Skip to content
This repository has been archived by the owner on May 12, 2021. It is now read-only.

Latest commit

 

History

History
123 lines (90 loc) · 3.86 KB

zun_kata.md

File metadata and controls

123 lines (90 loc) · 3.86 KB

OpenStack Zun DevStack working with Kata Containers

Introduction

This guide describes how to get Kata Containers to work with OpenStack Zun using DevStack on Ubuntu 16.04. Running DevStack with this guide will setup Docker and Clear Containers 2.0, which you replace with Kata Containers. Currently, the instructions are based on the following links:

Install Git to use with DevStack

$ sudo apt install git

Setup OpenStack DevStack

The following commands will sync DevStack from GitHub, create your local.conf file, assign your host IP to this file, enable Clear Containers, start DevStack, and set the environment variables to use zun on the command line.

$ sudo mkdir -p /opt/stack
$ sudo chown $USER /opt/stack
$ git clone https://github.com/openstack-dev/devstack /opt/stack/devstack
$ HOST_IP="$(ip addr | grep 'state UP' -A2 | tail -n1 | awk '{print $2}' | cut -f1 -d'/')"
$ git clone https://github.com/openstack/zun /opt/stack/zun
$ cat /opt/stack/zun/devstack/local.conf.sample \
$     | sed "s/HOST_IP=.*/HOST_IP=$HOST_IP/" \
$     > /opt/stack/devstack/local.conf
$ sed -i "s/KURYR_CAPABILITY_SCOPE=.*/KURYR_CAPABILITY_SCOPE=local/" /opt/stack/devstack/local.conf
$ echo "ENABLE_CLEAR_CONTAINER=true" >> /opt/stack/devstack/local.conf
$ echo "enable_plugin zun-ui https://git.openstack.org/openstack/zun-ui" >> /opt/stack/devstack/local.conf
$ /opt/stack/devstack/stack.sh
$ source /opt/stack/devstack/openrc admin admin

The previous commands start OpenStack DevStack with Zun support. You can test it using runc as shown by the following commands to make sure everything installed correctly and is working.

$ zun run --name test cirros ping -c 4 8.8.8.8
$ zun list
$ zun logs test
$ zun delete test

Install Kata Containers

Follow these instructions to install the Kata Containers components.

Update Docker with new Kata Containers runtime

The following commands replace the Clear Containers 2.x runtime setup with DevStack, with Kata Containers:

$ sudo sed -i 's/"cor"/"kata-runtime"/' /etc/docker/daemon.json
$ sudo sed -i 's/"\/usr\/bin\/cc-oci-runtime"/"\/usr\/bin\/kata-runtime"/' /etc/docker/daemon.json
$ sudo systemctl daemon-reload
$ sudo systemctl restart docker

Test that everything works in both Docker and OpenStack Zun

$ sudo docker run -ti --runtime kata-runtime busybox sh
$ zun run --name kata --runtime kata-runtime cirros ping -c 4 8.8.8.8
$ zun list
$ zun logs kata
$ zun delete kata

Stop DevStack and clean up system (Optional)

$ /opt/stack/devstack/unstack.sh
$ /opt/stack/devstack/clean.sh

Restart DevStack and reset CC 2.x runtime to kata-runtime

Run the following commands if you already setup Kata Containers and want to restart DevStack:

$ /opt/stack/devstack/unstack.sh
$ /opt/stack/devstack/clean.sh
$ /opt/stack/devstack/stack.sh
$ source /opt/stack/devstack/openrc admin admin
$ sudo sed -i 's/"cor"/"kata-runtime"/' /etc/docker/daemon.json
$ sudo sed -i 's/"\/usr\/bin\/cc-oci-runtime"/"\/usr\/bin\/kata-runtime"/' /etc/docker/daemon.json
$ sudo systemctl daemon-reload
$ sudo systemctl restart docker

Kata Zun image 1

Figure 1: Create a BusyBox container image

Kata Zun image 2

Figure 2: Select kata-runtime to use

Kata Zun image 3

Figure 3: Two BusyBox containers successfully launched

Kata Zun image 4

Figure 4: Test connectivity between Kata Containers

Kata Zun image 5

Figure 5: CLI for Zun