New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

RESEARCH #3

Open

Kreyren opened this issue Aug 24, 2019 · 0 comments

Assignees

Member

Kreyren commented Aug 24, 2019 •

edited

Loading

TLDR:

input -> FULL BRIDGE RECTIFIER!!! -> transistor -> high frequency transformer -> diodes -> inductor -> capacitor -> another inductor -> capacitor -> output then the output is fed into a feedback loop, which basically tell the control IC how off the output is

the feedback cause the controller to make the transistor on and off for a different duty cycle. For example, a 12V psu could be 100% at 12V and 0% at 12.2V

Resources:

https://www.smps.us/topologies.html
http://www.pavouk.org/hw/en_atxps.html
Simulator of electric current - https://falstad.com/circuit/circuitjs.html

https://youtu.be/X4EUwTwZ110?t=413

Smooth DC from AC

Motherboard main power connector pinning

Kreyren self-assigned this

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment