* These parts are not tested by me because I did not buy them. I replaced them with things I already had.
| Qty | Name | Aliexpress (for reference) |
|---|---|---|
| ----------- Bottle Cutter ------------ | ||
| 2 | Bearing 8x22x7 mm 608ZZ | https://s.click.aliexpress.com/e/_DDu60K3 |
| *2 | M8 Hex Bolt 60mm Full Thread (instead I use 8mm rod thereaded cut to 41 and 47mm) | https://s.click.aliexpress.com/e/_DF8rC8x |
| *3(5) | Hex Nut M8 | https://s.click.aliexpress.com/e/_DdAzvUJ |
| *1 | Hexagonal Bolt Partial Thread M8 40mm DIN931 | https://s.click.aliexpress.com/e/_DCCHxur |
| *3 | Flat Washer M8 16x1x1.5 | https://s.click.aliexpress.com/e/_DdBx3SF |
| *2 | M8 Hex Nylon Insert Lock Nut Self-locking Locknut | https://s.click.aliexpress.com/e/_At5Tpj |
| *1 | Threaded Rod 6mm (>=48cm) (any 6mm rod will work, I used a carbon fiber rod from a kite) | https://s.click.aliexpress.com/e/_DEQQjrz |
| ----------- Electronics -------------- | ||
| 1 | Power Supply 12v 5A | https://s.click.aliexpress.com/e/_DEF56Ef |
| 1 | Wemos D1 MINI V3.0.0 | https://s.click.aliexpress.com/e/_9GGvad |
| 1 | Mini DC-DC 12-24V To 5V 3A Step Down | https://s.click.aliexpress.com/e/_A8abPX |
| 1 | Mini Micro Limit Switch Roller Lever Arm | https://s.click.aliexpress.com/e/_DdlHBbr |
| 1 | A4988 DRV8825 Stepper Motor Driver With Heat sink | https://s.click.aliexpress.com/e/_AMKH4t |
| 1 | Nema 17 stepper motor 42 motor height 38mm 1.2A D shaped shaft | https://s.click.aliexpress.com/e/_AfngLT |
| 1 | IRLZ44N MOSFET | https://s.click.aliexpress.com/e/_Dk1JsKh |
| 1 | Hotend MK8 Extrusion Aluminum Block 20x20x10mm with Thermistor Ceramic and Heater 12V 40W | https://s.click.aliexpress.com/e/_9QSRwl |
| 1 | capacitor 100uf 16V | https://s.click.aliexpress.com/e/_DkEQAV5 |
| 3 | pin header | https://s.click.aliexpress.com/e/_DEzMmjj |
| 3 | terminal blocks 2P | https://s.click.aliexpress.com/e/_DdfJlAb |
| 2 | 10K ohms resistors | https://s.click.aliexpress.com/e/_DBcOxjR |
| *50cm | 2 wire cable for limit switch, digital signal | https://s.click.aliexpress.com/e/_Dlnn1bd |
| *50cm | 2 wire cable for 5A+ | https://s.click.aliexpress.com/e/_Dlnn1bdd |
| 1 | 10A 250V Inlet Module Plug Rocker Switch Male Power Socket 3 Pin IEC320 C14 switch + Fuse New | https://s.click.aliexpress.com/e/_DmuNpxf |
| ----------- Hardware ---------------- | ||
| 18 | Screw M2 x 16mm (100pcs) (union between large gears and pulley) | https://s.click.aliexpress.com/e/_Dcg0sln |
| 1 | MK8 Brass Nozzle 0.4MM | https://s.click.aliexpress.com/e/_ANswWD |
| 4 | Bearing 8x22x7 mm 608ZZ | https://s.click.aliexpress.com/e/_DDu60K3 |
| 1 | Stainless Steel 90 Degree Angle Bracket Corner 20x20mm | https://s.click.aliexpress.com/e/_ACOtVF |
| *2 | M8 x 100mm A2 Hex Head Screw Bolt (instead I use 2x 8mm rod thereaded cut to 10cm) | https://s.click.aliexpress.com/e/_AY2LNb |
| *2(4) | M8 Hex Nylon Insert Lock Nut Self-locking Locknut | https://s.click.aliexpress.com/e/_At5Tpj |
| *1 | M3 8mm Bolt for the motor gear | https://s.click.aliexpress.com/e/_DelUMSF |
| *3 | M3 14mm Bolt for motor mount | https://s.click.aliexpress.com/e/_DelUMSF |
| *50cm | Paracord 2mm(nylon string) (I used polyester thread for kite handles) | https://s.click.aliexpress.com/e/_99oV2Hv |
| *1 | 1.7mm drill bit | https://s.click.aliexpress.com/e/_DD1SYVV |