' => '10.0.0.5', 'remote' => '10.0.0.6', 'remoteasn' => '65533' }
    }

I use this switch statement to define the standard variables for each peer:

case $fqdn {
  'peer1': {
    $lan_interface    = 'virbr0'
    $lan_description  = 'LAN'
    $lan_cidr         = '192.168.122.0/24'
    $asn              = '65531'
    $tunnels = {
      'tun0' => { 'peer' => $peer2, 'interface' => 'tun0', 'description' => 'peer2', 'local' => '10.0.0.1', 'remote' => '10.0.0.2', 'remoteasn' => '65532' },
      'tun1' => { 'peer' => $peer3, 'interface' => 'tun1', 'description' => 'peer3', 'local' => '10.0.0.5', 'remote' => '10.0.0.6', 'remoteasn' => '65533' }
    }
  }
  'peer2': {
    $lan_interface    = 'bond1.4001'
    $lan_description  = 'LAN'
    $lan_cidr         = '10.50.66.0/24'
    $asn              = '65532'
    $tunnels = {
      'tun0' => { 'peer' => $peer1, 'interface' => 'tun0', 'description' => 'peer1', 'local' => '10.0.0.2', 'remote' => '10.0.0.1', 'remoteasn' => '65531' },
      'tun2' => { 'peer' => $peer3, 'interface' => 'tun2', 'description' => 'peer3', 'local' => '10.0.0.9', 'remote' => '10.0.0.10', 'remoteasn' => '65533' }
    }
  }
  'peer3': {
    $lan_interface    = 'em3'
    $lan_description  = 'LAN'
    $lan_cidr         = '192.168.4.1/24'
    $asn              = '65533'
    $tunnels = {
      'tun1' => { 'peer' => $peer1, 'interface' => 'tun1', 'description' => 'peer1', 'local' => '10.0.0.6', 'remote' => '10.0.0.5', 'remoteasn' => '65531' },
      'tun2' => { 'peer' => $peer2, 'interface' => 'tun2', 'description' => 'peer2', 'local' => '10.0.0.10', 'remote' => '10.0.0.9', 'remoteasn' => '65532' }
    }
  }
}

Create the GRE tunnels:

define create_tunnels($peer, $interface, $description, $local, $remote, $remoteasn) {
  routing::gre { "tunnel_to_${peer}":
    peer_outer_ip => $peer,
    peer_inner_ip => $remote,
    my_inner_ip   => $local,
    interface     => $interface,
  }
}

create_resources (create_tunnels, $tunnels)

Now start configuring the routing protocols:

class { 'routing::zebra':
  lan_interface   => $lan_interface,
  lan_description => $lan_description,
  lan_cidr        => $lan_cidr,
  tunnels         => $tunnels,
}

Use OSPF:

class { 'routing::disable::bgpd': }
class { 'routing::ospfd':
  lan_interface   => $lan_interface,
  lan_description => $lan_description,
  lan_cidr        => $lan_cidr,
  tunnels         => $tunnels,
}

Or BGPD:

class { 'routing::disable::ospfd': }
class { 'routing::bgpd':
  lan_interface   => $lan_interface,
  lan_description => $lan_description,
  lan_cidr        => $lan_cidr,
  tunnels         => $tunnels,
}